エンバイロ・ビジョン List of Products and Services

"Serum" is a paint that is resistant to salt and has high corrosion resistance, wear resistance, and chemical resistance. It is a paint developed for countermeasures against salt damage, which is a concern for factories located on coasts and shorelines. Due to its high durability, it is widely used not only for salt damage countermeasures but also as an alternative paint for hydrogen sulfide countermeasures, replacing tar epoxy and rubber lining. It does not require a primer for application, and when applying two coats, the same paint can be layered. It can be applied to various substrates without limitation, including aluminum, titanium, FRP, plastic, concrete, and composites. For more details, please download the catalog.

This is a case study of the adoption of "Ceram CERAM anti-corrosion paint" in the sedimentation tank of wastewater treatment facilities. At a certain copper smelter in Japan, tar epoxy paint had been continuously used for the anti-corrosion of the inner surface of the sedimentation tank. However, due to the wastewater conditions at the site, which contained strong nitric acid, the paint would begin to peel in parts within six months of application, leading to a recurring problem. The application of Ceram anti-corrosion paint to the sedimentation tank for wastewater treatment eliminated short-term peeling, effectively resolving this issue. 【Case Study 1】 ■ Location: A certain copper smelter in Japan ■ Purpose: Chemical-resistant anti-corrosion for the inner surface of the sedimentation tank ■ Product: Ceram CN200LV2 In selecting the paint, emphasis was placed on chemical resistance (acid resistance) and anti-corrosion properties, leading to the decision to use Ceram Coat "CN-200," which has excellent chemical resistance characteristics. After one year, there was no damage or peeling at all on the Ceram Coat film, representing a significant improvement compared to the conventional tar epoxy paint, which had experienced partial peeling within six months. Ceram Coat is the number one heavy-duty anti-corrosion paint, extremely resistant to acids, alkalis, and saltwater. *For more details, please refer to the PDF document or feel free to contact us.

The anti-corrosion coating Ceram Coat CN200 "KS-Ceram" is a non-solvent type heavy-duty anti-corrosion paint with high chemical resistance, designed as an alternative to rubber lining for interior surfaces. It serves as a substitute for repair materials for rubber lining. The anti-corrosion paint Ceram Coat, which replaces rubber lining, has a coating film that fully follows the thermal expansion and contraction of the substrate (steel plate) due to its high elasticity. Ceram, as an anti-corrosion paint replacing rubber lining, can be used not only on metal surfaces but also on non-metal materials such as plastic and concrete. The heavy-duty anti-corrosion paint Ceram, which is equal to or better than rubber lining, can be applied without the use of primers or special dedicated equipment. There are also paints available for interior and exterior use. 【Features】 The anti-corrosion paint Ceram is taking the market by storm as a substitute for rubber lining! - It has strong adhesion to the substrate (adhesion strength of over 30 MPa) - It has high wear resistance (wear resistance is about 10 times that of FRP) - It has high anti-corrosion properties (confirmed seawater corrosion resistance for over 20,000 hours in saltwater tests) - No primer is required for painting application - No special skills or equipment are needed for painting application - The film has high compressive strength (over 150 MPa) while also being highly elastic *For more details, please feel free to contact us.

The Seram STP EP "KS-Seram" is a heavy-duty anti-corrosion protective coating applied to the exterior surfaces of tanks, pipes, and equipment in chemical plants, steel mills, and food factories for equipment protection. It is also well-known as a paint specifically for salt damage prevention. Seram STP EP is primarily made from ceramic microparticles, which are solidified with epoxy resin, providing a coating that has strong adhesion to the substrate, eliminating the need for a primer during application. It allows for thick application, reducing the number of coats needed and significantly lowering construction costs. In addition to its high corrosion resistance against salt damage, it also possesses extremely high wear resistance, and can be applied to various substrates including steel plates, FRP, concrete, as well as smooth surfaces like stainless steel and galvanized steel sheets. **Features:** - Strong adhesion to the substrate (adhesion strength of over 30 MPa) - High wear resistance (approximately 10 times that of other epoxy-based paints) - High corrosion resistance against salt damage (over 10,000 hours in salt spray tests) - No primer required for application - Can be applied using commercially available painting equipment (airless, air gun, brush) without special skills - The coating has high compressive strength (over 150 MPa) while also being elastic *For more details, please refer to the documentation or contact us.*

The heavy-duty anti-corrosion coating "Ceram CN200 'KS-Ceram'" for rubber lining interiors is a non-solvent coated type of heavy-duty anti-corrosion paint that has high chemical resistance, serving as an alternative to rubber lining. It can be used as a repair material instead of rubber lining. The anti-corrosion coating Ceram, which replaces rubber lining, has a paint film that fully follows the thermal expansion and contraction of the substrate (steel plate) due to its high elasticity. The anti-corrosion coating Ceram can be used not only on metal surfaces but also on non-metal materials such as plastic and concrete. The heavy-duty anti-corrosion coating Ceram, which is equal to or better than rubber lining, can be applied without the use of primers or special dedicated equipment. There are also paints available for interior and exterior use. 【Features】 The anti-corrosion coating Ceram is taking the market by storm as a paint alternative to rubber lining! - It has strong adhesion to the substrate (adhesion strength is over 30 MPa). - It has high wear resistance (wear resistance is about 10 times that of FRP). - It has high corrosion resistance (confirmed seawater corrosion resistance for over 20,000 hours in saltwater tests). - No primer is required for painting application. - No special skills or equipment are needed for painting application. - The coating has high compressive strength (over 150 MPa) while also being highly elastic. *For more details, please feel free to contact us.