KONDO KOGYO CO.,LTD List of Products and Services

This product is an "ozone decomposition catalyst tower" that has minimal catalyst degradation and a long catalyst life, resulting in less frequent replacement and maintenance work compared to adsorption methods. It uses a small amount of catalyst, has low pressure loss, and allows for miniaturization of equipment such as blowers. Additionally, there is no risk of ash formation or explosion due to ozone, and it can be used across a wide range of ozone concentrations and temperatures. 【Features】 ■ High safety and high performance ■ Long life and compact design ■ Usable across a wide range of ozone concentrations and temperatures *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment

Kondo Industries' "Heat Storage Combustion Type Exhaust Gas Treatment Device" is an energy-saving device that achieves a high VOC treatment efficiency of over 98% and a high thermal recovery rate of 95% by using ceramic blocks with excellent thermal efficiency. We offer a wide range of treatment capacities for the "Heat Storage Combustion Type Exhaust Gas Treatment Device," from low to high air volumes. Depending on the air volume and installation space, we can propose either tower-type or rotary-type models. If you are considering updating existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Suitable for energy-saving measures such as steam recovery by utilizing excess hot air - Minimal pressure fluctuations, so it does not affect the production process - Low power consumption and low running costs

• Gas recovery/treatment equipment

WINKEL bearings can handle radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of supporting high loads and excel in impact resistance and wear resistance, providing customer satisfaction in high-load environments. Advantages of the WINKEL bearing system: - Reduction of design and production costs - Support for high radial and axial loads - Strong profile for high static and dynamic loads - Ability to distribute forces within the profile - Long-lasting bearings and profiles - Easy replacement of bearing components *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

WINKEL bearings can handle both radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of withstanding high loads, have excellent impact resistance and wear resistance, and our customers are satisfied with their use in high-load environments. Bolt-fixed bearings are typically installed by welding the bearing to a flange plate, but they can be installed without welding. Advantages of the WINKEL bearing system: - Reduction of design and production costs - Support for high radial and axial loads - Strong profile for high static and dynamic loads - Ability to distribute forces within the profile - Long-lasting bearings and profiles - Easy replacement of bearing components *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "PRO STAR" is an industrial large-scale roasting machine that can extract the flavors of barley, coffee, and grains. With inverter control, it allows for flexible adjustment of roasting time, enabling the creation of original products. Additionally, it recycles clean heat, achieving significant energy savings. 【Features】 ■ Extensive experience and track record ■ Integrated structure of roaster and dedicated deodorizing device ■ Recycling of clean heat, achieving significant energy savings ■ Compatible with grain roasters, including barley *For more details, please refer to the PDF document or feel free to contact us.

• Food Processing Equipment

The "PRO STAR" is a roasting machine that can extract a unique flavor through a stepless control aroma damper. With inverter control, it is possible to freely adjust the roasting time, allowing for the creation of original products. Additionally, the introduction of a computer-controlled auto-roast system enables the stabilization of the same variety. 【Features】 ■ Extensive experience and track record ■ Integrated structure combining roaster and dedicated deodorization unit ■ Recycling clean heat to achieve significant energy savings ■ Compatible with grain roasters for barley and other grains *For more details, please refer to the PDF document or feel free to contact us.

• Food Processing Equipment

Kondo Industries' "Heat Storage Combustion Exhaust Gas Treatment System" reduces environmental impact by achieving self-combustion and high treatment efficiency through the utilization of waste heat. Compared to the general "catalytic oxidation method," it demonstrates a high treatment efficiency of 95% heat recovery rate and over 98%, contributing to CO2 reduction. Our company offers a wide range of "Heat Storage Combustion Exhaust Gas Treatment Systems" with processing capacities from low to high air volumes. Depending on the air volume and installation space, we can propose either tower-type or rotary-type systems. If you are considering upgrading existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short construction period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Ideal for energy-saving measures such as steam recovery by utilizing surplus hot air - Minimal pressure fluctuations, ensuring no impact on the production process - Low power consumption and low running costs *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Gas recovery/treatment equipment

Kondo Industries' "Heat Storage Combustion Type Exhaust Gas Treatment Device" is an energy-saving device that achieves over 98% high VOC treatment efficiency and utilizes ceramic blocks with excellent thermal efficiency to realize a high thermal recovery rate of 95%. We offer a wide range of treatment capacities for the "Heat Storage Combustion Type Exhaust Gas Treatment Device," from low to high air volumes. Depending on the air volume and installation space, we can propose either a tower type or a rotary type. If you are considering updating existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> ■ Can be installed in a short construction period due to its unit structure ■ Space-saving design allows for indoor installation ■ Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> ■ Suitable for energy-saving measures such as steam recovery by utilizing surplus heat ■ Minimal pressure fluctuations, so it does not affect the production process ■ Low power consumption and low running costs

• Gas recovery/treatment equipment

We offer a wide range of processing capacities for our "Thermal Storage Combustion Exhaust Gas Treatment System," from low to high airflow. By adopting a self-combustion system with zero fuel, we achieve a heat recovery rate of 95% and a high processing efficiency of over 98%. This contributes to reducing CO2 emissions and energy consumption in factories. Depending on the airflow and installation space, we can propose either tower-type or rotary-type systems. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Ideal for energy-saving measures such as steam recovery by utilizing surplus hot air - Minimal pressure fluctuations, ensuring no impact on production processes - Low power consumption and low running costs *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Gas recovery/treatment equipment

The "FUME CLEANER Series" is a catalytic oxidation deodorization device that can operate without auxiliary fuel in low concentration exhaust gas at a toluene LEL of 1/15 (800 ppm). Exhaust gas containing organic silicone, phosphorus, heavy metals, and other substances that cause catalyst poisoning significantly improves the lifespan of the catalyst through the use of pre-treatment agents. Exhaust gas containing tar and other substances is prevented from adhering to blowers, filters, heat exchangers, etc., by this system, greatly reducing maintenance burdens. 【System Lineup】 ■ Self-combustion system ■ System for gas containing catalyst poisons ■ Thermo-cleaning system ■ Nitrogen compound emission suppression system ■ Waste heat recovery system *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

The "Concentrated Exhaust Gas Treatment Device" is suitable for treating low-concentration, high-volume foul odors and VOC exhaust gases. The adsorption rotor made of activated carbon or zeolite is divided into completely sealed zones for adsorption, regeneration, and cooling, allowing the exhaust gas to pass through the adsorption section where foul odors and VOCs are adsorbed, resulting in clean air. By combining the concentration device with combustion-type exhaust gas treatment devices (catalytic, direct combustion, heat storage), a wide range of exhaust gases can be treated. 【Features】 ■ Suitable for treating low-concentration, high-volume foul odors and VOCs (volatile organic compounds) in exhaust gases ■ Exhaust gas passes through the adsorption section where foul odors and VOCs are adsorbed, resulting in clean air ■ Foul odors and VOCs adsorbed on the rotor are desorbed in the regeneration zone using low-volume hot air of about 1/5 to 1/20 ■ The rotor heated by hot air is cooled in the cooling zone before moving to the adsorption zone ■ The low-volume exhaust gas containing high concentrations of foul odors and VOCs after desorption is treated by a combustion deodorization device *For more details, please refer to the PDF document or feel free to contact us.

• Gas recovery/treatment equipment

This catalog provides a digest introduction to WINKEL bearings handled by Kondo Industries. WINKEL bearings can accommodate both radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of handling high loads and excel in impact resistance and wear resistance, satisfying customers in high-load environments. We offer a variety of bearings, including types that allow for axial adjustment, heat-resistant types, and quiet types. We implement additional welding, processing, and painting according to customer drawings, delivering them in a ready-to-install state, so please feel free to contact us at any time. [Contents (excerpt)] - List of bearing products - Features of each product - WINKEL axial fixed bearings - WINKEL heat-resistant bearings - WINKEL bearings with axial adjustment function (eccentric type) - Examples of applications *For more details, please refer to the PDF materials or feel free to contact us. *The downloadable comprehensive catalog PDF is a digest version. If you would like the complete version, please contact us.

• Metal bearings

WINKEL bearings can handle both radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of supporting high loads and excel in impact resistance and wear resistance, providing customer satisfaction in high-load environments. Axial Fixed Bearings This is the most basic type of axial fixed bearing. It is installed by welding to a dedicated flange plate, and the use of a specialized rail called a profile is recommended. The gap adjustment between the profile and the bearing can be made using washers. Advantages of the WINKEL Bearing System - Reduction of design and production costs - Support for high radial and axial loads - Strong profiles for high static and dynamic loads - Ability to distribute forces within the profile - Long-lasting bearings and profiles - Economical assembly with welded bolts - Easy replacement of bearing components *For more details, please refer to the PDF materials or feel free to contact us.

• Metal bearings

The "bearing with axial adjustment function" is a product that can be adjusted by inserting washers between the bearing body and the housing of the guide roller. Washers with thicknesses of 0.5 and 1.0 mm are available. 【Features】 ■ Adjustable ■ Washers with thicknesses of 0.5 and 1.0 mm are available ■ Custom bolt compatibility available *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

WINKEL bearings can handle both radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of supporting high loads and excel in impact resistance and wear resistance, satisfying customers in high-load environments. Advantages of the WINKEL bearing system: - Reduction of design and production costs - Support for high radial and axial loads - Strong profile for high static and dynamic loads - Ability to distribute forces within the profile - Long-lasting bearings and profiles - Economical assembly with welded bolts - Easy replacement of bearing components *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "Combined Bearing" is a bearing system that reduces design and manufacturing costs. WINKEL bearings accommodate both radial and axial loads in one bearing. They are easy to install and allow for cost reduction in design and manufacturing. Additionally, they are capable of handling high loads and excel in impact resistance and wear resistance, satisfying customers in high-load environments. 【Features】 ■ Reduces design and manufacturing costs ■ Accommodates high radial loads and axial loads ■ Economical assembly ■ Components of the bearing can be easily replaced *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

Features of "VULKOLLAN Bearings": ■ Bearings covered with VULKOLLAN provide low noise operation ■ High-speed applications up to 6.0 m/s ■ 2RS type offers low friction due to high-precision ball bearings ■ Anti-screw running ■ High load capacity *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

Features of the "Profile": ■ High-quality rails processed with sandblasting. ■ Resistant to large static and dynamic loads. ■ Provides optimal load distribution. ■ Extremely long lifespan. *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The features of the "Clamp Flange" are as follows: ■ It can be installed with adjustable profiles. ■ Easy assembly; it can be installed immediately without welding. ■ Reliable positioning and easy profile replacement. ■ Parallel positioning is easy. *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "Combined Bearing" is a bearing system that reduces design and manufacturing costs. It can accommodate high radial loads as well as axial loads, and its profile withstands large static and dynamic loads. In addition to being economically assembled through bolt welding of the bearings, the components of the bearing can also be easily replaced. 【Features】 ■ Reduces design and manufacturing costs ■ Accommodates high radial loads and axial loads ■ Economically assembled ■ Components of the bearing can be easily replaced *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

Bearings are typically designed to support loads in one direction only. For example, if vertical and horizontal loads need to be supported, two bearings would be required. A combined bearing can handle that with just one.

• Metal bearings

Our company is engaged in the manufacturing and processing of various automotive parts, as well as the design, production, and sales of various machine tools. With a total system for planning, design, production, installation, and maintenance, we respond meticulously to all customer needs, from specialized machines and automation, labor-saving, rationalization, and high-quality equipment to the realization of advanced factory automation in production sites using large-scale production facilities and industrial robots. 【Business Activities】 ■ Manufacturing and processing of various automotive parts ■ Design, production, and sales of various machine tools ■ Design, manufacturing, and sales of housing-related equipment ■ Design and construction of multi-story parking lots and other construction projects ■ Design, production, and sales of deodorization equipment, hot air dryers for off-line use, coffee roasters, coffee plants, and other machinery and equipment related to the environment *For more details, please refer to the PDF materials or feel free to contact us.

• Metal bearings