赤阪鐵工所 List of Products and Services

"Malie Aina" is a shipboard soundproof floor panel system supported by vibration-damping rubber. It has an approved sound insulation performance of Rw = 47dB, making it suitable for use between dining rooms, recreation rooms, public spaces, and living quarters as well as hospital rooms. Please feel free to contact us when you need assistance. 【Features】 ■ Compact and lightweight, 450×900×50, 14kg/panel ■ Quick installation with "laying and welding" ■ Achieves sound insulation performance of Rw = 47dB with just "product + deck (6mm)" ■ Higher performance can be achieved by adding a deck composition *For more details, please download the PDF or feel free to contact us.

• Office furniture

"malie" is a soundproof room that suppresses noise and creates a quiet onboard environment. On a fishing guidance survey vessel in Shizuoka Prefecture, our product has been adopted to improve the living conditions in three rooms: the captain's room, the chief engineer's room, and the female crew member's room. These three rooms are located on the upper deck directly above the engine at the bow of the ship, yet they achieve a quiet living environment. Our product is a floating structure, panel-type soundproof room designed for vessels. 【Features】 ■ Panel-type soundproof room ■ Self-supporting structure composed of six surfaces: floor, walls, and ceiling ■ Vibration isolation mounts under the floor reduce solid-borne noise ■ Air-tight and heavy panels block airborne noise ■ Only the vibration isolation mounts under the floor make contact with the hull ■ Walls and ceiling are supported to prevent the transmission of vibrations *For more details, please download the PDF or feel free to contact us.

• Office furniture

Our company offers a non-combustible, panel-assembled "commercial soundproof room" utilizing marine technology. We have created a soundproof room by placing walls and ceilings on top of the marine floating floor panel "Marier Aina." It can also be used in hearing examination rooms in hospitals' otolaryngology departments, as well as in inspection rooms and meeting rooms in factories with high noise levels. 【Features】 ■ High sound insulation performance achieved through a floating structure ■ Strong steel panel construction allows for disassembly and reassembly *For more details, please download the PDF or feel free to contact us.

• Office furniture

We would like to introduce the Type B "Telephone Booth" that we handle. The external dimensions are W921×L921×H2,170mm, and the internal dimensions are W791×L791×H2,035mm. Additionally, there are three patterns for the window position. Please feel free to contact us when you need assistance. 【Features】 ■ Three window position patterns ■ Options for right or left door hanging for each pattern ■ External dimensions: W921×L921×H2,170mm ■ Internal dimensions: W791×L791×H2,035mm *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

We would like to introduce the Type A "Telephone Booth" that we handle. The external dimensions are W921×L1,777×H2,170mm, and the internal dimensions are W791×L1,647×H2,035mm. Additionally, there are 2 patterns for the door position and 3 patterns for the window position. Please feel free to contact us when you need assistance. 【Features】 ■ Door position: 2 patterns ■ Window position: 3 patterns ■ Each pattern allows for the selection of right-hung or left-hung doors ■ External dimensions: W921×L1,777×H2,170mm ■ Internal dimensions: W791×L1,647×H2,035mm *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

The "Telephone Booth" is a product that allows for comfortable phone calls even in high noise level environments like an engine room. In the vicinity of the engine, it has achieved an indoor sound pressure level difference of -32dB. Please use it to enhance communication among crew members, such as conversations between the engine room and the bridge. 【Features】 ■ Achieved an indoor sound pressure level difference of -32dB in the vicinity of the engine (measured during land trials at our Toyota factory) ■ Panel construction method for assembling components onboard ■ Installation is also possible on vessels that are already in service *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

We would like to introduce the sea trial data for the 'Soundproof Room Malie' handled by Akasaka Iron Works Co., Ltd. In July 2018, the soundproof room Malie was installed on a vessel subject to noise regulations. The noise reduction effect of this product was confirmed during the sea trial. The measured noise level on Deck B at 82% load showed that the product installed on the port side was approximately 5 decibels quieter than the general noise control room located at the corresponding position on the starboard side. (This corresponds to about 1/3 of the acoustic energy ratio.) [Measurement Results] ■ Approximately 5 decibels quieter than the general noise control room (about 1/3 of the acoustic energy ratio) *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

"Malie" is a shipboard soundproof room characterized by a "floating structure" that stands independently on vibration-damping mounts on the floor, and is assembled on-site. It reduces solid-borne noise, which is a cause of onboard noise, while also suppressing airborne noise through high airtightness panel construction, creating a quiet onboard environment. Additionally, measurements taken on noise-regulated vessels recorded values that were 5 decibels lower compared to rooms with typical noise control measures at the same location. 【Features】 ■ Reduces airborne noise through the airtightness and weight of the panels ■ Suppresses solid-borne noise from the hull with vibration-damping mounts on the floor ■ Self-supporting soundproof room with floor, walls, and ceiling (floating structure) *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment

We would like to introduce our "Soundproof Room malie." Malie means "quiet," and it creates a calm and comfortable space. We also offer a "Telephone Booth" that allows for comfortable phone calls even in the engine room. Please feel free to contact us if you have any inquiries. 【Features】 ■ Soundproof Room malie - Solves ship noise regulations ■ Telephone Booth - Comfortable phone calls even in the engine room *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment

This product is an original soundproof room from Akasaka Iron Works, utilizing marine technology with "fire resistance" and "panel assembly." Thanks to its strong steel panel construction, it can be disassembled and reassembled. The floating structure provides high sound insulation performance. Please use it for various business purposes, including audiology examination rooms in ENT clinics, inspection rooms in noisy factories, meeting rooms, laboratories, and measurement rooms. 【Features】 ■ Noise level difference inside and outside the soundproof room: 35dB (O.A) ■ "Fire resistance" + "panel assembly" utilizing marine technology ■ High sound insulation performance achieved through the floating structure ■ Disassembly and reassembly are possible due to the strong steel panel construction *For more details, please refer to the PDF document or feel free to contact us.

• others

We have developed a loading testing machine capable of applying arbitrary loads up to 60 MN, one of the largest in Japan, to conduct load tests on the main components of seismic isolation devices that we manufacture. Loading tests can be performed on any item that fits within the testing space of 1800mm in width, 1800mm in depth, and 760mm in height, not limited to components of seismic isolation devices. We also accept requests for loading tests on parts subjected to heavy loads, such as those used in bridges, buildings, and ships.

• Other weight measuring instruments

This soundproof room is adopted by research laboratories in universities and research institutions, as well as development departments in companies. Since the installation environment is often limited in space and requires consideration for disaster prevention, simple construction and fire resistance are necessary. Additionally, researchers frequently move between research institutions, making it important for the laboratory to be disassembled and reassembled. This soundproof room is constructed using panels for the floor, walls, ceiling, and doors that are pre-manufactured in the factory and then assembled on-site. All parts are made of steel, ensuring high fire resistance and durability, meeting the aforementioned performance requirements. Depending on the size, the panel jointing work on-site takes almost one day, and even including other tasks such as electromagnetic shielding construction, it can be completed in about two days. For more details, please download the PDF.

• Other weight measuring instruments

We would like to introduce noise control measures using soundproof boxes from manufacturers we have been dealing with for some time. The consultation we received this time was regarding noise from the drive motor of a rolling mill used in the company's factory. Although they had equipped it with an in-house manufactured cover, the noise level remained high. We measured the noise again after installing a soundproof box in place of the existing in-house motor cover. The soundproof box demonstrated sufficient noise reduction effectiveness at high frequency components, and we confirmed a reduction effect of over 10 dB (A) in front and nearly 20 dB (A) on the left side when comparing the overall noise levels before and after the measures were taken. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

Our company operates a foundry with a production capacity of 1,000 tons per month, manufacturing a wide range of products including cast components for internal combustion engines and machine tools. We utilize advanced casting technology developed through the manufacturing of large diesel engines, supported by state-of-the-art factory equipment and planning and development capabilities. 【Supported Products】 ■ Gray Cast Iron: FC250 to FC350 ■ Ductile Cast Iron: FCD400 to FCD600 ■ Alloy Cast Iron: Wear-resistant, heat-resistant, corrosion-resistant cast iron, etc. ■ Single Unit Weight: 100kg to 40t ■ Maximum Dimensions: L 6m × W 3m × H 2m *For more details, please feel free to contact us.

• Steel

The newly introduced NC cylindrical grinding machine is used in our company for processing components such as piston skirts for four-stroke engines. Compared to processing with a general-purpose cylindrical grinding machine, it enables high-precision and high-efficiency machining through numerical control.

• Processing Contract

Our company is engaged in the contract development of industrial equipment and other products, utilizing the technical know-how and large assembly facilities cultivated through the manufacturing of marine diesel engines. We have established a system that covers everything from design to production, assembly, installation, and maintenance inspections. We possess machine tools and equipment, including large five-sided machining centers, capable of machining castings, fabricated products, and forged items. Currently, we are distributing materials that introduce our numerous achievements to date. You can view them via "PDF Download." [Contents (excerpt)] ■ Radio heliograph antenna ■ Outdoor constant temperature chamber ■ Air filter cutting machine ■ Aircraft engine test cell large door ■ Railway vehicle brake testing machine ■ Polarimeter antenna (for solar observation) ■ Base plates for factory equipment ■ Transmission testing equipment ■ Interferometer antenna system ■ CT for the head *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Machinery and equipment installation/dismantling/relocation

We are currently offering materials that explain the basics of "casting," including the types and characteristics of cast iron, the differences between gray cast iron (FC) and ductile cast iron (FCD), and the manufacturing process, aimed at beginners. In the "Casting Process" section, we clearly explain the flow from model making to pouring, finishing, painting, and shipping using photographs. [Contents] ■ What is casting? ■ Flow of the casting manufacturing process ■ Casting process (model making → mold filling, mold removal → melting, pouring → sand removal, chipping → shipping) *This material can be viewed via "PDF Download." We are also offering materials that introduce our casting and inspection facilities. [About Us] We have two cupolas (6t/h) and one electric furnace (1,800kW-3t) as casting equipment, specializing in large heavy cast products. We have numerous achievements in cast components for general industrial machinery such as internal combustion engines, machine tools, and paper-making machinery. *Please feel free to contact us with any inquiries.

• Casting Machine

This device is a chassis dynamometer for two-wheeled vehicles (motorcycles). The tire part is set on the rotating body to simulate a driving condition. By rearranging the weight of the rotating body, it is possible to change the inertial force and collect data. In addition to the above, our company has been involved in the production and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This device is the inertial force rotating body component of a disc brake testing machine for wheels. The rotating body component is adjusted to a balance accuracy of within G2.5, allowing for the rearrangement of inertial forces for brake testing through combinations. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This is an interferometer antenna system installed on the rooftop of Komagane Technical High School in Nagano Prefecture at the request of the National Astronomical Observatory. Conducting interferometric observations using multiple small antennas to achieve the performance of a large-diameter antenna is a first in Japan for a technical high school. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This is the polarimeter antenna system of the National Astronomical Observatory's Nobeyama Solar Radio Observatory. This system is an antenna for solar observation and observes different frequencies from the sun using six antennas with varying parabolic diameters. This antenna has been observing fundamental data on solar activity for 40 years. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This device is a durability testing machine for automotive transmissions. It conducts durability tests on the transmission unit of a vehicle, simulating engine output and tire-side output according to driving conditions. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This is a HEPA cutting device installed at the Nuclear Fuel Cycle Engineering Research Institute. This device automatically cuts contaminated air filters used for air conditioning in radioactive material work areas into small pieces within the device's blow box and sends them to the incineration process. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This is a 3.7-meter diameter quasi-zenith satellite antenna installed at the Okinawa Observatory of the National Institute of Information and Communications Technology (NICT). The antenna is set up for communication with the artificial satellite "Michibiki" and is used for testing the advanced GPS project. As a result of this research, location information has become highly accurate, and the current advanced GPS implementation is progressing. In addition to the above, our company has been involved in the production and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

We have manufactured a radio heliograph device for the Nobeyama Solar Radio Observatory of the National Astronomical Observatory of Japan. This antenna is designed to observe the solar surface, and by arranging a total of 84 parabolic antennas with a diameter of 800 mm in a T-shape over an area of 490 m east-west and 250 m north, it achieves performance equivalent to a 500 m diameter antenna. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For more examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This device is a CT scanner specifically for the head, primarily used for screening neurological disorders such as dementia, Alzheimer's disease, and cancer. It has been in operation at the Shizuoka Prefectural Western Medical Center since 1997. To date, over 300 examinations have been conducted. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This is an automatic large door installed in a test cell for conducting combustion tests on aircraft engines in isolation. The door is designed to prevent noise from leaking outside during jet engine inspection and maintenance, featuring a soundproof structure. The two large doors are secured in place by negative pressure. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For more examples, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

We would like to introduce some of the processing machines we have. This is the OKK vertical machining center "VM660R," which was newly introduced in 2019. The table size is 1400mm x 660mm, with a loading capacity of 2000kg. It is mainly used for processing medium and small parts. We are incorporating the latest technology and striving to improve our manufacturing capabilities. ■Production Achievements Connecting rods Piston heads, etc.

• Processing Contract

Our equipment specializes in the production of large cast iron products, but we also manufacture small products in collaboration with partner companies. This case introduces small cast iron products that have a track record of producing several dozen to about a hundred pieces in a single order. We manufactured wheels for transport carts used in the factories of industrial product manufacturing companies using FC material. The wheels have a diameter of 280 mm and weigh approximately 13 kg each, making them manageable to lift by hand. Even in areas where we are not as proficient, we have connections with numerous partner companies and are engaged in various products. Additionally, we have a track record of cast iron products across various industries, so for more details, please refer to our "Company Profile." If you have any questions or concerns, please feel free to contact us. Our Products ■ Materials Handled Ordinary Cast Iron (Gray Cast Iron) FC200 to FC350 Ductile Cast Iron (Spheroidal Graphite Cast Iron) FCD400 to FCD600 Low Alloy Cast Iron, including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models Handled Wood patterns, foam patterns, FM (Full Mold) *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

We manufacture test plates for automotive testing machines. The product is made using the full mold casting method, where a polystyrene model is embedded directly in sand, and molten heat is poured in. Compared to wooden pattern models, this method reduces the man-hours required for casting, allowing for shorter delivery times. Additionally, we have a proven track record of various cast products across different industries, so please refer to our company brochure for more details. If you have any questions or uncertainties, please feel free to contact us. Our products: ■ Materials handled Ordinary cast iron (gray cast iron) FC200 to FC350 Ductile cast iron (spheroidal graphite cast iron) FCD400 to FCD600 Low alloy cast iron products, including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models handled Wood patterns, foam patterns, FM (full mold) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

We would like to introduce some of the processing machines we have. We mainly process parts for diesel engines, but we can also machine parts for industrial and manufacturing machinery in other industries. ■ Production Achievements Crank pin bearings Piston skirts, etc.

• Processing Contract

We would like to introduce some of the processing machines we have. We mainly process parts for diesel engines, but we can also machine parts for industrial and mechanical equipment in other industries. ■ Production Achievements Cylinder heads Piston heads Cylinder liners, etc.

• Processing Contract

This cast product serves as the base and frame that form the skeleton of a gravure printing machine. Printing machine manufacturers have adopted it, appreciating its characteristic of absorbing vibrations from the cast material. In our casting production, we establish efficient production plans for bases and frames with a large number of parts, ensuring timely delivery according to your needs. Additionally, we have a proven track record of cast products across various industries, so please refer to our "Company Profile" for more details. If you have any questions or concerns, please feel free to contact us. Our Products ■ Materials Handled Ordinary cast iron (gray cast iron) FC200 to FC350 Ductile cast iron (spheroidal graphite cast iron) FCD400 to FCD600 Low-alloy cast iron, including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models Handled Wood patterns, foam patterns, FM (full mold) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

We have manufactured the components of a press machine. This casting is produced using the full mold casting method, where a polystyrene model is directly embedded in sand, and molten heat is poured in. Compared to wooden models, this method reduces the number of processes required before casting, allowing for shorter delivery times. Additionally, we have a proven track record of various casting products across different industries, so please refer to our company brochure for more details. If you have any questions or concerns, please feel free to contact us. Our handled products: ■ Materials handled Ordinary cast iron castings (gray cast iron) FC200 to FC350 Ductile cast iron castings (spheroidal graphite cast iron) FCD400 to FCD600 Low alloy cast iron castings, including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models handled Wooden models, foam models, FM (full mold) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

We own multiple cylindrical grinding machines. We have a proven track record in machining industrial and mechanical machine parts. Maximum processing diameter: Φ600, Maximum workpiece: 4000mm ■ Production achievements Piston pins, crosshead pins Diesel engine parts

• Processing Contract

Has a proven track record in machining industrial and industrial machine parts. Examples of production achievements: - Connecting rods (conrods) Φ700, etc. - Piston rods L=1800, etc., various types. ■Production achievements Parts for diesel engines Rods for industrial and machine tools.

• Processing Contract

We are capable of machining large industrial and manufacturing machine parts. Examples of production achievements: - Crankshaft for forging machines: Length = 2,900mm, Shaft diameter: Φ340mm, Pin diameter: Φ400mm, Weight: 1,500kg - Crankshaft for stamping machines: Length = 3,270mm, Shaft diameter: Φ270mm, Pin diameter: Φ220mm, Weight: 1,500kg ■ Production achievements Crankshaft for diesel engines Crankshaft for industrial machinery

• Processing Contract

We manufacture the constituent materials for large pump products delivered to water-related facilities such as sewage and drainage systems, rivers, and agricultural uses. Among a wide range of types and sizes, our company has a wealth of experience with lightweight materials ranging from about 1 ton to about 16 tons, including lift pipes, elbows, bases, and casings. Additionally, we have a proven track record with various cast products across different industries, so please refer to our company brochure for more details. If you have any questions or concerns, please feel free to contact us. Our Products ■ Materials Handled Ordinary cast iron (gray cast iron) FC200 to FC350 Ductile cast iron (spheroidal graphite cast iron) FCD400 to FCD600 Low-alloy cast iron including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models Handled Wood patterns, foam patterns, FM (full mold) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

We are capable of machining large industrial and industrial machine parts. We have processing machines with table sizes ranging from 1,500 to 10,000 mm. ■Production Achievements Cylinders and base plates for diesel engines Test stands for automobiles Beds and crowns for press machines

• Processing Contract

We have a track record of producing cast materials for automotive press molds (such as holders and pads). Materials: FC300, FCD500 We can accommodate using the full mold method. Additionally, we have experience with various cast products across different industries, so please refer to our "Company Profile" for more details. If you have any questions or concerns, please feel free to contact us.

• Contract manufacturing

We manufacture the main body of the plating tank used to melt aluminum for plating processes. Using this plating tank, we apply an aluminum coating to the surfaces of products that require heat resistance and corrosion resistance, such as chimneys, ducts, incinerators, steam boilers, marine chimneys, bolts, and nuts. This plating tank increases hardness and suppresses cracking by adding a certain amount of chromium (Cr) to standard gray cast iron (FC). *The product photo shows the tank in actual use, with aluminum being melted and products being coated on-site. Additionally, we have a proven track record with various cast products across different industries, so please refer to our "Company Profile" for more details. If you have any questions or concerns, please feel free to contact us.

• Contract manufacturing

This product differs from standard gray cast iron (FC) by incorporating a certain amount of copper to enhance its strength. It is a component of the cardboard punching machine used by cardboard manufacturing companies. In addition to the product shown in the photo, we also manufacture beds and tables that are installed on the lower level, and we have experience with larger products that are one size up from this model. The dimensions range from L=1600 to approximately 2100, and the weight is between 2t and 6t. Furthermore, we have a proven track record of various cast products across different industries, so please refer to our company brochure for more details. If you have any questions or concerns, please feel free to contact us. Our Products ■ Materials Handled Ordinary cast iron (gray cast iron) FC200 to FC350 Ductile cast iron (spheroidal graphite cast iron) FCD400 to FCD600 Low alloy cast iron including wear-resistant and heat-resistant castings containing Cr, Cu, Ni, Mo, B, etc. ■ Models Handled Wood patterns, foam patterns, FM (full mold) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

Akazaka Iron Works Co., Ltd. has developed and manufactured numerous engines for fishing boats, expanding its business alongside the growth of the fishing industry. The brand name "Akazaka Diesel" is well-known not only in Japan but also worldwide, and its excellent quality and technology have become a driving force in elevating our country to one of the world's leading fishing nations. In recent years, we have also applied the technical skills and manufacturing know-how acquired from engine production to other fields, broadening our business scope. 【Business Activities】 ■ Manufacturing and sales of marine diesel engines ■ Manufacturing and sales of various machinery and equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Taikuu Air Motor" allows for easy adjustment of torque and horsepower by changing air pressure. It operates using compressed air, making it safe even in explosive and flammable atmospheres, as it does not generate sparks or high temperatures, eliminating the need for explosion-proof structural costs like other power sources. By storing compressed air in tanks or similar containers in advance, it can be utilized as an emergency drive source by supplying compressed air during power outages. 【Features】 ■ Low risk of sparks ■ The motor does not burn out and can handle overloads ■ Easy output adjustment ■ Smooth starting, stopping, and reversing ■ Resistant to humid dust *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

Our company operates a foundry with a production capacity of 1,000 tons per month, manufacturing a wide range of products including cast parts for internal combustion engines, machine tools, printing machines, and general industrial machinery, as well as various large pump casing castings, press die castings, and various types of base plate castings. We utilize advanced casting technology developed through the manufacturing of large diesel engines, supported by cutting-edge factory equipment and planning and development capabilities. 【Supported Products】 ■ Gray Cast Iron: FC250 to FC350 ■ Ductile Cast Iron: FCD400 to FCD600 ■ Alloy Cast Iron: Wear-resistant, heat-resistant, corrosion-resistant cast iron, etc. ■ Single Unit Weight: 100kg to 40t ■ Maximum Dimensions: L 6m × W 3m × H 2m *For more details, please feel free to contact us.

• Contract manufacturing