丸文通商 List of Products and Services

The "R&S FPC" is a spectrum analyzer suitable for use in university laboratories, research institutions, and manufacturing/services. It ensures investment protection through software frequency upgrade capabilities. It features top-class RF performance designed in Germany. Additionally, it serves as a vector network analyzer, capable of performing one-port vector network analysis using the built-in VSWR bridge and displaying Smith charts. 【Features】 ■ RF performance designed in Germany ■ 10.1-inch WXGA (1366×768 pixels) display ■ Frequency range of 5 kHz to 1 GHz, upgradeable to 2 GHz/3 GHz via keycode ■ Bandwidth settings with resolution down to 1 Hz ■ Tracking generator and independent CW signal generator *For more details, please download the PDF or feel free to contact us.

• Time-frequency measurements
• oscilloscope
• EMC/Static electricity measuring equipment

The "R&S RTM3000" is an oscilloscope designed as a tool for everyday problem-solving. When all channels are activated, it can utilize a memory capacity of 40 million samples per channel. Additionally, it can use the Rohde & Schwarz probe interface with almost all Rohde & Schwarz probing solutions, allowing for proper connections to various DUTs. 【Features】 ■ Maintains high resolution even with simultaneous display of large and small signals ■ Achieves long-duration capture even with measurements across the entire bandwidth ■ 10.1-inch high-resolution capacitive touchscreen that supports pinch in/out ■ An oscilloscope that incorporates multiple functions in one unit ■ Frequency response analysis (Bode plot) *For more details, please download the PDF or feel free to contact us.

• oscilloscope
• Circuit board design and manufacturing
• High frequency/microwave parts

The "R&S SCOPE RIDER" is an oscilloscope that combines the convenience and durability of a battery-operated handheld device. It can analyze even small sensor signals with excellent vertical sensitivity of 2mV/div, and it is capable of not only triggering on protocols but also decoding protocol data. Additionally, it provides the best level of trigger sensitivity available in handheld oscilloscopes, allowing for accurate signal capture with 14 different flexible trigger types. 【Features】 ■ 60MHz to 500MHz, up to 5G samples/second ■ High-speed waveform capture system with history mode ■ 10-bit A/D converter ■ Excellent sensitivity: 2mV/div to 100V/div ■ Offset correction range of up to 200V *For more details, please download the PDF or feel free to contact us.

• oscilloscope
• Other electric meters
• Circuit board design and manufacturing

The "R&S RTA4000" is an oscilloscope designed with ultra-large capacity memory. It integrates a 10-bit ADC with low noise performance, memory capacity, and time base accuracy, achieving sharp waveforms, more accurate measurements, and reliability even when faced with unexpected measurement challenges. Additionally, it includes a logic analyzer, protocol analyzer, spectrum analyzer, waveform generator, pattern generator, and digital voltmeter. 【Features】 ■ Excellent signal integrity ■ Long-duration capture even with measurements across the entire bandwidth ■ Compact design with a large high-resolution display ■ Frequency response analysis (Bode plot) ■ Spectrum analysis: identification of interactions between time and frequency *For more details, please download the PDF or feel free to contact us.

• oscilloscope
• Time-frequency measurements
• Circuit board design and manufacturing

Rohde & Schwarz is working tirelessly towards realizing a more secure connected society through its divisions of electronic measurement, technology systems, networks, and cybersecurity. As a globally technology-oriented group, it has been pushing the boundaries of technology for 90 years by continuing to develop cutting-edge technologies. Our latest products and solutions assist customers in the industrial sector, regulatory authorities, and government agencies in gaining sovereignty over digital technologies. Rohde & Schwarz is a privately owned independent company based in Munich, Germany, and is building a framework for long-term and sustainable management.

• Resistors
• High frequency/microwave parts
• oscilloscope

In addition to tap water, turbidity is used as an indicator to reduce the environmental impact of wastewater related to regulations in facilities and plants. Furthermore, in the food and beverage industry, it is measured in product development, manufacturing, and quality testing as one of the factors that characterize drinking water, known as "drinkability," alongside quality, aesthetics, and health.

• Turbidity Meter
• Turbidity meter/color meter
• Wastewater/wastewater treatment equipment

Don't you feel a bit of hassle when analyzing Mizuno samples? ⇒ This is a spectrophotometer that balances accurate measurements with simple operability.

• Water quality testing
• Water quality testing
• Wastewater/wastewater treatment equipment

Ultra-fast response detector. For more details, please contact us.

• Water quality testing
• Environmental Analysis
• Mass Spectrometer

Analysis of PFAS in drinking water in accordance with EPA 533 using triple quadrupole LC/MS/MS.

• Water quality testing
• Other water quality analysis
• Other semiconductors

Analysis of organic fluorine compounds (PFAS) in drinking water in accordance with EPAMethod537.1.

• Water quality testing
• Other water quality analysis
• Other semiconductors

LCMSMS

• Water quality testing
• CMP Equipment

1. Includes optimized LC/MS/MS analysis method files with "Ready to Use" analysis methods. Once you have the equipment, reagents, and columns ready, you can start the analysis immediately. There is no need for tedious consideration of analysis conditions. 2. Illustrated example of analysis procedures. We provide illustrated examples of analysis procedures in accordance with the EPA method. This helps in understanding the complex EPA method. Additionally, we clearly indicate the corresponding sections in the original EPA method for each step, making it easy to refer to the original text as needed. 3. Points to note and tips for analysis. We provide clear tips and points to note for conducting the analysis smoothly, following the analysis procedures.

• Water quality testing
• Analytical Equipment and Devices

We would like to introduce our tabletop water quality meter, the 'X Series'. Equipped with a large touch panel, it features a big and easy-to-read display, and the flat panel makes maintenance simple. It can be placed vertically or horizontally, and it can also be wall-mounted. PC communication via Bluetooth is available (manufacturer option), offering excellent system expandability. Additionally, we have user-friendly electrodes/stands and a turntable "TTT-710" that supports continuous automatic measurement of multiple samples. 【Features】 ■ Large touch panel ■ Excellent system expandability ■ Comprehensive screen display *For more details, please download the PDF or feel free to contact us.

• Water quality testing
• Other water quality analysis
• pH meter

The "WQC-30" is a high-performance integrated sensor that can simultaneously measure up to six parameters, making it a simple portable multiparameter water quality meter. ■pH ■EC ■Turb. ■Temp. ■NaCL ■DO The repeatability at low measurement ranges is ±1%, which improves reliability compared to our conventional products. With a memory function that can store 200 data points, automatic memory at regular intervals is also possible, making it effective for simple monitoring. Additionally, it can measure continuously for about 70 hours using two AA alkaline batteries, achieving approximately 90% power reduction compared to our conventional products. 【Features】 ■Improved reliability in low concentration turbidity range ■Memory function with 200 data points ■Power-saving design ■Excellent expandability (can be connected to a computer, external printer, etc.) *For more details, please download the PDF or feel free to contact us.

• Other water quality analysis
• Water quality testing
• Simple water quality test

The WDM-135A model (2-wire type) / 136A model (4-wire type) is a compact and robust aluminum-cased, easy-to-operate industrial conductivity meter converter (transmitter) for field installation. It is available in a 2-wire type (DC 24V power supply) and a 4-wire type (AC free power supply), transmitting an output of DC 4-20mA. It can handle a wide range from ultra-pure water (0-0.2 μS/cm) to factory wastewater (0-20 mS/cm), and has a broad temperature compensation range from -5 to 120°C. Additionally, it is equipped with a burnout function that alerts to abnormalities by driving the transmission output to the upper or lower limit in the event of a failure in the measurement system, such as abnormal temperature compensation resistance or memory element failure. 【Features】 ■ Wide measurement range ■ Adjustable measurement range ■ Temperature measurement display ■ Measurement value adjustment ■ Self-diagnosis ■ Automatic return to measurement mode *For more details, please download the PDF or feel free to contact us.

• Conductivity Meter
• Conductivity Meter
• Wastewater/wastewater treatment equipment

The "TU5200" is a tabletop turbidity meter that adopts a new 90° scattering method and supports PSL turbidity with a custom calibration feature. It uses the ratio turbidity method to collect 90° scattered light around the vial in a full 360°. This is a groundbreaking 360° x 90° detection technology. Additionally, it allows for up to 6-point calibration, including zero calibration, using any concentration or standard substance. It also includes security-related features. 【Features】 ■ Measures low turbidity areas with high sensitivity and precision ■ Custom calibration feature ■ Supports PSL turbidity measurement ■ Signal averaging ■ External output *For more details, please download the PDF or feel free to contact us.

• Turbidity Meter
• Turbidity meter/color meter

The "TL2300/2350" is a tabletop turbidity meter that incorporates calibration compliant with the Japanese Pharmacopoeia, pursuing operability and high precision. It irradiates the sample with light from a tungsten lamp, and the "TL2300" can measure up to 4000 NTU using a 90° scattered light detector, a transmitted light detector, and a forward scattered light detector. Furthermore, the "TL2350" adds a backward scattered light detector, allowing measurements of up to 10000 NTU. 【Features】 ■ Full-color touch screen ■ Self-diagnosis function ■ Calibration selection ■ User program function (only for TL2350) *For more details, please download the PDF or feel free to contact us.

• Turbidity Meter
• Turbidity meter/color meter

The "IA-300" is an ion analyzer that utilizes ion chromatography, capable of measuring 6 cation items or 7 anion items. It supports both suppressor and non-suppressor methods for anion measurement. The analysis and calculations of measurement data are performed automatically by the device itself. Compared to ion chromatographs that process data using a computer, it significantly reduces processing time and allows for conversion to hardness and nitrogen content. 【Features】 ■ Automatic processing of analysis and calculations ■ Labor-saving through automatic measurement of multiple samples ■ Easy maintenance ■ Suppressor method also adopted for anion measurement ■ Various reagents available (sold separately) *For more details, please download the PDF or feel free to contact us.

• Ion Chromatography
• Ion Measurement

The "HDM-137A type (2-wire) / 138A type (4-wire)" is a field-mounted ORP meter converter (transmitter) with a simple function and easy operation, housed in a compact and robust aluminum case. In the measurement range of -2000 to 2000 mV, the transmission output of DC 4 to 20 mA can be set arbitrarily with a width of 400 mV or more. With the ORP standard solution check, the quality of the electrode characteristics is automatically judged. It indicates "GOOD," "LOW," or "HIGH" relative to the reference potential, along with displaying the potential difference. 【Features】 ■ Change of ORP transmission output range ■ Automatic judgment of electrode characteristics ■ Temperature measurement display ■ ORP measurement value shift ■ Easy operation with a waterproof switch on the bottom *For more details, please download the PDF or feel free to contact us.

• Water quality testing
• Water quality improvement
• Other water quality analysis

The "HDM-135A type (2-wire) / 136A type (4-wire)" is a compact and robust aluminum-cased pH meter converter (transmitter) designed for easy operation and simple functionality in field installations. It is available in a 2-wire (DC 24V power supply) and a 4-wire (AC-free power supply) version, transmitting an output of DC 4-20mA. For two-point calibration using various pH standard solutions, pressing the calibration switch once initiates the stability determination for the first point, and once stable, it automatically completes the calibration and transitions to the second point. This stability determination feature allows for accurate two-point calibration without individual discrepancies. 【Features】 ■ Changeable pH transmission output range ■ One-touch automatic calibration ■ Automatic determination of pH electrode quality ■ pH measurement value shift ■ Glass electrode crack detection *For more details, please download the PDF or feel free to contact us.

• pH meter
• pH meter
• pH Meter

The "HC-G65 model" is a micro-flow pH detector suitable for pH measurement of low electrical conductivity water (0.01 mS/m or higher) such as pure water and boiler water. The combination pH electrode is the GSS-314P type, which features a chip exchange system (glass electrode and reference electrode liquid junction). By immersing the liquid junction of the reference electrode in the KCl reservoir of the measurement cell and flowing the sample water at a constant rate (30-200 mL/min), more accurate and stable measurements can be achieved. 【Features】 ■ The combination pH electrode is the chip exchange type GSS-314P. ■ By flowing the sample water at a constant rate (30-200 mL/min), more accurate and stable measurements are obtained. ■ Effective even for boiler water affected by cleaning agents (reducing agents). ■ Comes with a beaker stand (for standard solution calibration). *For more details, please download the PDF or feel free to contact us.

• pH meter
• pH meter
• pH Meter

The "HBM-160B/162B" is a robust, aluminum die-cast, 4-wire (AC free power supply) field-mounted pH/ORP meter converter. It is equipped with DC 4-20mA transmission output for pH/ORP values and water temperature, as well as a 2-point adjustment (upper and lower limit alarm contact) output. All operations, including calibration, can be performed using the 10 waterproof sheet keys on the front without opening the door. Additionally, the standard liquid calibration (check) features one-touch automatic stability determination, allowing for stable calibration without individual differences. 【Features】 ■ All operations, including calibration, can be performed using the 10 waterproof sheet keys on the front without opening the door. ■ The standard liquid calibration (check) includes one-touch automatic stability determination, enabling stable calibration without individual differences. ■ Automatically determines the quality of electrode characteristics and displays a message. *For more details, please download the PDF or feel free to contact us.

• pH meter
• pH meter
• pH Meter

The "HBM-100B/102B" is a panel-mounted pH/ORP controller that conforms to the compact DIN standard of 96×96mm. The standard liquid calibration (check) features one-touch automatic stability determination, allowing for stable calibration without individual differences. Additionally, it automatically determines the quality of the electrode characteristics and displays a message. The alarm (control) output operates with upper and lower limit ON-OFF actions, along with adjustable sensitivity settings. 【Features】 ■ The standard liquid calibration (check) includes one-touch automatic stability determination, enabling stable calibration without individual differences. ■ Automatically determines the quality of the electrode characteristics and displays a message. ■ The alarm (control) output operates with upper and lower limit ON-OFF actions, along with adjustable sensitivity settings. ■ The display unit is equipped with a backlight. ■ Obtained EC directive (CE marking). *For more details, please download the PDF or feel free to contact us.

• pH meter
• pH meter
• pH Meter

The "BOD Trak II" is a pressure sensor-based automatic BOD measuring device that detects pressure changes with a highly sensitive pressure sensor and converts them into oxygen consumption values. By monitoring the pressure, it allows for continuous direct reading. During measurement, the sample is constantly stirred, ensuring uniform oxygen uptake in the sample water. The generated carbon dioxide is absorbed by an absorbent (potassium hydroxide) set within the container, so it does not affect pressure measurement. Measurement data can be accessed at any time, and transferring it to a PC or other devices is also easy. 【Features】 ■ Direct reading of BOD measurement values up to 700 mg/L ■ Simple operation for measurement preparation by just placing the sample and nutrient buffer solution in the sample bottle ■ Due to the pressure sensor method, there is no influence from suspended solids or coloration in the sample, allowing for stable measurements ■ Can automatically measure up to 6 samples with one unit *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other measurement and measuring equipment
• Water quality testing

The "AQM-250 model/AR6-212 model" is a compact (DIN96 size) and lightweight, panel-mounted ultra-pure water two-channel low resistivity meter. It performs temperature compensation for ultra-pure water with low resistivity of 18.24 MΩ·cm in the range of 10 to 35°C, allowing for high-precision measurements. The detector "AR6-212 model" is calibrated with actual liquid, making it usable as a secondary standard for calibrating general low resistivity meters. 【Features】 ■ Can connect two detectors (2 channels) and display measurement values alternately ■ Transmission output DC4-20mA is available in two circuits, with OUT1 fixed to the low resistivity of detector A ■ OUT2 can select either the low resistivity of detector B or the temperature of detector A ■ Alarm output is available in two circuits with c contacts, allowing for upper and lower limit settings for measurement values ■ Standard equipped with digital communication output RS-232C *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other measurement and measuring equipment
• Ultrapure water production equipment

Mounting-related equipment Equipment for producing electronic circuit boards, which are essential for electronic devices. What is mounting-related equipment? It refers to various production devices used to attach various components such as IC chips, semiconductors, and capacitors onto the substrate of an electronic circuit, completing the "electronic circuit board." Printing process Inspection process Mounting process Inspection process Reflow process Inspection process Insertion process for irregularly shaped components.

• Printed Circuit Board
• Circuit board design and manufacturing
• Substrate transport device (loader/unloader)

Environmental testing equipment, pure water production devices, instrument cleaning devices, indoor installation scrubber systems, etc., can be used in testing and laboratory rooms.

• Waterproof Connector
• Pure water production equipment
• Environmental Test Equipment

This catalog introduces the products of "Engineering Lab" handled by Marubun Trading Co., Ltd. It features the high-precision dispensing dispenser "Twin-air," which uses a minimum 25um inner diameter ultra-fine ceramic nozzle, as well as the high-precision coating drawing system "ES Series," capable of dot and line coatings below 100um. Additionally, we also introduce the tabletop high-speed coating system "A430," which is equipped with alignment processing and automatic height correction functions. Please make use of this for product selection. 【Featured Products (Excerpt)】 ■ Piezojet Dispenser "X-JET" ■ Spiral Coater ■ Tabletop Dispensing System "ED20" ■ Inline Precision Coating Device "EI-3325" ■ Paste Coater "CL" *For more details, please download the PDF or feel free to contact us.

• dispenser
• Printed Circuit Board
• spray

The "ICPE-9800 Series" is a multi-type ICP emission spectrometer equipped with precision that enables simultaneous and rapid analysis of multiple elements regardless of concentration, and software simplicity that facilitates analysis. By observing in both axial and radial directions, it achieves a wide dynamic range from ppb to percent. This allows for simultaneous analysis across a broad concentration range, improving throughput. Additionally, through a unique system (Eco mode, mini-torch system, vacuum spectrometer), it significantly reduces argon gas consumption, cutting total running costs by more than half. 【Features】 ■ Improved throughput ■ Provision of suitable methods ■ Reduction of running costs ■ Shortened analysis time ■ Excellent long-term stability *For more details, please download the PDF or feel free to contact us.

• Spectroscopic Analysis Equipment
• Metal detection and detection equipment
• Wastewater/wastewater treatment equipment

The "TOC-L" is a total organic carbon analyzer capable of outputting measurement data to a USB memory and to a general-purpose printer for PCs. It has an ultra-wide range from 4μg/L to 30,000mg/L, making it applicable from ultra-pure water to highly contaminated water (TOC-LCSH/CPH). Additionally, by using the automatic dilution function to reduce the salinity, acidity, and alkalinity of samples, the maintenance period for catalysts and combustion tubes can be significantly extended. (The effectiveness may vary depending on the sample and measurement conditions.) 【Features】 ■ Reliable sample injection system ■ Four models to choose from based on application ■ Applicable not only to water samples but also to gas and solid samples (when using manual injection kits or solid sample combustion devices) ■ Pressurized air can be used as carrier gas *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Wastewater/wastewater treatment equipment
• Water quality testing

The "PDA-7000 Series" is a luminescence analysis device that can reduce sample sampling and shorten analysis time. By managing nitrogen in cast iron, it is possible to eliminate sample defects and improve yield. Additionally, the structure and materials of conventional luminescence stands have been completely renewed, significantly enhancing the accuracy for high-concentration elements (stainless steel, aluminum alloys). 【Features】 ■ High-sensitivity analysis of nitrogen in steel ■ High-sensitivity analysis of trace elements ■ Elimination of contamination effects ■ Improved stability with the adoption of a new luminescence stand ■ Electrode cleaning (electrode lifespan approximately 10 times longer) *For more details, please download the PDF or feel free to contact us.

• Chemiluminescence analyzer

The "Autograph AGS-V Series" is a precision universal testing machine equipped with a standard shatterproof cover at the front of the test space. Made of polycarbonate with high impact resistance, it blocks broken test pieces and protects the operator. Additionally, it features an interlock function that prevents testing or return operations unless the shatterproof cover is closed, reducing the risk of accidents. 【Features】 ■ Shatterproof Cover - Blocks shattered fragments - Prevents unintended operation with interlock - Free-stop adjustable cover for vertical movement ■ Intelligent Crosshead - Prevents collisions with fixtures *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "EZ Test" is a compact-sized tabletop testing machine that fits comfortably on a desk. It employs a high-precision load cell that guarantees an accuracy of ±0.5% (high precision type) over a wide range of rated capacities from 1/500 to 1/1. Additionally, it comes standard with an adjustable controller that allows for position adjustment of the crosshead and starting the test from the operator's location. The position and angle can be adjusted to suit the operator's posture. 【Features】 ■ Lightweight and compact ■ Easy to use ■ Operated from the operator's location ■ Guaranteed measurement of test force with a maximum 5kN high-precision load cell ■ A rich lineup that meets various needs *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "AA-7800 Series" is an atomic absorption spectrophotometer that allows for upgrades through the addition of units, enabling the system to evolve according to the analysis target. It is equipped with a three-dimensional optical system, which automatically sets to optical double beam during frame measurements. Furthermore, by employing high-speed computational digital filters and optical components that minimize light loss to the extreme, it achieves stable data and high sensitivity. Additionally, the lamp house features an 8-lamp turret with an automatic switching function, allowing two hollow cathode lamps to be lit simultaneously. 【Features】 ■ High basic performance supporting diverse applications - Double beam optical system - High stability through digital temperature control and gas control ■ Automatic switching of 8 hollow cathode lamps - Lamp history function that aids in lamp management *For more details, please download the PDF or feel free to contact us.

• Atomic Absorption Spectrometer
• Optical Measuring Instruments
• Water quality testing

The "SC Series" is a spiral coater capable of dispensing medium-viscosity liquid agents without dilution. It can be applied to various uses such as painting automotive parts with metallic paint and applying moisture-proof agents to substrates. Additionally, we offer a "desktop coating device" equipped with a spiral coater. 【Features】 ■ Capable of dispensing medium-viscosity liquid agents without dilution (Max. 1,500 mPas) ■ Compatible with solvent-free and water-based liquids, contributing to VOC emission reduction ■ Capable of forming thin films at the nano level ■ Achieves a coating efficiency of over 90%, eliminating the need for a spray booth ■ Uniform coating on uneven surfaces is possible due to spiral spray technology *For more details, please download the PDF or feel free to contact us.

• Coater
• Printed Circuit Board
• Coating Machine

The "IRSpirit-X Series" is a Fourier Transform Infrared Spectrophotometer capable of analysis in narrow spaces. The design allows for the ON/OFF switch and humidity indicator to be checked from both the front and side. With the integrated ATR in the sample chamber, the height of the prism and the FTIR main unit are the same, allowing for measurements to be taken without cutting large samples. 【Features】 ■ Space-saving, high expandability ■ Easy start for anyone ■ Reliable for safe implementation ■ Automation and labor-saving *For more details, please download the PDF or feel free to contact us.

• Infrared Spectrophotometer
• plastic
• Chemicals

The "X-JET" is a piezo jet dispenser that allows for digital control of discharge parameters via a dedicated controller, enabling the creation of an appropriate portfolio for valve opening and closing based on the characteristics of the liquid and usage conditions. It reduces bubbles, splatter, and liquid dripping, and can handle everything from low-viscosity liquids to high-viscosity pastes and easily stringy adhesives with a single unit. Additionally, we also offer the tabletop high-speed coating device "A Series." 【Features】 ■ Equipped with a high-precision piezo actuator for high reproducibility ■ Modular flow paths for excellent maintenance ■ Nozzle and tappet can be freely combined to accommodate low to high viscosity ■ Tappet calibration mechanism ensures stable application amounts over long periods ■ Built-in heater provides stable discharge regardless of environmental changes ■ Capable of precise application from a distance without being affected by warping or distortion of the workpiece *For more details, please download the PDF or feel free to contact us.

• dispenser
• Printer/marker
• Printed Circuit Board

The "Brevis GC-2050" is a gas chromatograph that achieves uncompromising analytical performance while being space-saving. With a width of 350mm, it can perform analyses in an area equivalent to that of a 15-inch laptop. Compared to the "Nexis GC-2030," the system width is reduced by approximately 35%. Additionally, by removing the display of conventional devices and using the GC Remote Display installed on a PC or smart device, it is possible to check the device status and review daily maintenance procedures and videos. 【Features】 ■ Uncompromising compact design ■ Advanced user support technology ■ Top-level performance *For more details, please download the PDF or feel free to contact us.

• Gas chromatograph

The "MD-5575" is a rework dispenser used for the regeneration of SMT solder and BGA balls. The configuration includes a twin-air high-precision dispenser, manipulator, dispenser controller, digital microscope, LCD monitor, and a manual XY table. Please feel free to contact us when you need assistance. 【Features】 ■ Uniform application of solder paste according to the copper foil patterns of SMT and BGA ■ Stable application of high-viscosity liquids such as solder paste, metal paste, and various adhesives ■ Easy alignment by operating the manual XY table and manipulator (up and down movement of the nozzle) ■ Equipped with an autofocus function, allowing observation at a high resolution of 1280×800 (60fps) ■ Features a twin-air dispenser, enabling manual application of small amounts *For more details, please download the PDF or feel free to contact us.

• dispenser
• Printed Circuit Board
• Soldering Equipment

We offer "Full Function/Basic Function" equipped with the high-precision coating dispenser Twin-air. Real-time observation with top view & side view (FF only). The ultra-fine nozzle lineup is available from a minimum inner diameter of 13μm (custom order). Additionally, the applicable liquid agents include resin materials such as UV curing, epoxy, silicone, polyimide, and resist. 【Performance】 ■ Self-suckback: Prevents liquid beads, wetting, and stringing ■ High viscosity liquid agents: 1000Pa·s (1,000,000cps) ■ Micro-dispensing: Picoliter dots (below 40μmΦ) ■ Fine line drawing: Below 40μm width *For more details, please download the PDF or feel free to contact us.

• Other painting machines
• Painting Machine
• Soldering Equipment

The "Resin Paste Coater" is a product equipped with a Twin-air dispenser that applies the necessary amount of material precisely to the targeted position without waste. Compatible workpieces include various 4 to 12-inch wafers, chip-level substrates, glass substrates, ceramic substrates, resin films, and metal substrates. It also supports polyimide, high-viscosity resist, other high-viscosity liquids, solder paste, solder resist, and flux. 【Performance】 - Full-area coating, chip marking, L/S drawing - Dam structure formation, dot application, localized coating/sealing - Edge cut settings, achieving coating that avoids notches - No overflow of liquid – no need for side and back rinsing - CAD data import for coating area/pattern shape - Maximum film thickness of 100μm, minimum width of 50μm/Φ50μm *For more details, please download the PDF or feel free to contact us.

• Other painting machines
• Soldering Equipment
• Chip type LED

The "EI Series" is a high-precision inline dispensing system designed for production lines. It supports resin materials such as UV-curable, epoxy, silicone, polyimide, resist, as well as conductive materials like Ag/Cu/Au (nano) paste, conductive adhesives, conductive inks, and solder paste. Additionally, it is compatible with carbon black ink, titanium oxide liquid, glass frit liquid agents, solder resist, and various types of flux inks. 【Features of EI-3325】 ■ Inline dispensing device for production lines ■ Equipped with a Twin-air type dispenser that enables a minimum fine application of 50μm ■ Dual-stage installation allows for high-speed application of two workpieces simultaneously ■ High-precision correction through automatic alignment ■ Software allows for adjustment of application size and shape *For more details, please download the PDF or feel free to contact us.

• Other painting machines
• Soldering Equipment

The "ED Series" is a tabletop dispensing system capable of targeting Φ100μm dots. It is compatible with various 2 to 4-inch wafers, printed circuit boards, glass, ceramics, metal substrates, resin films, various 3D works, and cavity interiors. Additionally, it features an auto-alignment function, allowing for easy setting of conditions through the recipe of coating parameters. 【Features】 ■ Tabletop system capable of targeting Φ100μm dots ■ Real-time display of coating operations with a top view ■ Suitable for research and development, prototyping, and small-batch production of various products *For more details, please download the PDF or feel free to contact us.

• Other painting machines
• Soldering Equipment

This document is the PRODUCT DIGEST of Espec Corporation, which features environmental testing equipment and more. We introduce the "Platinus J Series," a low-humidity constant temperature and humidity chamber capable of high-precision low-humidity control, and the "TSA Series," a thermal shock device that allows you to monitor/manage the testing conditions of equipment located remotely from your desk. Additionally, we also provide information on contract testing and after-sales support. Please take a look. 【Contents (partial)】 ■ Environmental testing equipment ■ Semiconductor and electronic device-related equipment ■ Secondary battery-related equipment ■ Pharmaceutical, cosmetic, and food-related equipment ■ Plant production systems and environmental measurement equipment ■ Contract testing, calibration certification, and rental *For more details, please download the PDF or feel free to contact us.

• Environmental Test Equipment
• Other semiconductors
• Secondary Cells/Batteries

The "ICPMS-2040/2050" is an ICP mass spectrometer that achieves a high level of both environmental and analytical performance through an evolved mini-torch system, a newly developed collision reaction cell, and a high-performance quadrupole mass filter. While maintaining the mini-torch system's feature of reduced argon gas consumption, the shape of the torch has been further optimized to lower the sample introduction flow rate into the plasma, thereby improving the ionization efficiency of the sample. Thanks to the high-speed cell gas replacement and pre-rinse function provided by the newly designed gas controller, measurement time can be significantly reduced without the need for special options. 【Features】 ■ Balancing eco-friendliness and high performance ■ Making "speed" more accessible ■ Transforming usability for a new way of working *For more details, please download the PDF or feel free to contact us.

• Mass Spectrometer
• Other metal materials
• Plating Equipment