メイジ List of Products and Services

We would like to introduce a case where we proposed our products in response to the request to "eliminate the hassle of draining water and prevent freezing." The current issue faced by the customer was that the water in the tanks of the two on-site toilets, which are flush-type, was freezing. In response to this challenge, we proposed the installation of an A3-sized heater to prevent freezing. [Case Overview] ■ Issue - The water in the tanks of the flush-type on-site toilets is freezing. ■ Proposal - Install our A3-sized heater in the toilet tank to prevent freezing. *For more details, please refer to the PDF document or feel free to contact us.

• Aluminum heater

We would like to introduce a case study of the installation of an "A4 size heater" in Aomori Prefecture. We were struggling with the freezing of water inside an outdoor toilet tank at a construction site. After installation in the winter of 2022, there was no freezing even at an outside temperature of -15°C. When making an inquiry, please contact us and mention "I saw the toilet tank heater." 【Case Overview】 ■ Issues - Water inside the outdoor toilet tank freezes - Water drainage work is cumbersome ■ Results - No freezing even at an outside temperature of -15°C *For more details, please refer to the PDF document or feel free to contact us.

• Aluminum heater

We would like to introduce our "Solar Panel Heater." A film heater is attached to the inner surface of an L-shaped Galvalume steel plate (t0.35), and it is bonded with outdoor double-sided tape that also serves as insulation to the frame at the bottom of the PV. The surface of the panel is covered with waterproof tape to fill in any gaps. Please feel free to contact us if you would like to place an order. 【Features】 ■ Heats the frame when it becomes cold ■ Structure allows for drainage at the bottom *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This product is a heater that can accommodate all sizes. It achieves uniform temperature rise without temperature variations. It can be used to heat any circular area, regardless of whether it is for a toilet seat heater. Please feel free to consult us when you need assistance. 【Features】 ■ Instant response ■ Energy-saving ■ Uniform temperature rise ■ Compatible with circular shapes regardless of toilet seat ■ Custom sizes and applications available ■ Temperature settings adaptable for both outdoor and indoor situations ■ Switchable options *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce our "toilet seat heater." It features minimal temperature variation across the entire seat and provides uniform temperature rise, heating up to 20°C to 30°C within 8 seconds of being powered on. Please feel free to consult us when you need assistance. 【Features】 ■ Minimal temperature variation across the entire seat ■ Heats up to 20°C to 30°C within 8 seconds of being powered on *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This product is a heater that eliminates the need for snow removal from solar panels in snowy and cold regions. The film heater is a fully heating heater made of a special coating that generates heat when electricity is applied. Currently, the maximum length is 500mm, so for example, for a length of 2m, four pieces are connected. Please feel free to contact us when you need assistance. 【Features】 ■ Heats the frame that has become cold ■ Mechanism for drainage from the bottom *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce a case study of the installation of a horizontal gutter heater that we conducted. During the construction, the horizontal gutter was shorter than the planned installation location due to adjustments made to fit the house, which required cutting the gutter and changing the heater connection from three panels to two. When passing the wiring, we encountered a sparrow deterrent that obstructed the wiring, so we routed it through the groove section. 【Case Overview】 ■ Date of Implementation: April 13, 2022, from 9:00 AM to 3:00 PM ■ Purpose: To install a horizontal gutter heater on the first floor of Mr. S's residence (for winter snow melting and icicle prevention) *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce a case study on the installation of monitor cameras and changes to the control box settings. The footage of the roof snow melting heater can be observed in real-time on a PC inside the store. The condition of the roof can be checked on the monitor screen 24 hours a day. 【Overview】 <Objective> ■ Monitoring camera settings for the roof snow melting heater completed from November 9 to 11, 2022 ■ Installation of a snow melting mat and dedicated control box at the store entrance ■ Consolidation of wiring for the roof snow melting heater ■ Changes to the control box settings requested by the president *For more details, please feel free to contact us.

• Other heaters

We would like to introduce our "Roof Snow Melting Heater." It is available in sizes ranging from 297×210 to 2000×1000 mm, and the heating element can store heat at low temperatures, allowing for reduced electricity costs. By utilizing this product, snow removal work becomes unnecessary, eliminating the risk of injuries and accidents. Additionally, since there will be no snow accumulation on the roof, it helps prevent building collapses and the formation of icicles. There will also be no need to hire contractors for snow removal work. 【Features of the Heating Element】 - Even heat distribution - Instant heating capability - Can store heat at low temperatures, reducing electricity costs - Available sizes: 297×210 to 2000×1000 mm - On-site surveys available - Customized heater proposals for individual roofs - Surveillance camera installation possible upon request (to monitor roof conditions indoors) *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

We would like to introduce our "Heated Mesh Vest." Unlike disposable heat packs, this vest can be reused multiple times. Additionally, it can be layered, making it suitable to wear under work clothes, providing comfort during manufacturing processes and outdoor packing tasks. The standard size accommodates dimensions of 130 to 245 mm in both width and height. Please consult us if you have a specific size in mind. 【Features of the Heating Element】 ■ Provides uniform heat distribution ■ Instant warmth and sustained effect ■ Can store heat at low temperatures ■ Lightweight and easy to carry ■ Usable for a continuous maximum of 6 hours ■ Compatible with a 5V mobile battery ■ Equipped with a three-stage switch for temperature adjustment ■ Removable heater, which can be used independently ■ Available in two sizes: free size and XL *For more details, please refer to the PDF document or feel free to contact us.

• Heating device
• Other heaters

The flexible surface heating element "A4/A3 size heater" has achieved excellent thermal responsiveness. With a thickness of approximately 0.2mm to 0.6mm, it can be flexibly wrapped around various objects and can also be inserted into narrow gaps. It heats up to 120°C in about 60 seconds. 【Features】 - The heater surface heats uniformly with no temperature variation. - Achieves a thickness of approximately 0.2mm to 0.6mm. - Can be flexibly wrapped around and inserted into narrow gaps. - The A4 size heater heats up to 120°C in about 60 seconds with a DC power supply of 35V. - The A3 size heater heats up to 120°C in about 60 seconds with a DC power supply of 70V. - After turning off the power, it cools down to room temperature in about 120 seconds. - Compatible from 5V. *Regarding sample provision, it will be on a loan basis. For product details, please refer to the PDF document. For application opinions, please enter them in the "Inquiry Content" section of the contact button below.

• Heating device

The "A4A3 Size Heater" that we handle can be used as a buffet food warmer. It features a flexible surface heating element with a thickness of 0.2 to 0.6 mm, maintaining excellent thermal responsiveness. It can be adjusted to a suitable temperature for keeping warm, ranging from 42°C to 90°C. It can be used simply by placing it under the buffet dish you want to warm, connected to a battery, and is also suitable for keeping home-cooked dishes warm. 【Features】 ■ Flexible surface heating element ■ Thickness of 0.2 to 0.6 mm ■ Can operate at low voltage ■ Excellent thermal responsiveness ■ Adjustable to a suitable temperature for keeping warm, from 42°C to 90°C *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Snow Melting Entrance Mat" is a high-performance surface heater that is durable and suitable for use in places where a large number of people are expected to enter and exit. It features a calm color scheme that matches the surrounding environment, designed to resemble beautiful flooring materials. The surface is made of a glass-reinforced flat anti-slip sheet, making it less slippery. It excels in both normal walking and heavy walking applications, and can be widely used in outdoor warehouse ramps, entrances of nursing homes, hospitals, and more. 【Features】 ■ Excellent responsiveness for quick snow melting ■ Surface made of glass-reinforced flat anti-slip sheet, making it less slippery ■ Calm color scheme that matches the surrounding environment, designed to resemble beautiful flooring materials ■ Capable of melting snow accumulation exceeding 30 cm ■ Proven in heavy snowfall areas 2020: Entrance of the office in Kitakami City, Iwate Prefecture 2020: Company warehouse in Wakuya Town, Miyagi Prefecture 2020: Entrance of the office of a transportation company in Wakuya Town, Miyagi Prefecture 2020: Transport passage of a company in Wakuya Town, Miyagi Prefecture 2021: Stairs of a construction site office in Furukawa City, Miyagi Prefecture 2022: In front of a store in Nanyo City, Yamagata Prefecture 2022: Warehouse of a worksite in Hinohira, Aomori Prefecture *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters
• mat

The "Heat Mat 5V" is a high-performance surface heater that heats up to approximately 37°C using USB 5V. It is portable with a mobile battery, making it easy to carry anywhere. You can print your favorite logos or illustrations, such as company names, marks, or team names, and you can also change the product's color and size. Please feel free to consult us when you need assistance. 【Features】 ■ Heats up to approximately 37°C using USB 5V ■ Portable with a mobile battery ■ Can print company names, marks, team names, etc. ■ Color and size can also be changed *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "A4A3 Size Heater" we handle can be used as a cushion seat heater. It provides warmth at 36.5°C with 12V. It can also be used on car and motorcycle seats, and a cover seal can be applied. It remains warm even when used between the backrest, and since it is a standalone heater, it offers flexible usage options. 【Features】 ■ Warmth at 36.5°C with 12V ■ Remains warm even when used between the backrest ■ Flexible usage options as it is a standalone heater ■ Can be used on car and motorcycle seats, and a cover seal can be applied *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce the "A4A3 Size Heater" that we handle. The wiring connection method can be done by connecting a general flat connector to the flat connector part, and it can also be connected by soldering or screwing. The heating area is 210mm x 297mm for A4 size and 420mm x 297mm for A3 size. It can be used for various applications such as heating, keeping warm, and preventing condensation and freezing. 【Specifications (excerpt)】 ■External dimensions: A4 size 230mm x 317mm, A3 size 440mm x 317mm ■Heating area: A4 size 210mm x 297mm, A3 size 420mm x 297mm ■Weight ・A4 size: Laminating film thickness 32μ/11g, 100μ/32g ・A3 size: Laminating film thickness 32μ/19g, 100μ/37g *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The flexible surface heating element "A4/A3 size heater" has achieved excellent thermal responsiveness. With a thickness of approximately 0.2mm to 0.6mm, it can be flexibly wrapped around various objects and can also be inserted into narrow gaps. It heats up to 120°C in about 60 seconds. 【Features】 ■ The heater surface heats evenly with no temperature variation. ■ Achieved a thickness of approximately 0.2mm to 0.6mm. ■ Can be flexibly wrapped and inserted into narrow gaps. ■ The A4 size heater heats up to 120°C in about 60 seconds with a DC power supply of 35V. ■ The A3 size heater heats up to 120°C in about 60 seconds with a DC power supply of 70V. ■ After turning off the power, it cools down to room temperature in about 120 seconds. ■ Compatible from 5V. *For more details, please request materials or view the PDF data from the download.

• Heating device

The "Heat Mat 5V" is a high-performance surface heater printed with heat-generating paint using screen printing technology. It operates on USB (5V) and generates heat up to approximately 37°C on the surface. Please feel free to consult us if you have any requests. 【Product Specifications】 ■ Weight ・ Main unit: 15.7g ・ Including cable 900mm: 38g ■ External dimensions: 135mm × 250mm × thickness 0.6mm ■ Heating area in heating state: 100mm × 200mm *For more details, please download the PDF or feel free to contact us.

• Other heaters

We offer a high-performance surface heating heater that efficiently generates heat over a surface, in collaboration with Fabtech Co., Ltd. This product is the high-performance surface heater "Snow Melting Entrance Mat." When used at an outside temperature of -5°C, it can raise the surface temperature to about 30°C in approximately 20 minutes. It can also generate an additional 30°C of heat depending on the environmental temperature. Moreover, it starts melting snow in a shorter time compared to conventional heating heaters, contributing to the SDGs. 【Features】 ■ High performance ■ Surface heating ■ Anti-slip ■ Customizable size *For more details, please download the PDF or feel free to contact us.

• Other heaters