メトラー・トレド List of Products and Services

Metler Toledo's XPR Automatic Dispensing Balance: - Efficient and safe automatic weighing - Accurate and efficient. Minimum display 2µg - When combined with a liquid dispensing module, it can prepare concentrations with high precision up to 0.1mg/g. - When connected to LabX software, SOP procedures are displayed directly on the balance's screen.

In the pharmaceutical industry, accurate measurement of active ingredients is essential in dispensing operations. Particularly when dealing with expensive pharmaceuticals or rare substances, measurement errors can lead not only to increased costs but also to impacts on product quality. Manual weighing is prone to human errors and environmental factors, which can result in low reproducibility of results. The XPR automatic dispensing balance from METTLER TOLEDO addresses these challenges. 【Usage Scenarios】 - Dispensing pharmaceuticals - Preparing reagents - Weighing trace components 【Benefits of Implementation】 - Reduced weighing time - Improved quality through high-precision measurements - Minimization of waste of valuable substances - Achievement of highly reproducible results

In the food industry, the precise measurement of raw materials during the formulation process significantly affects product quality. Particularly in the formulation of trace components such as additives and flavorings, measurement errors can greatly impact taste and flavor. The XPR automatic dispensing balance achieves a level of accuracy that is impossible to achieve manually, contributing to the improvement of food formulation quality. 【Usage Scenarios】 - Formulation of raw materials in food manufacturing - Recipe development in research and development - Component analysis in quality control 【Benefits of Implementation】 - Stabilization of product quality through improved formulation accuracy - Reduction of waste of expensive raw materials - Shortening of work time and increased efficiency

In the field of chemical reactions, the precise measurement of reactants significantly affects the efficiency and reproducibility of the reaction. Especially when using trace components or expensive reagents, measurement errors not only undermine the reliability of experimental results but also lead to increased costs. The XPR automatic dispensing balance achieves a level of accuracy that is difficult to attain with manual operations, balancing the efficiency of the reaction process with high-quality results. 【Usage Scenarios】 - Preparation of reagents in chemical reactions - Addition of trace components - Measurement of expensive substances 【Benefits of Implementation】 - Reduction in measurement time - Improvement in reproducibility - Reduction of reagent waste

In the cosmetics industry, precise measurement of ingredients is crucial for product quality. Especially for the formulation of trace components and to eliminate waste of expensive raw materials, accurate measuring capability is essential. Inaccurate measurements can lead to deterioration of product quality and increased costs. The Mettler Toledo XPR automatic dispensing balance enables a level of precision in measurement that is impossible with manual operation, supporting quality control in cosmetics manufacturing. 【Application Scenarios】 - Formulation of cosmetic ingredients - Quality inspection - Research and development 【Benefits of Implementation】 - Improved quality through accurate measurement - Reduction of waste of expensive raw materials - Achievement of highly reproducible results

In the field of environmental analysis, accurate measurement of trace contaminants and components is required. Particularly in the detection of harmful substances in the environment and the analysis of trace components, high-precision measurement is essential. Inaccurate measurements can undermine the reliability of analysis results and lead to incorrect judgments. The Mettler Toledo XPR automatic dispensing balance enables a level of accuracy in measurement that is impossible with manual operation, streamlining the measurement process in environmental analysis. 【Application Scenarios】 - Measurement of trace components in water quality analysis - Analysis of soil contaminants - Measurement of particulate samples in the atmosphere 【Benefits of Implementation】 - Improved reliability of analysis results through high-precision measurement - Efficient use of trace samples without waste - Reduction in measurement time and enhanced reproducibility

In the field of university research, accurate measurement is a crucial factor that influences research outcomes. Particularly when handling trace samples, manual measurement can be time-consuming and labor-intensive, and it is also prone to errors due to human mistakes. The XPR automatic dispensing balance addresses these challenges, contributing to increased efficiency and accuracy in research. 【Application Scenarios】 - Experiments using trace samples - Weighing expensive reagents - Pursuit of highly reproducible experimental results 【Effects of Implementation】 - Reduction in measurement time - Decrease in sample loss - Improvement in the reliability of experimental data

In the hospital's testing department, accurate measurement of reagents and samples is essential to obtain precise test results. Particularly in the measurement of trace components and the use of expensive reagents, measurement errors can compromise the reliability of test results. The XPR automatic dispensing balance enables a level of accuracy in measurement that is impossible with manual operation, contributing to improved testing precision. 【Usage Scenarios】 - Preparation of trace components - Measurement of expensive reagents - Preparation of testing reagents 【Effects of Implementation】 - Reduction of measurement time - Highly reproducible results - Reduction of reagent waste

In the semiconductor industry, the precise measurement of trace materials significantly affects product quality. Particularly in situations where high-precision material formulations are required, measurement errors can directly impact product performance. The XPR automatic dispensing balance enables a level of accuracy in measurement that is impossible with manual operations, contributing to quality improvement in semiconductor manufacturing. 【Application Scenarios】 - Precise measurement of semiconductor materials - Formulation of trace additives - Sample preparation in quality control 【Effects of Implementation】 - Improved measurement accuracy - Reduction of material waste - Shortened work time - Achievement of highly reproducible results

In the field of materials development, accurate weighing is essential for evaluating the composition and properties of new materials. In particular, high-precision weighing techniques are required to eliminate waste of expensive materials and to mix trace components. Manual weighing not only takes time and effort but also has the potential for errors due to human mistakes. The XPR automatic dispensing balance achieves precise automatic weighing at a level that is impossible manually, with a minimum display of 2µg. This streamlines the weighing process in materials development and enables the attainment of highly reproducible results. 【Application Scenarios】 - Research and development of new materials - Mixing of trace components - Weighing of expensive materials - Quality control 【Benefits of Implementation】 - Reduction in weighing time - Improvement in weighing accuracy - Reduction of material waste - Achievement of highly reproducible results

In the agricultural sector, particularly in fertilizer formulation, the precise blending of components is a crucial factor that influences both yield and quality. An excess or deficiency of fertilizers can adversely affect soil and crop growth. The XPR automatic dispensing balance from METTLER TOLEDO achieves a level of accuracy in weighing that is difficult to attain manually, contributing to improved precision in fertilizer formulation. 【Application Scenarios】 - Adjustment of fertilizer components - Addition of trace elements - Fertilizer formulation in research and development 【Benefits of Implementation】 - Reduction of fertilizer waste - Stabilization of quality - Shortening of work time

In mining sorting operations, accurate measurement of trace components is essential. In particular, precise measurement of samples is crucial for improving sorting accuracy. Inaccurate measurements can undermine the reliability of sorting results and lead to waste of resources. The Mettler Toledo XPR automatic dispensing balance enables a level of accuracy that is impossible with manual operation, contributing to the efficiency and quality improvement of sorting operations. 【Application Scenarios】 - Precise measurement of mineral samples - Quality control of the sorting process - Trace component analysis 【Effects of Implementation】 - Reduction of measurement time - Achievement of highly reproducible results - Reduction of waste of expensive materials

In the energy industry, accurate measurement of trace components is required in the development of new materials and quality control. Especially when dealing with expensive materials or rare substances, measurement errors can lead to increased costs and may compromise the reproducibility of research. The XPR automatic dispensing balance from METTLER TOLEDO addresses these challenges with high precision, featuring a minimum display of 2µg. 【Application Scenarios】 - Research and development of fuel cell materials - Quality control of solar cell materials - Preparation of energy storage materials 【Benefits of Implementation】 - Reduction of material waste - Improvement of research reproducibility - Shortening of work time