日鉄物産マテックス List of Products and Services

In recent years, the electrification of automobiles (EVs) has been advancing. Since they do not use an engine, they do not emit carbon dioxide while driving, making them top-class in environmental performance among eco-cars. In this context, SincoTec has a wealth of experience in fatigue testing for various EV components, primarily serving major automobile manufacturers in Europe. We would like to introduce our state-of-the-art fatigue testing machines from SincoTec. In addition to selling fatigue testing machines, we also undertake contract testing. *For more details, please refer to the PDF materials or feel free to contact us.*

"Torsion Moment Fatigue Testing Machine 'POWER TORSION'" Testing Applications: Powertrain, Transmission, Drive Shaft, Crankshaft, Gearbox Strain Assemblies, etc. ■POWER TORSION (Resonance Type) - Energy-saving, high testing frequency load, short testing time - High precision crack detection - Resonance-driven testing system for fatigue strength analysis - Dynamic testing with average load selection - Torsion moment: up to ±30,000Nm ■POWER TORSION static (Electric Servo Type) - Electric servo-driven testing system for static failure testing - Maximum torque: up to ±8,000Nm ■POWER TORSION dynamic (Hydraulic Servo Type) - Hydraulic servo-driven testing system for operational load testing - Torsion moment: up to ±8,000Nm (static average load) up to ±4,000Nm (static load) - Large torsion angle: ±50° *For more details, please refer to the PDF materials or feel free to contact us.

The SincoTec fatigue testing machine can conduct high-precision tests with high test loads and high test frequencies for compression/tension, torsion, bending, rotation, and internal pressure testing. Its most notable feature, the "resonance-type" fatigue testing machine, is a top manufacturer in the world and is known for its time-saving, energy-efficient, and high-precision testing capabilities. The advantages of the resonance type are as follows: 1. Resonance type: Motor-driven (MOT) type, electromagnetic-driven (MAG) type / dynamic and static testing * The MOT method is unique to SincoTec in the world and is patented. 2. High precision detection of micro-cracks as small as 10μm using proprietary control software. 3. High test loads (1 to 2000 kN) and high test frequencies (standard 300 Hz, maximum 1100 Hz). 4. Compared to hydraulic systems, testing time is reduced by up to 1/10 and testing costs by up to 1/20. 5. Simple structure with low maintenance. No worries about oil leaks due to the absence of hydraulic mechanisms. No need to regularly replace consumables such as hydraulic oil and oil filters. 6. Over 30 years of experience with more than 4,000 units sold worldwide. 7. Custom machine production is possible according to customer requests. Hydraulic, electric, and compression testing machines are also available.

The "POWER SWING MOT (Motor Driven) Series" is a resonance-type fatigue testing machine for materials and components with a test load range of 1 to 2000 kN. The test frequency ranges from 30 to 120 Hz, with a maximum amplitude of 12 mm. It is particularly suitable for material and component testing, especially for tests that require clearance. It is also suitable for low cycle fatigue (LCF) testing. 【Mechanism of the MOT (Motor Driven) System】 ■ Operates at frequencies below the resonance peak ■ Changes primary excitation based on the square of the drive speed ■ Varies the excitation frequency to change the amplitude ■ Adjusts the output amplitude using the excitation frequency *For more details, please refer to the PDF materials or feel free to contact us.

The POWER SWING MAG (Electromagnetic Drive) series is a resonant fatigue testing machine suitable for material test specimens and axial test specimens. The test load ranges from 5 to 550 kN, with a maximum amplitude of 6 mm. It is a system suitable for ultra-high cycle fatigue (VHCF) testing. Please feel free to consult us regarding testing methods, conditions, and objectives. 【Mechanism of MAG (Electromagnetic Drive)】 ■ Operates at the system's resonant frequency at all times ■ Amplifies to the maximum ■ Controls the output amplitude by varying the excitation frequency ■ Excitation frequency *For more details, please refer to the PDF document or feel free to contact us.

The "POWER SWING MOT Internal Pressure" is an internal pressure load fatigue testing machine with a maximum pressure of 3000 bar (300 MPa). The rated load is 100 kN and 400 kN, with a maximum testing frequency of 40 Hz. We use our proprietary control software "EMOTION." Additionally, it is possible to add environmental condition simulations such as vibration excitation and temperature environments. 【Advantages】 ■ Capable of manufacturing internal pressure load testing machines up to 4000 bar (400 MPa) ■ Significantly more energy-efficient than hydraulic systems - Energy consumption: 4 kW for high-frequency loads (depending on testing conditions, etc.) ■ Can inspect internal pressure resistance in the shortest time possible ■ Environmental condition operation simulations can be added (vibration excitation, temperature environments, etc.) *For more details, please refer to the PDF materials or feel free to contact us.

"POWER ROTORQUE" is a fatigue testing machine that combines resonance and electric servo systems. It can handle radial loads of up to 100 kN. The torsional acceleration is ±6°, and the testing frequency goes up to 60 Hz. It also uses our proprietary control software "EMOTION." 【Advantages】 ■ Rotational testing with superimpose function, high-frequency radial and torsional amplitudes ■ Combination of radial load + alternating torsional amplitude (asynchronous operation) ■ Combination of 4-point bending + alternating torsional load (asynchronous and synchronous operation) ■ Radial load / axial load up to 1 MN: 20 kN ■ Radial frequency / torsional frequency up to 60 Hz: 25 Hz ■ Option: Oil conditioning *For more details, please refer to the PDF document or feel free to contact us.

■Twist Testing Machine 'POWER TORSION' 〈Features〉 　✓ Resonance type (electromagnetic drive) twist fatigue testing machine 　✓ Rated load: up to ±6,000Nm 　✓ Testing frequency: 10 to 60Hz 　✓ Maximum twist angle up to ±22.5° < Advantages> 　✓ Average load selectable with or without 　✓ Twisting load with tensile R ratio possible 　✓ Static torsion testing possible 　✓ Winding moment possible 　✓ Torsion moment up to 20,000Nm also possible Additionally, we also offer a two-axis (twist and bend) testing machine 'POWER TORBEN' with a testing frequency of 100Hz, torsion moments of 6kNm, 40kNm, 400kNm, and bending moments of 4kNm, 20kNm, 200kNm. *For more details, please refer to the PDF document or feel free to contact us.

The "POWER ROTATING BENDING" is a rotating bending testing machine with a bending moment range of 2,000 to 350,000 Nm. The testing frequency is 10 to 80 Hz. We use our self-developed control software "EMOTION." Additionally, with the built-in calibration device, static-dynamic comparative measurements can be easily performed. 【Advantages】 ■ Energy-efficient and fast testing ■ Visualization of technical cracks ■ Real load control of maximum strain amplitude ■ Easy static-dynamic comparative measurements with the built-in calibration device ■ Testing according to DIN EN 13260, 13261, 13262 (for railway use) *For more details, please refer to the PDF materials or feel free to contact us.

"POWER SPRING" is a spring testing system compatible with various types of springs. It uses our proprietary control software "EMOTION." We offer "POWER AXLE SPRING" for vehicle springs, "POWER INDUSTRIAL SPRING" for industrial springs, and "POWER BOW SPRING" for leaf springs. 【Features】 ■ Resonance-type fatigue testing machine ■ Compatible with various springs ■ Uses our proprietary control software "EMOTION" *For more details, please refer to the PDF document or feel free to contact us.

Fatigue testing machines for automobiles, railways, aviation, universities, and research institutions! Would you like to shorten your research and development time with the high-precision resonant fatigue testing machine "POWER SWING," which utilizes the principle of resonance? Moreover, not only in production equipment but also in testing machines, the rising electricity costs are increasingly burdening the running costs. The SincoTec resonant fatigue testing machine is highly effective for energy saving. Supports tensile, compression, rotation, bending, twisting, and internal pressure fatigue testing: ✓ Reduced testing time and energy saving ✓ High-frequency loading with low energy consumption due to resonance ✓ High-precision detection of micro-cracks as small as 10μm ✓ No hydraulic mechanism in resonant systems = no worries about oil leaks ✓ The MOT (motor-driven) resonant drive system is unique to SincoTec worldwide Of course, we can also accommodate hydraulic servo and electric servo systems depending on the testing conditions. *For more details, please refer to the PDF materials or feel free to contact us.