KONDO KOGYO CO.,LTD List of Products and Services

This catalog provides a digest introduction to WINKEL bearings handled by Kondo Industries. WINKEL bearings can accommodate both radial and axial loads in both directions with a single bearing. They are easy to install and can reduce design and manufacturing costs. Additionally, they are capable of handling high loads and excel in impact resistance and wear resistance, satisfying customers in high-load environments. We offer a variety of bearings, including types that allow for axial adjustment, heat-resistant types, and quiet types. We implement additional welding, processing, and painting according to customer drawings, delivering them in a ready-to-install state, so please feel free to contact us at any time. [Contents (excerpt)] - List of bearing products - Features of each product - WINKEL axial fixed bearings - WINKEL heat-resistant bearings - WINKEL bearings with axial adjustment function (eccentric type) - Examples of applications *For more details, please refer to the PDF materials or feel free to contact us. *The downloadable comprehensive catalog PDF is a digest version. If you would like the complete version, please contact us.

The "Concentrated Exhaust Gas Treatment Device" is suitable for treating low-concentration, high-volume foul odors and VOC exhaust gases. The adsorption rotor made of activated carbon or zeolite is divided into completely sealed zones for adsorption, regeneration, and cooling, allowing the exhaust gas to pass through the adsorption section where foul odors and VOCs are adsorbed, resulting in clean air. By combining the concentration device with combustion-type exhaust gas treatment devices (catalytic, direct combustion, heat storage), a wide range of exhaust gases can be treated. 【Features】 ■ Suitable for treating low-concentration, high-volume foul odors and VOCs (volatile organic compounds) in exhaust gases ■ Exhaust gas passes through the adsorption section where foul odors and VOCs are adsorbed, resulting in clean air ■ Foul odors and VOCs adsorbed on the rotor are desorbed in the regeneration zone using low-volume hot air of about 1/5 to 1/20 ■ The rotor heated by hot air is cooled in the cooling zone before moving to the adsorption zone ■ The low-volume exhaust gas containing high concentrations of foul odors and VOCs after desorption is treated by a combustion deodorization device *For more details, please refer to the PDF document or feel free to contact us.

The "FUME CLEANER Series" is a catalytic oxidation deodorization device that can operate without auxiliary fuel in low concentration exhaust gas at a toluene LEL of 1/15 (800 ppm). Exhaust gas containing organic silicone, phosphorus, heavy metals, and other substances that cause catalyst poisoning significantly improves the lifespan of the catalyst through the use of pre-treatment agents. Exhaust gas containing tar and other substances is prevented from adhering to blowers, filters, heat exchangers, etc., by this system, greatly reducing maintenance burdens. 【System Lineup】 ■ Self-combustion system ■ System for gas containing catalyst poisons ■ Thermo-cleaning system ■ Nitrogen compound emission suppression system ■ Waste heat recovery system *For more details, please refer to the PDF document or feel free to contact us.

We offer a wide range of processing capacities for our "Thermal Storage Combustion Exhaust Gas Treatment System," from low to high airflow. By adopting a self-combustion system with zero fuel, we achieve a heat recovery rate of 95% and a high processing efficiency of over 98%. This contributes to reducing CO2 emissions and energy consumption in factories. Depending on the airflow and installation space, we can propose either tower-type or rotary-type systems. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Ideal for energy-saving measures such as steam recovery by utilizing surplus hot air - Minimal pressure fluctuations, ensuring no impact on production processes - Low power consumption and low running costs *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Kondo Industries' "Heat Storage Combustion Type Exhaust Gas Treatment Device" is an energy-saving device that achieves over 98% high VOC treatment efficiency and utilizes ceramic blocks with excellent thermal efficiency to realize a high thermal recovery rate of 95%. We offer a wide range of treatment capacities for the "Heat Storage Combustion Type Exhaust Gas Treatment Device," from low to high air volumes. Depending on the air volume and installation space, we can propose either a tower type or a rotary type. If you are considering updating existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> ■ Can be installed in a short construction period due to its unit structure ■ Space-saving design allows for indoor installation ■ Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> ■ Suitable for energy-saving measures such as steam recovery by utilizing surplus heat ■ Minimal pressure fluctuations, so it does not affect the production process ■ Low power consumption and low running costs

Kondo Industries' "Heat Storage Combustion Exhaust Gas Treatment System" reduces environmental impact by achieving self-combustion and high treatment efficiency through the utilization of waste heat. Compared to the general "catalytic oxidation method," it demonstrates a high treatment efficiency of 95% heat recovery rate and over 98%, contributing to CO2 reduction. Our company offers a wide range of "Heat Storage Combustion Exhaust Gas Treatment Systems" with processing capacities from low to high air volumes. Depending on the air volume and installation space, we can propose either tower-type or rotary-type systems. If you are considering upgrading existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short construction period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Ideal for energy-saving measures such as steam recovery by utilizing surplus hot air - Minimal pressure fluctuations, ensuring no impact on the production process - Low power consumption and low running costs *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The "PRO STAR" is a roasting machine that can extract a unique flavor through a stepless control aroma damper. With inverter control, it is possible to freely adjust the roasting time, allowing for the creation of original products. Additionally, the introduction of a computer-controlled auto-roast system enables the stabilization of the same variety. 【Features】 ■ Extensive experience and track record ■ Integrated structure combining roaster and dedicated deodorization unit ■ Recycling clean heat to achieve significant energy savings ■ Compatible with grain roasters for barley and other grains *For more details, please refer to the PDF document or feel free to contact us.

The "PRO STAR" is an industrial large-scale roasting machine that can extract the flavors of barley, coffee, and grains. With inverter control, it allows for flexible adjustment of roasting time, enabling the creation of original products. Additionally, it recycles clean heat, achieving significant energy savings. 【Features】 ■ Extensive experience and track record ■ Integrated structure of roaster and dedicated deodorizing device ■ Recycling of clean heat, achieving significant energy savings ■ Compatible with grain roasters, including barley *For more details, please refer to the PDF document or feel free to contact us.

Kondo Industries' "Heat Storage Combustion Type Exhaust Gas Treatment Device" is an energy-saving device that achieves a high VOC treatment efficiency of over 98% and a high thermal recovery rate of 95% by using ceramic blocks with excellent thermal efficiency. We offer a wide range of treatment capacities for the "Heat Storage Combustion Type Exhaust Gas Treatment Device," from low to high air volumes. Depending on the air volume and installation space, we can propose either tower-type or rotary-type models. If you are considering updating existing combustion equipment or introducing new facilities, please feel free to download our materials or contact us through our website. 【Features】 <KTR Series (Tower Type)> - Can be installed in a short period due to its unit structure - Space-saving design allows for indoor installation - Integrated design helps reduce maintenance costs <KRR Series (Rotary Type)> - Suitable for energy-saving measures such as steam recovery by utilizing excess hot air - Minimal pressure fluctuations, so it does not affect the production process - Low power consumption and low running costs

This product is an "ozone decomposition catalyst tower" that has minimal catalyst degradation and a long catalyst life, resulting in less frequent replacement and maintenance work compared to adsorption methods. It uses a small amount of catalyst, has low pressure loss, and allows for miniaturization of equipment such as blowers. Additionally, there is no risk of ash formation or explosion due to ozone, and it can be used across a wide range of ozone concentrations and temperatures. 【Features】 ■ High safety and high performance ■ Long life and compact design ■ Usable across a wide range of ozone concentrations and temperatures *For more details, please refer to the PDF materials or feel free to contact us.