セキュリティハウス List of Products and Services

■Features ●Please use in conjunction with our "Wireless Distribution Outlet." ●Prevents tripping and disconnection caused by cords. ●Includes a "Low Battery Alert Function" to notify you when battery levels are low. ●Includes a "Regular Transmission Function" to check the radio wave reception status.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Temporary Pause Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel secure knowing the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can feel assured knowing the status of the radio wave reach. ● [Temporary Pause Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● The wireless receiver function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensors has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● The wireless receiver function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. Safety Features ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● A wireless receiving function has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call subunit to the sensor has been made wireless, reducing the risk of disconnection due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Battery Low Notification] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Pause Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ● Our various sensors notify you wirelessly in conjunction with the nurse call system. ● Wireless receiving functionality has been integrated into the distribution outlet. ● The wiring from the wall-mounted nurse call sub-unit to the sensor has been made wireless, reducing the risk of disconnection failures due to bed movement. ● The radio wave reach distance is approximately 3 meters in line of sight. ■Safety Features ● [Low Battery Alert] You can know in advance when the transmitter's battery is low. ● [Regular Transmission Function] You can be assured of the radio wave reception status. ● [Temporary Stop Function] Prevents forgetting to turn on the switch, providing peace of mind.

• Other security and surveillance systems

■Features ■Material is made of aluminum alloy. ■The paint color is white.

• Surveillance Cameras

■Features ●Ceiling mount attachment ●Compatible models include the color capsule cameras "VCC-C722," "VCC-C732V," the super day/night capsule camera "VCC-IR982W," and the dummy camera "VCC-D800." ●The installation hole diameter for embedding is the same as before, φ170 to φ176mm.

• Surveillance Cameras

■Features ● Can control the Day-Night preset dome camera PTZ-910AH. ● Up to 255 PTZ-910AH cameras can be controlled with a single controller. ● Camera settings, preset positions, pattern mode, swing mode, and group mode can be set and executed from the controller.

• Surveillance Cameras

■Adoption of EXview HAD CCD® and Digital Processing Method The digital color CCD camera achieves high-quality, high-sensitivity, and low-smear clear images through the adoption of EXView HAD CCD and digital signal processing (DSP). *EXView HAD CCD is a registered trademark of Sony Corporation. ■High-Resolution Camera By adopting a 380,000-pixel EXview CCD, it has achieved a high resolution with a horizontal resolution of 500 lines. ■Auto White Balance Function It is equipped with a white balance function that automatically tracks changes in light sources, consistently reproducing well-balanced images. Additionally, it features a one-push white balance function that allows for manual white balance settings according to the conditions of the monitoring location. ■Flickerless Function It includes a flickerless function that prevents screen flickering under fluorescent lights in areas with a power frequency of 50Hz. ■Backlight Compensation Function It is equipped with a backlight compensation function that automatically brightens the image according to the subject's condition, even in extremely bright backgrounds or backlit situations.

• Surveillance Cameras

■Features By using it in combination with the HDMI conversion converter (VH-RV410), HDMI output signals from devices such as recorders can be converted to HD-SDI signals, allowing for extended wiring distances to display video on multiple monitors located far away. (Up to 70m when using 5C-FB)

• Surveillance Cameras

■Features ● By using this device, you can display the video from a Full HD camera on an HDMI-compatible monitor without using an HD-SDI digital recorder (HDVR-404). ● With the repeater function, you can extend the wiring distance from the camera. (You can connect up to 5 units, but each requires power supply from the included adapter.) ● It supports coaxial power overlay when used in combination with the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), so power supply to this device is not necessary. (You can connect up to 3 units.)

• Surveillance Cameras

■Features ● By using a repeater, the wiring distance from the camera can be extended. ● By connecting a repeater (VH-RV300) to the combination of the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), the wiring distance can be extended.

• Surveillance Cameras

■Features ●This is a dedicated option for EX-SDI and HD-SDI. ●It outputs the same video signal as the input for one input of either EX-SDI or HD-SDI, distributing it to 4 outputs (4-way distribution). ●An AC adapter (DC12V) is included.

• Surveillance Cameras

Features ● Outputs 2 HD-SDI video signals (2-way distribution) from 1 HD-SDI video signal input. ● Comes with an AC adapter (DC12V).

• Surveillance Cameras

■Features ● By using the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), you can transmit power and video signals for HD-SDI cameras with a DC12V power specification using a single coaxial cable. ● By connecting a repeater (VH-RV300), you can extend the wiring distance.

• Surveillance Cameras

■Features ● Infrared lighting turns on when powered by DC12V. ● Can be installed on outdoor or indoor ceilings and walls (IP66 compliant). ● Camera mounting bracket supports 3-axis movement.

• Surveillance Cameras

■Features ● It can connect an analog camera to an HD-SDI digital recorder. ● By connecting an HD-SDI repeater (VH-RV300) or an HDMI conversion converter (VH-AD400), the wiring distance can be extended. *Note: Using this device will not convert it into an analog camera.

• Surveillance Cameras

For more details, please refer to the basic information.

• Other security and surveillance systems

■Detects pressure applied to the mat Place it beside the bed, and when a person gets off (or falls) from the bed, it detects the pressure applied to the detection unit and transmits a low-power radio signal. ■User-friendly design ● The transmitter and detection unit are integrated, making it easy to carry without tangled cords. ● The detection unit size is “400×800mm,” a standard size that is convenient for portability. * A series product "TX-M4512" (detection unit 450×1200mm) is also available. ● By pressing the pause timer switch, you can pause the detection function for 5 minutes. You can extend the timer by reactivating it during this period. Use this feature when you do not want the detection to activate during bed making or medical examinations. ● When the battery is low, the indicator light will blink, and a low battery signal will be transmitted to notify you. ● The detection unit is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. ● The underside is made of non-slip material to prevent slipping from the floor. ● It has a simple waterproof structure.

• Other security and surveillance systems

■Detects pressure on the mat By placing it at the bedside or the entrance of a room, it is a sensor that detects a person's weight when they get off (fall) from the bed or attempt to leave the room. ■Features ● The transmitter and detection unit are integrated, making it easy to carry without tangling wires. ● The detection unit size is a large "450×1200mm," effective in wide entrance areas. * A series product "TX-M48" (detection unit 400×800mm) is also available. ● Pressing the pause timer switch allows you to pause the detection function for 5 minutes. You can extend the timer by reactivating it midway. Use this feature when you do not want the detection to operate, such as during bed making or medical examinations. ● When the battery is low, it will notify you with a blinking indicator light and send a low battery signal. ● The detection unit is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. ● The underside uses non-slip material to prevent slipping from the floor. ● It has a simple waterproof structure.

• Other security and surveillance systems

■Features ● By registering with the multifunctional emergency notification device [HEC-610], it can be used as a "talking wireless push button." (Maximum number of devices that can be registered: 8) By installing it in places where accidents are likely to occur, such as beside the bed, in the toilet, or in the changing room, you can press the button in case of an emergency to make an emergency call. After the call is answered, hands-free communication is possible. *Note: It does not have waterproof functionality. ● The radio range is approximately 20 meters in line of sight. ● The large button makes it easy for the elderly to operate. ● It has a built-in battery to ensure functionality during power outages or temporary power disconnections. (Continuous talk time during power outages: up to 5 hours) *Note: To operate the notification function during a power outage, the main unit must also be equipped with a backup battery. (Continuous talk time for the main unit during a power outage is approximately 2 hours.)

• Other security and surveillance systems

■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can reach up to 6.5 meters, achieving a wide detection area. (Optical area: Height 6.5m × Width 6.9m × Depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By combining the new insect mode and environmental countermeasures function, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (part number WD-6500), a detection area setting for the shutterway (negative side) can be established, enhancing safety.

• Safety Sensors

■Features ●This is a part that distributes one system of powered input to two systems of unpowered relay contact outputs. ●Unpowered relay contacts (c contacts × 2) ●Can be housed in controllers of C-603 or higher. ●10 pieces per box

• Other security and surveillance systems

For more details, please refer to the basic information.

• Surveillance Cameras

■2-System Output It has a built-in output for two systems, and operates by verifying individual PIN codes, allowing this single unit to perform two types of controls such as setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ 4 Patterns of Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for about 1 second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Output Mode A mode where both outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested due to threats, an alarm will be output to security panels as the unlocking output operates. * When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring pranks and intruders.

• Safety switch

For more details, please refer to the basic information.

• Other security and surveillance systems

■Features ● The user can start the living timer countdown by pressing the safety switch. If there is no switch operation within the set time, it will be judged as an anomaly and will output an alert. ● The setting time for the living timer can be selected from 15 patterns. ● The operating status is indicated by two colored display lights: red and green. ● The alert delay function (pre-notification function) notifies with display lights and a buzzer. ● It can be freely installed in various locations such as living rooms, changing rooms, pharmaceutical storage, and freezers (single-person workspaces). ● There are no false activations due to the installation environment, as it does not connect to a motion sensor.

• Other security and surveillance systems

■Features ●Radio wave reach distance: approximately 100m in line of sight ●One transmitter can control the "open, stop, close" three outputs of up to 99 registered receivers. ●Operation method: Channels can be switched using the "forward" and "backward" button operations. After selecting the channel of the receiver you want to operate, use the "open, stop, close" buttons to control it. ●Ideal for wireless control in factories where individual operation of multiple electric shutters is desired. ●Equipped with a safety lock switch on the side of the transmitter to prevent accidental operation. ●Up to 124 transmitters with different ID codes can be registered to the receiver.

• Safety Sensors

For more details, please refer to the basic information.

• Other security and surveillance systems

Features ● Can split one RCA jack into two. It allows one input to be expanded into two inputs. (Usage example) Using a mat sensor and a push button together. ● Applicable products: BC series, HC-116

• Other security and surveillance systems

■Main Features ● This is a compact dedicated DC power supply unit with an input of AC100V/200V and an output of DC24V 450mA. ● Its space-saving design (W76xH32xD28mm) makes it ideal for use in peripheral devices for automatic doors and security system equipment.

• Other power sources

■Features ● By combining sensor signals and programming, it is possible to build a system using only this product without the need for multiple units for direction detection and contact distribution. (Programming costs are estimated separately) ● Power supply voltage: AC100V or DC24V ● Input: 6 points of no-voltage contacts, Output: 4 points of no-voltage contacts (2 points are common COM) ● Power supply for sensors: DC24V 500mA (when supplied with AC100V) ● It is possible to reuse PLC programs created in the past.

• Other security and surveillance systems

■Triple mirror that forms a unique area Equipped with three sets of optical units within the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique arrangement design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to change the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by attaching a bird stopper to the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Compatible with installation heights of 2.0 to 6.0m! Since it can be installed at heights that are not easily reachable by people, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors With a seamless high-density surveillance area, it enables comprehensive monitoring without gaps.

• Other security and surveillance systems

■Triple mirror that forms a unique area Equipped with three sets of optical units within the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles outdoor lighting, and the internal mirrors can be adjusted to modify the area, making it difficult to infer the direction of the area from its appearance, thus enhancing security. ■Reduction of false alarms caused by small animals By adopting independent detection units for each mirror, signal processing reduces false alarms caused by small animals such as cats. Furthermore, by attaching a bird stopper to the top surface, it becomes difficult for birds to perch, significantly reducing unexpected false alarms. ■Supports installation heights of 2.0 to 6.0m! Since it can be installed at heights that are difficult for people to reach, it prevents vandalism against the sensor. Additionally, by using high-density mode, it can be installed at heights of up to 6m. (In high-density mode, cancellation of small animals is disabled.) ■High-density area using triple mirrors Due to the seamless high-density surveillance area, it allows for comprehensive monitoring without gaps.

• Other security and surveillance systems

■Light and Sound Deterrent This is an outdoor deterrent device that combines high-brightness LEDs and an electronic siren with an infrared sensor. ■External Alarm/Disarm Control via Control Input With control input, it is possible to link the controller's alarm/disarm function to operate the deterrent only while in alarm mode. The control input can switch between a contact A and contact B. *Regardless of the state of the deterrent control input, alarm output will occur. ■Two Models Available: Electronic Siren Type and Recording Type - PBS-20T/PBS-20TA (Siren Type) Emits alarm sound with an electronic siren, maximum volume of approximately 90dB. - PBV-15T/PBV-20TA (Speaker Type) Emits messages using recorded voice synthesis. Can record up to 16 seconds, maximum volume of approximately 80dB. ■Day/Night Discrimination Function The alarm sound can be set to operate during the day, only at night, only during the day, or not at all, thanks to the day/night discrimination function. *Regardless of the setting, alarm output will occur. - PBS-20T/PBS-20TA (Siren Type) Sound duration can be selected for 5 seconds or 20 seconds. *When used in conjunction with control input, the control input takes priority.

• Other security and surveillance systems

■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched among four levels, preventing infrared wrapping and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched between two levels, allowing for efficient settings according to the surveillance distance. ■Auto Gain Lock Function Within the maximum surveillance distance, it automatically sets the optimal sensitivity margin for any surveillance distance. ■External Environment Diagnosis Function If the light reception level decreases due to weather changes such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during adverse weather conditions like dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.

• Other security and surveillance systems

■Adoption of Fuzzy Theory The two outputs from the dual twin sensor are processed by a newly developed CPU, separating the temperature difference information between the detection object and the background, as well as the size information of the detection object. Using fuzzy theory, it makes a highly accurate judgment on whether the detection object is a human or a small animal, and outputs an alarm. ■Compact and High Performance A compact and soft design that matches well with interior decor. With a newly designed high-sensitivity dual twin sensor, optical system, and signal processing circuit, it has achieved an even denser surveillance area. ■Micro-Movement Detection Function By switching the mode selector, the dual twin sensor operates as two independent twin sensors. The number of sensitive zones doubles (from 18 pairs to 36 pairs), transforming it into a highly sensitive micro-movement detection sensor that can detect even slight movements of the human body or limbs. ■Abnormality Display Function Alarm Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during surveillance through the blinking or lighting of the memory display lamp (yellow). ■Abnormality Alarm Function It notifies of abnormalities through continuous alarm output and continuous lighting of the alarm display lamp.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Features ● Ideal as a presence display unit for conference rooms and reception areas, as well as a control unit for various lighting fixtures. ● The connected sensors are not limited to passive sensors or infrared sensors, as long as they are one-shot output types, allowing for selection of models that match the detection area. ● Compact and lightweight design.

• Other security and surveillance systems

■Features By installing a transmitter on the network camera side and a receiver on the network recorder side, the wiring distance can be extended. ◆When using PoE power supply The wiring distance between one network camera (900HD series) and the network recorder (HNVR-401/801/1601) can be extended up to 200m. *Not compatible with N-PTZ910HD/930HD ◆When not using PoE power supply (installing multiple cameras on the transmitter side and wiring between the transmitter and receiver with one LAN cable) HNVR-401/801... Up to 600m for 2 cameras, up to 400m for 3 cameras. HNVR-1601... Up to 600m for 4 cameras, up to 400m for 6 cameras. *HNVR401/801 can connect a maximum of 3 cameras, and HNVR1601 can connect a maximum of 6 cameras. *Not compatible with N-PTZ910HD/930HD.

• Surveillance Cameras

■Features ● This is a power supply and extension unit for 1 channel of PoE/PoE+ compatible network cameras. (Can be used as a power supply for PTZ network cameras) ● PoE output power can supply up to 30W. ● Wiring distance can be extended up to 100m. Camera - 100m - NH-PUE220 – 100m – NVR ● Equipped with an operation indicator light. (On when powered, off when not powered) *Please use a LAN cable of category 5e (Cat5e) or higher for connection.

• Surveillance Cameras