セキュリティハウス Product Lineup

■Miniaturization of the receiver By miniaturizing, we can utilize the limited space within the automatic door engine more effectively. ■Interference prevention feature Using the 2.4GHz frequency band, we send signals from 3 channels in sequence to ensure reliability and prevent interference.

• Safety Sensors

■Miniaturization of the receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Miniaturization of the transmitter Due to its thinness, there are fewer constraints on installation locations. ■Clarification of the operation indicator light The operation indicator light on the transmitter (DAW-100) has been made brighter than previous models, making it easier to confirm operation. ■Interference prevention feature Using a frequency in the 2.4GHz band, we send 3 channels of signals in sequence to ensure reliability and prevent interference. ■Improvement of operability ● Added a hand mark to the operation section, clarifying the position for operation in the panel design. ● Enhanced the click sensation felt by the hand when touched.

• Safety Sensors

■Miniaturization of the receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Miniaturization of the transmitter Due to its thinness, there are fewer constraints on installation locations. ■Clarification of the operation indicator light The operation indicator light is brighter than conventional models, making it easier to confirm operation. ■Interference prevention feature Using the 2.4GHz frequency band, signals from 3 channels are sent in sequence to ensure reliability and prevent interference. ■Improvement of operability ● Added a hand mark to the operation section to clarify the position for operation in the panel design. ● Enhanced the click sensation felt by the hand during touch.

• Safety switch

■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate malfunctions. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for automatic door activation. *If there are uneven walls in the surrounding installation environment, reflections from the walls may occur, which can reduce sensitivity, so please be mindful of the environment.

• Safety Sensors

■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for automatic door activation. *Be cautious of the installation environment, as irregular walls may cause reflections that can reduce sensitivity.

• Safety Sensors

■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or an automatic door activation sensor. *Be cautious of the installation environment; if there are uneven walls nearby, reflections from the walls may occur, potentially reducing sensitivity.

• Safety Sensors

■Features ● This safety sensor is ideal for ensuring safety at circular doors due to its three-dimensional area. ● The microcontroller automatically determines the surrounding environment and the sensor installation height through initial settings, establishing a stable area. ● Radio waves, wind, external noise, and temperature changes are all controlled by the microcontroller for optimal operation at all times. * Please note that the monitoring operation starts with an external activation input (non-voltage contact), so it cannot be used as a security sensor or an automatic door activation sensor. * If there are uneven walls or similar features in the installation environment, reflections from the walls may occur, potentially reducing sensitivity.

• Safety Sensors

■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.

• Safety Sensors

■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.

• Safety Sensors

■Hygienic Non-Contact Method Ideal for facilities that require special attention to hygiene, such as food factories, pharmaceutical factories, and hospitals, as it outputs signals without touching the switch. It is particularly suitable for places like food processing plants and hospitals where hygiene is a concern. ●Compatible with single-unit embedded switch boxes *HACCP Compliant The main body cover is made of stainless steel and designed to minimize dust accumulation. *HACCP: An international standard that defines the requirements of a food safety management system. ■Waterproof Structure It has an IPX3 equivalent structure, ensuring that water splashed during cleaning in food factories does not affect the main body. ■Built-in Sensitivity Volume Can be set to the optimal distance according to the detection range (0 to 200mm). ■Integrated Controller The controller function is built-in, making installation simple.

• Safety Sensors

■Features ● It outputs signals by waving your hand without touching the main unit, making it ideal for hygienic environments such as food and pharmaceutical factories and hospitals. ● The angle of the beam switch can be adjusted not only to face forward and downward but also to the left and right. ● The main unit is white, giving it a clean appearance, and the arrow mark clearly indicates where to wave your hand. ● The IP55 design ensures waterproof and dustproof construction. ● It can be mounted on a single switch box (pitch 72.5–83.5mm). ■ Three patterns for the angle of the beam switch: front, downward, and left/right The position of the traditionally fixed beam switch can be changed. ■ White base color enhances cleanliness The main unit is white, enhancing cleanliness and blending well in any environment. ■ The area to wave your hand is prominent The arrow mark makes it easy to identify where to wave your hand.

• Safety Sensors

■Operating Principle The infrared light, modulated by the light-emitting sensor, is continuously emitted, and the light-receiving sensor captures the weak infrared light that reflects off objects. The controller amplifies this input signal and performs synchronous detection to monitor the presence of reflecting objects. ■Main Features ● The angle of the sensor body can be adjusted arbitrarily, allowing for a preferred reflection area. ● The door remains open while receiving reflected infrared light, ensuring safety. ● The light-emitting and light-receiving sensors are integrated, making wiring simple. ● It operates stably without being affected by disturbances from sunlight or lighting.

• Safety Sensors

■Usable ambient temperature supports down to -25℃ This is a control panel for an infrared beam switch with a heater, which can be used as a supplementary light beam to prevent pinching in automatic doors and shutters in cold regions and cold storage. ■Heater-equipped sensor unit The waterproof heater-equipped sensor unit reduces malfunctions caused by condensation or fogging in cold storage, as well as ice formation and snow accumulation in cold regions. ■Power supply voltage supports a wide range The power supply voltage supports a wide range from AC100 to 200V. ■Detection distance The detection distance is up to 10m. ■User-friendly design ● By adding the optional sensor unit BS-10NH, it can support two light axes. ● The wiring code for the light-emitting side is 15m, and the wiring code for the receiver is 10m, allowing the sensor connection code to be cut to fit the installation environment. *The sensor unit is sold separately.

• Safety Sensors

■Features This unit is a sensor unit with a heater-equipped infrared beam switch that can control the movement of a sheet shutter (1 beam opposing type, 10m). By combining it with the separately sold heater-equipped infrared beam switch controller DS-HC, control of the sheet shutter becomes possible. By installing the sensor part near the sheet shutter, it can detect and output the stopping or passing of people and vehicles. Additionally, since it has a built-in heater, it can reduce malfunctions caused by condensation, freezing, or snow accumulation.

• Safety Sensors

■Features This device is a controller that can control the movement of a sheet shutter. When combined with the separately sold heater-equipped infrared beam switch sensor unit BS-10NH (up to 2 beams), it enables control of the sheet shutter. By installing the sensor unit near the sheet shutter, it can detect and output when a person stops or passes through the opening and closing area. Additionally, the sensor unit has a built-in heater that reduces malfunctions caused by condensation, freezing, or snow accumulation. When using 2 beams, the adoption of a scanning method prevents mutual interference between the two beams.

• Safety Sensors

■Features ● Reduces malfunctions caused by "condensation or fogging in low-temperature warehouses or freezing warehouses" or "freezing or snow accumulation in cold regions." ● The sensor head is waterproof, allowing installation in places prone to condensation, such as low-temperature warehouses, freezing warehouses, or semi-outdoor areas. ● The design minimizes heat transfer from the heater to the sensor mounting plate. ● Detection range of up to 10 meters. ● High-reliability design that is hardly affected by external light interference, such as sunlight. ● Equipped with an operation indicator light for convenient operation confirmation (green LED: always on, turns off during detection). ● Compact controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside door engines. ● Connection cables for both the light-emitting and light-receiving parts can be freely cut according to installation conditions. ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance.

• Safety Sensors

For more details, please refer to the basic information.

• Safety Sensors

■Features This device is a controller that can control the movement of automatic doors. By combining it with the separately sold sensor unit BS-6N, it becomes possible to control the automatic door. By installing the sensor unit near the automatic door, it can detect and output when a person stops or passes through the opening and closing area. Additionally, it is equipped with two types of outputs: contact output and counter output, allowing it to interact with external devices such as visitor counters.

• Safety Sensors

■Two power sources for different applications You can choose from two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, since the connection cables are joined by connectors, threading them has become easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● Highly reliable design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator lamp that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Safety Sensors

■Two power sources according to usage You can choose from two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function to prevent light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: always on, turns off when detecting)

• Safety Sensors

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Safety Sensors

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Safety Sensors

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the emitting and receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if necessary. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Safety Sensors

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It does not restrict installation locations even within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to use it as a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method eliminates mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Safety Sensors

■Realization of a compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Furthermore, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Safety Sensors

■Realization of compact controller This is a small controller with dimensions W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)

• Safety Sensors

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and, if necessary, the addition of sensor heads to use it as a double beam. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Safety Sensors

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as was done traditionally. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method With the adoption of the scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to swap the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Safety Sensors

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It does not limit the installation location within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method eliminates mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Safety Sensors

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It does not require a specific installation location within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving sections can have their connection cables freely cut, eliminating the need to bundle them inside the door engine. ■Can also be used as a single beam It can be used as a single beam initially, and if needed, it can be upgraded to a double beam by adding a sensor head. ■Adoption of scanning method The adoption of a scanning method eliminates mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Safety Sensors

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●Highly reliable design that is hardly affected by external light interference such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Safety Sensors

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that allows for optimal sensitivity adjustment according to the installation distance. ■User-friendly design ●Highly reliable design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Safety Sensors

■Realization of a compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Safety Sensors

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)

• Safety Sensors

■Output Assurance Equipped with both microwave and infrared sensor outputs, it can be used for various applications. "Output 1 is a relay output" and "Output 2 is an open collector output." ■Features of Microwave It is less affected by snow and rain, making it suitable for outdoor locations. ■Mode Switching Function The comprehensive output (Output 1) can switch modes. 1) Microwave or Infrared 2) Microwave only *The output from the infrared sensor section is available independently (Output 2). ■Direction Discrimination Function It can detect movements towards the sensor while ignoring movements away from it. ■Infrared Area There are 32 detection spots: 12 (1st row) + 12 (2nd row) + 8 (3rd row). (Depth 1.25m × Width 3.2m at 3.2m) ■Microwave Area A wide area of 2.5m × 4.0m at a height of 2.2m is secured.

• Other security and surveillance systems

■Direction Detection Function ● It is an optimal direction detection sensor using microwaves for activating vehicle exit warning lights. ● It can also detect the direction of pedestrians, allowing for applications such as detecting only entrants to trigger camera recording. ■Convenient One-Sided Wiring ● By installing just one unit on one side, it can effectively determine the direction of vehicles, making installation easy. ■Rainproof Structure ● It has a rainproof design, allowing for outdoor use as is (caulking material is required for the wiring hole). * There may be false triggers during heavy rainfall. * It is recommended for use in environments where vehicles pass through in a straight line. * If there is a tendency for vehicles to approach the sensor from a distance, false detection may occur.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Safety Sensors

For more details, please refer to the basic information.

• Safety Sensors

For more details, please refer to the basic information.

• Safety Sensors

For more details, please refer to the basic information.

• Safety Sensors

For more details, please refer to the basic information.

• Safety Sensors

■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it is ideal as a sensor for large factory doors and sheet shutters, allowing for long-distance detection. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door or people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle Thanks to the swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.

• Safety Sensors

■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can reach up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. Non-detection of lateral entry 3. Non-detection of exit from the shutter side 4. Non-detection of exit from both lateral and shutter sides ■Malfunction reduction function By using the new insect mode in conjunction with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, or insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutterway can be established, enhancing safety. ■Detection area setting function The depth area can be set from 5 columns to 1 column, and the width area can be independently adjusted left and right, allowing for the deletion of detection areas in the outer two spots, enabling detailed area settings tailored to the site.

• Safety Sensors

- Compatible with installation heights of 2 to 4.7 meters and equipped with shutterway monitoring function. It supports installation heights from 2.0 to 4.7 meters with the shutterway monitoring function. - Improved detection range adjustment function. It allows for detection range adjustments one column at a time in width and depth, enabling area adjustments to suit the installation environment. - Industry-leading 60 spots. With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. - Strengthened environmental and insect countermeasures. The "environmental countermeasures" feature has three levels, and the "insect countermeasures" function further enhances measures against malfunctions caused by snowfall or flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when the temperature reaches a level where snowfall is predicted, reducing malfunctions caused by snow. *When environmental countermeasures are set, the level of environmental countermeasures automatically increases by one level during low temperatures. - Status indication with 7-color LED. The 7-color LED display allows for confirmation of the setting status (environmental countermeasures and insect mode) and enables the identification of malfunctioning columns through the detection range confirmation mode.

• Safety Sensors

■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Stationary object detection time setting Settings for ∞ seconds, 60 seconds, 10 seconds, and 2 seconds are available. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Area adjustment The depth area can be set to 4 rows, 3 rows, 2 rows, or 1 row using dip switches. The width area can be set for the left and right using area masks. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations from the installation area during shutter opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to configure the sensors to have different settings.

• Safety Sensors