リックステクノ List of Products and Services

The "Kyuro Filter QR300-4" is a product that can easily handle the suction filtration and dewatering of chips and contaminants in the tank. It is portable and can sequentially filter tanks within the factory. It is capable of filtering various water systems, not only for industrial use but also for cleaning in the food industry (agriculture and fisheries). Using it as a primary treatment before a precision filtration device can also lead to cost reduction. 【Features】 ■ Capable of capturing a large amount of fine chips (maximum capture capacity 15L) ■ Powered solely by air ■ Low cost and simple structure, making filter replacement easy ■ Suction filtration possible even while the machine is operating ■ Nominal filtration accuracy: 10μm *For more details, please refer to the PDF document or feel free to contact us.

• Filtration Equipment

"Kyuuin-kun" is a floating oil recovery device that stabilizes the suction inlet by having the nozzle move vertically from the float section. It can also be used in heated tanks up to 90°C. Since there are no moving parts, there are no mechanical failures. Additionally, the length of the suction nozzle can be adjusted based on tank conditions. [Features] ■ The nozzle moves vertically from the float section, stabilizing the suction inlet. ■ Usable in heated tanks up to 90°C. ■ No moving parts, so there are no mechanical failures (no pump or motor required). *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "MX-600C" is an automatic coolant dilution device that can automatically supply coolant liquid at a set concentration. Case Study 1: In an automotive parts manufacturing factory, one unit of this machine supplies coolant to 20 to 30 processing machines. POINT: With a supply rate of 50L/min, it can supply multiple processing machines with the same oil. Case Study 2: In a 24-hour operating parts manufacturing factory, coolant is supplied to each processing machine after the morning meeting. POINT: By connecting piping to each processing machine, there is no need to transport coolant liquid. When the hand valve at the outlet is opened, coolant liquid is supplied. Case Study 3: In rough machining and finishing machining processes, the dilution rate is supplied at their respective set values. POINT: Since coolant liquid is generated each time during supply, it is possible to branch into two or more systems. *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "MX-600C" is an automatic coolant dilution device that can automatically supply coolant liquid at a set concentration. Coolant liquid, which is essential for machining in machine tools, is often mixed by hand, which can lead to inconsistencies that result in machining defects. Our device automatically supplies the coolant while stirring the oil to achieve the set concentration based on the amount of supplied industrial water. By using a highly accurate flow meter for management, the dilution accuracy can be maintained within ±0.2% of the set value. By reducing management workload and minimizing inconsistencies in coolant mixing, it contributes to stable machining quality. Additionally, eliminating excess oil supply leads to cost savings. 【Features】 ■ Patent obtained ■ Automatic management of coolant liquid concentration ■ Space-saving design ■ Simple setting of dilution ratios and accurate supply of diluted liquid ■ Supports dilution rates from 1.0% to 20.0% with accuracy of ±0.2% ■ Supply of water only is also possible (0% setting available) ■ Tankless design by directly supplying concentrated liquid into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "RXB" is an NC high-pressure cleaning machine capable of precision cleaning small parts and components with short cycle times. With a 2 to 8 index system, it allows for the use of high-pressure cleaning, overall cleaning, and air blowing at each station. High-pressure rotary insertion cleaning is also possible for the interiors of holes and blind holes in the workpieces. By processing 2 to 8 pieces simultaneously, even shorter cleaning cycle times can be achieved. Examples of target workpieces include injector-related components and other precision small parts. By combining with a vacuum drying station, it can also accommodate complete drying. 【Features】 ■ Capable of precision cleaning small parts and components with short cycle times ■ 2 to 8 index system ■ High-pressure rotary cleaning for the interiors of holes and blind holes in workpieces ■ Simultaneous processing of 2 to 8 pieces is possible ■ Vacuum drying station can also be installed *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

The "MX-600C" is a coolant automatic dilution device that allows for simple setting of dilution ratios and accurate supply of dilution liquid. By directly sending the concentrated solution into the water piping and delivering it while stirring, the stirring efficiency is between 97% and 100%. This reduces the foaming that occurs during stirring in the tank. Additionally, because the concentrated solution is sent directly into the water piping, it features a tankless design. This allows for space-saving installation. Since there is no need to store coolant liquid in a tank, it is possible to supply liquids with different dilution rates. Dilution rates can be set by system type (optional feature). 【Features】 ■ Patented ■ Simple setting of dilution ratios and accurate supply of dilution liquid ■ Supports dilution rate settings from 1.0% to 20.0% with an accuracy of ±0.2% ■ Supply of water only is also possible (0% setting available) ■ Tankless design by sending concentrated solution directly into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "RXA" is an NC high-pressure cleaner that allows nozzle access to any part regardless of the workpiece shape, thanks to its 5-axis NC control. Additionally, by changing the nozzle, it enables high-precision targeted cleaning, high-pressure rotary cleaning for the interiors of holes in the workpiece, as well as overall cleaning over a wide area. 【Features】 ■ Nozzle access to any part regardless of workpiece shape due to 5-axis NC control ■ High-precision targeted cleaning and overall cleaning over a wide area are possible ■ High-pressure rotary cleaning for the interiors of holes in the workpiece and blind holes is possible *For more details, please download the PDF or feel free to contact us.

• High pressure cleaner

The "MX-600C" is a coolant automatic dilution device that allows for simple setting of dilution ratios and accurate supply of dilution liquid. Coolant liquid, which is essential in machining with machine tools, is often mixed by hand, leading to increased labor and variability, which can result in reduced productivity and increased processing costs. Our device automates concentration adjustment and coolant liquid generation without human intervention, significantly reducing labor costs. Additionally, the concentration accuracy has improved by 55% compared to conventional methods, contributing to enhanced processing quality in turning, milling, drilling, and other operations. 【Features】 ■ Patented ■ Automatic management of coolant liquid concentration ■ Space-saving design ■ Simple setting of dilution ratios and accurate supply of dilution liquid ■ Supports dilution rate settings from 1.0% to 20.0% with an accuracy of ±0.2% ■ Supply of water only is also possible (0% setting available) ■ Tankless design by directly supplying concentrated liquid into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "MX-600C" is an automatic coolant dilution device that can manage the concentration of coolant liquid automatically. Coolant liquid, which is essential in machining with machine tools, often involves manual mixing, which can lead to inconsistencies and potential processing defects. With our device, once the concentration is set, it automatically generates a mixed solution randomly and also monitors/manages the concentrated solution automatically. By reducing management workload and minimizing inconsistencies in coolant mixing, it contributes to stable processing quality. 【Features】 ■ Patented ■ Automatic management of coolant liquid concentration ■ Space-saving design ■ Simple setting of dilution ratios and accurate supply of diluted liquid ■ Supports dilution rates from 1.0% to 20.0% with an accuracy of ±0.2% ■ Supply of water only is also possible (0% setting available) ■ Tankless design as it directly feeds concentrated liquid into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "MX-600C" is a coolant automatic dilution device that allows for simple setting of dilution ratios and accurate supply of dilution liquid. It is a tankless type that sends concentrated liquid directly into the water piping, achieving a compact design. It can be installed even in spaces where there is no room. 【Product Size】 600(W) * 600(D) * 1300(H) Additionally, it contributes to labor reduction through automatic replenishment of coolant liquid and monitoring of concentrated liquid. 【Features】 ■ Patented ■ Space-saving design ■ Simple setting of dilution ratios and accurate supply of dilution liquid ■ Supports dilution ratio settings from 1.0% to 20.0% with an accuracy of ±0.2% ■ Water-only supply is also possible (0% setting available) ■ Tankless type as it sends concentrated liquid directly into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "MX-600C" is a coolant automatic dilution device that allows for simple setting of dilution ratios and accurate supply of dilution liquid. It achieves a 55% improvement in concentration accuracy compared to conventional methods, contributing to the enhancement of coolant quality necessary for machining processes such as turning, milling, and drilling. Additionally, it supports dilution rates from 1.0% to 20.0% with an accuracy of ±0.2%. It can also supply water only, and it features a tankless design by directly sending concentrated liquid into the water piping. With a logging function to manage the usage of water and concentrated liquid, it enables automatic replenishment of coolant liquid and reduction of labor through monitoring of concentrated liquid. 【Features】 ■ Patented ■ Simple setting of dilution ratios and accurate supply of dilution liquid ■ Supports dilution rates from 1.0% to 20.0% with an accuracy of ±0.2% ■ Can supply water only (0% setting possible) ■ Tankless design by directly sending concentrated liquid into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

The "RXm" is a simple and modular NC high-pressure cleaner. Drive shafts and work holding shafts can be attached to the top, bottom, and back as needed. Examples of target workpieces include pump housings, ABS housings, valve bodies, and common rails. 【Features】 ■ Simple and modular standard machine ■ Drive shafts and work holding shafts can be attached to the top, bottom, and back as needed ■ Automation compatible ■ Nozzle module compatible *For more details, please refer to the PDF materials or feel free to contact us.

• High pressure cleaner

The "RXC" is an NC high-pressure cleaning machine that can accommodate various cleaning methods with its nozzle module. It is suitable for general cleaning of large parts such as cases. After cleaning, it can switch to air blow for targeted blowing. Target work includes cylinder blocks, cylinder heads, transmission cases, and housings. 【Features】 ■ Capable of accommodating various cleaning methods with the nozzle module ■ Suitable for general cleaning of large parts such as cases ■ After cleaning, it can switch to air blow for targeted blowing ■ Automation compatible, nozzle module compatible *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

The "RXB" is an NC high-pressure cleaning machine capable of precision cleaning of small parts and parts with short cycle times. With a 2 to 8 index system, it allows for the use of high-pressure cleaning, low-pressure cleaning, and air blowing at each station. It can also perform high-pressure rotary insertion cleaning for the interiors of holes and blind holes in the workpieces. By processing 2 to 8 pieces simultaneously, even shorter cleaning cycle times are achievable. Examples of target workpieces include injector-related parts and other precision small components. 【Features】 - Capable of precision cleaning of small parts and parts with short cycle times - 2 to 8 index system - High-pressure rotary cleaning for the interiors of holes and blind holes in workpieces - Simultaneous processing of 2 to 8 pieces is also possible *For more details, please refer to the PDF materials or feel free to contact us.

• High pressure cleaner

The coolant automatic dilution device "MX-600C" automatically mixes industrial water and concentrated liquid to supply coolant fluid to machine tools. By eliminating the need for an external tank, it achieves space-saving. Since everything can be done automatically without relying on manual labor, the accuracy of the dilution ratio is improved, unnecessary oil usage is reduced, and the hassle and cost of concentration management are also eliminated. 【Features】 ■ Concentration settings can be made via a touch panel ■ Different concentrations can be set for different systems and automatically supplied (separate system/optional) ■ Compatible with emulsion-based (standard) and solution-based (optional) coolant concentrates ■ Daily usage of concentrated liquid and discharge volume can be managed in a CSV file ■ Can be connected to multiple processing machines (pressure management eliminates the need for interlocks) ■ Space-saving due to the elimination of external tanks; device size 600W × 600D × 1,305H 《Optional Features》 【Feedback Function】 ■ Concentration management of each coolant tank is possible through network construction (Automatically supplies coolant liquid with dilution ratios tailored to each coolant tank) CEM Corporation *Please feel free to contact us.

• Mixer/agitator

The "MX-600C" is a coolant automatic dilution device mixing unit that allows for simple setting of dilution ratios and accurate supply of dilution liquid. It supports dilution rates from 1.0% to 20.0% with an accuracy of ±0.2%. It can also supply water only, and since it sends the concentrated solution directly into the water piping, it is tankless. Additionally, it features a logging function to manage the usage of water and concentrated solution, enabling automatic replenishment of coolant liquid and reduction of labor through monitoring of the concentrated solution. 【Features】 ■ Patented ■ Simple setting of dilution ratios and accurate supply of dilution liquid ■ Supports dilution rates from 1.0% to 20.0% with an accuracy of ±0.2% ■ Water-only supply is possible (0% setting available) ■ Tankless design as it sends the concentrated solution directly into the water piping CEM Corporation *For more details, please refer to the related links or feel free to contact us.

• Mixer/agitator

We would like to introduce our vacuum drying system, 'ASTRO DRY.' This system evaporates water in a vacuum environment, allowing for complete drying of complex shapes. It is an energy-saving drying method that does not require air. The drying process is clean, without scattering the removed water. As for drying examples, the vacuum drying of a valve body for automotive transmission parts was completed in 40 seconds, and an oil pump was dried in 30 seconds. 【Features】 ■ Evaporation of water in a vacuum environment ■ No air blow-off ■ Energy-saving drying without the need for air ■ Complete drying even in the depths of invisible holes ■ Clean drying without scattering the removed water *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "RXA" is an NC high-pressure washer that allows nozzle access to any part of the workpiece, regardless of its shape, through 5-axis NC control. Additionally, by selecting a nozzle unit, it enables high-precision targeted cleaning, extensive overall cleaning, and high-pressure rotary cleaning for the interiors of holes and blind holes in the workpiece. 【Features】 ■ Nozzle access to any part of the workpiece, regardless of its shape, enabled by 5-axis NC control ■ High-precision targeted cleaning and extensive overall cleaning possible by selecting a nozzle unit ■ High-pressure rotary cleaning possible for the interiors of holes and blind holes in the workpiece *For more details, please download the PDF or feel free to contact us.

• High pressure cleaner