グローバル電子 List of Products and Services

The "Round OLED WEO128128D-CTP Model with Knob" is an expanded item equipped with a capacitive touch screen and a control knob for the module. This module incorporates the SSD1327 IC, with a typical logic supply voltage of 3V. It features the IT7259 touch panel IC, which detects points with a single finger and supports the I2C interface. 【Features】 ■ Built-in encoder allows operation beyond the touch panel ■ Display colors include white, yellow, and light blue ■ Supply voltage is 3V (typ.) with a duty cycle of 1/128 ■ Supports 4-wire SPI and I2C interfaces ■ Storage temperature: -30 to 70℃, Operating temperature: -20 to 50℃ *For more details, please refer to the related link page or feel free to contact us.

The MCP1012 is a primary-side startup IC used to start offline auxiliary switching power supplies that operate in conjunction with a secondary-side controller. It is designed for isolated converters. The control signal from the secondary side is not linear. The secondary-side controller (digital and/or analog) regulates linearly using advanced adaptive control schemes to improve performance and efficiency. 【Features】 ■ High voltage startup (rated 500V/700V) ■ Internal open-loop peak current mode (PCM) current regulator for startup ■ Receives external PWM commands from the secondary-side controller via an isolator (opto-coupler or pulse transformer) ■ Robust gate driver capable of driving a 2.2nF load at 65kHz *For more details, please refer to the related link page or feel free to contact us.

The "TA36 Series" is a circuit breaker that maintains the wide electrical specifications of the conventional TA35 Series (rated 0.05 to 20.00A) while incorporating a compact design and vibrant modern aesthetics. It has been upgraded from the TA35 to allow for a clearer tactile feedback when switching. 【Features】 ■ High circuit protection performance combined with modern design ■ Suitable for new applications that require attractive design ■ Number of poles: 1 to 2 poles ■ Switch type: ON/OFF switch or momentary ■ Mounting method: Snap-in *For more details, please refer to the related link page or feel free to contact us.

The WEO160128A is a COG graphic OLED display module with a diagonal size of 1.92 inches and a resolution of 160x128. This module incorporates the SH1108 IC and supports 6800/8080 parallel, I2C, and 4-wire SPI serial interfaces. With a 50% display area usage, it consumes 23mA at 12Vcc (Typ.). The driving duty is 1/128. 【Features】 ■ High contrast, fast response speed, low power consumption ■ Display colors: white and yellow ■ Supply voltage - Logic: 3V / Display: 12V ■ Interfaces: 6800, 8080, I2C, SPI ■ Storage temperature: -40℃ to 85℃, Operating temperature: -40℃ to 80℃ *For more details, please refer to the related link page or feel free to contact us.

The "Ag105" is a module for charging control from solar panel generation to secondary batteries such as lithium-ion (Li-Ion) batteries and lithium polymer (Li-Po) batteries. It can use a fixed DC power supply as the input power source, and since the control circuit adopts a modular design, it does not require auxiliary (external) components, allowing for a simple and low-cost configuration of secondary battery backup systems tailored to various applications. The design takes into consideration the important aspect of battery longevity and is optimized to enhance the power generation of solar panels using intelligent charging technology. 【Features】 ■ Multifunctional battery charging controller (JEITA compliant) ■ Charging from solar panels or fixed DC power supply ■ Charging profile selection (I2C interface) ■ MPPT (Programmable Maximum Power Point Tracking) specification ■ Wide input voltage (11V to 36V) *For more details, please refer to the related link page or feel free to contact us.

Products based on the "AcceleRate APF6/APM6 series" have been adopted as the standardized connector for "COM-HPC" (using two pairs of connectors with 400 pins in two rows for a total of 800 pins). We provide the best solution to meet the demands for high-speed signals and their scalability in future embedded systems. 【Features】 ■ Transmission speeds of up to 32Gbps per channel ■ Maximum of 4096 Gbps (2088Gbps per square inch) ■ Supports PCIe 5.0 (32GT/s) ■ Supports 100Gb (4 × 25Gb) Ethernet ■ BGA mounting ■ Fixtures and tools are available to prevent warping during mounting *For more details, please refer to the related link page or feel free to contact us.

The "DKIV-1 series" is a common mode choke coil suitable for single-phase applications with a rated current of 10 to 50A. You can choose between a ferrite ring core or a nano-crystal core specification. Additionally, a significant update from the conventional DKIH series is the adoption of a vertical open design, which not only reduces weight but also achieves a substantial space-saving in installation area. 【Features】 ■ Rated Voltage - IEC, UL: 300VAC, 450VDC - CSA: 250VAC, 350VDC ■ Operating Frequency: 0 to 400Hz ■ Rated Current: 10, 12, 16, 20, 25, 32, 40, 50A ■ Rated Inductance: 0.15 ~ 8.20 mH *For more details, please refer to the related link page or feel free to contact us.

The "PFD2015 & PFD3215 series" are coupled inductors for small, low-profile baluns with a turns ratio of 1:1, suitable for use as the front end balun of radio devices in the 10MHz to 750MHz range. Despite the winding, they are low-profile and compact at 1.5mm, with low loss. They enable high performance in radio equipment. 【Features】 ■ Compact - PFD2015: Width 2.29mm, Height 1.52mm - PFD3215: Width 3.32mm, Height 2.33mm ■ Low profile: Maximum height 1.5mm ■ Floating type balun ■ Low insertion loss *For more details, please refer to the related link page or feel free to contact us.

"B15H2HRRC" is an original product developed for biosensors, particularly suitable as a 2-in-1 (red + infrared) LED for pulse oximeters. By combining it with the photodetectors handled by the company, easy design and development are possible. In addition to the 2-in-1, it can also be customized to meet the demands for 3-in-1 or 4-in-1 LEDs that incorporate green or phototransistor functions for various biosensors. 【Features】 ■ Red LED output: IF20mA, 1-2mW/sr ■ Infrared LED output: IF20mA, 1-3mW/sr ■ Rank specification can be considered based on the yield of each chip ■ Customization is available for swapping chips to desired wavelengths *For more details, please refer to the related link page or feel free to contact us.

The "MCP1811/12 Family" is an LDO that provides a maximum drop voltage of 600mV at ultra-low quiescent current of 250 nA (Iout=0) with output currents of 150mA (MCP1811) and 300mA (MCP1812). Fixed output voltage products are also available, making them suitable for ultra-long-life LDO applications that leverage high current (300mA) and ultra-low power consumption (250nA). 【Features】 ■ Utilizes ceramic capacitors to achieve low output noise, low cost, and small size ■ Ideal for ultra-long-life LDO applications that take advantage of high current and ultra-low power consumption ■ Input voltage range: 1.8V ~ 5.5V ■ Output voltages: 1.0V, 1.2V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V, 4.0V (Options available for 1 to 4V) *For more details, please refer to the related link page or feel free to contact us.

The "PDB08 Series" is an ultra-compact rotary potentiometer designed with a miniaturized exterior and an insulated shaft. It is suitable for professional audio, lighting fixtures/devices, low/medium risk medical devices, industrial automation control, and applications requiring miniaturization and adjustment. You can choose between single output and dual output, with the dual output capable of providing the same output from two terminals simultaneously. 【Features】 - The shaft is made of plastic, with height options of 1mm or 4.5mm. - Center click can be selected as an option. *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

The WEA025664A features a mounted circuit board with a diagonal size of 2.08 inches and a resolution of 256×64 organic EL display. The circuit board size is 70×22mm (with 7×1 metal pins). This organic EL display incorporates an SSD1362, supports 4-bit grayscale images, and has a driving duty of 1/64. 【Features】 ■ Display colors: white and yellow (2 colors) ■ Logic power supply voltage: 3V or 5V ■ Storage temperature: -40℃ to 85℃ ■ Operating temperature: -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "MIC21LV32/33" is a dual-phase synchronous buck controller suitable for applications requiring an output voltage with a maximum output of 50A. It features high-speed transient response performance through an adaptive fixed on-time method. It operates with a programmable switching frequency of 100kHz to 1MHz per phase, with an accuracy guaranteed to ±1%. 【Features】 ■ Input Voltage Range ・4.5V to 36V ・2V to 36V (with external power supply of 5V) ■ MIC21LV32: Up to 8-phase drive in stack connection ■ MIC21LV33: 2-phase drive with phase shade function * An English version of the catalog is available for download. * For more details, please refer to the PDF materials or feel free to contact us.

The "Q Strip" is a connector that improves electrical performance through surface mount signal contacts and an integrated ground plane between two rows of signals. We offer approximately eight types of mating heights ranging from 5mm to 30mm. Additionally, we provide options such as guide posts for non-visual mating and positioning pins and locking clips to properly position the connector before reflow. 【Features】 ■ Performance: Up to 14.0GHz/28Gbps ■ Integrated ground plane ■ Solutions for BtoW with fine wire coaxial cable assemblies ■ Proven adoption as specified connectors in various industry standards and evaluation boards ■ Robust mating options and hardware available * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

"WINSTAR Display" is an electronic component with various options tailored to meet customer needs. We offer a range of custom designs including display shapes and sizes, silk screen printing, backlight configurations, pins and connectors, cables, touch panels or custom cover glass, ZIF or custom printed circuit boards, and plastic covers/cases. 【Features】 ■ Communication interfaces such as CAN/RS232/RS485/USB are available ■ The shape of the circuit board can be selected to the desired size ■ Installation methods for the product can be developed according to requirements ■ Input interfaces such as TP/membrane switches/tactile switches are available ■ Compatible with flat cables/pin headers/various connectors *For more details, please refer to the related links or feel free to contact us.

The 『CDDFN6-3312P』 is a TVS diode array that uses a feed-through structure to minimize the impact on impedance. The circuit protection level against electrostatic discharge is IEC61000-4-2 Level 4. For high-speed ports exceeding 12Gbps, such as HDMI 2.1 and USB 3.1, it is important to maintain the impedance of the signal lines. In addition to the feature of minimizing changes in the impedance of the data lines, the ultra-low capacitance performance results in very little waveform distortion on each channel. 【Features】 ■ ESD Contact +8kV Air +15kV ■ Operating Voltage: 3.3V ■ Breakdown Voltage: 4.5V min ■ Clamp Voltage: 13V ■ Operating Temperature Range: -55 to +85℃ ■ RoHS10 compliant * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The DJT090A0X43-SRPZ is a non-isolated DC-DC converter that supports an input voltage of 7.0 to 14.4V and an output voltage of 0.5 to 2.0V, supplying an output current of 90A. The compact package (23×14mm) is suitable for high-density mounting. The black box function (via PMBus) allows for the checking of fault logs, which is helpful for diagnosing any potential failures. 【Features】 ■ PMBus functionality (monitoring and control via digital communication) ■ Overvoltage/undervoltage/overcurrent/overheat protection ■ Remote On/Off function, remote sense function ■ Black box function ■ Up to 8 parallel operation ■ Simulation tool (operable online) available * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "FMBD EP Series" is a newly developed line filter that incorporates a two-stage filter with high noise attenuation performance into a lightweight and compact housing. In addition to a wide rated current range (16–230A) and operating temperature range (-40–100℃), you can choose from a high voltage specification rated at 760VAC and a low leakage current specification of 2.5mA or less. 【Features】 ■ Rated current: 16–230A @ 50℃ ■ Rated voltage: 520/760VAC, 50/60Hz ■ Number of filter stages: 2 ■ Leakage current: Standard specification 9.4mA or less / Low leakage current specification 2.5mA or less ■ Weight: 1.0–5.9kg ■ Operating temperature range: -40–100℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "CX Series/CPV Series" are overcurrent protection products suitable for storage batteries and battery systems. The "CX Series" is an ultra-compact circuit protector capable of handling up to DC600V due to its unique arc extinguishing structure. The "CPV Series" consists of fuse holders and fuse sets compatible with DIN rails. 【Features of the CX Series】 ■ Fluid electromagnetic circuit breaker ■ Supports high current and high voltage DC applications (600V) due to its unique arc extinguishing structure ■ Improved overall performance and reliability of the breaker ■ Compact size designed for space-saving *For more details, please refer to the PDF materials or feel free to contact us.

The "AG5400" is a PoE+ module designed for high efficiency with a maximum output of 30W in a single inline package. This new model with high efficiency design reduces losses while maintaining a compact form factor. As a result, it makes considerations for areas with limited space, sealed structures, and high-temperature operating environments easier compared to conventional products. It is pin-compatible with the existing "AG5300 series," allowing for direct replacement and use. 【Features】 ■ Compliant with IEEE802.3 af/at specifications, POE+ ■ Maximum output of 30W and high efficiency (93.3% typ.) ■ Output voltages: 5V, 12V, 24V ■ Built-in circuit protection features for overload, short circuit, and high temperature ■ Compact SIL package: L57mm x W18mm x H14mm * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "016008C series" is a wound-type RF chip inductor suitable for high-frequency applications such as mobile phones, wearable devices, and LTE/5G/IoT networks. We offer a lineup with inductance values ranging from 0.45 to 24nH. Despite its very small size of 0.47×0.28×0.35mm, it features a high Q value and low DCR to minimize insertion loss in impedance matching circuits. 【Features】 ■ One of the smallest in the world ■ Very high Q value ■ Very low DCR ■ Inductance range of 0.45 to 24nH * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

We handle the "Sensing Packaging Solutions" manufactured by Harbatech. The company has the technology to integrate multiple components into a single package, starting with the development and manufacturing of LEDs, and has a proven track record in custom development of sensors and more over many years. This product allows for the addition of other functions or enhancement of performance to existing sensors. The wafers that can be handled are up to 8 inches, and bonding pads can be accommodated down to a minimum of 50μm. 【Features】 ■ Oblique W/B (Wire Bonding) is possible ■ Components can be mounted under W/B due to oblique W/B ■ Gold wire up to Φ5mm can be used ■ Components within the package can be SMD mounted * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the general-purpose heat sink '60NF124' handled by Global Electronics. In response to market demands, we have added a hollow type to our lineup. It is suitable for cooling with two 60mm fans placed side by side, and due to its hollow shape, when used with forced air cooling, the heat sink itself acts as a wind tunnel. Additionally, we can accommodate custom processing such as L dimensions and hole machining. Please feel free to contact us when you need assistance. 【Features】 ■ Capable of cooling multiple semiconductor devices on multiple surfaces ■ Ideal for 60mm square fans ■ Flexible processing options available even for small quantities *For more details, please refer to the related links or feel free to contact us.

To meet the needs for low latency, multipoint connectivity, and high-speed wireless routers, WiFi 6E (IEEE 802.11ax) has been standardized. We offer the Johanson Technology's WiFi 6 compatible multilayer ceramic chip bandpass filters, '5500BP41A0665 / 6610BP41A1030', which support the 5GHz and 6GHz bands. The '5500BP41A0665' has a passband of 5.1 to 5.8GHz, while the '6610BP41A1030' has a passband of 6.1 to 7.125GHz. Additionally, our unique technology enables a steep transition region that achieves over -32dB attenuation, preventing interference between signals. 【Features】 ■ Multilayer ceramic chip bandpass filter ■ Dimensions: 3225 (EIA1210) ■ HIGH-Q characteristics ■ Over -32dB attenuation ■ Steep transition region * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The MCP1792/3 is an automotive-compatible high voltage input low dropout (LDO) regulator with a supply capability of 100mA output current. It has a wide operating temperature range of -40 to 150°C and an input voltage range of 4.5 to 55V, making this device suitable for 12 to 48V power rails and high voltage battery packs. The "MCP1792" is a 3-pin version, while the "MCP1793" is a 5-pin version with a shutdown feature (SHDN pin). 【Features】 ■ Input operating voltage: 4.5V to 55V ■ Output voltage range: 3.3V, 5.5V ■ Output current: 100mA (typ.) ■ Under Voltage Lockout (UVLO): 2.7V (typ.) ■ Tolerance: ±2.0% (typ.) *For more details, please refer to the PDF document or feel free to contact us.

The WFI32 family is a standalone Wi-Fi module that supports 2.4GHz 802.11b/g/n wireless modes. The "WFI32E01PE" includes the "PIC32MZW1 series" and is equipped with a rich set of peripherals such as Ethernet, CAN/CAN-FD, USB, and CVD Touch. Additionally, it comes with a pre-provisioned Trust&GO package for Azure, AWS, Google Cloud, and private clouds, enabling the establishment of secure and reliable IoT connections. 【Features】 ■ 200MHz MIPS core ■ I/F supporting IEEE 802.11b/g/n WLAN + built-in antenna ■ Security with WEP/WPA2/WAP3, pre-provisioned for various clouds ■ Rich set of peripherals including Ethernet, CAN/CAN-FD, USB, and CVD Touch * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The ExaMAX series is a high-density backplane system that offers design flexibility suitable for various applications. The Flyover cable supports 112Gbps PAM4 for BtoW and 56Gbps PAM4 for BtoB. In addition to improved bandwidth and transmission distance, signal integrity and eye pattern opening have also been enhanced. 【Features】 ■ Stable contact points at two locations ■ Compliant with Telecordia GR-1217 CORE standards ■ Minimal residual stubs ■ Clear separation of contact points ■ Low insertion force * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "SM91502ALA-E" is a signal transformer specialized for battery management systems. It supports serial daisy chain and IsoSPI communication. Developed for battery cell controller ICs from ADI, NXP, and TI, it is positioned as a recommended circuit component. 【Features】 ■ Integrated transformer and choke coil, single channel ■ Operating temperature range: -40 to +125℃ ■ RoHS 10 compliant, halogen-free *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

The "EQCO125X40" is a CoaXPress 2.0 transmitter/receiver/repeater chip designed to transmit signals simultaneously over a single cable or PCB trace pair. In one direction, a downlink signal encoded with 8b/10b is transmitted at 1.25Gbps to 12.5Gbps. In the opposite direction, a low-speed uplink signal encoded with 8b/10b is transmitted at 20.833Mbps or 41.666Mbps. 【Features】 ■ Equalizer for 1.25Gbps over 130m Belden 1694A coaxial cable or 12.5Gbps over 40m coaxial cable ■ Simultaneous signals over a single cable ・ Downlink up to 12.5Gbps ・ Uplink at 21 or 42Mbps * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

EZPlastics is a software development and product development support company headquartered in Vietnam, established by NTQ. We provide one-stop services for the design, prototyping, mold design and manufacturing, and mass production of plastic resin molded parts. With extensive experience from conceptual design to prototyping and mass production, we are highly regarded by many Japanese companies. 【Business Content】 ■ Design ■ Prototyping ■ Mold Design and Manufacturing ■ Mass Production *For more details, please refer to the PDF materials or feel free to contact us.

The "Diplexer" is a product that separates signals received and transmitted by a multi-band antenna by frequency band. This has been made possible by the technology developed by Johansson Technology in low-pass and band-pass filter development. We offer three models that support three frequency bands: 2.4–2.5GHz, 4.9/5.1–5.85GHz, and 6.1–7.2GHz: "2450DP14A6000/6100" and "2450DP14B6100." 【Features】 ■ Laminated ceramic chip band-pass filter ■ Dimensions are 3225 (EIA1210) ■ HIGH-Q characteristics ■ Attenuation of -32dB or more ■ Sharp transition region * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.

The "Waterproof IP67 USB 2.0/3.0 Connector" offers reliable protection against harsh outdoor environments and mechanical stress. The housing can be selected in either metal or resin, making it suitable for applications that require lightweight solutions. With a secure lock using a bayonet or M28, it can be protected with a protective cap when not in use. 【Features】 ■ Panel mounting direction can be selected ■ Secure lock with bayonet or M28 ■ Patch cords with harness processing can be supplied ■ Protection with a cap when not in use * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The WEO012864AA is a 16 (4-bit) grayscale display with an SSD1327IC integrated into a graphic display. It can communicate via 6800/8080 parallel, 4-wire SPI, and I2C interfaces. If grayscale functionality is not required, the WEO012864A model can be selected. 【Features】 ■ Organic EL ■ 1.54 inches ■ COG structure ■ Communicates via 4-wire SPI and I2C interfaces ■ The WEO012864A model can be selected if grayscale functionality is not needed * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

"FireFly" is a future-proof mid-board optical interconnect solution with performance of up to 28 Gbps per lane and paths of up to 56 Gbps. The system, designed to enable compatibility between copper wires and optical cables using the same high-performance connector set, enhances signal integrity. Furthermore, it allows for longer signal paths. 【Features】 ■ High-speed performance of up to 28 Gbps per lane ■ ×4 and ×12 designs ■ Various built-in heat sink and end-to options ■ Compatibility between copper wires and optical cables *For more details, please refer to the PDF materials or feel free to contact us. *You can download the English version of the catalog.

The "JYF-1024600A080N303H-VB (JY20F48)" is a 10.1-inch IPS TFT LCD module with a resolution of 1280×800 dots. It operates at a temperature range of -30℃ to 80℃ and is compatible with LVDS interface. The brightness is 1000cd/m² (TYP), and it has a backlight lifespan of 50000H (MIN). Additionally, it can be equipped with optional AG/AR/AF coatings and complies with IP standards (waterproof and dustproof). 【Features】 ■ Viewing angle: Left 85 / Right 85 / Up 85 / Down 85 degrees (Typ.) ■ LVDS interface ■ Operating temperature: -30℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "GA/MISO Series" is a self-developed analog isolation amplifier that has over 30 years of proven performance, achieving high precision, high reliability, and miniaturization. It supports analog input and output with an input range of ±5V and ±10V. Additionally, all products come with an integrated power supply circuit. This product has a significant track record of being adopted in applications for railways and power generation equipment, as well as in various industrial devices that require high voltage isolation for analog instrumentation. 【Features】 ■ There is no current leakage from the output side (power side) to the input side, ensuring safety and preventing electric shock. ■ It operates even when there is high voltage (1kVACrms to 5kVACrms) between the input and output, allowing for signal amplification in high voltage areas. ■ It operates even in the presence of extremely high noise between the input and output, enabling the removal of common-mode noise. *For more details, please refer to the PDF materials or feel free to contact us.

We handle AC adapters from Ktec (Kuanrech Intelligent Power), which has a proven track record of adoption by numerous users, primarily in the consumer market and telecommunications equipment market worldwide. They offer a rich product lineup ranging from 3.5W to 120W, including wall-mounted, desktop, and USB types, as well as custom options. Our own factory in Cambodia has a production capacity of 250,000 units per day, allowing us to accommodate large orders. 【Features】 ■ Own factory in Cambodia with excellent production capacity (over 250,000 units/day) ■ Cost efficiency through a consistent production system (90% of components, excluding electronic parts, are produced in-house) ■ Product development using new technologies - AC adapters with output ranging from 3.5W to 120W - USB Type-C adapters * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "AcceleRate Series" is a high-density multi-row mezzanine strip with a rated 56Gbps PAM4 and a 0.635mm pitch. It features high-speed Edge Rate contacts designed for high-speed, high-durability applications. Additionally, the contact surfaces are milled to achieve a smooth mating surface. This reduces contact wear and improves durability and lifespan. 【Features】 ■ Extremely high density with a total I/O count of up to 240, with development reaching up to 240 ■ Low-profile with a stack height of 5mm ■ Slim width of 5mm ■ 4-row design with 10 to 60 pins per row (development totals 70 to 100 pins) * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "FT5/FS5 Series" is a high-speed BtoB connector with a floating mechanism. It provides a 0.50mm float mechanism in the X and Y directions, minimizing fitting alignment errors. It features up to 60 positions of contact, with options for vertical and right-angle designs. 【Features】 ■ Provides 0.50mm (.0197") float in the X and Y directions ■ Suitable for multiple connectors on a circuit board ■ Up to 60 floating contacts ■ Options for body height and right-angle design * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

For applications that require protection for displays, we can equip them with hard cover lenses to protect against physical damage. Winstar offers three options for cover lenses for 7-inch TFT-LCD modules: 0.7mm, 1.8mm, and 3.0mm. The higher the IK code, the greater the impact protection. The IK code is an international classification grade code regarding external impact protection for electronic device enclosures. Custom cover lenses are also available. 【Product Lineup】 ■XX06: Thickness 0.7mm ■XX07: Thickness 1.8mm ■XX08: Thickness 3mm *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

The model "WEP012864Q-CTP" has a diagonal size of 2.7 inches and a resolution of 128x64. With 50% of the display area used, it consumes 175mA at 3.0V VDD (Typ.), and the driving duty is 1/64. This module is equipped with a capacitive touch panel, incorporating the GT911 IC and an I2C interface. You can connect your equipment and products via wire. It also comes with mounting holes for fixing, which enhances the efficiency of your development and work. 【Features】 ■ Module size: 82.0×47.5×8.65mm ■ Display colors: four colors - white, yellow, sky blue, and green ■ Logic power supply voltage: 3.0V ■ VCC circuit is provided on the board ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The LVDS interface of the 『WF123BSWAYLNB0』 is an electronic component that accelerates data transfer while using low voltage. To improve noise performance, it is less susceptible to EMI and crosstalk issues, as well as the influence of high-bandwidth peripherals that require high-resolution graphics and high frame rates, allowing the transmitting device to be placed far away from the display. The brightness is 650 nits (Typ.), and the contrast ratio is 1100:1 (Typ.). The presence of a touch panel can be selected. 【Features】 ■ Module size: 364.0 × 175.0 × 10.48mm ■ LCD type: TFT, Normally White, Transmissive ■ Power supply voltage (VCC): 3V to 3.6V ■ Resolution: 1920RGB(H) × 720(V) pixels ■ Storage temperature: -40℃ to 85℃ ■ Operating temperature: -30℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

SCHURTER's "CHS Series" is a capacitive touchless switch. This operating method eliminates the need to drill holes in the housing surface, allowing the product to be simply adhered to the backside of insulating materials such as glass, plastic, or wood. It does not malfunction due to wiping of the switch area or liquid adhesion, and since there are no moving parts, it has a product lifespan of over 100 million switching cycles. 【Features】 ■ Detection method: Capacitive (touchless) ■ Switching operation: Momentary (N/O) ■ Supply voltage: 5–28VDC ■ Operating and storage temperature range: -40 to 85°C ■ Product lifespan: Over 100 million switching cycles * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "0805RB Series" is a wire-wound ferrite chip bead manufactured by Coilcraft. It offers a wide lineup with impedance characteristics that accommodate various frequency bands. It is capable of removing noise that overlaps with the DC bias or DC input of RF amplification circuits. Furthermore, it provides superior performance compared to conventional ferrite beads due to its high self-resonant frequency (SRF), low DC resistance (DCR), and large current capacity. 【Features】 ■ Optimized impedance characteristics ■ Very high SRF ■ Low DCR ■ High current handling * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The GDT25 is an overvoltage protection gas discharge tube manufactured by Bourns, a circuit protection component manufacturer. It is designed using the manufacturer's proprietary advanced computer simulation technology and comes in an environmentally friendly compact surface mount package, with spark-over voltages available in four types: 75V, 90V, 350V, and 600V. With a wide operating temperature range, low capacitance, and low insertion loss, it is an ideal solution for protecting industrial communication and high-speed information communication technology (ICT) devices. 【Features】 ■ Compact size: 5.40 × 4.19 × 5.40(H) ■ Operating temperature range: -55 to +125℃ ■ RoHS10 compliant * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.