MORESCO List of Products and Services

◎ This is a hot melt that cures by reacting with moisture contained in the atmosphere or substrate. ◎ It has the same cohesive strength as regular hot melts immediately after application, providing excellent initial adhesion (about 30% of full cure). ◎ It fully cures in about 2 days at room temperature and humidity (25°C, 60% RH). ◎ After curing, it does not melt even when heated. Please note that it is also not soluble in organic solvents. ◎ Please use a specialized applicator that blocks moisture for application.

• glue

This is a hot melt adhesive used for labels and the adhesive on envelope flaps. It has good die-cutting suitability and excellent oil bleed resistance. It contains 30% biomass and is certified with the Biomass Mark by the Japan Organic Resources Association.

• glue

This is a hot melt adhesive used for labels for refrigeration and freezing applications. It has excellent adhesion in low-temperature environments and can adhere even at -18°C. It contains 25% biomass and is certified with the biomass mark by the Japan Organic Resources Association.

• glue
• glue

This is a hot melt adhesive used for labels for food applications. It is made from materials compliant with FDA 175.125 and can be directly applied to vegetables and fruits. It has a biomass content of 30% and is certified by the Japan Organic Resources Association with a biomass mark.

• glue

Resco High Grease UM-1 has improved heat resistance and superior load-bearing capacity compared to conventional greases, extending grease life and making it suitable for lubrication in high-temperature environments. <Features> ● It has a low friction coefficient over a wide temperature range, reducing friction and wear. ● It withstands long-term use, reducing maintenance efforts. ● It has excellent mechanical stability. ● It contributes to cost reduction by reducing grease consumption. *For more details, please contact us.

• Lubricants

● This is a high-temperature lubricant developed using raw materials specified in FDA (U.S. Food and Drug Administration) 21 CFR 178.3570 and is NSF H1* certified. ● It demonstrates excellent heat resistance and oxidation resistance in the practical condition of a thin film. ● It produces minimal residue, making maintenance easier. ● It is a high-temperature lubricant based on ester synthetic oil. *Please feel free to contact us for more details.

• Lubricants

● This is a high-temperature lubricant developed using raw materials specified in FDA (U.S. Food and Drug Administration) 21 CFR 178.3570 and is NSF H1* certified. ● It demonstrates excellent heat resistance and oxidation resistance in the practical condition of a thin film. ● It produces minimal residue, making maintenance easier. ● It is a high-temperature lubricant based on ester synthetic oil. *For more details, please feel free to contact us.

• Lubricants

There are numerous achievements as a heat-resistant chain oil. This is a newly developed high-temperature lubricant that can be used at temperatures above 200°C and has a long lifespan. ● It demonstrates excellent heat resistance and oxidation resistance in a thin film state, which is a practical condition for lubricants. ● It exhibits excellent characteristics as a lubricant for areas requiring long lifespan. ● It has excellent lubricating properties and reduces friction. ● It produces minimal residue, making maintenance easier. *Please feel free to contact us for more details.

• Lubricants

This is a newly developed high-temperature lubricant that has numerous achievements as a heat-resistant chain oil. It can be used at high temperatures above 200°C and is a long-lasting lubricant. ● It demonstrates excellent heat resistance and oxidation resistance in a thin film state, which is a practical condition for lubricants. ● It exhibits excellent properties as a lubricant for areas requiring long service life. ● It has excellent lubricity and reduces friction. ● It produces minimal residue, making maintenance easier. *For more details, please feel free to contact us.*

• Lubricants

"Moresco Hailube L-830" is a high-temperature lubricant that is a pale yellow transparent liquid with excellent heat resistance and oxidation resistance, and extremely low evaporation loss. It has a proven track record as a heat-resistant chain oil. <Features> ● Excellent heat resistance and oxidation resistance, maintaining a liquid state for long periods in high-temperature environments. ● Low evaporation loss, requiring less oil supply. ● Superior lubricating properties, reducing wear. ● High flash point, ensuring excellent safety.

• Lubricants

"Moresco Hiruub L-560" is a high-temperature lubricant that is a pale yellow transparent liquid with excellent heat resistance and oxidation resistance, and very low evaporation loss. It has a proven track record as a heat-resistant chain oil. <Features> ● Excellent heat resistance and oxidation resistance, maintaining a liquid state for long periods in high-temperature environments. ● Low evaporation loss, requiring less oil supply. ● Superior lubricity, reducing wear. ● High flash point, ensuring excellent safety.

• Lubricants

"Moresco Hylube L-320" is a high-temperature lubricant with excellent heat resistance and oxidation resistance, characterized by its extremely low evaporation rate and pale yellow transparent liquid that is highly non-contaminating. It has numerous achievements as a heat-resistant chain oil. <Features> ● Excellent heat resistance and oxidation resistance, maintaining a liquid state for extended periods in high-temperature environments. ● Low evaporation rate, requiring less oil supply. ● Superior lubricity, reducing wear. ● High flash point, ensuring excellent safety. *For more details, please feel free to contact us.

• Lubricants

"Moresco Hailube L-150" is a high-temperature lubricant with excellent heat resistance and oxidation resistance, characterized by a very low evaporation rate and a pale yellow transparent liquid that is non-contaminating. It has a proven track record as a heat-resistant chain oil. <Features> ● Excellent heat resistance and oxidation resistance, maintaining a liquid state for long periods in high-temperature environments. ● Low evaporation rate, requiring less oil supply. ● Superior lubricating properties, reducing wear. ● High flash point, ensuring excellent safety.

• Lubricants

Liquid paraffin, also known as white oil or mineral oil, is made from highly refined, colorless, transparent, tasteless, and odorless saturated hydrocarbons. Impurities such as aromatic hydrocarbons and sulfur compounds found in petroleum lubricating oil fractions are removed using anhydrous sulfuric acid or fuming sulfuric acid, resulting in high-purity refinement. It possesses various excellent characteristics that are not found in other fractions, making it the purest form of hydrocarbon. 1. High reliability, having passed food additive standards and pharmaceutical ingredient standards, and conforming to the Japanese Pharmacopoeia tests. 2. Colorless, transparent, tasteless, odorless, and non-fluorescent. 3. Extremely low ultraviolet absorbance and high purity. (Impurities that absorb ultraviolet light, such as aromatic hydrocarbons and sulfur compounds, have been removed.) 4. Chemically stable, inert, non-polar saturated hydrocarbon. 5. Almost no skin irritation, ensuring safety for the human body. 6. Excellent lubricating, softening, plasticizing, penetrating, and emulsifying properties, as well as functioning to prevent foaming, making it easy to apply. *For more details, please feel free to contact us.

• Chemicals
• others

Liquid paraffin, also known as white oil or mineral oil, is made from highly refined, colorless, transparent, tasteless, and odorless saturated hydrocarbons. Impurities such as aromatic hydrocarbons and sulfur compounds found in petroleum lubricating oil fractions are removed using anhydrous sulfuric acid or fuming sulfuric acid, resulting in high-purity refinement. It possesses various excellent characteristics that are not found in other fractions, making it the purest form of hydrocarbon. 1. High reliability, having passed food additive standards and pharmaceutical ingredient standards, and conforming to the Japanese Pharmacopoeia tests. 2. Colorless, transparent, tasteless, odorless, and non-fluorescent. 3. Extremely low ultraviolet absorbance, indicating high purity. (Impurities that absorb ultraviolet light, such as aromatic hydrocarbons and sulfur compounds, have been removed.) 4. Chemically stable, inert, non-polar saturated hydrocarbon. 5. Minimal skin irritation and safety that is gentle on the human body. 6. Excellent lubricating, softening, plasticizing, penetrating, emulsifying properties, and also works to prevent foaming, making it easy to apply. *For more details, please feel free to contact us.

• Chemicals
• Lithium-ion battery
• others

This device is capable of measuring the gas barrier properties of films quickly, with high sensitivity and precision. It contributes to research and development as well as quality control in various fields, such as organic devices and solar cells that require high water vapor barrier properties, and in the food and pharmaceutical packaging sectors where oxygen barrier properties are crucial to prevent quality degradation due to oxidation. It can detect a water vapor transmission rate of 10^-7 g·m^-2·day^-1, equivalent to one drop of water falling on a sample (film) with an area equal to that of 10 soccer fields per day. Additionally, a newly developed measurement method significantly shortens the measurement time, and by using calibration instruments from public institutions, quantitative measurements traceable to national standards are possible.

• Analytical Equipment and Devices
• Contract measurement

Lubcaster AP-2200 is a newly developed flow forming processing and aluminum forging lubricant. Despite being white-based, it achieves lubrication and release properties comparable to water-based graphite-type lubricants. Additionally, due to its water-soluble white base, it contributes to improved working environment conditions. 1. It does not contain graphite, so it does not contaminate the working environment. 2. It can be diluted with water, and since it does not produce smoke or catch fire, it is easy to handle. 3. It has lubrication and release properties comparable to water-based graphite-type lubricants. 4. The formulation of additives has improved adhesion at high temperatures. 5. Concentration management is possible using sugar degree refractive index (Brix %).

• Forging Machine
• Lubricants

"Neo Back MR-250" is a vacuum pump oil that has been precisely distilled using highly refined mineral oil through a high vacuum distillation apparatus. It can be used as vacuum pump oil for large pumps. ISO viscosity grade: 100 Due to its chemically stable base oil, the generation of oxidation degradation products is suppressed, and because it contains few heavy components, it exhibits excellent anti-emulsification properties and allows for easy separation of water. 【Features】 - Exhibits extremely low vapor pressure due to the low amount of light components. - The achievable pressure can be expected to reach the limits of the pump. - The evaporation rate is extremely low due to precise distillation, keeping oil back to a minimum. - Contains few heavy components, resulting in excellent anti-emulsification properties and easy water separation. - The chemically stable base oil suppresses the generation of oxidation degradation products. *For more details, please refer to the PDF document or feel free to contact us.*

• Lubricants
• Fats and oils

The "Neo Back MR-100" is a vacuum pump oil that has been precisely distilled from highly refined mineral oil using a high vacuum distillation apparatus. It is optimal as a vacuum pump oil for small pumps. ISO viscosity grade: 46 Due to its chemically stable base oil, the generation of oxidation degradation products is suppressed, and because it contains low heavy components, it exhibits excellent anti-emulsification properties and allows for easy separation of water. 【Features】 ■ Exhibits extremely low vapor pressure due to the low amount of light components ■ The achievable pressure can be expected to reach the limits of the pump ■ Due to precise distillation, the evaporation amount is extremely low, minimizing oil back ■ With low heavy components, it has excellent anti-emulsification properties and allows for easy separation of water ■ The chemically stable base oil suppresses the generation of oxidation degradation products *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• Fats and oils

The "Neo Back MR-200" is a vacuum pump oil that has been precisely distilled using highly refined mineral oil through a high vacuum distillation apparatus. It can be used as a standard product for high vacuum pump oil. ISO viscosity grade: 68 Due to its chemically stable base oil, the generation of oxidation degradation products is suppressed, and because it contains few heavy components, it exhibits excellent anti-emulsification properties and allows for easy separation of water. 【Features】 ■ Exhibits extremely low vapor pressure due to the low amount of light components ■ The achievable pressure can be expected to reach the limits of the pump ■ Due to precise distillation, the evaporation amount is extremely low, keeping oil back to a minimum ■ With few heavy components, it has excellent anti-emulsification properties and allows for easy separation of water ■ As a chemically stable base oil, the generation of oxidation degradation products is suppressed *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• Fats and oils

The "Moresco Tool Mate BS-1" is a water-soluble cutting and grinding oil for iron, in a soluble type. It excels in cleanliness, reducing stickiness of the product and dirt around the equipment. Additionally, it minimizes the amount of coolant carried away by the product and chips, thereby reducing usage. With our unique biostatic technology and the synergistic effect of several types of preservatives, it exhibits excellent preservative properties, improving the working environment. 【Features】 ■ Improves the working environment ■ Keeps the area around machines clean ■ Reduces the amount of concentrate used ■ Suppresses rust formation *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

The "Moresco Tool Mate BS-9" is a product developed for processing aluminum alloy and iron-based materials. It demonstrates excellent preservative properties through the synergistic effect of our unique biostatic technology and several types of preservatives. Additionally, it excels in corrosion resistance for aluminum alloys, providing peace of mind even during the rainy season. It prevents aluminum corrosion even in cases of prolonged processing or when cleaning takes time. 【Features】 ■ Excellent corrosion resistance for aluminum alloys ■ Suitable for various workpiece materials ■ Superior preservative properties ■ Chlorine-free *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

"Moresco Tool Mate GD" is a synthetic type of water-soluble cutting and grinding oil that excels in the separation of mixed oils. With excellent cooling effects, it allows for good cutting and grinding surfaces. Additionally, due to the inclusion of synthetic oils, it also has good lubricating properties. Furthermore, its excellent rust prevention prevents the adhesion of chips and the discoloration of coolant when machining cast iron. 【Features】 ■ Excellent anti-corrosion properties ■ Excellent cooling effects ■ Excellent rust prevention ■ Excellent defoaming properties ■ Low turbidity, maintaining liquid transparency for an extended period *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

The "Moresco Tool Mate GR-2" is a product developed for grinding processing of general steel materials. It has excellent defoaming properties, preventing troubles caused by foam and maintaining stable processing. Additionally, its superior grinding performance results in a good finish for products and extends the lifespan of grinding wheels. Furthermore, it can be used at high dilution rates and is suitable for rough and medium finishing cutting, as well as light grinding processing of general steel materials. 【Features】 ■ Excellent grinding performance ■ Excellent defoaming properties ■ Excellent rust prevention *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

"S-4627N4" is a water-soluble cutting oil of the emulsion type. It maintains a stable pH for a long time and suppresses rusting of products and equipment. It is compatible with various water qualities. Additionally, it floats any bonded substances that may mix into the liquid, achieving long life for the coolant. It reduces dirt within the equipment and improves the working environment. 【Features】 ■ Environmentally friendly ■ Excellent cutting performance ■ Suppresses rust formation ■ Effective for machining cold forged products *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

The "Cutting☆Star 7500BL" is a high-performance synthetic water-soluble cutting and grinding oil. It is formulated with a synthetic oil that has excellent lubricating properties, and while it is transparent, it possesses outstanding cutting performance. Thanks to our unique biostatic technology and the synergistic effect of several types of preservatives, it exhibits excellent preservative properties. 【Features】 ■ Excellent defoaming properties ■ Superior cutting performance ■ Excellent preservative properties ■ Excellent separation from other oils ■ Maintains liquid transparency for an extended period *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

"Cutting☆Star 88SU" is a water-soluble cutting oil that has improved preservative performance compared to conventional emulsion types. By utilizing our unique core technology, it suppresses liquid degradation due to spoilage and achieves long liquid life. Additionally, it excels in corrosion resistance for non-ferrous metals (especially aluminum alloys), reducing defect rates and rework due to corrosion. 【Features】 ■ Excellent cutting performance ■ Superior preservative properties ■ Outstanding compatibility with aluminum ■ Environmentally friendly *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

The "Cutting☆Star 7000C" is a synthetic solution for iron-based materials that excels in anti-foaming properties and extends the lifespan of the liquid, achieving longer intervals for waste liquid and replacement. By incorporating a special lubricant that is difficult to foam, it successfully balances lubrication and anti-foaming properties. It can be used safely without overflowing even in high-pressure coolant systems or equipment with high flow rates. 【Features】 ■ Balances lubrication and anti-foaming properties ■ Improved work environment due to enhanced anti-corrosion properties ■ Environmentally friendly product ■ The synergistic effect of our unique biostatic technology and several types of preservatives suppresses liquid degradation with excellent oil separation properties ■ Chlorinated extreme pressure agents, phosphorus-based additives, and boron-based additives are not included, considering environmental impact *For more details, please refer to the PDF document or feel free to contact us.

• Cutting Oil

The "Cutting☆Star 7700S" is a soluble type of water-soluble cutting and grinding oil. By applying biostatic technology, it suppresses the decrease in pH and exhibits excellent preservative effects over a long period. Additionally, it prevents rust even under the harsh conditions of the rainy season. It also prevents foaming issues in machines with high-pressure coolant specifications. 【Features】 ■ Excellent preservative properties ■ Excellent rust prevention properties ■ Excellent cutting performance ■ Excellent defoaming properties *For more details, please refer to the PDF materials or feel free to contact us.

• Cutting Oil

The "Cutting☆Star 8800AT" is a versatile emulsion designed for aircraft components made from aluminum alloys, titanium alloys, and more. With excellent overall balance, it maintains stable performance over long periods and contributes to the long life of cutting fluids. Additionally, thanks to our unique technology that utilizes special lubricants, we have a wealth of processing achievements even with difficult-to-machine materials such as titanium and Inconel. 【Features】 ■ Outstanding cutting performance ■ Significant improvement in the working environment ■ High corrosion resistance for aircraft-grade aluminum ■ Certification from aircraft manufacturers ■ Environmentally friendly *For more details, please refer to the PDF materials or feel free to contact us.

• Cutting Oil

This is the lineup of water-soluble cutting oils suitable for aluminum alloys used in aircraft parts and semiconductor device components, including the MORESCO Tool Mate Series (R). Cutting oils are used in machine tools such as lathes, machining centers, and grinding machines to remove materials like metals and finish products. MORESCO develops long-life products that contribute to the reduction of waste liquid discharge and environmental improvement. 【Features】 ■ Emulsion type ■ Reduces stickiness, minimizing the stickiness of machines and products ■ Excellent preservative properties ■ Contributes to waste reduction with long life *For more details, please download the catalog or feel free to contact us.

• Lubricants
• Cutting Oil
• Oil-water separator