オガワ精機 List of Products and Services

- All products are carefully assembled and calibrated by skilled technicians. - The CNC-machined aluminum chassis is sturdy yet lightweight. - A combination of bearing balls of different sizes reduces the friction of the pressure needle and improves accuracy. - Achieves a higher precision (0.5) than generally required by various standards (1). - Products are available for Shore A, A0, B, C, D, D0, E, 0, 00, 000, 000S. (Please inquire about products compatible with Asker C, CS, F.) - Customizable pressure surfaces. - The included carrying case protects the device from damage and dust when not in use. - Uses a non-glare (matte) scale. - The standard block (optional) allows for easy verification of the durometer's accuracy. - The test stand holds the durometer vertically against the sample surface.

• Other measurement, recording and measuring instruments

Fully automatic electronic control eliminates the need for complex settings. It can purify ultrapure water with a resistivity of 18.25 MΩ.cm, conductivity of 0.055 μS/cm, and organic matter content of <1 CFU/mL. The LED display shows the status of the device in real-time, including "water purification," "cleaning," "full tank," and "low water." In the event of a malfunction, the backlight color changes to indicate a warning. It features a built-in RO membrane automatic cleaning program (self-cleaning every seven days), a self-test at startup, a low water protection alarm, and an automatic reset function during power outages. Available in two types: tabletop and wall-mounted, with four models to choose from based on purification capacity. The water quality corresponds to A3 of JISK0557 "Water used for testing water supply and drainage." It includes a built-in 12L pressurized container.

• Pure water production equipment

Fully automatic electronic control eliminates the need for complex settings. It can purify ultra-pure water with a resistivity of 18.25 MΩ.cm, conductivity of 0.055 μs/cm, and organic matter content of <1 CFU/mL. The LED display shows the status of the device in real-time, including "water purification," "cleaning," "full tank," and "low water." In the event of a malfunction, the backlight color changes to indicate a warning. It features a built-in RO membrane automatic cleaning program (self-cleaning every 7 days), a self-test at startup, a low water protection alarm, and an automatic reset function during power outages. Available in two types: tabletop and wall-mounted, with four models to choose from based on purification capacity. The water quality corresponds to A3 of JISK0557 "Water used for testing water supply and drainage."

• Pure water production equipment

Measures and displays carbon dioxide concentration up to 9999 ppm in 1 ppm increments (accuracy ±70 ppm※2). The carbon dioxide concentration is indicated by numerical values and background colors (three colors: green, yellow, red) to show the status. Simultaneously measures temperature and humidity, displaying the values below the carbon dioxide concentration. Wall-mounted with a large-sized LED display that provides good visibility from a distance with large characters. An alarm notifies when the carbon dioxide concentration exceeds the set value. Comes with an AC adapter for power supply. By continuously measuring and displaying CO2 concentration, it contributes to raising awareness of infection control and fostering a sense of security. ※2: For details, please refer to the specifications section below.

• Other environmental analysis equipment

Measures and displays carbon dioxide concentration from 400 to 5000 ppm in 1 ppm increments (accuracy ±75 ppm*2). The carbon dioxide concentration is indicated by numerical values and background colors (three colors: green, yellow, red). Simultaneously measures temperature and humidity, displaying numerical values below the carbon dioxide concentration. Equipped with an "Automatic Baseline Correction (ABC)" function for calibration according to the installation environment. Displays the historical trend of CO2 concentration in a graph, retaining records for the past 5 hours. Contributes to raising awareness of infection reduction and fostering a sense of security by continuously measuring and displaying CO2 concentration. Indicates battery level with an icon to provide an estimate of the remaining charge. Supports two power sources: lithium-ion rechargeable battery (USB charging) and AC power. *2: For details, please refer to the specifications section below.

• Other environmental analysis equipment

Capable of measuring and displaying carbon dioxide concentration up to 9999 ppm in 1 ppm increments (accuracy ±75 ppm※2). The carbon dioxide concentration is indicated by numerical values and background colors (three colors: green, yellow, red) to show the status. Simultaneously measures temperature and humidity, displaying the values below the carbon dioxide concentration. Allows setting alarms and their volume for any desired upper/lower limit values of carbon dioxide concentration. Settings can be protected with a password. Brightness of the screen display can be adjusted as desired, with an automatic dimming function at night. Includes two calibration modes: "Reset to factory settings (manufacturer's calibration)" and "Automatic calibration." CO2 concentration trends are graphically displayed, with past records retained for seven days. Powered by AC through a USB port, and data output to a computer is also possible via the same port.

• Other environmental analysis equipment

Visualize the concentrations of PM2.5, PM10, TVOC, and HCHO. Measure and display temperature and humidity. Can store 5,000 data points internally, allowing for historical review. Battery level icon display to inform about charging status. Clear measurement values displayed on a large color LCD screen. Includes USB port, can be connected to the main power supply. Equipped with an automatic sleep function. Alerts when values exceed set thresholds (default setting is 35ppm/PM2.5). Informs with screen color according to the 5-level AQS standards.

• Other environmental analysis equipment

The 30° tilt allows for the best posture to be maintained for the head, enabling optimal observation and reducing fatigue during long observation periods. A single 5W LED with bright white lighting (3000-3300K) reduces user fatigue compared to conventional LEDs. By using a plug-in polarizing filter kit, simple polarized observation is possible. Various filters can be selected to achieve optimal observation effects tailored to user needs. It is equipped with a 5-hole revolving nosepiece, allowing for the use of five different objective lenses. Direct price starts at 800,000 yen (excluding tax).

• Optical microscope

Coarse movement is 38mm, and fine adjustment accuracy is 0.002mm, allowing adjustments on both sides. It is equipped with a 5-hole revolver, enabling the use of five different objective lenses by switching between them. By using a plug-in polarizing plate kit, simple polarized observation is possible. A metal stage plate with a diameter of 25 mm is available as an option. It comes with a digital camera port for capturing photos and videos, allowing for image analysis on a computer. It features coaxial low-position adjustment rulers and stage extension boards, widely accommodating the needs of customers seeking different analytical approaches by expanding the applicable range. Direct price starts at 656,000 yen (excluding tax).

• Optical microscope

1. Training with a variety of fire extinguishers is possible depending on the fire situation. - Not only can powder extinguishers, carbon dioxide extinguishers, and foam extinguishers be used, but also water extinguishers for training purposes, etc. - For training water extinguishers, a gas valve pedal is used for manual extinguishing. 2. Complies with the German standard "DIN 14097-2". - There are sales records in France, the UK, Belgium, Greece, and other countries around the world. - As of now, there are no standards that should be complied with in Japan. 3. Installation is as simple as placing the device, and ignition is a one-push button operation! - By adjusting the included regulator, the flame height can be adjusted between 50 to 80 cm. - No water is needed, and propane gas (LP gas) is used. 4. High safety. - The wired remote control has a cable length of 6 meters, allowing safe operation from a distance. - By attaching the gas valve pedal, gas can also be shut off with the foot. 5. High durability. - Adoption of high-grade material 【SUS316L】. - Compared to the commonly used austenitic stainless steel SUS304, it excels in corrosion resistance and pitting resistance. It is the highest quality stainless steel that is also resistant to rust.

• others

Visualize the concentrations of PM1.0, PM2.5, PM10, formaldehyde, and TVOC (total volatile organic compounds). Display the trends of PM1.0, PM2.5, and PM10 over the past 24 hours in a graph. Measure and display temperature and humidity. Display can be switched according to purpose. Battery level icon indicates charging status. Display measurement values clearly on a large color LCD screen. Alarm function (with snooze). Notify air quality index (AQI) standards with colors (five levels excluding harmful).

• Other environmental analysis equipment

The speed of grinding can be set with airflow. 300 grams can be ground in about 30 to 50 seconds, with a high-speed processing capability of approximately 18 kilograms per hour with continuous feeding. It rotates 16,800 times per minute and can use different sizes of screens (0.3, 0.4, 0.5, 0.6 mm). The processing speed is fast, and the structure is designed to be less prone to internal contamination. With a low-speed processing setting, it can grind grains with a moisture content of up to 25%. The door of the housing is equipped with a sensor and has a safety feature that automatically stops when opened. It complies with international standards: ICC-107/1, AACC-56-81.03, ISO-3093.

• Crusher

It consists of six parts: measuring container, filling container, transport container, float, blade, electronic balance. It is made of draft brass (brass) in accordance with ISO 7971-3:2019. It can be utilized in grain import businesses, inspection agencies, and production management offices.

• Other weight measuring instruments

Measures the concentration of HCHO (formaldehyde) and TVOC (total volatile organic compounds) and displays the respective values. The display units can be selected as ppm or mg/m³. Results are clearly shown on a large display for good visibility. If high levels of TVOC or HCHO are detected, a red screen and alarm will notify the user. It has a built-in battery, making it portable for measurements in any location. A battery level icon indicates the remaining battery life. It allows for the measurement of formaldehyde and TVOC at a relatively low cost.

• Other environmental analysis equipment

Measures and displays the concentrations of CO2, PM1.0, PM2.5, PM10, and TVOC (total volatile organic compounds) along with the AQI, allowing for the verification of many items under the Labor Safety and Health Act. Measures and displays temperature and humidity. Informs the status using numerical values and background colors (green, yellow, red). Updates measurement values every second. By displaying CO2 measurements, it fosters a sense of security against infectious diseases. Displays a battery level icon to indicate charging status. Shows measurement values clearly on a large color LCD display. Graphs the trends of PM1.0, PM2.5, and PM10 over the past five hours. Informs the status using numerical values and background colors.

• Other environmental analysis equipment

We would like to introduce our "Double Door Horizontal Fireproof Storage Cabinet." It is FM Approvals certified and complies with the regulations of the Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA). The three-point latch system (top, middle, bottom) ensures that the doors close securely, completely preventing the intrusion of flames. The steel shelf, with a load capacity of 120 kg, is mounted with shock-resistant hooks, and the position of these hooks can be easily adjusted. 【Features】 ■ Economical design ■ Entire cabinet made of 1.2mm double-layer steel plate with a 38mm air insulation layer ■ Isolation from heat sources and the interior ■ Allows for the discharge of gases from the interior by connecting an exhaust pipe ■ Prevents the intrusion of flames into the storage area *For more details, please refer to the PDF document or feel free to contact us.

• cabinet

We would like to introduce our "Sliding Door Fireproof Storage Cabinet." The cabinet features a double structure made of 1.2mm steel plate and a 38mm air insulation layer, allowing for the isolation of heat sources from the interior. It has obtained FM Approvals certification and complies with the regulations of the Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA). With a three-point latch system at the top, middle, and bottom, it completely prevents the intrusion of flames when the door is closed. 【Features】 ■ Three types of cabinets ■ Capable of discharging internal gases by connecting exhaust pipes ■ Flame arrestor prevents the intrusion of flames into the storage area ■ Hook positions can be easily adjusted ■ Leveling adjustments can be made with four adjusters *For more details, please refer to the PDF document or feel free to contact us.

• cabinet

We would like to introduce our "Single Door Small Fireproof Storage Cabinet." The steel shelf has a load capacity of 120 kg and is mounted with shock-resistant hooks, which can be easily repositioned. The lower part of the cabinet can be leveled using four adjustable feet. It has obtained FM Approvals certification and complies with the regulations of the Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA). 【Features】 ■ Economical design ■ Three types of cabinets ■ Can isolate heat sources from the interior ■ Allows for the discharge of internal gases by connecting an exhaust pipe ■ Prevents flames from entering the storage area with a frame arrestor *For more details, please refer to the PDF document or feel free to contact us.

• cabinet

We would like to introduce the "Single Door Vertical Fireproof Storage Cabinet" that we handle. The cabinet is designed with diagonal exhaust vents, allowing for the internal gases to be expelled by connecting exhaust pipes. The frame arrestor (flame extinguishing metal wire) installed at the exhaust vent prevents flames from entering the interior of the storage cabinet. The entire cabinet features a double structure made of 1.2mm steel plates and a 38mm air insulation layer, which isolates the heat source from the interior. 【Features】 ■ Compact model suitable for environments with limited workspace ■ Economical specifications ■ Three-point latch system (top, middle, bottom) ■ Completely prevents the intrusion of flames when the door is closed ■ The position of the hooks can be easily changed *For more details, please refer to the PDF document or feel free to contact us.

• cabinet

We would like to introduce our "Gas Cylinder Fireproof Storage Cabinet." With a three-point latch system (top, middle, bottom), the door closes securely to completely prevent the intrusion of flames. The lower part of the cabinet can be leveled using four adjustable feet. The steel shelf has a load capacity of 120 kg and is mounted with impact-resistant hooks, which can be easily repositioned. Please feel free to contact us if you have any inquiries. 【Features】 ■ FM Approvals certified ■ Complies with regulations from the Occupational Safety and Health Administration and the Fire Association ■ Economical design ■ Entire cabinet made of 1.2mm steel plate with a double structure and a 38mm air insulation layer ■ Leveling adjustable with four feet *For more details, please refer to the PDF document or feel free to contact us.

• cabinet

This product is an economically designed oil tank fireproof storage cabinet. It has obtained FM Approvals certification and complies with the regulations of the Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA). Designed with diagonal exhaust vents, it allows for the discharge of internal gases by connecting exhaust pipes, and the flame arrestor installed at the exhaust vent prevents flames from entering the storage cabinet. 【Features】 ■ Three types of cabinets ■ Isolation from heat sources and the interior ■ Three-point latch system (top, middle, bottom) ■ Completely prevents flame intrusion ■ Hook positions can be easily adjusted *For more details, please refer to the PDF materials or feel free to contact us.

• cabinet

The "OSK 93JM801" is a freeze dryer equipped with an optional CIP cleaning function. The shelf plates with a surface roughness parameter (RA) of less than 0.4μm efficiently equalize the temperature through internal heat exchange, allowing for stable and uniform drying of samples. A separate manifold allows for connection to the manifold during the operation of the dry chamber. 【Features】 ■ Selection between automatic and manual modes ■ 7” TFT LCD touch screen ■ Monitoring of cold trap temperature, vacuum level, etc. ■ Defrost system using hot gas solenoid method ■ Capable of removing ice within 30 minutes *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "OSK 93JM601" is a tabletop freeze dryer with a maximum full freezing capacity of 3 liters. It prevents moisture from entering the vacuum pump of the concentration system. The condenser freezes below -80°C and performs automatic freeze-drying. Using hot gas, it defrosts and drains condensed ice within 30 minutes, and the vacuum pump prevents oil backflow with a two-stage control gas ballast valve. 【Features】 ■ Manual and automatic mode selection switch ■ Concentration system switch ■ Automatic cascade cycle refrigeration system ■ Condensation process is visually monitored ■ Corrosion-resistant condenser *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "OSK 93JM501" is a freeze dryer equipped with a shelf-freezer for preliminary freezing. With a high-speed centrifuge, condensation can be achieved in a limited space under vacuum. While preventing moisture from entering the vacuum pump of the concentration system, the condenser freezes below -80°C and performs automatic freeze-drying. Manual control allows for more detailed monitoring and observation of the freeze-drying process, and the vacuum pump features two-stage control of the gas ballast valve. 【Features】 ■ Automatic cascade cycle refrigeration system ■ Condenser: stainless steel drum type ■ Condensation process is visually monitored ■ Condenser is corrosion-resistant ■ Hot gas defrosts condensed ice on the trap within 30 minutes and drains it *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "OSK 93JM401" is a freeze dryer compatible with multi-port and dry chambers. Thanks to its powerful cooling system, it rapidly lowers the temperature to -40°C and uniformly disperses samples through its rotation system, achieving efficient drying and a short lead time. While preventing moisture from entering the vacuum pump of the concentration system, the condenser freezes at below -80°C and performs automatic freeze-drying. 【Features】 ■ Allows for more detailed monitoring and observation of the freeze-drying process ■ The condenser maintains a cold trap temperature below -80°C ■ Collects moisture uniformly ■ The condensation process is visually observable ■ The condenser is corrosion-resistant *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "OSK 93JM301" is a freeze dryer equipped with an automatic cascade cycle refrigeration system. While preventing moisture from entering the vacuum pump, the condenser freezes at below -80°C and performs automatic freeze-drying. With manual control, more detailed monitoring and observation of the freeze-drying process can be achieved, and the stainless steel drum-type condenser maintains the cold trap temperature below -80°C, uniformly collecting moisture. 【Features】 ■ The condensation process is visually monitored. ■ The condenser is corrosion-resistant. ■ Hot gas defrosts the condensed ice on the trap within 30 minutes and drains it. ■ The vacuum pump has a two-stage gas ballast valve control. ■ Prevents oil backflow. *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The product is a pump flow integrator that automatically adds defoamer. By combining it with roller pumps or syringe pumps, the amount of liquid injected during the operation time of the control process can be visually confirmed. It measures the catalytic activity of numerous catalysts (esterases, acylases, lipases, proteases, and other catalysts using pH stat). 【Features】 ■ Controls pH during chemical reactions that change pH due to the addition of acids or bases ■ Manages and quantifies cellular metabolic activity during fermentation and cell culture ■ Records foam formation ■ Records the addition of active ingredients during exothermic reactions ■ Records the consumption of active ingredients during titration, gel gradient formation, chromatography, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "OSK 52MB501" is a powder-specific pump that can be freely programmed. It automatically performs continuous and quantitative powder dispensing of powders and crystalline samples without the use of a spoon. With multiple seals, it achieves airtightness and can be used in slightly pressurized and depressurized environments, making it easy to install in complex laboratory equipment. 【Features】 ■ Dispensing speed range: 0–999 ■ Reproducible dispensing flow rate (e.g., NaCl is 50mg/min to 50g/min) ■ Easy assembly and cleaning ■ Compliance with GLP requirements and safety standards ■ Remote control *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "OSK 52MB401" is a universal type pump that accommodates everything from micro syringes to large capacity syringes. It can handle plastic, glass, and metal syringes without the need for adapters. The syringes are securely fixed in both the dispensing and injecting directions. With the highest mechanical stability, it provides vibration-free high pump output and precise flow rates, making syringe handling easy. 【Features】 ■ High precision and excellent cost-effectiveness ■ Programmable (99 levels of dispensing and injecting) ■ Swiss quality motor and ball screw ■ Dual valve output ■ Remote control *For more details, please refer to the PDF document or feel free to contact us.

• Syringe Pump

The "OSK 52MB301" is a product that can collect fractions according to arbitrary racks and containers. The main body of the collector is positioned above the tube, and the lower half can be installed in a constant temperature or low-temperature constant temperature bath. It is equipped with a pump flow stop function during sample collection intervals. It can also be used for sampling during cell culture, fermentation, and chemical reactions. Please feel free to contact us when you need assistance. 【Features】 ■ No risk of spillage ■ Selection of line-type or zigzag-type sample collection ■ Pause/interrupt settings (0.1-999.9 minutes or 1-9999 minutes) ■ Automatic stop function at the end of sample collection ■ Unlimited number of programs *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This product is a newly designed mass flow controller specifically for the fermenter bioreactor "OSK 52MB201." With this device, precise automatic pH control in cell culture is possible without the need for other gas supply sources. The flow rate is controlled by a unique proportional needle valve with microprocessor control. 【Features】 ■ Capable of pH control in cell culture ■ High-quality laminar flow mass flow sensor with minimal pressure drop ■ All functions can be operated from the front panel ■ Flow rate: 0–500 ml/min or 0–5 L/min ■ Linear error reading: less than ±3% *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "OSK 52MB101" is a peristaltic pump equipped with a plug-in safety power supply. It can use low-cost tubing and does not require a stopper. The pump-flow integrator accurately records the delivered volume. When equipped with an optional external controller, remote control is possible. Please feel free to contact us for inquiries. 【Features】 ■ Set value: 0.01 to 600 ml/hr ■ Remote control (when equipped with optional external controller) ■ Low pulse rate, extending tubing lifespan ■ Plug-in safety power supply ■ Accurate recording of delivered volume ■ Low-cost tubing can be used, no stopper required *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is an automatic Pensky-Martens closed cup flash point tester that complies with ASTM D56, IP 304, and JIS K2265. It features a 6.4-inch high-definition touch panel. It controls rapid heating and cooling performance with a stable electric igniter and predictive heating. Additionally, the software includes functions for printer output and data export in PDF format. Please feel free to contact us if you have any inquiries. 【Features】 ■ Flash point detection system using thermocouples ■ Automation with PC software for easier operation ■ Temperature range: Room temperature to 410℃ ■ Gas or electric ignition ■ Automatic atmospheric pressure compensation *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

The "OSK 44OM402" is an automatic Cleveland open cup flash point tester that complies with ASTM D92 and IP36 standards. It automatically shuts off the gas at the end of the test and detects the flash point and combustion point using an ionization ring. As an option, it can be equipped with a low-volume gas cartridge that can operate in various environments. Please feel free to contact us if you need assistance. 【Specifications (excerpt)】 ■ Test temperature range: Room temperature to 400℃ ■ Data storage capacity: Up to 200 ■ Built-in RS232C output port ■ External dimensions (W×D×H): 320×580×360mm ■ Weight: Approximately 17kg *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This product is used to measure the hydration heat of low-heat Portland cement and hydraulic cement. We offer two types of models: the standard model "62-L0071/A" equipped with a Beckman thermometer, and the digital thermometer type "62-L0071/AD" featuring a high-resolution Pt100 sensor. Please feel free to contact us when you need assistance. 【Overview】 ■ Standard model "62-L0071/A" - Composed of a Dewar bottle stored in an insulated box, a constant-speed electric stirrer, a filter funnel, and a Beckman thermometer with a reading feature. ■ Digital model "62-L0071/AD" - Equipped with a high-resolution battery-operated electronic thermometer with the following features instead of the Beckman thermometer. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

- Large display screen with a clear 3.5-inch LCD. - Measurement modes can be selected from automatic reading and auto hold. - Accurate results can be obtained through automatic/manual temperature compensation. - Up to 200 measurement items can be saved. - The automatic power-off function effectively extends battery operating time. - The reset function allows you to return to the factory default settings at any time. - Body with waterproof and dustproof standard IP65 level. - Supports air-saturated water or zero oxygen calibration. - Manual pressure compensation feature included. - Manual salinity compensation feature included.

• Water quality testing

1. Training with various fire extinguishers is possible according to the fire situation. - Not only powder extinguishers, carbon dioxide extinguishers, and foam extinguishers, but also water extinguishers for training purposes, etc. *For training with water extinguishers, a gas valve opening pedal is used for manual extinguishing. 2. German standard "DIN 14097-2" - There are sales records in France, the UK, Belgium, Greece, and other countries around the world. 3. Installation is as simple as placing the device, and ignition is a one-push button operation! - By adjusting the included regulator, the flame height can be adjusted within 1.8 to 2 meters. - Propane gas (LP gas) 4. High safety - The wired remote control has a cable length of 6 meters, allowing safe operation from a distance. - By attaching the gas valve opening pedal, gas can also be shut off with the foot. - Adopts an underwater burner type. 5. High durability - Adoption of high-grade material [SUS316L] Compared to the commonly used austenitic stainless steel SUS304, it has excellent corrosion resistance and pitting resistance. It is the highest quality stainless steel that is also resistant to rust. - After use, it can be cleaned with a brush or wet cloth. 6. Portability - Comes with two wheels and a handle for easy movement.

• others

- Large display screen with a 3.5-inch LCD for easy viewing. - Measurement mode can be selected from automatic reading or auto-hold. - Accurate results can be obtained with automatic/manual temperature compensation. - Up to 200 measurement items can be saved. - Automatic power-off function effectively extends battery operating time. - Reset function allows you to return to factory default settings at any time. - Body with waterproof and dustproof rating of IP65. - One-point calibration with standard solution and cell constant setting available.

• Water quality testing

1. Training with various fire extinguishers is possible depending on the fire situation. - Not only powder extinguishers, carbon dioxide extinguishers, and foam extinguishers, but also water extinguishers for training purposes. * For training water extinguishers, a gas valve opening pedal is used for manual extinguishing. 2. German standard "DIN 14097-2" - There are sales records in France, the UK, Belgium, Greece, and other countries around the world. 3. Installation is as simple as placing the device, and ignition is a one-push button operation! - By adjusting the included regulator, the flame height can be adjusted between 50 to 80 cm. - Water is not required; propane gas (LP gas) is used. 4. High safety - The wired remote control has a cable length of 6 meters, allowing safe operation from a distance. - By attaching the gas valve opening pedal, gas can also be shut off with the foot. 5. High durability - Adoption of high-grade material 【SUS316L】 Compared to the commonly used austenitic stainless steel SUS304, it excels in corrosion resistance and pitting resistance. It is the highest quality stainless steel that is also resistant to rust. - After use, it can be cleaned with a brush or damp cloth. 6. Portability - It comes with two casters and a handle, making it easy to move.

• others

1. Training with a variety of fire extinguishers is possible depending on the fire situation. - Not only powder extinguishers, carbon dioxide extinguishers, and foam extinguishers, but also water extinguishers for training purposes, etc. *For training water extinguishers, a gas opening pedal is used for manual extinguishing. 2. Complies with the German standard "DIN 14097-2." - There are sales records in France, the UK, Belgium, Greece, and other countries around the world. 3. Installation is as simple as placing the device, and ignition is a one-push button operation! - By adjusting the included regulator, the flame height can be adjusted within 2 to 2.5 meters. - No water is needed; propane gas (LP gas) is used. 4. High safety - The wired remote control has a cable length of 6 meters, allowing safe operation from a distance. - By attaching the gas opening pedal, gas can also be shut off with the foot. 5. High durability - Adoption of high-grade material 【SUS316L】 Compared to the commonly used austenitic stainless steel SUS304, it excels in corrosion resistance and pitting resistance. It is the highest quality stainless steel that is also resistant to rust. - After use, it can be cleaned with a brush or a damp cloth. 6. High reproducibility - It is possible to recreate conditions similar to an actual fire with a powerful flame.

• Other inspection equipment and devices

1. Training with various fire extinguishers is possible according to the fire situation. - Not only powder extinguishers, carbon dioxide extinguishers, and foam extinguishers, but also water extinguishers for training purposes can be used. - For training water extinguishers, a gas opening pedal is used for manual extinguishing. 2. Complies with the German standard "DIN 14097-2". - There are sales records in France, the UK, Belgium, Greece, and other countries around the world. - Currently, there are no standards in Japan that need to be complied with. 3. Installation is as simple as placing the device, and ignition is a one-push button operation. - By adjusting the included regulator, the flame height can be adjusted within 50 to 80 cm. - Water is not required, and propane gas (LP gas) is used. 4. High safety. - The wired remote control has a cable length of 6 meters, allowing safe operation from a distance. - By attaching the gas opening pedal, gas can also be shut off with the foot. 5. Lightweight design. - Made from high-grade material, aluminum 6063 alloy, which is excellent in corrosion resistance and pitting resistance, and is lighter compared to stainless steel. - It is lightweight and easy to carry. - After use, it can be cleaned with a brush or damp cloth.

• Other inspection equipment and devices

Digital technology allows for non-destructive measurement of hardness. Values are displayed on an easy-to-read color LCD screen. Equipped with backlight brightness adjustment and auto power-off function. Can store data for up to 200 entries. Data can be transferred to computer software via USB port. Features voice support function. Calibration is possible with an optional calibration block.

• Other measurement, recording and measuring instruments

- Shape and color sorting allows for the selection of discolored or deformed items, those with mold or cracks, and impurities. - Components from well-known brands such as Osram LED lighting, Nikon cameras, Toshiba CCD sensors, and Qualcomm processors are used. - Equipped with a decaster for easy mobility. - The touch panel uses a Huawei tablet and can be easily replaced. - In addition to small models, there are also large models available. - It is also useful for sorting nuts, legumes, seeds, dried vegetables, plastics, and more.

• Other food machinery

Machine for applying U-shaped or V-shaped notches to samples used in Charpy impact tests. Electric type. Compliant with GB/T229-1994 (ISO148-1998). High precision, long lifespan, low noise. Equipped with lubrication oil circulation function.

• Other processing machines

"Rubber viscosity," "stress relaxation," and "pre-vulcanization characteristics" can be measured. Excellent temperature control function that can shorten "preheat time" and "temperature recovery time." It can automatically calculate data in conjunction with a computer and store data with a large-capacity memory. Compliant with ASTM D1646, ISO 289, JIS K6300, GB/T 1232, DIN 53525, and BS 1673.

• Viscometer