セキュリティハウス List of Products and Services

■Main Features ● When the switch is pressed, the occupancy lamp lights up, and it outputs 2 contact points accordingly. Pressing it again turns it off and reverses the 2 contact point output. It can be incorporated into a living safety notification system for use. ● Brightness can be switched between two levels. ● Original design with colors that are easy for elderly individuals with glaucoma to see (when lit). ● You can freely write on the nameplate (e.g., "Lights on when occupied," "Press," etc.). ● Suitable for a single switch box.

• Other security and surveillance systems

■ Waterproof structure push button switch The push button switch (TB-B) has a waterproof structure, allowing it to be installed in various locations such as toilets, bathrooms, rehabilitation rooms, hallways, and private rooms. ■ Can be connected to any display panel It has a non-voltage contact output (a contact), so it can be connected to any display panel, including channel display panels. ■ Push button for toilets and bathrooms - Pressing the "call button" or pulling the cord will trigger the output. - It displays a lamp when powered by DC12V. - It can be used without supplying power (DC12V). ■ Can be embedded in walls It is compatible with a single switch box, allowing it to be embedded in the wall.

• Other security and surveillance systems

Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor and semi-outdoor (places not directly exposed to rain)

• Safety Sensors

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Other security and surveillance systems

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Other security and surveillance systems

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Other security and surveillance systems

■Features ●Compatible with single switch boxes ●Contact output: Non-voltage a contact (DC30V, 0.3A or less) ●Water resistance: JIS C0920 protection grade 6 ●Installation location: Indoor

• Safety Sensors

■Features ● Used for calling the life safety system, resetting sensors, and displaying or resetting the toilet usage notification system ● Lamp and switch integrated (independent connection) ● Dedicated to DC12V ● Outputs c contact when the button is pressed (with recovery/RESET indication) ● It is also possible for the lamp to light up when pressed through wiring ● Compatible with single switch box

• Other security and surveillance systems

■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch BOX

• Other security and surveillance systems

■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch box

• Other security and surveillance systems

■Features ● When a card or business card is inserted, it outputs a no-voltage contact (c contact). ● It connects with the Life Safety Alarm SAH-2(S) and is used as a life safety system. ● If you attach the room key to the card, it will turn OFF when you take the card out while going out, and turn ON when you return home and put the card back. ● It is compatible with a single switch box.

• Other security and surveillance systems

■Features ● With the latch output switch, pressing the button lights up the call lamp and outputs 2 c contacts. Pressing it again turns off the lamp and reverses the output. The switch status can be determined by the lamp's on/off state. It can be used in an emergency call system. ● Since it outputs 2 c contacts, two systems can be configured. ● Original design with colors that are easy for elderly people with cataracts to see (when lit). ● You can freely write on the nameplate (e.g., "Press," "Emergency," etc.). ● Suitable for a single switch box.

• Other security and surveillance systems

■Main Features ● The door can be opened and closed simply by inserting your foot, making it ideal for hospital operating rooms and similar environments. ● The embedded box is compatible with a 3-gang switch box, allowing for easy installation. ● The controller has a compact size of W: 45mm H: 94mm D: 29mm. It can be installed in various locations, even as a separate unit. ● The exterior is made of stainless steel (SUS304HL), enhancing durability. ● Custom dimensions are also available; please inquire separately. ● For surface-mounted installation, we offer a surface box (FRB-02) (optional, open price).

• Other security and surveillance systems

■Features ● Instead of manually pressing switches, this device can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-style pedal that detects pressure from either side. ● Comes with a "protective cover" to prevent accidental activation due to falling objects.

• Other security and surveillance systems

■Main Features ● It allows for the opening and closing of automatic doors without touching the main unit, making it ideal for environments that require hygiene considerations, such as food factories and hospitals. ● The adoption of microwave technology significantly reduces the risk of malfunction due to condensation in environments with temperature differences, such as cold storage. ● The detection status can be easily confirmed at a glance through LED display and audible feedback. ● Output can be set to two patterns: one-shot and latch output. ● Installation is compatible with a single switch box (JIS standard). ● Designed to be washable with an IP55 equivalent rating. (The wall and back surfaces are not included.) ● With a thickness of 22mm, it does not create a sense of discomfort when placed alongside other devices. * Continuous detection of stationary objects is not possible. * Do not place moving objects within the detection area, as this may cause malfunctions. * If the unit is installed on a metal wall, the detection distance may be reduced.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

■Features ● The settings for DA-3600 and DA-4000 require DSY and a smartphone, etc. ● Up to 16 sensors can be connected with one setting unit. ● If monitoring is to be done continuously with a tablet, DSY will be permanently installed. ● If only device settings are needed, it will be removed after the settings are completed. Notes ◆ About the setting software ◆ The setting software can only be used on smartphones and tablets (Android type). Since the app is compressed in a zip file, please unzip it using a zip extraction app before use.

• Safety Sensors

■72 optical spots can be set You can set 72 optical spots individually for detection and non-detection, allowing for area surveillance settings that suit the site. Additionally, detection spots can be divided into 4 groups, each with adjustable sensitivity and output time settings. ■Settings via dedicated software The settings for the main unit are performed by connecting it to an optional (sold separately) setting unit DSY and a device such as a smartphone or tablet running Android 2.2 or higher with a dedicated app installed, via Wi-Fi. The detection status can be viewed in real-time, ensuring accurate area settings. There is also no need to work at heights. (Please download the dedicated software from our website.) ■Interference prevention feature With four interference prevention modes, the same sensor can be installed in close proximity without causing malfunctions. ■Environmental settings Environmental settings can be configured in up to four levels, which helps reduce false detections caused by snow, insects, and other factors.

• Safety Sensors

■Up to 72 detection spots can be set You can set the 72 detection spots of the sensor into four groups, and you can also change one detection spot to a non-detection area. In the four groups, you can individually set sensitivity, hold time, output time, and noise environment. *Settings are done using a smartphone or tablet. ■Function settings can be done with a smartphone Various settings for functions and sensors are performed via Wi-Fi communication using a smartphone or tablet with Android 2.2 or higher installed. (Please download the dedicated app from our website.) This makes work at heights safer, as only the installation of the equipment is required. (A separate setting unit, DSY, is required for configuration.) ■Eco function Detection is not activated in the horizontal direction, while detection occurs in the direction towards the sensor. Additionally, the output time is shorter in the direction away from the sensor, reducing unnecessary openings and closings. ■Output settings Output can switch between contact a and contact b, and in the case of contact b, it operates in fail-safe mode (open during power failure).

• Safety Sensors

For more details, please refer to the basic information.

• Entrance and exit control system

■Main Unit (DX-S35F) ●Detects objects through direct reflection using a phase difference method. ●Achieves a detection accuracy of 3m. ●Equipped with an anti-interference function. Up to 4 units can be connected. ●There is also a connection cable available in a 5m specification "DX-S35F-Y5". *When used for a visitor counter, please set it to a single optical axis. Storage Attachment ●Can be mounted not only on walls but also on poles.

• Entrance and exit control system

■Features ● Detects objects through direct reflection using a phase difference method. ● Achieves a detection accuracy of 3m. ● Equipped with an anti-interference function. Up to 4 units can be connected. ● A 5m connection cable model "DX-S35F-Y5" is also available. *When used at a visitor counter, please set it to a single optical axis.

• Entrance and exit control system

■Features ●Embedded infrared sensor for visitor counters (real-time output type) ●Can be installed in a small space with a compact and slim sensor head. ●Ultra-compact controller ●Detection distance can reach up to 6m. (When using the optional item BS-10N, it can reach up to 10m.)

• Entrance and exit control system

■Features ● Analyzes the position, speed, size, quantity, and trajectory of objects within the detection range to count more accurately. ● One sensor can accommodate ceiling heights (2.5 to 4.5m) and detection widths (2.5 to 4.5m). ● Capable of directional counting. ● Up to 7 child units can be connected in parallel to one master unit, allowing for coverage of wide openings. ● Ceiling-mounted installation does not compromise the store's image. * An optional surface mount base (IWC500W) or recessed mount base (IWC510W) is required.

• Entrance and exit control system

■Features ● Infrared sensor for customer counters with a detection distance of 5m (real-time output). ● It is a reflective sensor with an integrated light-emitting and light-receiving unit, allowing for wiring work only on the main unit side, which enhances maintenance. ● It uses a retroreflector, allowing for an incident angle of infrared rays of up to 30° (±15°). ● Compatible with all of our customer counter products.

• Entrance and exit control system

■Features ● It distinguishes between entrants and exits based on sensor signal input and displays the number of people remaining. ● When operating on AC100V, it outputs power for the sensor (DC24V 450mA). ● It can provide two points (two stages) of alarm output. For example, when the number of people remaining reaches 10, it activates the first output, and when it reaches 20, it activates the second output. This can be combined with voice alert devices, rotating lights, and flashlights to notify the surroundings. ● Program modifications tailored to the site are possible. *Note: If the operating specifications change, a separate estimate will be provided. *The number of people remaining that triggers the first and second outputs will be specified at the time of order. Installation Locations Places with high density of people, such as zoos, exhibition rooms, and supermarkets.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Visitor Count Since two sensors can be installed, the total count for two gates can be recorded. *Individual counts for each gate cannot be performed. ■Direction Detection for Visitor Entry and Exit By using two sensors, it is possible to determine the direction of visitor entry and exit. ■Visitor Height Detection By installing two sensors vertically, it is possible to determine the height of visitors. ■Access via Network, Usable from Headquarters and Other Locations An environment tailored to customer needs can be easily constructed and operated. ■Aggregation by Any Desired Group (Up to 5 Groups) Aggregation can be done not only by store unit but also by floor or area. ■Data Collection Every 5 Minutes; Aggregation Possible in 15-Minute Intervals The minimum time unit is 15 minutes. Aggregation can be done by time, day, week, month, year, and day of the week. ■Aggregation Software The aggregation software is included with the main unit. ■Multiple Gates For multiple gates, please use the gate addition unit (P3-PCT-AD).

• Entrance and exit control system

■Easily and effectively grasp the number of visitors The visitor counter counts the number of visitors without causing discomfort by using sensors installed near the entrance and exit gates. It can be easily installed using the facility's columns and walls without the need for large-scale construction, making it suitable for banks, department stores, government offices, libraries, theaters, and more. Understanding previously unseen numbers Automatically aggregates the number of people entering and exiting Utilizes the flow of people for effective marketing strategies ■Counts up to 8 gates (8 sensors). ■In addition to 1/1 and 1/2 counts, it can also count the number of entrants and exits with direction discrimination (up to 4 gates for direction discrimination). ■By setting effective time, it can count only during necessary time periods, such as business hours. ■Equipped with a power supply for sensors (DC12V/1A). ■Analysis data of visitor numbers by time period, month, etc., using the included aggregation software can be utilized for marketing. ■The aggregation software allows for the printing of daily, monthly, and annual reports.

• Entrance and exit control system

■Features ● This device automatically counts the number of visitors using sensors installed near the gate. ● It can count visitors for up to 4 gates. ● It can display the count for each of the 4 gates as well as the total count for all 4 gates. * The display for the 4th channel can switch between the total count and the individual count. ● The internal switch allows for switching between 1/1 and 1/2 counting modes. ● It can be wall-mounted, allowing for installation without compromising aesthetics.

• Entrance and exit control system

■Easily and effectively grasp the number of visitors The visitor counter counts the number of visitors without causing discomfort by using sensors installed near the entrance and exit gates. It requires no major construction and can be easily installed using the facility's columns and walls, making it suitable for use in banks, department stores, government offices, libraries, theaters, and more. ■Understanding previously unseen numbers Automatically aggregates the number of visitors entering and exiting Utilizes the flow of people for effective marketing strategies ■It is possible to switch between various counting methods (1/1 count, 1/2 count). In 1/2 count mode, it can display a count for 1 entry and 1 exit as 1 count, indicating the number of visitors. ■There are 4 channels for signal input, allowing for individual channel displays as well as a total display for all channels. ■In the event of a power outage or when the power is turned off, the count (last recorded value) is retained. ■Counts can be reset individually or collectively. ■Equipped with a power supply for the sensors (DC12V/300mA).

• Entrance and exit control system

■Features 1. Contact conversion device equipped with four modes 【Cloud Reporting Mode】 (Cloud service usage) - Sends contact signals such as equipment anomalies to the server and reports via voice or email. - Allows viewing of reporting history from PCs or smartphones. 【Cloud Visitor Counter Mode】 (Cloud service usage) - Sends contact signals to the server and aggregates counts for each contact on the cloud server. - Allows viewing of aggregation results from PCs or smartphones, and enables the creation of daily, monthly, and yearly aggregation reports. 【Annual Timer Mode】 - Operates contacts according to a custom schedule. - Allows registration of 20 patterns (operations) for each day of the week. - Allows registration of up to 50 specific days (such as holidays). 【Contact Transmission Mode】 - Outputs input signals from contacts to another device installed in a different location via the network. - Enables monitoring of alarm information from equipment in remote locations. 2. Simultaneous contact output is possible for input signals, allowing control of deterrent devices on-site.

• Entrance and exit control system

■Features ● This is a contact input unit that sends sensor signals to a cloud server. ● The server-side application aggregates visitor counts. (It is possible to output reports by date, monthly, and annually.) ● The aggregated data can be viewed anywhere with an internet connection. ● The server system is "Gateway Counter" (manufactured by Excite Corporation). (A license agreement is required for each terminal.) *Additional server usage fees will be required.

• Entrance and exit control system

● Standalone operation is possible without a PC. ● Authentication methods include facial recognition, fingerprint recognition, and card authentication (FeliCa, MIFARE), as well as PIN codes, with mixed operation also possible. ● The maximum number of registrable individuals is 500,000: - Facial recognition: 7,000 for 1:N authentication, 100,000 for 1:1 authentication. - Fingerprint recognition: 100,000 for 1:N authentication, 500,000 for 1:1 authentication. - Cards and PIN codes can be registered up to 500,000 entries. ● Each user can select their authentication method, and AND authentication using face, fingerprint, card, and PIN code is possible. ● With the built-in infrared camera and infrared lighting (LED), facial recognition can be performed in illumination environments ranging from 0 lx to a maximum of 30,000 lx, allowing installation in various locations. ● It can prevent misrecognition caused by counterfeit fingerprints or images such as photographs. ● The LCD touch panel allows for easy operation while viewing guidance for settings and registration. ● With the separately sold management software (UNIS), settings, registration information, and history for up to 1,000 terminals can be centrally managed from a single computer.

• Entrance and exit control system

■Features ● Standalone operation is possible without a PC. ● Authentication methods can be selected from fingerprint recognition, card recognition (FeliCa, MIFARE), and PIN code, with mixed operation also possible. ● The maximum number of registrable users is 20,002. Fingerprints can be registered for 15,000 in 1:N authentication, and 20,002 in 1:1 authentication. Cards and PIN codes can be registered up to 20,002 entries. ● Each user can select their authentication method, and AND authentication using fingerprint, card, and PIN code is possible. ● The LCD touch panel allows for easy operation while viewing guidance for settings and registration. ● With the separately sold management software (UNIS), configuration information, registration information, and history for up to 1,000 terminals can be centrally managed from a single computer. ● The management software includes a desktop reader for fingerprint and card reading. ● It can control electric locks when combined with an electric lock control panel.

• Entrance and exit control system

■Features ● This is a rain cover specifically designed for the voice-enabled non-contact card switch ACS-112 and the card reader with keypad ACS-TMR. ● It can be used in locations where it may be exposed to rain under eaves. ● Card verification can be performed from above the front panel. * Our handled cards and tags [ACS-FLcard], [ACS-FLST], [NT-5000C], and [NT-5000K] have been confirmed to work.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Features ● This is a tag exclusively for FeliCa IDm. ● It is compatible with card readers that use the FeliCa standard, including 【ACS-102F】【ACsmart】【FC-100】. ● Made from durable PC resin, it meets protection grade IP65 (dustproof and water jet resistant). It has a robust construction. ● The dimensions are W32×H56×D8mm, making it a convenient size that can be used with various commercially available keychains.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Features ● The 【ACS-FMI】 has revamped its voice message content for security-related applications, providing voice guidance tailored to the situation to prevent operational errors. ● It has a sleek design that matches well with the popular ACsmart card reader. * When connecting and operating the security button unit 【ACS-KBU】, the ACS-Client software version 3.0.0.0 or later is required. * When connecting and operating the security button unit 【ACS-KBU】, the ACS-C controller must be version V0302 (LOT No. 3031) or later. * The security button unit 【ACS-KBU】 is exclusively for use with the card reader 【ACS-FMI】. Please note that it cannot be combined with 【ACS-FR】.

• Entrance and exit control system

■FeliCa/Mifare/I-CODE Compatible Compatible with FeliCa/Mifare/I-CODE cards. Supports both fixed reading mode for each card and multi-read. ■Sophisticated Design Card Reader The compact ACS-DHR features a novel design where the surroundings glow blue during card verification. The ACS-BLR has a sophisticated design that glows blue all over during card verification. The ACS-TMR is a slim design card reader with a keypad. ■Feature-Rich Keypad Card Reader The keypad card reader ACS-TMR can operate with three verification methods: "Card only," "PIN only," and "Card + PIN." ■Protection Rating IPX5 The card readers ACS-DHR and ACS-BLR have a protection rating of IPX5, allowing them to be installed in locations exposed to direct rain, such as building exteriors. ■Security Set/Reset By combining the optional security button unit [ACS-KBU] with the ACS-FMI, it can operate as a local security system.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system