グローバルコード List of Products and Services

"alliveⓇPEEKcoat" is a high-performance coating made by dispersing a special super engineering plastic resin called PEEK in water/solvent. After being sprayed, it forms a film by firing at approximately 380-400°C (substrate temperature). This resin, which possesses excellent mechanical properties such as heat resistance, chemical resistance, wear resistance, and low friction, can be applied to metals and other materials, making it widely used in industries ranging from machinery to food, medical, and aerospace. [Main Applications] ■ Manufacturing Industry ■ Aerospace Field ■ Automotive Industry ■ Medical Field ■ Electronics and Electrical Field ■ Food Processing Industry *For more details, please download the catalog or feel free to contact us.

• paint

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, suitable for bearings in precision equipment that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: By using in sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydroelectric power equipment bearings: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• Coating Agent

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: 0.035 or lower 【Industries Served】 ■ Industrial Machinery Sector Bearing parts of precision machinery: By providing low friction, it is suitable for bearings in precision equipment that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment requiring high-speed rotation, such as machine tool spindles and high-speed motors. ■ Automotive Industry Internal engine parts: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission parts: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■ Aerospace Industry Mechanical parts of aircraft: By using it in sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■ Energy Industry Bearings of wind turbines: Used in components like main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Bearings of hydroelectric power generation equipment: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• Coating Agent

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: 0.035 or lower 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Low friction contributes to the performance of precision equipment bearings that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts within the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: Used in sliding parts of movable sections and control systems of the airframe, contributing to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: Applied to bearing parts used in underwater environments, contributing to improved power generation efficiency.

• Coating Agent

Our company offers PEEK coating as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, it is suitable for bearings in precision equipment that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment requiring high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying it to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Mechanical parts of aircraft: By using it on sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■Energy Industry Bearings of wind turbines: Used in components like main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Bearings in hydroelectric power generation equipment: By applying it to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• Coating Agent

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coatings (AP105+AT135). *Friction coefficient: 0.035 or lower 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, suitable for bearings in precision instruments that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical components: Used in sliding parts of movable sections and control systems of the airframe, contributing to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: Applied to bearing parts used in underwater environments, contributing to improved power generation efficiency.

• Coating Agent

A complaint about the fluorine coating peeling off occurred in the inner pot of a domestic rice cooker manufacturer. Since switching to PEEK coating about 20 years ago, there have been no complaints regarding peeling paint or similar issues; it is a coating that has excellent adhesion to metals.

• Coating Agent

"allive® PEEKcoat" is a high-performance coating that disperses a special super engineering plastic resin called PEEK in water and solvents. Organic fluorine compounds known as "PFAS" are essential in everyday products, industrial goods, and their manufacturing processes, but they do not decompose naturally and are raising concerns about their impact on living organisms and the environment. The EU (European Union) and the US (EPA - Environmental Protection Agency) are strengthening regulations, making the discovery of alternative materials urgent. Therefore, we propose PEEK coatings that excel in heat resistance, chemical resistance, mechanical properties, flame retardancy, and non-stick properties. 【Exhibition at FOOMA JAPAN 2025】 Date: June 10 (Tuesday) to June 13 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Hall 7, D-07 *For more details, please download the catalog or feel free to contact us.

• Coating Agent
• paint

We would like to introduce a case where our 'PEEK coating' was tested and adopted for bolts in marine plants. In the bolts of marine plant equipment, there were issues with corrosion and rusting of parts. Our PEEK coating was evaluated as capable of meeting performance requirements. 【Case Overview】 ■Issues - Corrosion and rusting of parts ■Results - After 2000 hours of salt spray testing, the results were satisfactory. *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK coating' was adopted for kitchen sink units. There were no paints available that allowed for painting on stainless steel for sink bowls and range hoods. With its adoption, the paintability on stainless steel has improved. 【Case Overview】 ■Challenges - Diversification of color design - No paint available that allows for painting on stainless steel ■Results - Coloring on stainless steel has become possible - Paintability on stainless steel has improved *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK coating' was adopted for shoe sole molds. In the case of sole molds, there was a challenge to reduce the use of release agents due to environmental issues. With the adoption, the release properties improved, and it has become a long-standing achievement for major shoe manufacturers. 【Case Overview】 ■Challenge - Reduction of release agent usage due to environmental issues ■Results - Improved release properties - Established a long-standing track record for major shoe manufacturers *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK coating' was adopted for bread loaf molds. In bread loaf molds, the durability of the mold coating (silicone, fluorine) was short, requiring frequent recoating, and there were also issues with the release properties from the bread. With the adoption of the coating, there was no peeling, and both the release properties and coating durability improved, leading to an increase in bread yield. [Case Overview] ■Challenges - The durability of the mold coating was short, requiring frequent recoating. ■Results - No coating peeling, and the coating durability improved (release properties were also not an issue). - Increased bread yield. *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK coating' was adopted in the food manufacturing line. In the food manufacturing line, there were issues with sticking of frozen udon, potato salad, etc., as well as the peeling of fluorine coating on manufacturing containers and molds. With the adoption of the PEEK coating, the non-stick effect significantly reduced equipment cleaning time and improved adhesion to stainless steel. [Case Overview] ■Challenges - Reduction of sticking for frozen udon, potato salad, etc. - Peeling of fluorine coating on manufacturing containers and molds ■Results - Significant reduction in equipment cleaning time - Substantial improvement in durability *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK coating' has been adopted in cooking appliances. There were issues with the peeling of the fluorine coating in the inner pots of rice cookers and the challenges of fluorine alternatives due to PFAS regulations. With this adoption, we were able to obtain FDA approval in the U.S. and compliance with the Food Sanitation Act in Japan, leading to a long-standing track record for the inner pots of rice cookers. 【Case Overview】 ■Challenges - Peeling of the fluorine coating in rice cooker inner pots - Fluorine alternatives due to PFAS regulations ■Results - Long-standing track record for rice cooker inner pots *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case where our 'PEEK Coating' has been adopted for automotive-related seat molds and painting jigs. The company faced the challenge of eliminating the use of release agents due to environmental issues in epoxy resin and foamed urethane filling molds. With the adoption of our coating, the release properties improved, leading to a reduction in the use of release agents, which in turn reduced the burden on the environment and human health, as well as improved work efficiency. 【Case Overview】 ■ Challenge - Elimination of release agents due to environmental issues ■ Results - Improved release properties and reduced use of release agents - Reduced burden on the environment and human health, and improved work efficiency *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce a case study on the implementation of our 'PEEK coating' for automotive motor molds. In automotive motor molds, there was a demand for the elimination of release agents due to environmental issues and resistance to alkaline release agents in applications such as sheet molds and painting jigs. The introduction of this coating has simultaneously achieved a reduction in environmental impact and an improvement in work efficiency. Additionally, this coating has also been implemented in bread molds, frozen food production lines, and cooking appliances. For more detailed information, please refer to the related links. 【Case Overview】 ■Challenges - Elimination of release agents due to environmental issues - Resistance to alkaline release agents ■Results - Achieved reduction in environmental impact and improvement in work efficiency *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce the types and characteristics of the 'PEEK Coating' that we handle. Our coating products are designed to exhibit suitable performance according to their applications. AP105 can be used alone as a base coating. For applications requiring higher performance, using AT135 (fluorine-free) or AT105 (fluorine content below 20%) as a topcoat can achieve even higher performance. 【AP105 Specifications (Partial)】 ■Type: Base ■Particle Size (um): 20 ■Specific Gravity: 1.3 ■Color: Black ■Hardness (Pencil Hardness): 9H *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce the advantages of our "PEEK Coating." When compared to other coating materials, it is clear that our coating surpasses others in wear resistance, chemical resistance, heat resistance, and insulation properties. In terms of non-stick properties, it also demonstrates high performance, second only to fluorine coatings, and there are many cases where our coating, which excels in wear resistance in various environments, lasts a long time. 【PEEK AP105 Specifications】 ■ Continuous use temperature: 260℃ ■ Hardness: 9H ■ Presence of pinholes: None *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to introduce our "PEEK Coating." It excels in wear resistance, chemical resistance, heat resistance, insulation, and non-stick properties. By applying and firing it onto molds, it can significantly extend the lifespan of molds and eliminate the hassle of re-coating, thereby improving production efficiency and reducing costs, along with various other benefits. Additionally, in anticipation of the PFAS regulations expected to take effect by 2028, considering a transition to this coating now can help avoid future risks and establish a sustainable production system. 【Features】 ■ Excellent wear resistance, chemical resistance, heat resistance, insulation, and non-stick properties ■ Significant extension of mold lifespan ■ Achieves improved production efficiency and cost reduction *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is an innovative surface treatment technology that utilizes the high-performance resin PEEK. With a long history, this technology has been significantly improved through advanced research and development, overcoming the traditional challenges of application difficulty and achieving high-quality finishes with a simple application and firing process. The "allive(R) PEEK coating," which we handle as the exclusive distributor, is currently being widely introduced and trialed across various industries, including food, automotive, and electronic components. 【Products Offered】 ■ 100% PEEK (Fluorine-free): Extremely high wear resistance and chemical resistance ■ Less than 20% Fluorine: Extremely high non-stick properties *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that allows for coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, which enhances the performance of the PEEK resin. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Lineup】 ■ 100% PEEK (Fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% Fluorine-containing (Low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties, and by applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, organic solvents, etc. as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

The "PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be added. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, organic solvents, etc. as a chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

The "PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

The "PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, organic solvents, etc., as a chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing for the addition of PEEK resin's properties. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Lineup】 ■ 100% PEEK (Fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% Fluorine-containing (Low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• Coating Agent

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing for the addition of PEEK resin's properties. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Lineup】 ■ 100% PEEK (Fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% Fluorine-containing (Low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• Coating Agent

Global Code Co., Ltd. is a trading company that conducts business on a global scale. Founded in 2015, initially focusing on business between Japan and South Korea, our company has expanded its target to encompass the entire planet. Our mission is to connect countries and people on a global scale through the treasure of products, leading our customers' businesses to success. 【Business Activities】 ■ Export Business ■ Import Business ■ OEM Business ■ Cross-Border E-Commerce *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts