新興刃物 List of Products and Services

The "Recycling Cutter (Blade for Single-Shaft Shredders)" is a blade used in shredders for the recycling of waste. It is used in the process of further shredding after rough shredding. The material of the blade is selected based on the specifications of the shredded material. In single-shaft shredders for processing materials such as plastics, carbide, high-speed steel, and die steel are commonly used. In recent years, there are also chip-type fixed blades available, allowing for the selection of expensive materials like carbide. Additionally, in cases where materials like SKD11 are used and there are defects, we offer a steel type developed with the concept of enhancing toughness without compromising our original wear resistance. 【Our Features】 ■ Quick Delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We Meet Various Requests We propose appropriate steel types and processing methods based on product specifications. ■ Total Cost Reduction Contributes to reduced blade replacement frequency and extended lifespan.

• Other machine elements

The "Recycling Cutter (Blade for Dual-Shaft Shredder)" is a blade used in shredders for the recycling of waste. It is mainly used for rough shredding of large items. Additionally, the material of the blade is selected based on the specifications of the shredded material. In dual-shaft shredders for shredders, alloy steel for machine structures is the mainstream; however, our company also proposes high-wear-resistant steel types depending on the material being processed and the size of the blade. Not only does this improve hardness, but it also enhances the surface roughness of the blade, making it effective against galling and adhesion, which extends the blade replacement cycle and reduces total costs. 【Our Features】 ■ Quick delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel types and processing based on product specifications. ■ Total cost reduction Contributes to reduced blade replacement frequency and longer lifespan.

• Other machine elements

Metal scrap processing blades (guillotine shear blades) are used in large environmental machines for metal scrap processing. We also handle materials specifically for stainless steel! We can accommodate specifications such as high load machines and high-speed cutting! Since toughness is particularly required, we propose blade materials suitable for chipping and cracking! ○ The share of blades for iron scrap processing guillotine shears is among the top in the country, and they have been used for many years based on our achievements and know-how. ○ We use our original steel types according to the shearing materials (iron, SUS, etc.), and our original steel types have received high praise, especially for SUS steel and high-strength processed materials. ○ We have a wide variety of steel materials that can accommodate various models, allowing for short delivery times. 【Our Features】 ■ A diverse range of steel types proposed due to abundant procurement compared to other companies. ■ Long-standing achievements with major companies in the top share class in the country. ■ Dedicated to solving customer challenges.

• Other machine elements

Recycling companies that are addressing social issues must efficiently and appropriately carry out various processing tasks. One of these tasks includes crushing, shredding, and cutting, and if the blades do not hold up or have poor sharpness, efficient recycling may not be possible. At Shinko Hamono Co., Ltd., we listen to our customers' concerns and propose changes in shape and processing. With a wide range of suppliers, we can select the most suitable steel types based on our customers' usage conditions. We also manufacture blades for heavy machinery, construction equipment attachments, and other specialized shapes. We welcome any questions or consultations regarding various blades for recycling. 【Features】 〇 A diverse range of steel types proposed due to abundant sourcing compared to other companies 〇 Long-standing achievements with major companies in the domestic top market share class 〇 Commitment to solving our customers' challenges We will propose solutions based on our customers' concerns.

• Other machine elements

The "Recycling Cutter (Blade for Multi-Axis Shredder)" is a blade used in shredders for the recycling of waste. It is mainly used for rough shredding of large items. Additionally, the material of the blade is selected based on the specifications of the shredded material. In dual-shaft shredders, alloy steel for machine structures is commonly used; however, our company also offers high-wear-resistant steel types depending on the material being processed and the size of the blade. Not only does this improve hardness, but it also enhances the surface roughness of the blade, making it effective against galling and adhesion, which extends the blade replacement cycle and reduces total costs. [Our Features] ■ Quick Delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We Meet Various Requests We propose appropriate steel types and processing methods according to product specifications. ■ Reduced Total Costs Contributes to lower blade replacement frequency and longer lifespan. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Crusher
• Other machine elements

The "Recycling Cutter (Blade for Single-Shaft Shredders)" is a blade used in shredders for the recycling of waste. It is used in the process of further shredding after rough shredding. The material of the blade is selected based on the specifications of the shredded material. For single-shaft shredders used in shredders, materials such as plastics are often processed, so carbide, high-speed steel, and die steel are used. In recent years, there are also chip-type fixed blades available, allowing for the selection of expensive materials like carbide. Additionally, in cases where materials like SKD11 are used and there are defects, we respond with a steel type developed under the concept of enhancing toughness without compromising our original wear resistance. 【Our Features】 ■ Quick Delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We Meet Various Requests We propose appropriate steel types and processing based on product specifications. ■ Total Cost Reduction Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Crusher
• Other machine elements

We accept regrinding and reprocessing not only of our own products but also of products from other companies. We will respond quickly from our service bases in Tokyo, Nagoya, and Osaka. We can accommodate materials such as structural steel, die steel, high-speed steel, and carbide, and we will do our best to handle shapes like flat and round items. Additionally, we also handle the grinding of rubber rings used in slitter lines, re-plating and grinding of roll products, and rubber lining. We will provide estimates based on grinding specifications and the material of the workpiece. Since we offer our own pickup and delivery service, we can reduce transportation costs compared to other companies! (In areas outside our sales network, you may be required to bear transportation costs.)

• cutter
• Other machine elements

Do you have any concerns regarding cutting tools or machine parts? ▶ They chip in a short time… ▶ The cutting edge wears out… ▶ Frequent replacements lead to high maintenance costs… A professional in cutting tools with over 65 years of experience will solve these problems for you! You can download a case study collection featuring examples of how we have resolved cutting tool issues from the PDF below. Please take this opportunity to download it. 【Case Study Collection Contents】 ■ Case Introductions ■ Strengths of Shinko Cutting Tools ■ Product Usage Examples ■ Unique Products and Services - Environmentally Friendly Cutting Tools - Machine Tool Parts - Contract Processing, etc.

• Other machine elements
• Processing Contract
• Contract manufacturing

Our company has various steel grades and processing technologies to accommodate different shearing materials. We have numerous achievements in steel mills (blast furnace manufacturers and electric arc furnace manufacturers), non-ferrous metal manufacturers, steel plate processing machine manufacturers, coil centers, and shearing processing industries. 【Our Features】 ■ Quick Delivery We have a variety of steel grades available, allowing us to respond flexibly according to the situation. ■ We Meet Various Requests We propose appropriate steel grades and processing methods based on product specifications. ■ Reduced Total Cost Contributes to reduced blade replacement frequency and longer lifespan. 【Product Examples】 ■ Shearing Blades for Steel (Slab Plants) Slab shearing blades are used in slab mills and billet mills. ■ Shearing Blades for Steel (Thick Plate Plants) Responds to the recent high tensile strength of thick plates with the BK series of tough steel. ■ Shearing Blades for Steel (Hot Rolling Mills) Responds with hot work die steel (WK knife) that has high resistance to softening at high temperatures. ■ Metal Shearing Blades (Shear Machine Sharp Blades) Blades used in shearing machines for sheet metal processing. *For more details, please refer to the PDF or contact us.

• Processing Contract
• Contract manufacturing

At Shinko Hamono Co., Ltd., we manufacture rubber rings used for holding steel plates on slitter lines. We use NBR and urethane as materials and adjust the hardness according to the application. Upon request, we can change the color for each diameter to distinguish the outer diameter. We also produce finger-type plate holders used for processing thin materials. 【Features】 ■ Materials used are NBR and urethane ■ Hardness adjusted according to the application ■ For large slitters, we also manufacture split-type rings ■ We can also polish the outer diameter of rubber rings to match knife repairs ■ We also produce finger-type plate holders used for processing thin materials *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Shinko Hamono Co., Ltd., we handle machine parts such as 'rails, plates, and guides (various types).' We manufacture various types of plates used in industrial machinery. We will produce according to your specifications. 【Features】 ■ Application of technology cultivated in metal cutting tool manufacturing ■ Manufacturing of various types of plates used in industrial machinery ■ Production based on your specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "Knife Holder for HES" is a knife holder used in HES-type slitters with hydraulic expanding and contracting shafts. High precision is required because the inner diameter of the holder is clamped by the expanding and contracting shaft. - High precision roundness and cylindricity are achievable with vertical grinding machines! (Track record) Tolerance within 0.003 mm - Inner and outer diameters and end faces can be processed with one chucking using CNC machines, achieving high precision in concentricity and perpendicularity! (Track record) Tolerance within 0.005 mm - The inner diameter surface of the fitting part is treated with surface treatments such as hard chrome plating to improve durability. - Geometric tolerances and other measurements are guaranteed through 3D measuring instruments. 【Our Features】 - Fast delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. - We meet various requests We propose appropriate steel types and processing based on product specifications. - Total cost is reduced Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We manufacture mechanical components such as slitter spacers used in slitter lines, plate-holding rubber rings, separator disk parts, spacers, and hydraulic expansion or air shaft type disk holders. The slitter spacer is a gauge that determines the specified plate width and requires high dimensional accuracy. We will inquire about the specifications of the line and the cut materials to accommodate your needs. - The thickness dimension tolerance is typically 0 to -0.005 mm for standard specifications and 0 to -0.003 mm for high precision specifications. - Recently, spacers for automatic blade assembly machines require high flatness, so we manufacture them with micron-level flatness for thin steel plate processing lines. - Depending on the application and durability, we can accommodate various steel types, including carbon steel for machine structures, alloy steel for machine structures, bearing steel, and carbon tool steel. - In manual assembly lines for thick materials, spacers become larger and heavier. We propose lightweight processing for thick spacers and changing materials to aluminum or resin (types that embed steel pins in resin) to reduce work load. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The side trimming knife holder is a holder used for knives in side trimming devices that shear steel plates and non-ferrous metals to specified plate width dimensions. It is used in high-rigidity thick plate shearing machines, with a maximum production record of 200×φ280×φ725. ○ The holder that receives the blade also requires high precision, similar to the blade itself. Our company has extensive experience with flat and round materials, selecting materials and hardness according to their applications, and designing heat treatment and processing steps to enhance characteristics based on product specifications. (Example) Side trimming knife holder (200×φ280×φ725) Typically made from SCM440, we use SKT4 instead, which has good hardenability to accommodate large components. Oil hardening achieves high hardness throughout the center, improving durability. 【Our Features】 ■ Fast delivery We have a variety of steel grades available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel grades and processing based on product specifications. ■ Total cost reduction Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

It is used in holders for blades of shearing machines and the like. Due to the characteristics of the machine and the blades, we provide high-precision products. 【Features】 ■ Used in holders for blades of shearing machines and the like ■ We provide high-precision products 【Our Company’s Features】 ■ Fast delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel types and processing based on product specifications. ■ Total cost is reduced Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

"Slide ways" are guide rails used on sliding surfaces in machine tools, injection molding machines, continuous stretching machines, and more. For high-rigidity machine corner guides, special steel is used, and they are manufactured with an overall heat treatment specification. We have numerous achievements in producing products over 3 meters long. - We have many achievements in the production of slide ways for machine tools and injection molding machines, sliding rails for various industrial machines, and plates used in steel mills. - The materials used range from mechanical structural alloy steel to alloy tool steel. Slide ways made of alloy tool steel that adopt deep hardening are suitable for high-rigidity machines. There are also products that utilize surface heat treatment, allowing for material and heat treatment selection based on application. [Our Features] - Fast delivery: We have a variety of steel types available, allowing us to respond flexibly to different situations. - We meet various requests: We propose appropriate steel types and processing based on product specifications. - Total cost reduction: Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other machine elements

The "Scrap Shear" is a cutting tool used for processing waste materials such as loss materials from steel plate processing, bulky waste, and metal scraps. Since the materials to be processed vary widely, we will respond with original steel types while considering the balance between wear resistance and toughness based on specifications. ○ For waste processing, alloy steel for machine structures is generally used; however, we adopt original steel types that improve wear resistance and toughness. There are examples where the durability has been improved by more than twice by using our original steel types. ○ If the material to be processed is metal scrap, the possibility of damage increases depending on the strength of the material. We will select the optimal type from our original steel types after consulting about the material to be processed. 【Our Features】 ■ Fast delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We will propose appropriate steel types and processing methods according to product specifications. ■ Total cost is reduced This contributes to reducing the frequency of blade replacements and extending product life. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other machine elements
• Other processing machines

The "Niburashaa/Rabaundishaa" is a cutting tool used for demolition and crushing with construction machinery, employed in the dismantling of reinforced concrete, steel structures, bridges, roadbeds, and ships. We offer a variety of cutting tools through attachment tools. ○ The cutting tools used for construction machinery come in various shapes depending on the attachment. Our company is equipped with numerous machining centers and wire electrical discharge machines, allowing us to handle small-batch production of diverse varieties. ○ We select materials and hardness based on the specifications of the processed items and machines to provide the optimal cutting tools. 【Our Company’s Features】 ■ Fast delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel types and processing methods according to product specifications. ■ Total costs are kept low This contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF materials or feel free to contact us.

• Cutter/Scissors
• Other machine elements
• Crusher

The "Metal Scrap Processing Blade (Guillotine Shear Blade)" is a blade used in large environmental machines for processing metal scrap. It is particularly designed to require toughness and is suitable for materials that resist chipping and cracking. We also offer materials specifically for stainless steel, accommodating specifications such as high load machines and high-speed cutting. ○ The market share for blades used in iron scrap processing guillotine shears is among the top in the country, and they have been used for many years based on our track record and know-how. ○ We use our original steel types according to the materials being sheared (such as iron and SUS). Our original steel types have received high praise, especially for SUS steel and high-strength processed materials. ○ We have a wide variety of steel materials in stock that can accommodate various models, allowing for quick delivery. 【Our Features】 ■ Fast delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel types and processing based on product specifications. ■ Total cost reduction This contributes to reduced blade replacement frequency and longer lifespan. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other machine elements
• Other processing machines

Shinko Blades' environmental blades are capable of producing blades suitable for a wide range of waste processing and crushing, not only for metal scrap but also for wood chips, waste plastics, tires, electric wires, printed circuit boards, and more. We manufacture robust and resilient blades through in-house production. Environmental blades are used for various cutting applications, and since the blades themselves are large, changing blades can be quite challenging. However, Shinko Blades' products have low wear and are strong, resulting in longer blade change cycles and reduced total costs. They are ideal for metal scrap dealers and environmental crushing machine manufacturers. For "special crushing blades," we manufacture blades compatible with various crushers. The tire crushing blades are designed with double-sided specifications and can be re-sharpened, making them economical. 【Features】 ■ Compatible with various crushers ■ Tire crushing blades have double-sided specifications ■ Tire crushing blades can be re-sharpened *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• cutter
• Other machine elements

The "Recycling Cutter (Blade for Multi-Axis Shredder)" is a blade used in shredders for the recycling of waste. It is primarily used for rough shredding of large items. Additionally, the material of the blade is selected based on the specifications of the shredded material. In the case of dual-axis shredders for shredders, alloy steel for machine structures is the mainstream choice, but our company also proposes high wear-resistant steel types depending on the material being processed and the size of the blade. Not only does this improve hardness, but it also enhances the surface roughness of the blade, making it effective against galling and adhesion, thus extending the blade replacement cycle and reducing total costs. [Our Features] ■ Fast Delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We meet various requests We propose appropriate steel types and processing based on product specifications. ■ Total costs are kept low Contributes to reduced blade replacement frequency and longer life. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Crusher
• Other machine elements

The "Recycling Cutter (Blade for Single-Shaft Shredders)" is a blade used in shredders for the recycling of waste. It is used in the process of further shredding after rough shredding. The material of the blade is selected based on the specifications of the shredded material. In single-shaft shredders for shredders, materials such as plastics are often processed, so carbide, high-speed steel, and die steel are used. In recent years, there are also chip-type fixed blades available, allowing for the selection of expensive materials like carbide. Additionally, in cases where SKD11 or similar materials are used and there are defects, we offer a steel type developed with the concept of enhancing toughness without reducing our original wear resistance. 【Our Features】 ■ Fast Delivery We have a variety of steel types available, allowing us to respond flexibly to different situations. ■ We Meet Various Requests We propose appropriate steel types and processing based on product specifications. ■ Total Cost Reduction Contributes to reducing blade replacement frequency and extending lifespan. *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Crusher
• Other machine elements

The "Recycling Cutter" is a blade used in shredders for the recycling of waste. Shinko Blades' environmental blades can be manufactured not only for metal scrap but also for a wide range of waste processing shredding, including wood chips, waste plastics, tires, electric wires, and printed circuit boards. We produce robust and resilient blades through in-house integrated production. Shinko Blades' blades have low wear and are strong, resulting in longer blade replacement cycles and contributing to total cost reduction. 【Environmental Blades】 ■ Recycling Cutter (for single-shaft shredders) ■ Recycling Cutter (for multi-shaft shredders) ■ Special shredding blades ■ Metal scrap processing blades (guillotine shear blades) ■ Nibbler shear, rubber bounty shear ■ Scrap shear *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Other cutting tools
• cutter

Since its establishment, Shinko Hamono Co., Ltd. has specialized in shear blades for steel. Utilizing our expertise in processing long materials, we actively accept requests for applications beyond blades. If you are facing concerns such as: "I can't handle it with extrusion..." "I want to process long items but don't know where to ask..." please feel free to contact us! 【Features】 ■ Capable of processing lengths up to 7000mm ■ Can also handle cross-section processing for large items up to 500×450 ■ Numerous achievements in the production of hardened angle guides for high-rigidity machine tools *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Processing Contract
• Contract manufacturing

We handle metal shearing blades suitable for steel mills (blast furnace manufacturers, electric furnace manufacturers), non-ferrous metal manufacturers, steel plate processing machine manufacturers, coil centers, and shearing processing industries. All of our sales staff possess technical knowledge of blades and will assist with blade specifications and after-sales support. Additionally, we offer a variety of original steels to accommodate various shearing materials. 【Product Examples】 ■ Shearing blades for steel (chunking plants) ■ Shearing blades for steel (thick plate plants) ■ Shearing blades for steel (hot rolling plants) ■ Metal shearing blades (shear machine sharp blades) ■ Slitter line rubber rings *For more details, please feel free to contact us.

• Processing Contract
• Contract manufacturing