T&Gヒーター List of Products and Services

The "Silicone Rubber Heater" we handle is a thin sheet with a standard thickness of 1.5mm, which excels in thermal responsiveness. It fits curved surfaces such as cylindrical and conical shapes, as well as flat surfaces, allowing for efficient heat conduction to the target object. The heating element uses nickel-chromium alloy resistors and etched elements, ensuring stable heat generation. For flat shapes, we can design various special shapes such as circular, perforated, and irregular shapes to match the form of the target object. 【Features】 ■ Flexible material ■ The silicone rubber used is heat-resistant and electrically insulating ■ High-quality, high-performance heaters can be produced from a single unit ■ Designed for desired voltages from low voltage up to 240V ■ SR type: continuous use heat resistance temperature of 200℃, HT type: continuous use heat resistance temperature of 260℃ <Custom Silicone Rubber Heater (Order Made 5)> - You can select optional accessories for the heater in your desired size. - Shipment can be made as early as the 5th day after order placement. * There are limitations and selectable ranges for heater size, electrical capacity, and optional accessories. For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

We handle "Silicone Rubber Heaters (Standard Stock Items Rectangular/Circular)." The material type for the "Standard Stock Item Rectangular" 100V specification is SR type (heat-resistant up to 200°C), with a power density of 0.8W/cm². Additionally, the "Standard Stock Item Circular" 100V specification in standard sizes features a 300mm glass-braided silicone lead wire, which is extracted outward. We can ship as early as the day after your order date. Please feel free to contact us. 【Features】 <Standard Stock Item Rectangular (100V Specification)> ■ Material type is SR type (heat-resistant up to 200°C) ■ Power density is 0.8W/cm² (1.0W/cm² for 25mm×50mm) ■ Glass-braided silicone lead wire: 300mm extracted outward from the center of width A dimension ■ Orders of 10 or more will require separate consultation *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

We would like to introduce our "Silicone Rubber Heater (Custom Made 5)." It is possible to ship as early as the 5th day after your order. You can choose accessory options for the heater in your desired size. We offer a variety of options, including "with double-sided tape," "with K-type thermocouple," and "with fixed temperature thermostat." Please feel free to consult with us. 【Features】 ■ Possible to ship as early as the 5th day after your order ■ Choose accessory options for the heater in your desired size ■ For 100V: 10W to 2000W, but power density must be below 0.8W/cm2 ■ For 200V: 20W to 3200W, but power density must be below 0.8W/cm2 ■ Silicone lead wire lengths: choose from 300mm, 500mm, or 1000mm (same unit price) *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

We handle "Silicone Rubber Heaters (Custom Products)." We offer various optional accessories and will propose appropriate specifications based on your usage purposes, conditions, and installation methods. We have a rich lineup including "Silicone Varnish Waterproof Type," "Etching Element Type," "Irregular R Processing Type," and "Can Heater YGSN Type (Custom Specification)." Please feel free to contact us. 【Partial Lineup】 ■ SR Type (Custom Specification) ■ HT Type (Custom Specification) ■ With Double-Sided Tape (100°C Heat Resistant, 200°C Heat Resistant) ■ With K Thermocouple *For more details, please refer to the PDF materials or feel free to contact us.

• Silicon Heater

The "Can Heater (YGSN Type Standard Stock Item)" is a spring-fixed type product that allows for easy attachment and detachment to the target container. We offer a wide range of products including "Drum Can Heaters," "Pail Can Heaters," "One-Pound Can Heaters," and "4L Square Can Heaters." It features a safety design compliant with PSE standards and comes with a temperature controller. Please feel free to contact us when placing an order. 【Features】 ■ Easy attachment and detachment to the target container with spring fixation ■ Simple and compact design ■ Comes with a temperature controller ■ The YGSN-4L-Sq type includes a tightening adjuster, making it usable with two types of 4L cans ■ Custom sizes available *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

The "Can Heater (Type F)" is designed to be simple and compact, featuring a heating lamp that allows for easy confirmation of heating status at a glance. It is an industrial limited product that is not PSE compliant, and custom sizes can also be produced. The silicone rubber heater is baked onto the heating plate, allowing for direct attachment to the side of the can, resulting in high thermal efficiency. Additionally, we also offer the "F Type Drum Can Heater (monoOne-120T equipped model)" which enables more precise heating and insulation. 【Features】 ■ Made to order, industrial limited product not PSE compliant ■ Designed to be simple and compact ■ Heating lamp included for easy confirmation of heating status ■ Custom sizes can also be produced *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

The "Cylinder Heater" is a product equipped with a silicone sponge for insulation. It comes with a temperature controller, but if advanced temperature control is needed, it can be replaced with a digital temperature controller separately. The heating lamp indicates at a glance that heating is in progress. You can choose based on cylinder size and operating voltage. Please feel free to contact us when you need assistance. 【Specifications Example (Excerpt)】 <Applicable Cylinder: 10L> ■ Rated Voltage: 100V/200V ■ Load Power: 450W ■ Heater Dimensions: 435mm × 400mm *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Tokyo was to "heat the fine piping of the factory production line," and "since we want to efficiently warm the piping with a specification that allows for easy attachment and detachment, we would like a rubber heater with insulation to prevent heat loss." In response, we proposed an R-shaped type heater that can be bent to fit fine piping. Additionally, with a Velcro fastening specification, it can be easily attached and detached, and by integrating a silicone sponge, it became possible to efficiently warm the piping. [Case Overview] ■ Request We want a specification that allows for easy attachment and detachment, and we would like a rubber heater with insulation to prevent heat loss for efficiently warming the piping. ■ Proposal We proposed an R-shaped type heater that can be bent. [Proposed Product] ■ Custom Product: R-shaped, Velcro fastening type The heater was fixed using Velcro to fit cylindrical objects due to the R-shaping. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company K in Kyoto Prefecture was, "We would like to adopt silicone rubber heaters for our equipment, but the operating temperature is around 250°C. I have heard that the heat resistance of silicone is generally around 200°C; is it possible to accommodate this?" In response, we proposed our stock high-temperature silicone material (with a continuous use temperature specification of 260°C) silicone rubber heater. Our company can manufacture custom products using silicone materials that can withstand high-temperature applications. 【Case Overview】 ■ Request - We want to adopt silicone rubber heaters for our equipment, but the operating temperature is around 250°C. - I have heard that the heat resistance of silicone is generally around 200°C; is it possible to accommodate this? ■ Proposal We proposed a silicone rubber heater made from our stock high-temperature silicone material (with a continuous use temperature specification of 260°C). 【Proposed Product】 ■ Custom Product HT Type (Heat Resistance 260°C Specification) This is a silicone rubber heater made using a material type suitable for high-temperature applications (non-UL certified). For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case that was proposed in response to our customer's concerns and requests. The request from Company H in Tokyo was, "The silicone rubber heater we were using has broken and is no longer usable. If the heater is not operational, it will hinder our business, so we would like it shipped as soon as possible." Since it was a specification that could be handled with our standard stock items, we were able to ship it the day after the order was placed. Our company has a wide range of standard stock items available, allowing for prompt responses. [Case Overview] ■ Request - The silicone rubber heater we were using has broken and is no longer usable. - If the heater is not operational, it will hinder our business, so we would like it shipped as soon as possible. ■ Result - Since it was a specification that could be handled with standard stock items, we were able to ship it the day after the order was placed. - We have a wide range of standard stock items available, allowing for prompt responses. [Proposed Product] ■ Silicone Rubber Heater - Standard Stock Item This is a silicone rubber heater of a standard size. It can be shipped the day after the order is placed at the earliest. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. Company M in Tokyo had a request stating, "Due to quality issues arising from temperature drops in the piping within the factory production line, we would like to insulate the piping line as a whole." In response, we provided the piping spool diagram and designed and manufactured the heater from scratch. Our company can handle the entire piping line as well. 【Case Overview】 ■ Request Due to quality issues arising from temperature drops in the piping within the factory production line, we would like to insulate the piping line as a whole. ■ Proposal We provided the piping spool diagram and designed and manufactured the heater from scratch. 【Proposed Product】 ■ Custom Product: Piping Unit Heater We can also handle the heater for the piping unit as a whole. *In the case of special piping, you may need to provide the piping. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Kanagawa Prefecture was, "We want to heat and maintain the temperature of a pot containing chocolate, but it is essential that the pot can be easily detached for cleaning after use." In response, we proposed the "Hook-Spring Type" mounting method, which allows for easy fixation with a spring and enables detachment. This method is relatively inexpensive and has gained support from many customers. 【Case Overview】 ■ Request - We want to heat and maintain the temperature of a pot containing chocolate. - It is essential that the pot can be easily detached for cleaning after use. ■ Proposal We proposed the Hook-Spring Type mounting method, which allows for easy fixation with a spring and enables detachment. 【Proposed Product】 ■ Custom Product: Hook-Spring Type This specification involves attaching a hook to the heater surface and securing it with a spring. It is ideal for heating and maintaining the temperature of cylindrical shapes and tank peripheries. If the heater needs to be removed, it can be easily detached. *For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. Company S was facing the issue of "storing oil-filled drums in the factory, but they become solid in winter, making them difficult to handle." In response, we proposed the use of our standard product, the "F-type drum heater." The customer reported that handling has become much easier since there is no longer any freezing in winter. 【Case Overview】 ■Challenge Storing oil-filled drums in the factory, but they become solid in winter, making them difficult to handle. ■Proposal Proposed the use of our standard product, the F-type drum heater. ■Result No more freezing in winter, making handling much easier. 【Proposed Product】 ■F-type Drum Heater The silicone rubber heater is baked onto a heat plate, allowing for direct attachment to the side of the drum, resulting in high thermal efficiency. The silicone rubber heater and temperature controller are integrated, making it lightweight and easy to attach to the drum with a single touch. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company H in Aichi Prefecture was, "We want to quickly prototype the introduction of silicone rubber heaters for our own equipment, but it does not fall under the standard stock lineup. Additionally, we would like to install a K thermocouple for temperature control." We offer "Custom Made 5," which allows for short lead times even for heater sizes outside of standard stock items. We installed the optional K thermocouple and were able to ship within the shortest time frame of 5 days after receiving the order. 【Case Overview】 ■ Request - We want to quickly prototype, but it does not fall under the standard stock lineup. - We would like to install a K thermocouple for temperature control. ■ Result We installed the optional K thermocouple and were able to ship within the shortest time frame of 5 days after receiving the order. 【Proposed Product】 ■ Silicone Rubber Heater Custom Made 5 You can select optional accessories for the heater in your desired size. * There are limitations and selectable ranges for heater size, electrical capacity, and optional accessories. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Tokyo was, "We want to heat the components of semiconductor manufacturing equipment. Given the industry standards, high-quality and management are required; can you accommodate this?" Our company has been manufacturing silicone rubber heaters for semiconductor manufacturing equipment for many years. We have the know-how and experience to produce high-quality heaters under strict management. 【Case Overview】 ■Request - We want to heat the components of semiconductor manufacturing equipment. - High-quality and management are required. ■Result - We have been manufacturing silicone rubber heaters for semiconductor manufacturing equipment for many years. - We have the know-how and experience to produce high-quality heaters under strict management. 【Proposed Product】 ■SR Type (Custom Specification) This is a silicone rubber heater made using our standard material type (UL certified). It will be manufactured to the specified heater size and rating. *Continuous use temperature: 200℃, Maximum use temperature: 230℃ For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case that was proposed in response to our customer's concerns and requests. The request from Company Y in Tokyo was, "Can you manufacture a rubber heater that fits a square-shaped part that other companies have refused to work on?" With our expertise, we were able to realize the production of a heater that is bent to fit a square shape. 【Case Overview】 ■ Request We would like you to manufacture a rubber heater that fits a square-shaped part. ■ Result We successfully produced a heater that is bent to fit a square shape. 【Proposed Product】 ■ Custom Product - Irregular Shape R Processing Type We can perform bending to fit not only cylindrical shapes but also irregularly shaped heating targets. * Depending on the shape, you may need to provide the heating target. * If it is difficult to provide, there may be a need for a shape jig fee. * In cases where it is difficult to fit the shape, it may not be covered by warranty. For more details, please refer to the related links or feel free to contact us.

• Other heaters

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company P in Aichi Prefecture was, "We want to heat the metal plates, which are components of our products, with silicone rubber heaters, but due to quantity and technical difficulties, we would like to request the adhesive application for the heaters." We received the customer's components and processed them by applying the heaters at our company. We carefully adhered and baked each component provided by the customer. 【Case Overview】 ■ Request It is difficult for the customer to apply the heaters due to quantity and technical issues. ■ Result We received the customer's components and processed them by applying the heaters. Each piece was carefully adhered and baked. 【Proposed Product】 ■ Custom Product - Plate Adhesion Type This specification involves the adhesive application of heaters to the metal plates provided by the customer. *Please note that adhesive application may not be possible depending on the shape of the plates. For more details, please refer to the related links or feel free to contact us.

• Other heaters

The "Ribbon Heater (Standard Stock Item)" is a product in which a glass-covered heating element is sewn onto glass cloth and further wrapped in glass cloth. It is flexible, lightweight, and easy to handle, allowing it to be wrapped around complex shapes such as pipes, valves, and tanks for heating and insulation. The maximum temperature for standard products is 400°C, and if necessary, we can also produce high-temperature versions using silica fiber (maximum temperature 700°C). Please feel free to consult us. 【Features】 ■ Made to order ■ Ribbon-shaped heater ■ Flexible, lightweight, and easy to handle ■ Maximum temperature for standard products: 400°C ■ Standard specifications: 100V (200V versions can also be produced) *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "Space Heater (Standard Stock Item)" is a product that uniformly wraps heating wires around an insulating material, further insulated with heat-resistant mica sheets, and sandwiched between metal plates. By closely adhering it to surfaces such as metal, efficient heating is possible. This versatile product is widely used as an industrial heater for many applications, primarily in molds and heating plates. 【Features】 ■ Flat plate heater ■ Efficient heating possible by closely adhering it to surfaces such as metal ■ Highly versatile, used for many applications as an industrial heater ■ Exterior: Bonded steel plate (zinc-coated steel plate) ■ Maximum operating temperature: 300℃ (heater surface) ■ Lead wire: Glass tube coated *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "Flat Mica Heater" is a product that sandwiches a heating element made of stainless steel foil between mica (a type of insulation material). With a high watt density and a thickness of about 1mm, it allows for rapid heating and cooling. Additionally, due to its planar heating element, it achieves a uniform temperature distribution, and it has a large contact area with the heated object, resulting in excellent heating efficiency. It can be manufactured in various shapes, including hole drilling, notching, and circular processing. 【Features】 ■ Fast response ■ Good heating efficiency ■ Uniform temperature distribution ■ Can be made in various shapes ■ Maximum operating temperature: 350℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce our "various types of silicone sponges, sheets, and tubes." Starting with the "caterpillar sponge," which is suitable for wrapping around cylindrical objects, we also offer a rich lineup including "molded sponge (elbow)," "silicone sponge processed products (for clamps)," and "flame-retardant silicone sponge (SE-800: black)." Our company has introduced cutting equipment that can accurately cut even stretchable silicone sponges, allowing for processing into various shapes and sizes. Please feel free to contact us when you need assistance. 【Features】 ■ Silicone Sponge (Low Foam / High Foam) - Sheet-type insulation material (sponge) - Excellent thermal insulation, heat retention, and resilience ■ Flame-retardant Silicone Sponge (SE-800: black) - UL certified *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

The "monoOne-120" is a digital temperature controller that can monitor the temperature of the heated object, allowing operators to use it with peace of mind. With a simple, safe, and compact design, it is compatible with almost all sensors except thermistors. By attaching a stand, it becomes easier to operate while seated. It features an ON/OFF timer with a maximum of 100 hours and is also compatible with DIN rail mounting (optional). Please feel free to contact us if you need assistance. 【Features】 ■ RoHS2 compliant ■ Made in Japan, available for immediate delivery ■ Easy for anyone to use ■ Monitors the temperature of the heated object ■ Compatible with DIN rail mounting (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

The "monoOne +B/+W" is a digital temperature controller that can monitor the temperature of the heated object, allowing operators to use it with peace of mind. It is a handheld, multifunctional, and high-performance model focused on safety. It comes with a temperature sensor, so you can start using it right away. The "monoOne +B" is compatible with 100V and 200V, while the "monoOne +W" is compatible with 100V low current. With a short circuit protection feature, it helps avoid the risk of circuit damage due to overcurrent. It also supports DIN rail mounting (optional). Please feel free to contact us if you need assistance. 【Features】 ■ RoHS2 compliant ■ Made in Japan, available for immediate delivery ■ Easy to use for anyone ■ Monitors the temperature of the heated object ■ Supports DIN rail mounting (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

We would like to introduce our digital temperature controller, the 'monoOne-200'. By combining a temperature controller with a 2-degree-of-freedom PID control method and an SSR with a cycle control unit, we achieve highly accurate temperature control with minimal noise generation. The exhaust fan operates automatically based on ambient temperature and usage time, which helps to suppress the internal temperature rise of the device while also providing excellent low noise performance. 【Features】 ■ RoHS compliant, made in Japan ■ Large capacity of 30A ■ Sophisticated design ■ Automatic operation of the exhaust fan based on ambient temperature and usage time ■ Excellent low noise performance while suppressing internal temperature rise *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

The "KE-45T" that we handle is a heat-resistant silicone adhesive (Shin-Etsu Silicone one-component RTV rubber) that can be applied simply by extruding from a tube. It adheres well to most materials as it cures, making it suitable for various applications. After curing, it absorbs vibrations and impacts with excellent rubber elasticity. In addition, we also offer "KE-3418," which has a relatively fast surface contact drying time and is non-corrosive to metals. Please feel free to contact us. 【Features】 ■ Can be applied simply by extruding from a tube ■ Becomes a rubber elastomer after curing ■ Adheres well to most materials as it cures ■ Excellent electrical properties such as dielectric strength and resistance ■ Absorbs vibrations and impacts with excellent rubber elasticity after curing *For more details, please refer to the PDF materials or feel free to contact us.

• glue