関西電力送配電 List of Products and Services

We would like to introduce the "Accelerated Weathering Test Equipment" that we handle. It achieves a level of accelerated degradation equivalent to one year of UV exposure from sunlight in a short period of time. There is extensive support from our technical staff, who possess various know-how and expertise. We have several types of accelerated weathering test equipment, each with different features, allowing us to conduct tests tailored to our customers' needs. Additionally, after the weathering tests, we can also perform additional tests and performance evaluations in a centralized manner. 【Testing Equipment and Applicable Standards】 ■ Sunshine Weather Meter - JIS B 7753, JIS D 0205, JIS E 4037, JIS K 7350-4, etc. ■ Super Xenon Weather Meter - ASTM G 155, ISO 4655, JIS K 6266, JIS E 4037, ISO 4892-2, JIS K 7350-2, ISO 16474-2, JIS K 5600-7-7, etc. ■ Metering Weather Meter - No applicable standards (however, it can emit stronger UV radiation compared to other devices, enabling accelerated degradation in a shorter time) *For more details, please download the PDF or feel free to contact us.

• Weather resistance test

Kansai Electric Power Transmission and Distribution offers contracted testing services. In addition to power equipment, we have a wide variety of testing devices that can confirm the quality of general consumer goods, allowing us to understand the condition of samples from various aspects. Our specialized staff can provide various advice and support, including identifying the causes of defects and consulting services. We can accommodate not only electrical performance testing but also environmental testing and material analysis testing. Please request contracted testing services from Kansai Electric Power Transmission and Distribution. *For a list of testing devices, please refer to the materials available for download in PDF format.

• Contract Inspection

Our company uses a "low-voltage short-circuit testing device" to evaluate not only the current resistance performance of products but also, by combining additional measuring instruments, the temperature rise characteristics of products under overcurrent conditions. We also have an explosion-proof chamber, allowing us to safely conduct tests in cases where there is a risk of sample dispersion due to high currents. Additionally, we are equipped with high-speed cameras to observe the samples without missing a moment. Of course, we provide robust support from technical staff with various know-how and expertise. Please feel free to contact us if you have any requests. 【Features】 ■ Capable of applying excessive current to samples ■ Various low voltages can be output by changing the wiring of the device ■ Temperature rise of samples can be monitored by combining measuring instruments *For more details, please download the PDF or feel free to contact us.

• Public Testing/Laboratory

In our "Contract Testing and Testing Equipment Rental Service," we measure the performance and condition of your samples and products using a variety of testing equipment. We strive to maintain and improve quality and performance. In addition to contract testing, where we conduct tests and investigations on the items entrusted to us, we also offer rental of equipment that allows customers to perform tests themselves. If you have concerns such as, "I want to evaluate the performance of a product, but I don't know where to do it," "The testing equipment is aging, but updating it is costly," or "Development is not going well in areas where I lack knowledge and experience," please feel free to contact us. Our specialized technical staff will provide comprehensive support. *Please view the list of equipment in the materials available for "PDF Download."

• Contract Inspection

The "Metering Weather Meter" is a super-accelerated weather resistance testing machine that uses metering lamps to irradiate test specimens with powerful ultraviolet light. It irradiates samples with approximately eight times the illuminance of a Sunshine Weather Meter, making it possible to reproduce degradation in a short time. It can be used for early product evaluation and is gaining attention in industries such as automotive, construction, coatings, and resins for its acceleration capabilities. 【Features】 ■ Irradiates test specimens with powerful ultraviolet light using metering lamps ■ Capable of reproducing degradation in a short time ■ Used for early product evaluation ■ Allows comparative evaluation of materials in product development *For more details, please refer to the PDF document or feel free to contact us.

• Weather resistance test

Our technology testing center offers "contract testing" services. We accept samples for testing, conduct the tests, and prepare reports. Additionally, we provide equipment rental, allowing customers to use the testing equipment themselves. The technology testing center has accumulated various insights and know-how gained from quality assurance, performance testing, and defect investigation, and is equipped with specialized testing, analysis, and measurement devices. We hope you find it useful. [Overview] ■ Contract Testing: We accept samples for testing, conduct the tests, and prepare reports. ■ Equipment Rental: Customers can use the testing equipment themselves. *For more details, please refer to the PDF document or feel free to contact us.

• Contract Inspection

Our technology testing center conducts "contract defect investigations." Based on the initial investigation results such as visual inspections of defective products, we provide tailored advice to our customers regarding the "direction of the investigation" and "possible failure modes" based on our past knowledge. By using our own testing equipment for investigations, we examine the site and its size to identify the causes, clarify the defect mechanisms, and propose appropriate measures to prevent recurrence, as well as conduct residual life assessments tailored to our customers. 【Overview】 ■ Advisory: We provide advice based on the initial investigation results of defective products. ■ Cause Investigation: We investigate using our own testing equipment to clarify defect mechanisms. ■ Consulting: We implement proposals for appropriate recurrence prevention measures and conduct residual life assessments. *For more details, please refer to the PDF materials or feel free to contact us.

• Contract Inspection

The "Metering Weather Meter" is a super-accelerated weather resistance testing machine that irradiates test specimens with powerful ultraviolet light using a metering lamp. It irradiates the sample with approximately eight times the illuminance of a Sunshine Weather Meter, making it possible to reproduce degradation in a short period of time. It can be used for early product evaluation. Additionally, it allows for comparative (relative) evaluation of materials in product development. 【Features】 ■ Implemented in industries such as automotive, construction, coatings, and plastics, with its acceleration properties attracting attention. ■ Enables comparative (relative) evaluation of materials in product development. *For more details, please refer to the PDF document or feel free to contact us.

• Weather resistance test

Our insulation withstand voltage testing equipment can investigate the dielectric strength performance of high-voltage or extra-high-voltage devices and measure the insulation breakdown voltage. It can apply a maximum voltage of approximately 200kV/60kVA. Additionally, by switching the main transformer, auxiliary transformer, and taps, a wide range of voltages can be output, and in combination with a water spraying test device, tests can also be conducted in a water-spraying condition. 【Do you have any of the following concerns?】 ◆ Looking for a testing facility to evaluate dielectric strength performance ◆ Lacking the necessary equipment for withstand voltage tests and insulation breakdown tests, or the specifications of the equipment you have are insufficient ◆ No know-how or insights on how to improve dielectric strength performance Specialized staff with know-how and insights will provide support. For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Low Voltage Short Circuit Test Device" that we handle. This device intentionally creates a short circuit to apply excessive current to the sample. The test voltage can accommodate a wide range of voltages, and in three-phase configurations, both delta and star connections can be set arbitrarily, allowing for voltage output. Additionally, since there is a risk of the sample being damaged and scattering due to the short circuit, the sample is installed inside an explosion-proof chamber. 【Features】 ■ In addition to overcurrent testing of electrical products and short-duration current withstand testing, it is capable of reproducing failure events caused by overcurrent, continuous current testing, and combustion tests of electrical products that simulate tracking. ■ Testing can be conducted without considering the impact of sample scattering. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Shock Voltage Generation Device" is a device that can apply standard impulse voltage in accordance with JEC 0202-1994 to products. It is capable of outputting lightning impulse voltage and chopping wave impulse voltage. Shock voltage refers to a voltage that appears transiently for a short time, rising quickly from zero to its peak value and then gradually decreasing from the peak value. 【Device Performance】 ■ Generated Voltage: 80kV to 400kV ■ Test Waveform: DC (Pulse) ■ Maximum Energy: 12.5kWs ■ Polarity: Positive or Negative ■ Sample: Maximum load capacitance of 5nF or less * For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Commercial Frequency Dielectric Strength Test Equipment" is a device that boosts commercial power supply voltage through a transformer and applies high voltage to the sample. It applies an AC voltage of up to 50kV to confirm that there is no insulation breakdown in the product. Additionally, this testing device is equipped with a water tank and electrodes, allowing for dielectric strength testing of insulation protective equipment and similar items. 【Device Specifications】 ■ Rated Voltage: 0–50kV ■ Rated Capacity: 10kVA ■ Rated Current: 0.2A ■ Test Duration: 0–15 minutes ■ Voltage Increase Speed: 0.3kV/s to 2.9kV/s *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

This device is a compactly designed high-resolution computer tomography inspection system. It is suitable for inspecting small to medium-sized parts and allows for non-destructive examination of products. It is equipped with the capability to perform helical CT scanning and reconstruction, enabling the acquisition of clear images with high magnification from top to bottom, even for elongated samples. Additionally, the virtual rotation axis function, which allows for the selection of the scan's rotation center, facilitates observation and can shorten inspection time. 【Device Specifications (Partial)】 ■Sample Size: φ300×H500mm, Weight 30kg ■X-ray Tube - Nano-focus transmission X-ray tube (190kV 80W) - High-power micro-focus X-ray tube (225kV 320W) ■Detector: 16-bit flat panel *For more details, please refer to the PDF document or feel free to contact us.

• X-ray inspection equipment

The "Insulator High-Frequency Generation Device" applies high-frequency voltage generated by a Tesla coil method to the insulator to forcibly create a discharge, confirming the presence or absence of internal cavities. To detect insulation breakdown (internal penetration) within the insulator, it is necessary to apply electrical stress higher than commercial frequency voltage. With this testing device, it becomes easy to detect defects in insulators by applying high voltage and high frequency. 【Device Specifications】 ■ Power capacity: Approximately 2kVA ■ Output voltage: Maximum 200kV ■ Output frequency: 150kHz to 200kHz *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Super Xenon Weather Meter" is a weathering test machine that uses a xenon lamp as its light source and complies with various standards such as ISO, ASTM, and JIS. It is capable of conducting tests with energy levels approximately three times that of sunlight, and high-precision testing is possible through temperature control using a cooling device. Additionally, the long-arc lamp with a long discharge electrode distance allows for uniform irradiation over a wide area of the test specimen surface. 【Features】 ■ A light source that closely approximates the spectral irradiance distribution of sunlight from ultraviolet to visible light ■ Maintains correlation with outdoor exposure tests ■ High-brightness testing to enhance acceleration is also possible ■ Various test conditions can be set by combining filters *For more details, please refer to the PDF materials or feel free to contact us.

• Weather resistance test

We would like to introduce our "Thermal Shock Testing Equipment." By alternately immersing samples in hot and cold water at regular intervals, this thermal shock test provides rapid temperature changes, allowing for the durability evaluation of products such as ceramics. The operating temperature range is from -20°C to room temperature for the low-temperature section, and from room temperature to 100°C for the high-temperature section. Please feel free to contact us if you have any inquiries. 【Equipment Performance (Partial)】 ■ Operating Temperature Range - Low-Temperature Section: -20°C to Room Temperature - High-Temperature Section: Room Temperature to 100°C ■ Method - Low-Temperature Section: Single-Stage Compression Refrigeration Method - High-Temperature Section: Electric Heater Heating Method *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Gas Corrosion Test Device" is an apparatus that can conduct tests specified by JIS standards to evaluate the corrosion resistance of electronic components, plating, and more. The type of gas used is sulfur dioxide (SO2) only, with a concentration range of 0.1 ppm to 200 ppm. The device features a mechanism to prevent condensation within the facility, allowing for stable gas concentration and temperature/humidity. Additionally, by programming the test cycle, it can perform automatic operation with any desired cycle. 【Features】 ■ Capable of stabilizing gas concentration and temperature/humidity ■ Automatic operation can be performed with any desired cycle by programming the test cycle *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Sunshine Weather Meter" that we hold. It uses a Sunshine Carbon Arc as the light source, providing excellent test reproducibility with a stable spectral radiation intensity distribution. This device is used to assess the durability and degradation state of products and materials used outdoors. 【Features】 ■ Complies with many standards, including JIS and ISO ■ Test results contribute to the technological development of various products and materials *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Tabletop Scanning Electron Microscope" is a microscope that scans the surface of a sample with a finely focused electron beam in a vacuum, detecting information that comes from the sample and displaying it in an enlarged form. It has a much higher resolution than optical microscopes, making it suitable for surface observation and checking surface irregularities at the micro level. In addition to surface observation, it is also possible to confirm what elements are present on the sample surface and in what quantities through EDS elemental analysis using an X-ray detector. 【Features】 ■ Effective for samples that are difficult to process or that need to be observed as they are ■ Can accommodate samples up to a maximum size of W100mm × D100mm × H40mm on the testing stage ■ By utilizing a user-centric holder, tilting and rotation of the sample is possible ■ Suitable for surface observation and checking surface irregularities at the micro level ■ EDS elemental analysis using an X-ray detector allows for confirmation of what elements are present on the sample surface and in what quantities *For more details, please refer to the PDF document or feel free to contact us.

• Electron microscope

We would like to introduce our testing device, the "Water Injection Pressure Testing Device." It can be used as a water injection device for waterproof testing and water injection dielectric strength testing of outdoor distribution materials. It is linked with the insulation resistance testing device, allowing for automatic operation through a computer interface as well as manual operation via push buttons on the control panel. Additionally, after spraying water using a shower nozzle or spray gun, it can apply a specified voltage for a set period of time to determine whether the material can withstand it. 【Operating Performance】 ■ Applied Voltage: 0–33kV ■ Water Injection Rate: 3mm/min–20mm/min ■ Water Injection Direction Controller Drive Angle: Up and Down 90°, Left and Right 90° ■ Test Reagents: Tap water, sodium chloride (saltwater), etc. 【Applicable Standards】 - Waterproof testing equivalent to IPX3 testing *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "AC Standard Voltage and Current Generator for Indicating Instruments." It is primarily used for calibration testing of Class 0.5 measuring instruments. It can generate AC voltage and AC current at 50Hz/60Hz with an accuracy of ±0.1%. You can set the maximum output voltage or maximum output current, and it is capable of arbitrary division outputs up to 15 segments. Additionally, with just one switch operation, you can freely raise or lower the output at a constant sweep speed of approximately 16 seconds. 【Features】 ■ Arbitrary division outputs up to 15 segments are possible ■ Freely raise or lower the output at a constant sweep speed of approximately 16 seconds ■ The sweep function allows for "catch" testing of pointer indicating measuring instruments *For more details, please refer to the PDF document or feel free to contact us.

• Ammeter
• Testing Equipment and Devices

We would like to introduce the "Power Quality Analyzer" that we hold. The measurement lines include single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire, and it is an analysis device that monitors/records electrical anomalies and can quickly identify the cause when an anomaly occurs. Additionally, it can simultaneously capture phenomena related to power supply troubles (voltage drops, flicker, harmonics, etc.) with a single unit. 【Device Specifications】 ■ Measurement Lines: Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire, Three-phase 4-wire ■ Voltage Range: ch1-3: 600Vrms ■ Current Range: AC500mA to 6000A *For more details, please refer to the PDF materials or feel free to contact us.

• Logic Analyzer

We would like to introduce our "AC Meter Testing Equipment," which is part of our owned facilities. This equipment is used for the calibration testing of single-phase and three-phase AC meters (voltage meters, current meters, power meters, power factor meters). The AC voltage ranges from 3V to 750V, and the AC current ranges from 0.1A to 300A. Please feel free to contact us when you need assistance. 【Equipment Specifications】 ■ Output - AC Voltage: 3V to 750V - AC Current: 0.1A to 300A ■ Testing Range: Single-phase and three-phase *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "High Voltage Tester" that we hold. The output is a direct current voltage of 0 to 100 kV (negative polarity), capable of high voltage and extra high voltage insulation resistance testing and insulation diagnosis testing. The output accuracy is within ±2%. Please feel free to contact us when you need assistance. 【Device Performance】 ■ Output: Direct current voltage 0 to 100 kV (negative polarity) ■ Output Accuracy: Within ±2% - The input impedance of the recording device should be 1 MΩ or higher. *For more details, please refer to the PDF document or feel free to contact us.

• Other electric meters
• Testing Equipment and Devices

We would like to introduce the "Shock Voltage Generator 2" that we hold. It can apply standard impulse voltage (positive and negative polarity) in accordance with JEC 0202-1994 to the test specimen, and testing is possible at a maximum of 640kV. Additionally, testing with the specimen suspended is also possible. The generated voltage ranges from 160kV to 700kV, with the test waveform being DC (pulse) and a maximum energy of 5kWs. 【Device Performance】 ■ Generated Voltage: 160kV to 700kV ■ Test Waveform: DC (Pulse) ■ Maximum Energy: 5kWs ■ Polarity: Positive or Negative ■ Sample: Maximum load capacitance of 5.3nF or less *For more details, please refer to the PDF document or feel free to contact us.

• Voltage Meter
• Testing Equipment and Devices

We would like to introduce our "Tracking Erosion Test Equipment" that we possess. Testing according to the "Tracking Erosion Test" in accordance with IEC 61109 or IEC 62217 is possible for the test samples. Additionally, it is also possible to measure the current flowing through the test samples. Please feel free to contact us when you need our services. 【Equipment Performance】 ■ Maximum Output Voltage: 18kV ■ Fog Chamber Volume: 10m³ ■ Sample Arrangement: Horizontal and Vertical Arrangement ■ Fog Discharge Rate: 1.5ml/h to 2.0ml/h (adjustable by changing the sprayer) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Contamination Test Equipment" that we possess. This equipment can perform artificial contamination tests on test samples in accordance with JEC 0201 "AC Voltage Insulation Test," and it is also capable of measuring the current flowing through the test samples in a salt spray environment. The applicable standard is the AC voltage insulation test of JEC 0201. The spray rate ranges from 1.0 mm/min to 3.0 mm/min (intermittent spraying is possible). 【Equipment Performance】 ■ Maximum Generated Voltage - 22kV (Maximum generated voltage: 18kV) - 77kV (Maximum generated voltage: 65kV) ■ Spray Rate: 1.0 mm/min to 3.0 mm/min (intermittent spraying is possible) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Constant Temperature and Humidity Chamber (Small)" that we have in our possession. The temperature range is -40° to 100°C, and the humidity range is 20% to 98%. Additionally, the internal dimensions are W500mm × D600mm × H750mm. Please feel free to contact us if you have any inquiries. 【Device Performance】 ■ Temperature Range: -40°C to 100°C ■ Humidity Range: 20% to 98% ■ Internal Dimensions: W500mm × D600mm × H750mm *For more details, please refer to the PDF document or feel free to contact us.

• Thermostatic chamber

We would like to introduce our testing device, the "Combined Cycle Testing Equipment." It is capable of conducting standalone tests for salt spray, drying, and wetting, as well as cycle tests. By combining test conditions, it can replicate outdoor corrosion and accommodate various standard cycle test conditions. Additionally, the salt spray test is aimed at evaluating the corrosion resistance of coated steel plates, and it is also possible to conduct tests related to plating and coatings as specified by the standards for electric power meters. 【Device Performance (Partial)】 ■ Salt Spray: 35℃/50℃±1℃, Spray Amount 1.5±0.5ml/h/80cm2 ■ Drying ・ Temperature: 0–70℃±1℃ ・ Humidity: 25%rh±5%rh 【Applicable Standards】 ・ JIS Z 2371 Salt Spray Testing Method ・ JIS H 8502 Corrosion Resistance Testing Method for Plating ・ JIS K 5981 Synthetic Resin Powder Coating　　　Others *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our "Gear-type Aging Testing Machine." Among temperature tests, this testing device is particularly designed for aging tests of materials such as rubber, plastic, polyethylene, and vinyl, featuring a sample rotation function. By removing the sample rotation frame, it can also be used as a regular oven, allowing for a wide range of applications. Additionally, the temperature control circuit utilizes semiconductor bidirectional control elements, ensuring consistent temperature regulation across all set temperatures. 【Device Specifications】 ■ Temperature Range: 40℃ to 200℃ ■ Temperature Adjustment Range: ±0.75℃ across the entire temperature range ■ Heating Time: Approximately 50 minutes from room temperature to 200℃ ■ External Dimensions: W1190mm × D790mm × H1520mm ■ Internal Volume: 216L W600mm × D600mm × H600mm *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Digital Microscope VHX-6000." This device is a microscope that uses optical lenses, where light is directed onto the lens to focus and observe the image. With its multi-lighting feature, it allows for observations that make the most of the lighting effects. By tilting the lens, it enables highly reproducible observations from various angles. 【Device Specifications】 ■ Magnification: 20x to 2000x *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Multi-Angle Lens VHX-D510." This device irradiates the sample surface with an electron beam and projects the reflected electron beam as an image for observation. The sample chamber is maintained in a vacuum state, and the sample is captured using a super-depth lens (electron beam irradiation). It is possible to synthesize images from both optical lenses and super-depth lenses to obtain detailed images. 【Device Specifications】 ■ Magnification: 30x to 5000x *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Universal Material Testing Machine." It is capable of applying tensile and compressive loads of up to 300 kN to samples made of metal and other materials. By breaking or deforming the material itself or processed samples, we can measure their strength. This testing machine allows for the measurement of mechanical properties such as the breaking load and yield point of materials by conducting tests specified by JIS and ISO standards. 【Features】 ■ Measurement of mechanical properties such as breaking load and yield point ■ Capability for cyclic load testing that varies test values at regular intervals ■ Detailed control and data analysis possible via a computer connected to the testing machine 【Applicable Standards】 - ISO 6892-2009 - JIS Z 2241 *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing equipment, the "Impact Testing Device." Impact tests can be conducted on various items such as digital cameras, videos, mobile devices, LCDs, desktop computers, small home appliances, cosmetics, automotive parts like car stereos, and electronic components. The device can generate a wide range of arbitrary sine half-wave pulses with variable cushioning, allowing for impact testing. 【Features】 - A re-collision prevention mechanism to prevent double impacts on evaluation samples. - Air springs and hydraulic dampers to reduce impact on the surroundings. - Automatic repeat operation is possible by setting the number of cycles on the counter. 【Applicable Standards】 - JIS Z 0202 Packaging Goods - Drop Test Method - JIS E 3015 Railway Signal Safety Components - Impact Test Method - JIS C 60068-2-27 Environmental Testing Methods - Electrical and Electronic - Part 2-27: Impact Test Method (Test Code: Ea) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Hard Material Cutting Device." This device can be used for various purposes, such as cutting general steel materials and extracting test pieces from difficult-to-process materials. Thanks to its oscillation function, it minimizes "work hardening" due to thermal effects on the cutting surface, allowing for high-precision cutting surfaces. Additionally, the cutting method is not limited to straight cutting; it also employs a grinding wheel oscillation mechanism that maximizes cutting effectiveness, enabling cutting through oscillation. 【Device Specifications】 ■ Fixed sample dimensions: W390mm × D200mm × H380mm ■ Maximum cutting dimensions: φ380 *Varies depending on the material of the sample and the grinding wheel used. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Desktop Fluorescent X-ray Analyzer." It is capable of identifying and quantitatively analyzing elements contained in solid, powder, and liquid samples. Qualitative and quantitative analysis of elements in materials can be performed quickly and easily. This device can detect harmful substances such as Cd and Pb in plastics at the ppm level, in compliance with the EU's "WEEE Directive" aimed at promoting the recycling of electrical and electronic equipment, and the "RoHS Directive," which restricts the presence of certain hazardous substances. 【Features】 ■ Simultaneous analysis of multiple elements from S (atomic number 16) to U (atomic number 92) in samples ■ Quick and easy qualitative and quantitative analysis of elements in materials ■ Detection of harmful substances such as Cd and Pb in plastics at the ppm level in compliance with the "WEEE Directive" and "RoHS Directive" *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Thermographic Camera." It is a high-quality, high-resolution thermal imaging camera equipped with a touch panel LCD monitor and a 3.1-megapixel visible camera, allowing for high-precision diagnostics from both thermal and visible images. With excellent distance performance, it enables accurate temperature measurements even from a distance. 【Device Specifications】 ■ Pixel Count: 1024pix × 768pix ■ Measurement Temperature Range: -40℃ to 2000℃ *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "High-Speed Camera." It can achieve a shooting speed of 6400 frames per second at 1024pix×1024pix, 20000 frames per second at 640pix×480pix, and up to 900000 frames per second. Additionally, it has a very high shooting sensitivity, making it applicable in various fields such as fluid dynamics, combustion, and microscopic observation. 【Device Specifications】 ■Resolution: 1024pix×1024pix ■Maximum Shooting Speed ・2000fps (full frame) ・170000fps (partial frame) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce our testing device, the "Universal Material Testing Machine 2." It can apply tensile loads in accordance with JIS C 3801-1 8.1.1 "Tensile Load Test" and 8.2.1 "Tensile Fracture Load Test" to the test specimens, and testing is possible as long as the specimens can be mounted on the device. Please feel free to contact us if you have any requests. 【Device Specifications】 ■ Load Method: Vertical Hydraulic Load Type ■ Maximum Load Capacity: 500 kN ■ Effective Testing Space for Tensile: Maximum 800 mm ■ Load Speed: Maximum 50 mm/min *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Universal Material Testing Machine 3" owned by Kansai Electric Power Transmission and Distribution Company. It can apply tensile loads in accordance with JIS C 3801-1 8.1.1 "Tensile Load Test" and 8.2.1 "Tensile Rupture Load Test," as well as loads in accordance with 8.1.2 "Bending Load Test." Testing is possible with any specimen that can be mounted on the device. Please feel free to contact us if you have any requests. 【Device Specifications】 ■ Load Method: Vertical Hydraulic Load Type ■ Maximum Load Capacity: 1000 kN ■ Effective Testing Space - Tensile: Maximum 1800 mm, Compression: Maximum 1000 mm, Bending: Span 100–800 mm ■ Load Speed: Maximum 80 mm/min *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We would like to introduce the "Universal Material Testing Machine 3" owned by Kansai Electric Power Transmission and Distribution Company. It is capable of conducting tensile failure load tests while applying voltage in accordance with JIS C 3801-1 9 "Electrical Breakdown Load Test." The test specimens that can be used include high-voltage insulators for distribution and suspension insulators for transmission. 【Device Specifications】 ■ Load Method: Vertical Hydraulic Load Type ■ Maximum Load Capacity: 2000 kN ■ Effective Testing Space ・Tensile: Maximum 1100 mm, Compression: Maximum 1000 mm ■ Load Speed: Maximum 50 mm/min ■ Electrical Load Test: 100 kV *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices