天龍ＭＳＴ List of Products and Services

We would like to introduce a case where we applied PFAS-free coating to a water-stopping packing at our company. We received a request to change from a fluoropolymer coating on an EPDM water-stopping packing to a coating that does not contain fluorine due to PFAS issues. In response, we proposed a water-based lubricating paint newly developed by a paint manufacturer. This water-based coating can be cured at 120°C for 10 minutes at low temperatures, allowing treatment without affecting the substrate. [Case Overview] ■ Background of the Request - A desire to change to a coating that does not contain fluorine due to PFAS issues. ■ Proposed Solution - Proposed a water-based lubricating paint newly developed by the paint manufacturer. - Curing at 120°C for 10 minutes at low temperatures. - Treatment possible without affecting the substrate. *For more details, please download the PDF or feel free to contact us.

• paint

We would like to introduce a case where we applied a coating to a cutting blade at our company. When cutting film with a cutting blade heated to 360°C, we received a request to prevent the film (hot helmet) from sticking to the cutting blade. In response, we proposed a silicone resin combined with a boron-based paint. With a heat resistance of 800°C, it poses no issues for a cutting blade heated to around 360°C, and since it contains boron, we can also expect good release properties. [Case Overview] ■ Background of the Request - Prevention of film (hot helmet) sticking to the cutting blade ■ Proposed Solution - Proposed silicone resin combined with boron-based paint - Heat resistance of 800°C, so no issues at around 360°C - Contains boron, allowing for expected release properties *For more details, please download the PDF or feel free to contact us.

• paint

We would like to introduce a case of functional coating that we conducted. We were requested to perform insulation coating using the specified paint. A film thickness of over 100μm was required. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Coating with the specified paint ■ A film thickness of over 100μm was required *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

Our company, established in 1983, primarily specializes in the painting of functional coatings such as fluororesin paints and molybdenum disulfide paints. Additionally, we also perform phosphate coating treatment as a surface preparation for painting, and we accept requests for phosphate coating treatment only. We can accommodate various requests, not limited to functional paints, including paints and colors from specific manufacturers, types of resins, and desired performance characteristics (such as lubrication, heat resistance, insulation, release properties, chemical resistance, wear resistance, oil resistance, solvent resistance, etc.). We would like to be of service to your company, so please feel free to reach out if you have any concerns, prototype requests, or if you would like to check our technology. 【Services Offered】 ■ Painting ■ Phosphate Coating Treatment *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Our company began operations in 1983 and specializes in functional coatings such as fluororesin paints and molybdenum disulfide. We primarily apply coatings to drive components for motorcycles, automobiles, automotive air conditioners, medical devices, and more. We also coat chip saws with fluororesin paint. We offer paints specifically designed for sliding performance, available in various colors including black, white, red, blue, green, and purple. If you have a specific color request, we will do our best to accommodate it. We can consistently handle chip sizes ranging from φ80 to φ600. For larger sizes, please consult us. We can apply coatings with thicknesses ranging from 5μm to 30μm according to customer specifications. You can choose a thinner coating if the chip is already sharpened, or a slightly thicker coating if the chip is sharpened after painting. Of course, we can accommodate requests for even thicker coatings. 【Business Objectives】 ■ Coating solid lubricants on various materials ■ Phosphate coating treatment for steel ■ All businesses incidental to the above *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We would like to introduce our "Value-Added Coating for Industrial Products." We address various concerns of our customers, such as rust prevention and anti-seizing in areas where oil cannot be applied, noise reduction within non-disassemblable units, and energy-saving effects. We respond with specialized surface treatment technologies such as phosphate coating, fluororesin coating, and molybdenum disulfide coating. 【Features】 ■ Rust prevention and anti-seizing in areas where oil cannot be applied ■ Noise reduction within non-disassemblable units ■ Energy-saving effects *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company responds to various concerns of our customers, such as rust prevention and anti-seizing in areas where oil cannot be applied, as well as noise reduction in non-disassemblable units, through specialized surface treatment technologies like fluoropolymer coating, phosphate coating, and molybdenum disulfide coating. Regarding the "fluoropolymer coating" we offer, there are specifications tailored to the environment in which each type is used. If a coating that is unsuitable for the environment is applied, it can harm the coating film, leading to peeling. When the coating film peels, the performance of the paint cannot be realized. Therefore, when you request fluoropolymer coating from us, we ask about the purpose and the usage environment. Based on that information, we will propose the appropriate paint and then proceed with the coating. We are ready to assist regardless of the industry. Please feel free to consult us. 【Selection of Paint】 ■ For use at room temperature, epoxy-based fluoropolymer paint ■ For use at high temperatures (below 200°C), polyamide-based fluoropolymer *For those seeking lubrication or release properties, we can also propose and apply coatings that do not use PFAS. *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company provides value-added coatings to prevent rust. We solve this through a combination of phosphate coating treatment and rust-proof oil, as well as fluororesin coatings. Please feel free to contact us when you need our services. 【Examples of items】 ■ Tools ■ Screws ■ Bolts ■ Nuts ■ Washers, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company provides value-added coatings to prevent adhesion. We solve this through a combination of phosphate coating treatment and lubricating oil, as well as molybdenum disulfide coating. Please feel free to contact us when you need our services. 【Examples of applications】 ■ Engine parts ■ Screws ■ Bolts ■ Nuts ■ Washers, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company provides value-added coatings to prevent abnormal noises. We use a slippery coating to prevent abnormal noises during operation. Fluororesin coatings and molybdenum disulfide coatings are suitable. Please feel free to contact us when you need our services. 【Examples of applications】 ■ Automotive interior parts ■ Spring pins ■ Copier parts, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine

Our company offers value-added coatings that provide lubricity even in extreme environments. We can achieve lubricity under special conditions with fluororesin coatings and molybdenum disulfide coatings. Please feel free to contact us when you need our services. 【Examples of Applications】 ■ Air conditioning parts ■ Copier parts ■ Camera parts *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine

Our company offers value-added coatings that help minimize maintenance efforts. We maintain quality while reducing the hassle of post-use maintenance. The fluororesin coating makes it easy to remove paint and adhesives from jigs, as well as oil stains during cleaning. Please feel free to contact us when you need our services. 【Examples of Applications】 ■ Jigs ■ Bicycle chains ■ Frying pans, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company provides value-added coating services for extremely small parts. We have experience in coating micro shafts with a diameter of 1mm. Fluororesin coating and molybdenum disulfide coating are available. Please feel free to contact us when you need our services. [Examples of applications] ■ Electronic device components *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

Our company offers value-added coatings for identification by color. By painting circular saws with colored fluororesin, they can be identified by their specific applications. If you want to identify products of the same type by color, we can paint them in your specified color. Please feel free to contact us when making your request. 【Examples】 ■ Springs ■ Chip saws *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine

We would like to introduce the "phosphate coating treatment" that we handle. When requesting phosphate treatment, it is necessary to decide whether it will be manganese-based, zinc or zinc-calcium-based, or iron-based. Unlike coatings or plating films, phosphate coatings are compounds generated through chemical reactions, so they do not peel off. [Factors for deciding specifications (partial)] <Manganese Phosphate (thick film)> ■ Want the color to be black and have better rust resistance than black dyeing ■ Used in combination with oil or grease for wear resistance under high loads ■ Used in combination with lubricating coating for wear resistance under high loads *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine