セキュリティハウス List of Products and Services

For more details, please refer to the basic information.

• Entrance and exit control system

■Achieves a maximum installation height of 4m without a target Even with high doors of 4.0m, it is possible to create an open entrance while maintaining safety with the doorway monitoring function. It can also accommodate entrances to industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors due to rushing into the entrance or diagonal entry. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with 7-color LED In detection range confirmation mode, the color of the displayed LED changes for each detection row, allowing for area measurement and identification of rows experiencing malfunctions. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment is possible for each row in width and depth, allowing for precise detection areas tailored to the site while maintaining high density.

• Safety Sensors

■Features ● Can be used for unlocking electric locks. ● Ceiling-mounted light sensor. ● Almost unaffected by indoor wind, sound, or temperature changes. ● Equipped with a self-diagnosis function to determine abnormalities in the sensor itself. ● A high-density area arranged in 4 rows with 6 detection patterns per row.

• Safety Sensors

■High-Density Infrared Area The detection area has achieved a high-density wide area with 72 spots. ■Adjustable Area Both the stepping and wide areas can be erased one row at a time, allowing for optimal fine area adjustments. ■Mode Switching Function The eco mode function reduces unnecessary opening time of automatic doors. ■Operation Confirmation Function The use of full-color LEDs makes operation confirmation easy. ■Easy Installation The industry's first pull-down method has achieved a flat, cohesive design that preserves the aesthetics of the ceiling. It has realized a flattening of approximately 10mm compared to conventional products.

• Safety Sensors

■Features ● There are no movable parts, so there is less performance degradation due to wear and aging, resulting in high reliability. ● The suction power is 272 kgf, providing a level of security comparable to that of a standard door lock. ● It is completely waterproof, making it usable outdoors. (※Only M32M(J)) ※ Please choose from three control panel models: DM-700, DM-110K, and DM-110TK. 　(DM-110TK requires the dedicated operation unit ACS-11T.)

• Entrance and exit control system

■Features ● There are no moving parts, so there is less performance degradation due to wear and aging, resulting in high reliability. ● The suction power is 272 kgf, providing a level of security comparable to that of a standard door lock. * Please choose from three control panel models: DM-700, DM-110K, and DM-110TK. (DM-110TK requires a dedicated operation unit, ACS-11T.)

• Entrance and exit control system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance and exit control system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected per electric lock (electric strike). ● Can control electric locks via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with a JEM-A terminal for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance and exit control system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance and exit control system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks integrated with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance and exit control system

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

• Entrance and exit control system

■Power Outage Compensation The external power supply is DC12V500mA with ample capacity, and it has a built-in power outage compensation circuit that lasts approximately 30 minutes, allowing for the connection of a numeric keypad, card switch, and even fingerprint verification switch. ■Compact Adapter with Two-Wire System The main electrical control panel is connected to the included two-wire electric key adapter using CPEVφ0.9-1P or AEφ0.9-2C. ■Control Output is Voltage-Free Relay Contact Output State outputs for door opening, unlocking, and temporary unlocking are provided via voltage-free relay contacts. It can be directly connected to security transmitters or automatic reporting devices. ■Abnormalities in Electric Lock Indicated by Alarm If the door is left open abnormally for a set time, or if there are issues such as forced entry or disconnection in the electric lock, it will be indicated by an LED and alarm buzzer (volume adjustable), and the alarm output (voltage-free relay contact) will also be activated. ■Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices such as SSP-C1D and SSP-C1E can also be connected.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Three Operation Modes ● You can choose from three operation modes: "Automatic Locking Mode," "Repeated Locking/Unlocking Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the panel lock function can disable unlocking operations using the buttons on the main panel. ■ Fire Alarm Link Function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locks automatically when the fire alarm is restored.) ■ Supports Long-Distance Wiring Regardless of the type of electric lock, wiring is possible up to 150m (φ0.9mm-3P). (When the device is powered by AC100V.) ■ Standard Equipped with Unlocking Prohibition Input An additional contact signal input is provided to disable the panel's unlocking button and external inputs. This allows you to prohibit unlocking operations in conjunction with security signals or tamper signal inputs. (Unlocking via fire alarm input takes precedence even during the prohibition of unlocking.) ■ Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices: SSP-C1D, SSP-C1E, etc., can also be connected.

• Entrance and exit control system

Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 3 keys per set Loop indicator light and buzzer for abnormality confirmation Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities through loop input. It also has a spare light input, allowing for use according to the system. Large contact type It has a non-voltage contact that can control up to AC100V and 10A (resistive load), making it suitable for applications such as security lighting control and AC100V management ON/OFF switches. By supplying AC100V power, an indicator light that shows the ON/OFF status can be used. Wiring distance The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m *Please connect the contact output to the key switch input terminal of our controller.

• Entrance and exit control system

■ Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: a set of 3. ■ Key switch adopting a 3-way method convenient for remote operation It employs a 3-way method that allows for setting/resetting the alarm from both the key switch side and the controller side, making remote operation convenient. ■ Loop indicator light and buzzer for checking the presence of abnormalities Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities through loop input. Additionally, it has a spare light input, allowing for use according to the system. ■ Wiring distance capability The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m * Please connect the contact output to the key switch input terminal of our controller.

• Entrance and exit control system

■Easy Wiring Wiring from the controller to the operation unit, electric lock, and operation display is simple, requiring only two wires connected in a non-polarized manner. Additionally, the keypad, which is often installed outdoors, is designed to be JIS rainproof. ■Scramble LCD Key Method with Changing Number Sequence The position of the numbers changes with each operation, making it difficult to detect the PIN. This scramble-type LCD key is self-illuminating, ensuring reliable operation even in dark environments. ■Setting and Changing the PIN via LCD Screen and Setting Button The setting and changing of the PIN is done through the LCD screen and setting button on the controller. The PIN can be registered with a maximum of 8 different 4-digit combinations. ■Clear Icon Display for Operational Status The icon display on the controller's LCD screen and error codes allow users to check the status of the electric lock and door, as well as the type of error that occurs in case of a malfunction. ■Alarm Buzzer Effective Against Tampering and Unauthorized Entry If the keypad is unnecessarily pressed four times, an alarm buzzer will sound, preventing tampering and unauthorized entry. Additionally, the design allows for partial disarmament of security devices in case of emergencies.

• Entrance and exit control system

■Easy Wiring Wiring from the controller to the operation unit, electric lock, and operation display is simple, requiring only two wires connected in a non-polarized manner. Additionally, the keypad, which is often installed outdoors, is designed to be JIS rainproof. ■Scramble LCD Key Method with Changing Number Sequence The positions of the numbers change with each operation, making it difficult to detect the PIN. This scramble-type LCD key is self-illuminating, allowing for reliable operation even in dark environments. ■PIN Setting and Change Registered via LCD Screen and Setting Button The setting and changing of the PIN is done through the LCD screen and setting button on the controller. The PIN can be registered with a maximum of 8 different 4-digit combinations. ■Clear Icon Display for Operational Status The icon display on the controller's LCD screen and error codes allow users to check the status of the electric lock and door, as well as the types of errors that occur during troubleshooting. ■Alarm Buzzer Effective Against Mischief and Illegal Intrusion If the keypad is unnecessarily pressed four times in succession, an alarm buzzer will sound, preventing mischief and illegal entry. Additionally, the design allows for partial disarming of security devices in case of emergencies.

• Entrance and exit control system

■Features ● It is IP65 (splash-proof), so it can be installed without a rainproof box. ● The characters on the metal keypad are backlit and illuminated, ensuring good visibility at night and preventing wear on the characters. ● It has two output systems in one unit, allowing for applications such as electric lock control and security (dual route) control. ● Up to 500 different passwords can be set. (Initial value: 4 digits / Maximum: 8 digits) ● It has a built-in heater, making it suitable for installation in cold regions.

• Entrance and exit control system

■Output of System 2 It is equipped with an output for System 2 and operates by verifying individual PIN codes, allowing this single unit to perform two types of control: setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for about one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Output Mode A mode where both outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested under duress, an alarm will be output to the security panel as the unlocking output is activated. *When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." ■Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring pranks and intruders.

• Entrance and exit control system

■ Capable of output for security and electric lock (2 systems) It has two outputs in one unit, allowing it to replace two units in locations where previously two were needed. It can operate solely for security or solely for electric lock as well. *Note: During security set, there will be no output for unlocking the electric lock. ■ Up to 3 types of passwords can be registered You can register up to 3 types of passwords ranging from 1 to 8 digits. Additionally, you can specify the operational range based on the password, allowing for user-specific operations. [Operational Range] 1. Only set/reset can be controlled 2. Only unlocking output for electric lock can be controlled 3. Both set/reset and unlocking output for electric lock can be controlled ■ Three operation modes available You can choose from three different operation modes with varying output forms, making it suitable for a wide range of applications. Latch Mode: A mode that switches between set and reset with each password input. One-Shot Mode: When in the 'normal' loop state, a password input can set for either 1 second or 5 seconds. Three-Way Remote Switch Mode: A mode for three-way output used in combination with our controller.

• Entrance and exit control system

■Basic design of the operation unit considering usability ● The position of the displayed numbers in the "operation unit" changes with each verification. (Fixed display is possible) ● Special film is used to prevent peeking from the side. ● Up to three types of PIN codes with 1 to 8 digits can be registered. ● The numeric keypad can be connected to one electric lock control panel with up to two units inside and outside. ■Three operating modes of the electric lock control panel ● The operating modes can be selected from "Automatic Locking Mode," "Repetitive Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the unlocking operation using the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm linkage function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard equipment for unlocking prohibition input An additional contact signal input is provided to disable the unlocking buttons on the panel and external inputs. Unlocking operations can be prohibited in conjunction with security signals and tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

• Entrance and exit control system

■Basic design of the operation panel considering usability ●The "operation panel" changes the position of the displayed numbers each time it is verified. (Fixed display is possible) ●Adoption of special film prevents peeking from the side. ●You can register up to three types of PIN codes consisting of 1 to 8 digits. ●The numeric keypad can be connected to one electric lock control panel with up to two units inside and outside. ■Three operating modes of the electric lock control panel ●You can choose from three operating modes: "Automatic Locking Mode," "Repeating Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ●In "Automatic Locking Mode," the unlocking operation via the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm interlock function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard feature of unlocking prohibition input An additional contact signal input to disable the unlocking buttons on the panel and external inputs is included. Unlocking operations can be prohibited in conjunction with security signals or tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

• Entrance and exit control system

■ Capable of output for security and electric lock (2 systems) Equipped with two output systems in one unit, allowing for security set/reset and electric lock unlocking operations to be handled by a single device. ■ Supports embedded and surface-mounted installation With a slim design, it can be embedded in a two-gang switch box or installed on the surface using the included exposed box. (Thickness when mounted on the wall: Embedded: 18.5mm, Surface-mounted: 35mm) ■ Supports 3-mode multi-functionality Compatible with FeliCa/Mifare/I-CODE multi-read. Can operate in a mixed environment. ■ Built-in voice announcement function Includes an announcement function that guides users through operation content and control status via voice, helping to prevent operational errors. ■ Three patterns of verification methods to choose from Verification methods can be selected from "Card" only, "PIN" only, or "Card + PIN," allowing for mixed verification methods. (Registered PIN length: 1 to 8 digits) ■ Up to 1000 entries can be registered A maximum of 1000 entries can be registered in total for "Card," "PIN," and "Card + PIN."

• Entrance and exit control system

■AND authentication with card and keypad It allows authentication of ID cards or PIN codes only when facial recognition is successful, in conjunction with remote switches (ACS series) and the access control management system ACsmart. ■Recommended registration limit of 100 people Registration and operation are recommended for up to 100 people (with 3 to a maximum of 10 facial images registered per person). ■Easy registration via computer Facial registration can be easily done by connecting the main unit to a computer via USB and using the included software. ■Measures to prevent impersonation It can be proposed as a countermeasure against unauthorized use of cards in case of theft or loss of ID cards. By adding facial recognition to ID card authentication, it helps prevent impersonation.

• Entrance and exit control system

■Features ●This product is a "security alarm" that detects intruders' movements with its built-in sensor and issues a warning with the barking sound of a shepherd dog in response to the movement. ●Since it uses radar, it can detect moving objects beyond specific obstacles. ●It has radar detection sensitivity adjustment and volume adjustment functions, allowing it to detect intruders up to 6 meters away. ●It can be easily moved, making it suitable for a wide range of applications, including homes, offices, and warehouses. ●In addition to the barking sound of a dog, it also offers options for forest melodies and visitor notifications.

• Other security and surveillance systems

■Features ● Lightweight and compact, making it easy to install anywhere. ● Detects water leaks using electrodes located at the bottom of the case (two in the main sensor section and two in the point sensor section), and notifies with an alarm sound and flashing indicator light. ● Battery-operated and does not require wiring, allowing it to be placed directly in the area of concern, such as on the floor. ● Capable of detecting leaks at two locations: the main unit and the included point sensor, enabling monitoring of leaks in both the main unit and a separate, distant location (cable length between main unit and point sensor is 3.5m). ● The point sensor can be installed in concealed areas (such as inside ceilings or under floors), while the main unit can be placed in an easily accessible location for maintenance (near inspection openings or above the floor). ● Waterproof construction ensures it will not malfunction even if submerged. ● Comes with height adjustment screws for stable installation depending on the location. *Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected.* 〈Usage Precautions〉 The battery life is an estimate based on operation at room temperature and is not guaranteed.

• Other security and surveillance systems

■Features ● Lightweight and compact, making it easy to install anywhere. ● Detects water leakage with two electrodes located at the bottom of the case, alerting with a buzzer sound and flashing indicator light. ● Battery-operated and does not require wiring, allowing for simple placement on the floor. ● Waterproof design ensures it will not malfunction even if submerged. ● Equipped with an adjustable screw for stable installation depending on the situation. *Please note that it cannot detect water with extremely low impurities, such as pure water or ultrapure water.* 〈Usage Precautions〉 The battery life is a guideline for operation at room temperature and is not guaranteed. The battery included with this product is a test battery, and it may expire before reaching the specified usage time. Please replace the test battery with a new one as soon as possible.

• Other security and surveillance systems

■Features ● Its low-cost and compact design allows for easy installation in areas where water leakage is a concern. ● With a long battery life of approximately 5 years (※1) and the option for battery replacement, it can be used not only for checking water-related facilities during new construction but also for permanent operation. ● The alarm will sound continuously for up to 24 hours while detecting water leakage. (※2) 　※1. This refers to the battery life in standby mode. It is a guideline for operation at room temperature and is not a guaranteed value. 　※2. This applies when using a new battery. 　※ Please note that water with extremely low impurities, such as pure water or ultra-pure water, cannot be detected.

• Other security and surveillance systems

■Features ● When an intruder is detected, it issues a loud alarm at 90dB to deter them. ● The set/unset configuration can be done with any 1 to 8 digit PIN code. ● It has output terminals, allowing for easy expansion by connecting chimes or sirens, or integrating with wireless devices and reporting systems for notifications at a distance. ● Can be used as a tabletop unit or mounted on a wall. ● Includes a feature to notify when the battery needs to be replaced.

• Other security and surveillance systems

■Features ● This product is only the lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Other security and surveillance systems

■Features ● This product is only a lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Other security and surveillance systems

■Features ● This product is only the lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Other security and surveillance systems

■Features ● This product is only the lamp holder (bulb sold separately) ● Excellent rain resistance and durability ● Suitable for single switch boxes ● Compatible with E26 base bulbs

• Other security and surveillance systems

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular motion and sound sensor switch MS series for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Other security and surveillance systems

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular MS series motion and sound sensor switches for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Other security and surveillance systems

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is ideal for exterior use due to its excellent rain resistance and durability. ● It is compatible with single switch boxes. ● Please connect it to the popular motion and sound sensor switch MS series for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Other security and surveillance systems

■Features ● It can be installed on various surfaces such as ceilings, walls, poles, and vises (with a wide range of options available). ● It is highly resistant to rain and durable, making it ideal for exterior use. ● It is compatible with single switch boxes. ● Please connect it to the popular motion and sound sensor switch MS series for use as an automatic lighting device. Additionally, it can be used alone as a deterrent security light.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems