Fujikura List of Products and Services

• Sensors

The "AT7 series" is a semiconductor pressure sensor that supports the output of high-resolution digital signals in a super compact 4×4mm package. The miniaturization of the package and the inward-folded leads achieve space-saving, reducing the mounting area by more than 72% compared to our conventional products. It can output a digital signal with an accuracy of ±1.5% FS over a temperature range of 0 to +85°C, making it suitable for a wide range of applications including electrical equipment, medical devices, and industrial machinery. 【Features】 ■ Achieves high pressure accuracy over a wide temperature range despite its small size ■ Contributes to miniaturization of products and multi-point measurement ■ Offers a lineup that accommodates pressure ranges from +25 to +1000 kPa and -100 to -25 kPa ■ Custom specifications can also be accommodated *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Sensors

【Features】 ■ High adhesion to glass ■ High transparency due to the use of fine wire antenna circuits ■ Ability to route conductive circuit antennas in any shape on a thin PET film ■ Achieves low-resistance conductive circuits ■ Enables a wide range of design possibilities ■ Excellent adhesion to curved surfaces due to high conformability ■ No discoloration from sunlight 【Applications】 ■ Window-mounted diversity antennas 　⇒ FM-VICS, ATV, DTV (One-segment, Full-segment), GPS ■ Antennas for RF-ID tags *For more details, please refer to the PDF document or feel free to contact us.

• antenna

【Features】 - By using a thin film material, it is possible to reduce the stiffness of the seat surface. - The shape of the sensors can be freely designed to match the shape of the seat. - It efficiently distinguishes between people (adults and children) and luggage. - It is possible to impart flame retardancy through printing with special ink. 【Applications】 - It is used as a sensor to determine the presence or absence of passengers in the front passenger seat or rear seats in systems aimed at encouraging seat belt use for occupants.

• Sensors

A cold plate is a liquid-cooled cooling device that is suitable for cooling high-heat components such as CPUs and GPUs. It can be provided as a unit that combines the heat source cooling section with piping, branching sections, and couplers. 【Features】 ■ Excellent cooling performance ■ High reliability ■ Custom design according to the shape and layout of the heat source ■ Unitization including couplers and piping

• Other electronic parts

The AD3 series consists of silicon piezo-resistive pressure sensors and signal processing ICs. The weak signals from the pressure sensor chip are amplified and temperature compensated by the signal processing IC, converting them into an analog output proportional to the pressure. The AP3 series is designed to output low noise without using A/D and D/A converters. The type of pressure that can be measured is gauge pressure. 【Features】 ■ Differential pressure sensor (2 ports) ■ Amplified and temperature compensated analog output ■ Non-digital correction ■ Overall accuracy ±1.5 %FS ■ Compatible with supply voltages of 3.3 and 5.0 Vdc ■ Temperature compensation range 0 to 60℃ ■ Custom specifications available *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

【Features】 ■ Waterproof performance ranges from drip-proof to submersible. ■ When used with a PC keyboard, it can maintain normal operation even if accidents such as spilling drinking water occur. ■ When used with portable devices, it can prevent issues caused by water exposure during outdoor use. 【Applications】 ■ Switches that require waterproofing, such as keyboards for laptops. *For more details, please refer to the PDF document or feel free to contact us.

• switch

【Features】 ■ Supports high switch stroke. ■ High key durability. ■ High mounting position accuracy (maximum ±0.2mm). 【Applications】 Flexible printed circuit board for switches with a click feel. *For more details, please refer to the PDF document or feel free to contact us.

• switch

【Features】 - Compact, lightweight, and slim design is possible. - Environmentally friendly (lead-free, VOC-free). - Achieves high adhesion strength (greater than solder mounting strength). - Excellent environmental resistance due to special resin coating reinforcement. - Superior environmental resistance through connections with soft conductive adhesives. 【Applications】 - Keyboards, electronic piano keys, input switches for mobile phones, touchpads, automotive antennas, etc. (Membrane switches requiring C/R chip components, mating connectors, LEDs, and packaged IC mounting structures) *For more details, please refer to the PDF document or feel free to contact us.

• switch

Ultra-fine Circuit This is a flexible printed circuit board formed using gravure offset printing technology. 【Features】 ■ Lower resistance compared to ITO film. ■ Superior bendability compared to ITO film. ■ Can be used as a transparent electrode due to mesh formation. ■ Enables high-density wiring. ■ Frame circuits and transparent electrodes (mesh electrodes) can be formed in the same process. 【Applications】 Electrodes for illuminated electrostatic touch keys. *For more details, please refer to the PDF document or feel free to contact us.

• switch

This is a functional component that is formed by processing a membrane, which is a flexible printed circuit board created using screen printing technology to form circuits on a film. Generally, products that align membranes to form numerous switch circuits are often referred to as membrane switches; however, our company also refers to those that have additional functionalities as membrane switches. 【Features】 ■ Flexibility Circuit formation is possible on various films, allowing for bending and flexing. ■ Cost-effective Low-cost circuit formation through printing on PET film. ■ Compatible with various structures Adaptable to various switches and sensors through combinations of films, component mounting, and special inks. *For more details, please refer to the PDF document or feel free to contact us.

• switch

【Features】 ■ Can be wired in height spaces of 1.4mm (AWG42×4 cores) and 1.2mm (AWG42×3 cores). ■ Supports slide strokes of 50mm or more. ■ Passed 200,000 slide open/close tests. ■ Resistant to noise and suitable for high-speed transmission. ■ Consistent production from cable to assembly can be achieved in one factory. 【Applications】 ■ Slide-type mobile devices * For more details, please refer to the PDF document or feel free to contact us.

• cable

The conversion adapter is used to connect connectors of different shapes. It has two or more joints, and its characteristics are based on the coupling connector. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The PSH2 series is an ultra-compact coaxial connector developed for wireless LAN and notebook PCs. The connection to the cable uses a crimping method for both the outer conductor and the center conductor, achieving low cost. 【Features】 - The board area is approximately 55% smaller compared to the PSH series. - It is small and lightweight, with a mating height from the board of 1.5mm (MAX 1.6mm). - The compatible cable has an outer diameter of φ 0.81mm. - It can support frequencies up to 6GHz. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The PSH series is a small coaxial connector developed for wireless LAN and notebook PCs. The connection to the cable uses crimping for both the outer conductor and the center conductor, achieving low cost. 【Features】 ■ The operating frequency can support up to 6GHz. ■ Compatible cables have outer diameters of φ 0.81mm, φ 1.13mm, φ 1.32mm, and φ 1.37mm. ■ It is compact and lightweight, with a mating height from the board of 2mm (MAX. 2.2mm) or 2.5mm (MAX. 2.6mm). ■ It complies with RoHS directives. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The 27CP series is a 75Ω connector for the 27DP series (50Ω type). It is a compact 75Ω connector widely used in interfaces within equipment. Its push-on design also provides excellent ease of attachment and detachment. It is not compatible with the 27DP series. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The BNC75 type connector for broadcasting equipment is a high-performance 75Ω BNC connector that has thoroughly improved its internal structure based on conventional products, achieving compatibility with the 12G-SDI standard by minimizing impedance mismatching to the utmost limit. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The BNC75 series is a 75Ω connector of the bayonet lock type BNC series. It is compatible with the BNC series. Its applications include measuring instruments, broadcasting equipment, and CATV, among others. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The PML series is a connector equipped with a mechanism (floating mechanism) that allows for misalignment of the mating axis. The opening is DDK original and is equivalent in size to SMA type. It absorbs the misalignment of the mating axis that occurs during multi-connection mounting. *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

This is a small push-on lock coaxial connector compliant with the SMP type of MIL-STD-348A standard. It has minimal play during mating, which is characteristic of push-on types, and provides stable performance up to high frequencies. Applications include radio base station equipment, measuring instruments, microwave communication devices, etc. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

This is a connector compatible with PHS, semi-rigid cables for mobile phone base stations, semi-flexible cables, etc. Its applications include PHS and mobile phone base stations, ETC, measuring instruments, microwave communication equipment, antennas, and more. 【Features】 - The PDM series changes the coupling method of the SMA connector to a push-on type, allowing for easy one-touch attachment and detachment. - There is no need for torque management during coupling of the SMA connector, enabling placement in small spaces. - The outer diameter of the plug connector is φ9mm, and it features a closed-entry structure that protects the outer conductor, making it resistant to twisting. - Semi-rigid and semi-flexible cables are compatible with UT-85 and UT-141A specifications. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

This is a coaxial connector designed to comply with IEC-Pub169-19, featuring an ultra-compact low-profile and push-on mechanism, created to accommodate the miniaturization and high density of communication equipment. The height from the printed circuit board when mated is less than 6mm (combination of SP and LR) and less than 11mm (combination of LP and SR). *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The 27DS series complies with the SMC type (Sub Miniature Type C) specified in MIL-PRF-39012. It is a 50Ω connector for ultra-thin cables that can accommodate the miniaturization and high density of communication equipment. The recommended tightening torque for coupling is 24.5 to 35.3 N·cm. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The 27DP series is a 50Ω connector for ultra-thin cables that can accommodate the miniaturization and high density of communication equipment compliant with the SMB (Sub Miniature Type B) specified in MIL-PRF-39012. The coupling method is push-on, and cable attachment can be done using crimping or soldering. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The DM series is a compact, lightweight, and robust 50Ω connector with excellent high-frequency characteristics, conforming to the SMA shape (Sub Miniature Type A) as specified in MIL-PRF-39012. The coupling method is a screw coupling type, allowing for secure connections. There are three cable attachment methods: crimping, soldering, and clamping. *For more details, please refer to the PDF documentation or feel free to contact us.*

• Automotive Connectors

The TNC series is a connector that uses a screw coupling method for connection, as opposed to the BNC series. Due to the screw coupling method, the connection is mechanically strong, resistant to external vibrations, and has minimal high-frequency leakage. The electrical and mechanical performance is in line with the BNC series. The recommended tightening torque for the coupling is 45 to 68.6 N·cm. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

This is an insulated receptacle type designed for mounting on printed circuit boards that fits with the BNC series (plug). The external conductor of the connector is reliably insulated from the panel. The ground terminal is connected to the external conductor and is integrated with the center conductor in a mold, making it easy to handle. As a VA product, the contact uses a sound-type shape (press contact). There are two types of mounting for printed circuit boards: vertical and horizontal. When mounted horizontally on the printed circuit board, the height from the printed circuit board is low at 14.0 mm. It can be used in a wide range of applications such as computers, communication equipment, and medical devices. *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

This is an insulated panel-mounted receptacle that fits with the BNC series (plug). The external conductor of the connector is reliably insulated from the panel. The ground terminal is connected to the external conductor and is integrated with the center conductor in a molded design, making it easy to handle. The round pin contact type (31-10-CF, 31-10-CAu-CF) has obtained UL certification (UL File No. E72124). *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The BNC series is a 50Ω coaxial connector with a bayonet lock mechanism. It is widely used for interfaces of equipment that require frequent connection and disconnection. If you are using a 75Ω cable, please use it at a frequency of 200MHz or below. For frequencies exceeding 200MHz, please use the BNC75 series. The BNC series and BNC75 series are compatible with each other. *For more details, please refer to the PDF documentation or feel free to contact us.*

• Automotive Connectors

The N series is a 50Ω coaxial connector of the N-type. We offer a wide variety of types to accommodate various cables. The recommended tightening torque for coupling is 68.6 to 117.6 N·cm. Note: The NC series (75Ω) is not compatible. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The HG series is a connector born from the concept of "maximizing the performance of connectors." We have refined the structure to minimize impedance mismatches within the connector, and achieved ultra-precision machining with high-level manufacturing technology, providing connectors with excellent high-frequency characteristics. 【Features】 ■ High-level high-frequency characteristics, suitable for all communication devices. ■ Minimal signal degradation at the connector, making it ideal for product evaluation. ■ A wide variety of options and surface treatments available. 【Applications】 Radio base station equipment, communication devices, measurement instruments, anechoic chambers, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

This is an AISG standard connector for 3G antennas. It adopts a crimping connection method, which improves the efficiency of wiring work. The structure takes taping into consideration, making taping during installation easy and providing a more reliable waterproof effect. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The CMV1 series is a compact, round waterproof plug connector that features a push-on, turn-off mechanism for easy engagement. The design has been modified from the conventional model (CM10) to enhance vibration resistance. The CMV1S series is compatible with the CMV1 connector and adopts a screw coupling method to further improve vibration resistance. *It is compatible with Mitsubishi Electric's Servo J4 series. 【Features】 ■ Improved vibration resistance ■ Robust structure with metal shell ■ CMV1: One-touch lock coupling, CMV1S: Screw coupling ■ The 10-core type has a structure where the ground contact makes contact before the other contacts ■ Low-profile mounting using angled plugs ■ Can be used with conduits manufactured by Sankeisakusho *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

1. The CM10 series is a compact, round waterproof connector that features a push-on and turn-off mechanism for easy fitting with one touch. 2. There are black trivalent chromate shells (Type D) and nickel-plated shells (Type D6). 3. By adopting a metal shell for a robust structure and changing the back shell and clamp nut to lightweight metal and resin, we have achieved a reduction in weight compared to conventional products. 4. It is compact and waterproof, expanding its applications to various electrical and electronic devices. 5. Earth contact attachment (10 cores) 6. Low-profile implementation using angled plugs 7. Type D6 is 30% lighter compared to Type D. 【Features】 ■ Robust structure due to the adoption of a metal shell ■ One-touch and secure locking achieved through the push-on/turn-off mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The CM09 series is a compact, round waterproof connector that uses a push-on, turn-off mechanism for easy one-touch mating. The plug connector locks securely with just a push, and when disconnecting, the lock is released by rotating the coupling ring. Therefore, there is no concern about the connection coming apart even when unexpected external forces, such as pulling on the cable, are applied. Additionally, the use of a metal shell ensures a robust structure. Although developed for industrial equipment, its compact size and waterproof features expand its applications to various electrical and electronic devices. 【Features】 - Robust structure due to the use of a metal shell - One-touch and secure locking achieved through the push-on, turn-off mechanism - Waterproof rating: IP67 or higher (when mated) - Sequence mechanism: 1mm contact timing difference (2 power contacts) - Reliable grounding to the shell through the installation of a ground plate - High-reliability crimp connection method *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

The CM04T series is a product developed for connecting various sensor devices. Despite having 8 contacts, it is designed in a compact M12 size, allowing for a wide range of applications in various electronic and electrical devices. Additionally, it is waterproof, making it suitable for use in harsh environments. 【Applications】 Various electronic devices related to sensors, measuring instruments, medical devices, communication equipment, office automation equipment, factory automation equipment, and other electronic and electrical devices. 【Features】 ■ Waterproof: Complies with IP67 in mated condition ■ Flame retardant: Plastic uses UL94V-0 flame retardant material ■ Compact design with 8 contacts in M12 size ■ Supplied with harness for plugs, jacks, and plug receptacles *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The CM03/CM03A series is a waterproof connector compatible with the DeviceNet standard Mini-style. *DeviceNet: A globally standardized control network for factory automation. It enables interconnection between PLCs from different manufacturers and various field devices (displays, solenoid valves, I/O terminals, inverters, operation terminals, robots, NC, etc.). - High wiring flexibility - Dedicated cables are specified The CM03/CM03A series is waterproof (IP67) and can be used not only for DeviceNet applications but also for various electronic and electrical devices used in harsh environments. 【Features】 ■ Waterproof: Complies with IP67 in the mated condition ■ Sequence structure: Allows for timing differences in contact by varying the length of pin contacts. ■ Receptacles are available with cables or wires, as well as soldering types. ■ Miswiring prevention: "Red, Black, White, Blue" are indicated on the contact holder. The drain contact is unmarked. 【Compatible products: CM03-P5S(R1), CM03-J5P(R1)】 *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The CM21 integrated molded harness is a cable with connectors developed for industrial Ethernet. The CM21 connector complies with the IEC61076-2-101 M12 D-coding standard, ensuring safe use as an industrial Ethernet interface. The plug mating section is equipped with an O-ring, providing water and dust resistance when the connector is mated. We also offer modular plugs as connector combinations, allowing for various usage methods. As it is delivered as an integrated molded harness, it helps reduce wiring labor. 【Features】 ■ Mating Method (CM21 Connector) The mating section is designed with two positioning keys based on the IEC61076-2-101 M12 D-coding standard, preventing incorrect mating. The mating screw uses M12 (1mm pitch), allowing for smooth mating and disengagement. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The CM02B series 5-core connector integrated molded harness is a product compatible with DeviceNet Micro-style. The CM02B series 4-core connector integrated molded harness has been developed for connecting various sensor devices and complies with the NECA4202 (Japan Electric Control Equipment Industry Association) standard. 【Applications】 ■ Proximity sensors, photoelectric sensors, and various sensors ■ Measuring instruments, medical devices, communication equipment, information equipment, control equipment, and other electronic devices 【Features】 ■ Waterproof: IP67 or higher (in mated condition) ■ Flame retardant: Plastic materials use UL94V-0 flame-retardant materials ■ Lightweight and compact design with an outer diameter of 15mm, enabling equipment miniaturization. ■ Plugs/jacks are supplied as cable integrated molded harnesses ■ Receptacle and plug receptacle: soldering type *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The CM02 series is a waterproof connector compatible with the DeviceNet standard Micro-style. DeviceNet is a globally recognized open factory automation field network, primarily used for lower-level networks. It facilitates the interconnection between controllers and field devices (such as displays, solenoid valves, I/O terminals, inverters, operation terminals, robots, NC, etc.). Additionally, the CM02 series is also recommended for CC-Link applications. The CM02 series features waterproofing (IP67), expanding its applications beyond DeviceNet to various electronic and electrical devices used in harsh environments. 【Features】 ■ Crimp connection: A highly reliable connection method has been adopted (plug/jack). ■ The receptacle uses a soldering method. ■ Wiring error prevention: "Red, Black, White, Blue" is indicated on the contact holder. ■ A range of products is available, including plugs (sockets), jacks (pins), T-branch adapters (taps), termination resistors, receptacles (pins), and plug receptacles (sockets). *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The 89J connector is waterproofed on the mating side with a flat gasket and on the wiring side with a trapezoidal cross-section gasket, allowing it to be used underwater at depths of up to 1.8 meters. There are four shell sizes: 22, 28, 32, and 36, and three shapes: straight plug, box receptacle, and cable receptacle. *Compatible with the MS series. *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

The waterproof 89M connector is designed for use in outdoor and underwater environments, functioning without degradation in rain, snow, water, or mud. It is suitable for a wide range of applications, including outdoor communication equipment, broadcasting facilities, marine equipment, ships, and machine tools and plant equipment that are exposed to cutting oils or coolant. There are four shell sizes: 22, 28, 32, and 36, and three shapes: straight plug, box receptacle, and cable receptacle. The coupling side is waterproofed with an "O" ring, and the wiring side is sealed with a gasket, allowing it to withstand water pressure of 20 kgf/cm² (equivalent to a depth of 200 meters). The screws on the coupling part are special trapezoidal screws, which differ from MS connectors, so they are not compatible. *For more details, please refer to the PDF document or feel free to contact us.*

• Automotive Connectors

The WEB series is a vibration-resistant, waterproof type of connector developed for use in harsh environments where equipment is exposed to water droplets, cutting oil, and dust. The connector features a fitting lock mechanism that allows you to insert it and rotate it 90 degrees, confirming the lock completion and release with an audible "click." 【Features】 ■ Compact and high-density: It has a compact design with a high-density contact arrangement. ■ Same insert arrangement as the JM series. ■ Secure coupling with five keys: The shell has five positioning keys, ensuring a secure connection. ■ Easy and quick wiring: The solder cups of the contacts integrated into the insert are aligned in a consistent direction, making wiring easy. ■ Compliance with various standards: The insulator is made from materials that comply with UL standards. ■ Waterproof: IP67 or higher in the mated condition. ■ RoHS2 compliant. *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors

The JM series round connectors comply with JIS C 5432. The number of contacts available includes 3, 4, 5, 7, 10, 16, 19, 24, 28, and 32. There are plastic and metal hoods available. In addition to soldering types, we also offer labor-saving products in the "P.C.B" dip type, making them suitable for a wide range of electronic devices. 【Features】 - Compact, high-density design with lightweight and high-density contact arrangement. - The reliable coupling shell has five positioning keys for secure connection. - Easy and quick wiring: The solder cups of the contacts integrated into the insert are aligned in a consistent direction, facilitating easy wiring. - Compliance with various standards: The insulation material used complies with UL standards. - Labor-saving products: The box receptacle also includes solder dip terminal products, enabling labor-saving wiring. *For more details, please refer to the PDF materials or feel free to contact us.

• Automotive Connectors

The DCA series complies with MIL-DTL-5015 and is a connector that uses synthetic rubber in the insert to accommodate various environments where industrial equipment is installed. Additionally, the F type and R type feature a drip-proof structure that shuts out the intrusion of water droplets, cutting oil, dust, etc., enhancing the reliability of the equipment. It is a reverse bayonet lock connector suitable for environments with servo motors, machine tools, FA-related devices, and high dust levels. 【Features】 ■ The mating method is a reverse bayonet type, making attachment and detachment easy. ■ Complete mating can be confirmed by sound and marking. ■ The contacts are of the solder type. ■ Resistant to vibration and shock. ■ Operating temperature range: -55℃ to +125℃. ■ Compliant with VG95234 (mating method) and MIL-DTL-5015 (insert arrangement). *For more details, please refer to the PDF document or feel free to contact us.

• Automotive Connectors