PRIMES Japan Product Lineup

The "Scan Field Monitor (SFM)" is a groundbreaking measurement system ideal for 3D printing systems (additive manufacturing). It acquires various data by scanning a laser on a special glass (patented). It can measure all parameters essential for operation verification before 3D printing in just about 3 seconds. All measurements, including scan speed, scan position accuracy, beam diameter, and focus shift, are achieved with a single device. 【Features】 ■ Beam diagnostics that were previously impossible, such as scan speed and beam diagnostics at various positions, are now possible. ■ By integrating applications for multiple calibration tasks into one device, cost reduction, efficiency improvement, and reduction of work time are achieved. ■ Measurements can be taken under actual operating conditions for laser sintering (laser power and inert gas atmosphere). ■ Comprehensive scanner analysis is possible with a single device. ■ A compact measurement tool with excellent practicality. 【Specifications】 ■ Wavelength: 1,000 to 1,100 nm ■ Input Power: 10 to 1,500 W ■ Beam Diameter: 50 to 500 μm ■ Maximum Power Density: 100 MW/cm² *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

The "Focus Monitor FM+" is a measurement device that can measure both the focusing area and defocusing area, making it ideal for analyzing high-power lasers and high-output density lasers. It measures beam characteristics of focused lasers, such as focal position, BPP, and M2, without attenuation. The HPD type, which adopts a synthetic quartz measurement chip and the innovative measurement principle FS3 (maximum power density: 50MW/cm²), has also been released. 【Features】 - Capable of measuring multi-kW green lasers and blue lasers - Caustic measurement (Z-axis: 120mm) - Easy installation allows for measurement at various wavelengths simply by swapping the rotating chip and detector - Improved data transfer speed with Ethernet adoption - Increased data management bits and enhanced functionality - New software adopted for improved operability 【Specifications】 - Wavelength: 400–1,600nm or 9–12μm - Input power: 30W–25kW - Beam diameter: 100–3,000μm - Maximum power density: NIR laser: 10MW/cm² CO2 laser: 30MW/cm² *For more details, please download the PDF or contact us.

• Other environmental analysis equipment
• Other analyses
• Other measurement, recording and measuring instruments

The "Beam Monitor BM+" is a non-focusing measurement device equipped with the latest electronics, designed for measuring high-power CO2 lasers and solid-state lasers in continuous wave (CW) operation. By analyzing and documenting laser parameters, it can further optimize work processes and identify undesirable deviations caused by dirt, beam position shifts, and optical misalignments. 【Features】 ■ Direct measurement of raw beams ■ New tip design: measures beam divergence angles up to 200 mrad ■ Improved data transfer speed with Ethernet ■ Increased data management bits and enhanced functionality ■ New software adopted for improved operability ■ Contributes to increased productivity and reduced total costs in high-power laser processing ■ Detection of degradation and deviations 【Specifications】 ■ Aperture diameter: 60mm or 100mm ■ Wavelength: 450–1,090nm or 10,600nm ■ Input power: 50W to 25kW *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

The "Cube" is a laser power meter that allows for easy power measurement without the need for external displays, power cables, or cooling water supply tubes. It features a built-in rechargeable lithium battery that can be charged via USB connection, and the LCD display shows data such as the last measured laser power, irradiation time, and the temperature of the absorber during measurement. It has a robust and stylish housing that protects against shocks and dust. 【Features】 ■ Laser power measurement possible in a short time even in narrow spaces ■ Laser power measurement across the entire light path to the workpiece ■ Dustproof and shock-resistant, suitable for power monitoring in harsh manufacturing environments ■ Measurement possible with an Android-compatible app 【Specifications】 ■ Wavelength: Cube/Cube L: 440 – 460 nm, 510 - 540 nm, 800 - 1100 nm Cube L1: 900 - 1100 nm ■ Input power: 25W to 20kW ■ Maximum power density: 250kW/cm² ■ Measurement accuracy: ±3%, reproducibility: ±1% *Specifications may vary by model. For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

The "Power Monitor (PM)" is a laser power meter designed for high-power laser measurements, minimizing the reflection and scattering of laser light to achieve a very high absorption rate. It is highly portable, allowing for flexible use in various areas and can be moved for use with different equipment within a factory. Measurement data is displayed on the built-in LCD, but the PM can also be operated via a PC. 【Features】 ■ Measures the power of CW lasers in the wavelength range of solid lasers (VIR-NIR) or CO2 lasers ■ Water-cooled power meter: employs a calorimetric method ■ Safety design: Reflection beam is less than 0.1%. Fully absorption design ■ Robust design: withstands harsh operating environments such as manufacturing sites ■ Measurement accuracy: +/-2% or less, reproducibility: +/-1% or less 【Specifications】 ■ Aperture diameter: 48mm or 100mm ■ Wavelength: 350–1,100nm or 10,600nm ■ Input power: 300W–8kW or 1kW–25kW *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Other analyses