アイネックス List of Products and Services

This is a fan hub that can split an ARGB LED (Addressable RGB LED, Digital LED) connector into 7 branches and a PWM 4-pin fan connector into 6 branches. It is convenient for connecting multiple PWM 4-pin fans with ARGB LEDs to control their lighting and rotation speed. It allows for simultaneous connection and configuration of up to 6 ARGB LED fans and 1 ARGB LED device. The ARGB LED and fan connectors operate independently, so you can also connect ARGB LED devices other than fans. It can be used for fan branching only or LED branching only. You can connect a SATA power connector to the power supply unit to compensate for power shortages. The back side has a magnetic sheet attached, allowing it to be mounted on metal surfaces inside the PC case. The top of the unit has the connector names printed for easy connection. It has a sleek appearance with a black casing.

The "PA-062B" is an ATX power switch kit that you press when turning on your computer. When the power does not turn on, it is often the case that the switch is faulty. It can also be used as a reset switch. Please check if the specifications are suitable for your usage environment. Feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Push switch ■ Momentary operation (non-lock type) ■ Mounting hole: M3 ■ Mounting hole pitch: 20mm ■ Connector pitch: 2.54mm ■ Cable length: 100cm *For more details, please download the PDF or feel free to contact us.

The "PA-045B" is a reset switch kit used to reset a computer. It can be used for repairs or other DIY projects. It can also be used as a power switch. Please check if the specifications are compatible with your usage environment. This is a model change from "PA-045A." There are no differences. Feel free to contact us if you have any inquiries. 【Specifications】 ■ Push switch ■ Momentary operation (non-lock type) ■ Connector pitch: 2.54mm ■ Cable length: 50cm ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The "DTE-02" is a switch that allows you to operate the power/reset functions of your computer from a distance, right at your fingertips. It is also suitable as a replacement in case the main unit's power/reset switch fails. You can extend the power LED from the motherboard, and the blue ring will light up blue when the power is on. Two USB 2.0 ports are extended from the motherboard to the front, making it convenient for using USB devices. It can be fixed to your desk with double-sided tape on the bottom. 【Specifications (partial)】 ■ Switch - Power: Push switch - Reset: Push switch - Switch operation: Momentary (non-locking type) *For more details, please download the PDF or feel free to contact us.

The "DTE-03" is a switch that allows you to control the power of your computer from a distance, right at your fingertips. The switch has a structure similar to that of a mechanical keyboard, providing a pleasant typing experience. It has a built-in magnet on the bottom, allowing it to be placed on any magnet-compatible surface. For surfaces that are not magnet-compatible, you can use the included metal plate with double-sided tape for installation. 【Specifications (partial)】 ■ Switch: Push switch (momentary operation) ■ Connector pitch: 2.54mm ■ Main cable: Cable length approximately 2m (directly attached to the main unit) ■ LED: Blue ■ Color: Black ■ Accessories: Internal connection branching connector, metal plate with double-sided tape *For more details, please download the PDF or feel free to contact us.

The "BZ-01A" is a buzzer unit with a short cable that is very convenient for testing motherboards. It connects to the speaker terminals on the motherboard. There is no need to secure it to the case, making installation easy. It is a model change of "BZ-01". There are no differences. It is a standalone package of the "KM-01" speaker. 【Specifications (partial)】 ■ Connector: 2.54mm pitch ■ Polarity (will sound regardless of polarity) - Positive: Black (with + symbol on the speaker) - Negative: White ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The "KM-01A" is a set of a very short cable length switch and LED. It is very convenient for motherboard testing, and it is a modified version of the "KM-01." There are no differences. Starting from the shipments around September 2022, the specifications have changed. The printing on the Power LED connector now only shows POWER LED- on the negative side. 【Set Contents】 ■Power Switch ×1 ■Reset Switch ×1 ■Power LED ×1 ■HDD LED ×1 ■Speaker ×1 *For more details, please download the PDF or feel free to contact us.

The "KM-07A" is a long 75cm switch/LED cable that is convenient for testing. It is suitable as a replacement for motherboard testing or if the power/reset switch of the main unit fails. To easily identify which switch is which, there is a black ink mark on the power switch side. To accommodate a 1x3 pin header, the power LED connector uses two separate 1-pin connectors. 【Specifications (partial)】 ■ Power Switch: Push Switch ■ Reset Switch: Push Switch ■ Power LED: Red, 5mm diameter ■ HDD LED: Green, 5mm diameter ■ Switch Operation: Momentary (Non-locking type) ■ Connector Pitch: 2.54mm *For more details, please download the PDF or feel free to contact us.

The "KM-02C" is an ATX power supply testing board that allows for operation verification without incorporating internal parts/peripherals into the case. It features a toggle switch and switch cable, enabling power On/Off in two different ways, which is convenient. (Even when the toggle switch is Off, power can still be turned On/Off via the switch cable.) By connecting a case LED to the LED connector, you can check for power at your fingertips. It is also useful when using multiple power supplies simultaneously. 【Specifications】 ■ 1 shared connector for 20/24-pin main power supply, 1 3-pin connector for fans, and 1 LED connector ■ Includes power-on LED ■ Insulating plate with double-sided tape on the back of the board to prevent short circuits ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The "KM-08" is a power tester that connects between a USB Type-C (USB-C) power source and a device, allowing you to check various information such as voltage, current, power, current direction, D+, D-, CC, and more. It supports a maximum power display of 240W and is compatible with USB PD (Power Delivery) 3.1 voltage. Since it supports bidirectional current, you do not need to choose the direction of insertion. It also displays the direction of the current. The color LCD makes it easy to read the display. 【Specifications (partial)】 ■ Display contents: Voltage / Current / Power / D+ Voltage / D- Voltage / CC Voltage / Current direction / Usage time / Cumulative power during use (energy amount) ■ Compatible with USB PD (Power Delivery) 3.1 ■ Maximum supported power: 240W ■ Operating temperature range: 0 to 40℃ ■ Compliant with USB Type-C standards *For more details, please download the PDF or feel free to contact us.

The "KM-09" is a power checker that connects between a USB Type-C (USB-C) power source and a device, alternatingly displaying the supplied voltage/power. It supports a maximum power display of 140W and is compatible with USB PD (Power Delivery) 3.1 voltage. It supports bidirectional current, so it does not require a specific insertion direction. The main unit is compact, making it easy to carry and not taking up much space when plugged into a cable. The display is easy to read with an 8-segment blue LED. 【Specifications (partial)】 ■ Display content: Voltage/Power/PD operation display ■ Maximum supported power: 140W ■ Maximum data transfer speed: 40Gbps (theoretical value) ■ USB PD (Power Delivery) 3.1: Supported ■ DisplayPort Alt mode: Supported ■ eMarker: Not equipped *For more details, please download the PDF or feel free to contact us.

The "EX-002A" is a pin conversion cable used when the pin arrangement on the motherboard differs from that of LED/USB 2.0/IEEE 1394 cables. It features a connector designed to prevent disconnection. The connector has a 2.54mm pitch, and the cable length is 4.5cm. It includes a total of 8 wires: 2 red, 2 white, 2 green, and 2 black. This is a model change of "EX-002." There are no differences. It cannot be used with connectors of different pitches (such as USB 3.0). 【Specifications】 ■ Connector designed to prevent disconnection ■ Connector: 2.54mm pitch ■ Cable length: 4.5cm ■ Total of 8 wires included (2 red, 2 white, 2 green, 2 black) ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The "EX-004A" is an easy-to-remove and attach cable that effectively prevents incorrect connector insertion. It consolidates the individual pin connectors for Front Panel I/O (such as front panel switches/LEDs/audio/USB 2.0/IEEE 1394) for easy connection to the motherboard. It is compatible with 2.54mm pitch connectors. 【Specifications】 ■Cable side: 2x5 pin male ■Motherboard side: 2x5 pin female ■Connector: 2.54mm pitch ■Cable length: 3cm ■2 pieces included ■Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The 『EX-006A』 is a cable that allows for easy connection and disconnection of connectors, effectively preventing incorrect connector insertion. It consolidates the individual pin connectors for Front Panel I/O (such as front panel switches, LEDs, audio, USB 2.0, IEEE 1394, etc.) for easy connection to the motherboard. It is compatible with 2.54mm pitch connectors. With a length of 15cm, it is suitable for extensions and rear wiring. 【Specifications (partial)】 ■ Cable side: 2x5 pin male ■ Motherboard side: 2x5 pin female ■ Connector: 2.54mm pitch ■ Cable length: 15cm ■ Color: Black ■ 1 piece included *For more details, please download the PDF or feel free to contact us.

The "RS-002F" is a USB rear slot that allows you to extend a connector from the USB 2.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB. It features a set pin type for easy connection to the motherboard. It can be used with 2 ports and is compatible with low-profile slots. It is a model change of "RS-002E." There are no differences. 【Specifications (partial)】 ■ For rear slot (supports full height/low profile) ■ Supported standards: USB 2.0/1.1 ■ Connector configuration - Rear slot side: USB 2.0 Standard-A female x2 - Motherboard side: 2x5 pin female x1 ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

The "RS-004C" is a USB rear slot that allows you to extend a connector from the USB 2.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB ports. It features a pin header type for easy connection to the motherboard. It can be used with 4 ports. This is a model change from "RS-004B." There are no differences. The pin arrangement conforms to general guidelines. 【Specifications (partial)】 ■ For rear slot use ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・ Rear slot side: USB 2.0 Standard-A female x4 ・ Motherboard side: 2x5 pin female x2 ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

The "RS-003D" is a USB 3.0 rear slot that allows you to extend connectors from the USB 3.0 header on the motherboard to the rear slot. Make effective use of unused onboard USB ports. The pin set type makes it easy to connect to the motherboard. Both the cable and bracket are black in color. They are unobtrusive, making them suitable for illuminated PCs or internally painted black cases. 【Specifications (partial)】 ■ For rear slot (supports full height/low profile) ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Rear slot side: USB 3.0 Standard-A female x2 ・Motherboard side: 2x10 pin female *For more details, please download the PDF or feel free to contact us.

The "RS-300B" is a serial rear slot that extends a connector from the serial header on the motherboard to the rear slot. To accommodate motherboards with a serial header near the memory slots, the cable is a longer 47cm. It features a set pin type for easy connection to the motherboard and is compatible with low-profile PCI slots. 【Specifications】 ■ Connector Type - Rear Slot Side: D-Sub 9-pin Male x1 - Motherboard Side: 2x5-pin Female x1 ■ Cable Length: 47cm ■ Accessories: PCI bracket x1, low-profile PCI bracket x1 ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The 『PM-HDMIV20A08』 is a high-speed HDMI extension cable compatible with Ethernet. It extends the HDMI connector on the rear/expansion card, allowing you to install the connector in any location such as the front or rear panel. The nut is embedded in the mold and is secured with the included screws. It features triple shielding and durable gold-plated pins/gold-plated connectors. 【Specifications (partial)】 ■ Connector type - Rear/expansion card side: HDMI female (Type A 19-pin) - Chassis panel side: HDMI male (Type A 19-pin) ■ Color: Black ■ Cable diameter: 6.0mm ■ Cable length: 80cm *For more details, please download the PDF or feel free to contact us.

The "USB-001BC" is a case USB cable that supports most motherboards with an independent pin type. It extends the USB header on the motherboard, allowing connectors to be installed in any location such as the front or rear panel. The nut is attached to the molded recess and secured with a screw. This is a model number change from "USB-001BA," and there are no differences. The product name has been changed. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector type - Panel side: USB 2.0 Standard-A female - Motherboard side: 4-pin female ■ Cable length: 60cm ■ Accessories: 2 screws and 2 nuts for fixing *For more details, please download the PDF or feel free to contact us.

The "USB-001BC10" is a case USB cable with an independent pin type that is compatible with most motherboards. It extends the USB header on the motherboard, allowing connectors to be installed in any location such as the front or rear panel. The nut is attached to the molded recess and secured with a screw. This is a model change from "USB-001BA10," with no differences other than the product name change. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape - Chassis panel side: USB 2.0 Standard-A female - Motherboard side: 4-pin female ■ Cable length: 60cm ■ Accessories: 20 screws and nuts for fixing *For more details, please download the PDF or feel free to contact us.

We would like to introduce our panel mount USB 3.0 cable 'USB-021A'. This cable extends the USB 3.0 header on the motherboard, allowing you to install connectors in any location, such as the front or rear panel. The nut is embedded in the mold and is secured with the included screws. This is a model change of 'USB-021'. There are no differences. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Motherboard side: 2x10 pin female ・Chassis panel side: USB 3.0 Standard-A female x2 ■ Cable length: 60cm *For more details, please download the PDF or feel free to contact us.

We would like to introduce our case USB cable 'USB-002E'. This cable extends the USB connector on the back or expansion card, allowing you to install the connector in any desired location such as the front or rear panel. The nut is attached to the molded recess and secured with a screw. This is a model change of 'USB-002D', and there are no differences. The product name has been changed. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Panel side: USB 2.0 Standard-A female ・Back/expansion card side: USB 2.0 Standard-A male ■ Cable length: 80cm ■ Accessories: 2 screws and 2 nuts for fixing *For more details, please download the PDF or feel free to contact us.

We would like to introduce the case USB cable 'USB-002E10' that we handle. This cable extends the USB connector on the rear/expansion card, allowing you to install the connector in any desired location, such as the front or rear panel. The nut is attached to the molded recess and secured with a screw. This is a model change of 'USB-002D10'. There are no differences; only the product name has been changed. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Panel side: USB 2.0 Standard-A female ・Rear/expansion card side: USB 2.0 Standard-A male ■ Cable length: 80cm ■ Accessories: 20 screws and 20 nuts for fixing *For more details, please download the PDF or feel free to contact us.

We would like to introduce our panel mount USB 3.0 cable, 'USB-022A'. This cable extends the USB 3.0 connector on the back/expansion card, allowing you to install the connector in any location such as the front or rear panel. The nut is embedded in the mold and is secured with the included screws. This is a model change of 'USB-022', and there are no differences. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Back/expansion card side: USB 3.0 Standard-A male ・Chassis panel side: USB 3.0 Standard-A female ■ Cable length: 80cm *For more details, please download the PDF or feel free to contact us.

The "USB-006D" is an extension cable for wiring a case with a USB connector to a motherboard. It is suitable for full tower and server cases. The set connector makes connection easy. By matching it with an internally painted black case, it creates a calm atmosphere. This is a model change from "USB-006C." There are no differences. The pin arrangement is a standard one that complies with guidelines. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Cable side: 2x5 pin male ・Motherboard side: 2x5 pin female ■ Color: Black ■ Cable length: 50cm *For more details, please download the PDF or feel free to contact us.

We would like to introduce our case USB cable 'USB-007D'. This USB cable for motherboards can be changed to connect to USB connectors on rear ports/expansion cards. It is a model change of 'USB-007C'. There are no differences. The pin arrangement follows the general guidelines. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector type ・Cable side: 1x4 pin male ・Rear port/expansion card side: USB 2.0 Standard-A type male ■ Color: Black ■ Cable length: 40cm *For more details, please download the PDF or feel free to contact us.

The 『USB-023』 is a USB cable for cases that changes the connection of external USB devices to the USB header connection on the motherboard. It can be used not only for USB flash drives and various dongles but also for connecting devices that operate on USB power, such as digital clocks and RGB LED controllers. It is also possible to change the internal devices with rear USB connections to the USB header connection on the motherboard. The set connector makes it easy to connect. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Motherboard side: 2x5 pin female ×1 ・Cable side: USB 2.0 Standard-A female ×2 ■ Color: Black ■ Cable length: Approximately 10cm (excluding connectors) *For more details, please download the PDF or feel free to contact us.

The "USB-018A" is an L-shaped extension adapter for USB 3.0 connectors on motherboards. Standard USB 3.0 cables for motherboards are thick and have large connectors, making it difficult to connect in tight spaces. By using this product, you can connect the USB 3.0 header to the cable. It is ideal for small motherboards, compact cases, or when there is limited space around the USB 3.0 header. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Motherboard side: 2x10 pin female ・Cable side: 2x10 pin male L-shaped ■ Size: W26.5×D27.4×H11.5mm *For more details, please download the PDF or feel free to contact us.

The "USB-010B" is a USB 3.0 adapter for cases that converts a USB 3.0 cable for motherboards to connect to USB 2.0 header pins. It allows the use of USB 3.0 devices on motherboards that do not have a USB 3.0 header. The operation will be at USB 2.0 speeds. One adapter provides two ports. This is a model number change from "USB-010A." There are no differences. The pin arrangement follows standard guidelines. 【Specifications】 ■ Connector Type - Cable Side: 2x10 Pin Male - Motherboard Side: 2x5 Pin Female ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The "USB-013A" is a USB 3.0 extension cable for cases that extends the USB 3.0 cable for motherboards. It is suitable for full tower and server cases. The connection is easy with the set connector. It supports 2 ports. This is a model change of "USB-013". There is no difference. The pin layout complies with Intel's published specifications. However, pin 10 is NC. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Cable side: 2x10 pin male ・Motherboard side: 2x10 pin female ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

The 『USB-025』 is a Type-C header conversion adapter that changes the motherboard's USB 3.0 header to a front USB Type-C header (Key-A 20-pin). It is convenient when the front USB Type-C header is not equipped or is lacking. The operation will be USB 3.0 (USB 3.2 Gen 1). The Key-A 20-pin header supports one USB Type-C port or one Standard-A port. 【Specifications】 ■ Supported standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector shape ・Motherboard side: 2x10 pin female ・Cable side: Key-A 20 pin female ■ Size: Approximately W20×D25×H11.0mm *For more details, please download the PDF or feel free to contact us.

The "USB-024" is a Type-C header conversion adapter that changes the motherboard's USB 3.0 header to a front USB Type-C header (Key-A 20-pin). It is convenient when there is no front USB Type-C header or it is lacking. Additionally, its L-shaped design makes it useful for wiring in tight spaces. It is suitable for small motherboards or cases where there is limited space around the USB 3.0 header. The operation is USB 3.0 (USB 3.2 Gen 1). 【Specifications】 ■ Supported Standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector Type - Motherboard side: 2x10 pin female - Cable side: Key-A 20 pin female L-shaped ■ Size: Approximately W30 × D25 × H11.3mm *For more details, please download the PDF or feel free to contact us.

The 『USB-026』 is a conversion adapter that changes the front USB Type-C header (Key-A 20-pin) of the motherboard to a USB 3.0 Type-A connector. It allows external USB devices to connect to the front USB Type-C header on the motherboard. It can also change the connection of internal devices from the rear USB to the front USB Type-C header. This adapter can be used to connect USB memory sticks, various dongles, as well as devices powered by USB, such as digital clocks and RGB LED controllers. 【Specifications (partial)】 ■ Supported standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector type ・Motherboard side: Key-A 20-pin male ・Cable side: USB 3.0 Standard-A female ■ Color: Gray *For more details, please download the PDF or feel free to contact us.

The 『USB-027』 is a conversion adapter that converts the front USB Type-C header (Key-A 20-pin) of a motherboard to an L-shape. It changes the orientation to the opposite side of the KEY (the part with the angled corner) on the motherboard header. The L-shape makes it convenient for wiring in tight spaces. It is suitable for small motherboards or compact cases where there is limited space around the front USB Type-C header. 【Specifications】 ■ Supported Standards: USB3.2 Gen 2/USB3.0/2.0/1.1 ■ SuperSpeed USB 10Gbps compatible (theoretical value) ■ Connector Type ・Motherboard side: Key-A 20-pin male ・Cable side: Key-A 20-pin female L-shape ■ Size: Approximately W22.5×D15×H10.5mm *For more details, please download the PDF or feel free to contact us.

The 『USB-028』 is a conversion adapter that converts the front USB Type-C header (Key-A 20-pin) of a motherboard into an L-shaped connector. It changes the orientation towards the KEY side (the part with the angled corner) of the motherboard header. The L-shape makes it convenient for wiring in tight spaces. It is suitable for small motherboards or compact cases where there is limited space around the front USB Type-C header. 【Specifications】 ■ Supported Standards: USB3.2 Gen 2/USB3.0/2.0/1.1 ■ SuperSpeed USB 10Gbps compatible (theoretical value) ■ Connector Type ・Motherboard side: Key-A 20-pin male ・Cable side: Key-A 20-pin female L-shaped ■ Size: Approximately W22.5×D15×H10.5mm *For more details, please download the PDF or feel free to contact us.

The "HUB-06A" is a hub that splits a USB 2x5 pin header on the motherboard into two. It is convenient for building environments with many internal USB 2.0 devices on motherboards with few USB 2.0 headers. It is recommended when multiple USB 2.0 headers are needed, controlled by LED. The back of the board has pads with double-sided tape attached, allowing it to be installed anywhere inside the PC case. The LED on the board lights up while the hub function is active. 【Specifications (partial)】 ■ Board type, for installation inside PC cases ■ Supported standards: USB 2.0/1.1 ■ High-Speed (480Mbps) compatible (theoretical value) ■ USB bus power only ■ USB ports: 4 (2x5 pin headers for USB 2.0 ×2) *For more details, please download the PDF or feel free to contact us.

The "HUB-07" is a hub that distributes a USB 2x5 pin header on the motherboard into four outputs. It is convenient for building environments with many internal USB 2.0 devices on motherboards that have few USB 2.0 headers. It is recommended for situations where multiple USB 2.0 headers are needed, controlled by LED. The back of the board has pads with double-sided tape attached, allowing it to be installed in any location inside the PC case. The LED on the board lights up while the hub function is in operation. 【Specifications (partial)】 ■ Board type, for installation inside PC cases ■ Supported standards: USB 2.0/1.1 ■ High-Speed (480Mbps) compatible (theoretical value) ■ USB bus power only ■ USB ports: 8 (2x5 pin headers for USB 2.0 x4) ■ LED: Red (while hub function is in operation) *For more details, please download the PDF or feel free to contact us.

The "HUB-09" is a hub that splits a USB 3.0 (2x10 pin) header on the motherboard into two. It is convenient for building environments with many internal USB 3.0 devices on motherboards with limited USB 3.0 headers. It is recommended when multiple USB 3.0 headers are needed in large cases or front bay devices. It comes with a double-sided tape pad for attaching to the back of the board. 【Specifications (partial)】 ■ For installation inside PC cases, board type ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ USB self-powered only ■ USB ports: 4 (2x10 pin header for USB 3.0 x2) *For more details, please download the PDF or feel free to contact us.

The RS-008 allows you to extend a Type-C connector from the front USB Type-C header (Key-A 20-pin, also known as Type-E) of the motherboard to the rear slot. It supports USB 20Gbps. In an environment compatible with USB 3.2 Gen 2x2, it achieves high-speed data transfer of 20Gbps (theoretical value). You can make effective use of unused onboard USB ports. The pin layout conforms to standard specifications. 【Specifications (partial)】 ■ For rear slot (full height only) ■ Supported standard: USB 3.2 Gen 2x2 (backward compatibility with USB 3.2 Gen 2/USB 3.2 Gen 1/3.0/2.0) ■ Maximum data transfer speed: 20Gbps (theoretical value) ■ USB PD (Power Delivery): Not supported ■ DisplayPort Alt mode: Supported *For more details, please download the PDF or feel free to contact us.

The 『EX-007』 is a cable that extends a 2-pin connector on the motherboard. It allows for easy connection of front panel I/O (such as front panel switches/LEDs/audio/USB 2.0/IEEE 1394) with loose pin connectors to the motherboard. With a length of 30 cm, it is suitable for extensions and internal wiring. The ribbon cable keeps the wires organized and makes handling easy. The connectors and cables are black, making them unobtrusive, which is ideal for illuminated PCs or cases with black interiors. 【Specifications】 ■ Motherboard side: 1x2 pin female ■ Cable side: 1x2 pin male ■ Connector: 2.54mm pitch ■ Cable length: 30 cm ■ 2 pieces included ■ Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

The 『EX-008』 is a cable that branches the 2-pin connectors for the power/reset switch and LED on the motherboard. By passing additional switch/LED cables through gaps or holes in the case, you can control the power of the computer and check the LED from your hand. It can be combined with our power switches/LEDs (such as PA-062B, PA-045B, DTE-03, KM-01A, KM-07A, etc.). It is compatible with 2.54mm pitch connectors. 【Specifications】 ■ Motherboard side: 1x2 pin female x1 ■ Cable side: 1x2 pin male x2 ■ Connector pitch: 2.54mm ■ Cable length: 10cm (excluding connectors) ■ 2 pieces included ■ Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.