アメフレック List of Products and Services

【Condensation & Energy Saving Measures】 Low Humidity Outdoor Air Processing Unit "Eco Changer" ECU ------------------------------------------------------------- The ECU has emerged as a solution for preventing condensation in manufacturing environments that dislike humidity. The low humidity outdoor air processing unit "Eco Changer ECU" efficiently converts 【Outdoor Air 33℃ 60% RH】 　　↓ 【Supply Air 24℃ 40% RH】. By adopting a sensible heat exchanger, it eliminates the need for reheating heaters, achieving high energy efficiency and significantly reducing running costs. It also provides comfortable conditions in low-temperature workrooms without causing condensation. In terms of installation, it features an outdoor installation unit type, greatly reducing on-site construction work. (*The ECU-3000 is a separate refrigeration unit.) It can be proposed for various scenes in manufacturing environments that dislike humidity, such as powder product factories, cut vegetable factories, dairy product factories, bakery and confectionery factories, loading areas and ante-rooms of cold storage, and clean rooms. Please feel free to contact us.

The "Hylan" evaporative cooler is chosen for zone air conditioning in large spaces that are difficult to manage with air conditioning units. - Large fans of 36/24 inches blow cool air over a wide area - Adjustable airflow (50-100%) - Excellent durability - No compressor or refrigerant gas used - Can be installed in large indoor spaces such as factories and warehouses since it does not emit heat - Provides a cool breeze with moisture that is gentle on the human body * When using outdoors, please install it in a sheltered area such as under an eaves or inside a tent to avoid rain. * Upon unboxing and during initial operation, there may be an odor from the resin contained in the cooling pads (material: cellulose). This will gradually decrease after a few days of operation. It is not a defect in the product, so please use it with confidence.

Damage from collisions," "refrigeration equipment refrigerant leaks," "fire risks from welding," "heatstroke from extreme heat," and "condensation and mold due to humidity" are troubles that occur in the workplace. This document introduces products and technologies to prevent each of these troubles in advance. 【Product Lineup】 ■ To prevent damage to facility walls and columns 　"Resin guard material"… Protects columns and walls from collisions with forklifts and other equipment. ■ To prevent refrigerant leaks 　"Pinhole leak sealant"… Can seal 99% of pinholes up to approximately 300 microns. ■ To prevent fire risks from welding 　"One-touch fittings for refrigerants"… Connects refrigerant piping with one touch without using fire or tools. ■ To prevent heatstroke 　"Evaporative cooling machine"… Supports large air volumes. Keeps wide spaces cool and comfortable. ■ To prevent condensation and mold 　"Portable dehumidifier"… Compact and low-cost. High power, made in Japan. 　"Low-humidity outdoor air conditioning unit"… Energy-saving outdoor unit for factories using sensible heat exchangers. 　"Mold treatment technology"… Provides long-lasting anti-mold effects with a single treatment. *Detailed materials explaining each product are currently available! For more information, please refer to "PDF Download.

The cool breeze from the highland creates airflow and brings comfort. It improves the working environment during summer, making it more pleasant and comfortable, and helps prevent heatstroke. It requires no installation and is easy to move, making it a convenient solution for heat countermeasures, especially in large work areas where air conditioning is difficult to implement. - Large fans blow cool air over a wide area - Adjustable airflow (50-100%) - Excellent durability - Eco-friendly air conditioning without a compressor or refrigerant gas - Since it does not emit heat, it can be installed in large indoor spaces such as factories and warehouses - Provides a gentle coolness that is kind to the human body, with refreshing moist air * When unpacking this product and during the initial operation, there may be an odor from the resin contained in the cooling pad (material: cellulose). This will gradually decrease after a few days of cool air operation. Frequent water changes in the tank will help resolve it more quickly. This is not a defect in the product, so please use it with confidence.

【Highland HP36BX】 Fan diameter: 36 inches (900 mm, 5 blades) Airflow: 21,100 m³/h Power supply: Single-phase 100V 50/60Hz Rated output: Fan motor 750W, Pump 120W Power consumption: 940W *Value at 100% airflow operation External dimensions: Width 1580 × Depth 750 × Height 1770 mm Product weight: 100 kg Effective water storage capacity: 224 liters - Large fan delivers cool air over a wide area - Airflow adjustable (50-100%) - Excellent durability - No use of compressors or refrigerants. - Since it does not emit heat, it can be installed in large indoor spaces such as logistics centers, factories, and warehouses - Gentle, refreshing breeze that is kind to the human body * When unpacking this product and during the initial operation, there may be an odor from the resin contained in the cooling pads (material: cellulose). This will decrease after a few days of cool air operation. Frequent water replacement in the tank will expedite the resolution. This is not a defect in the product, so please use it with confidence.

【Hylan HP24BXR】 Fan Diameter: 24 inches (630 mm) Airflow: 9,970 m³/h Power Supply: Single-phase 100V 50/60Hz Rated Output: Fan Motor 750W, Pump 120W External Dimensions: Width 1340 × Depth 700 × Height 1655 mm Product Weight: 76 kg Effective Water Storage Capacity: 182 liters Features of Hylan - Large fan delivers cool and refreshing air over a wide area - Adjustable airflow (50-100%) - Excellent durability - No compressor and does not use refrigerant gases - Can be installed in large indoor spaces such as logistics centers, factories, and warehouses due to no heat discharge - Gentle and refreshing cool air * When unpacking this product and during initial operation, there may be an odor from the resin contained in the cooling pads (material: cellulose). This will decrease after a few days of cool air operation. Frequent water replacement in the tank will help resolve it more quickly. This is not a defect in the product, so please use it with confidence.

Proper ventilation to "avoid enclosed spaces" Energy-saving low dew point outdoor air treatment unit "Eco Changer" ------------------------------------------------------------- "Introduction of outdoor air" is essential for proper ventilation measures. When outdoor air is brought directly into the room, the efficiency of heating and cooling decreases, so fresh air treated by an outdoor air treatment air conditioning unit is introduced. Especially in summer, "high temperature and high humidity outdoor air" places a heavy thermal load on the air conditioning unit and can cause condensation due to temperature differences. Therefore, it is necessary to treat it into "low humidity air" before sending it indoors, which can be described as "high-quality supply air." By supplying low humidity air treated by the outdoor air treatment air conditioning unit, "stability of indoor temperature and humidity control" and "suppression of condensation" can be achieved. Pursuing the performance of outdoor air treatment air conditioning units that can introduce outdoor air as "high-quality supply air," the energy-saving low dew point outdoor air treatment air conditioning unit "Eco Changer" has been developed to enhance efficiency and energy-saving properties with a sensible heat exchanger. Please feel free to contact us.

The evaporative cooler "Hylan" has pursued a reduction in power consumption while increasing airflow compared to conventional models. Additionally, the water storage capacity has been increased, allowing for longer continuous operation, making it even easier to use. Utilizing evaporative cooling to produce cool air, "Hylan" is well-regarded as an energy-efficient eco air conditioning solution for "heat countermeasures" and "heatstroke prevention," and is adopted for "zone air conditioning in large workspaces where conventional air conditioning is difficult to implement," such as factories and warehouses. ■ Features - Large fan delivers cool and refreshing air over a wide area - Adjustable airflow from 50% to 100% - No compressor, thus no use of refrigerant gases - No heat discharge ⇒ Can be installed indoors - Gentle "moist cool air" that doesn't get too cold for the body - Low-cost eco air conditioning - No installation work required (single-phase 100V) & easy to move with casters (*fixed with stoppers during operation) ■ Recommended Uses - For large work areas where conventional air conditioning is difficult to manage - Factories, warehouses, sports venues, greenhouses, outdoor restaurants, event venues, etc. *For outdoor use, please install in areas protected from rain, such as under eaves or inside tents. *Due to its design, water droplets may splash.

The HIRAN BXR series has increased air volume while reducing power consumption compared to conventional models, making it an easier-to-use and energy-efficient eco air conditioning system. For heat countermeasures, the evaporative cooler "HIRAN" achieves "coolness" at an overwhelmingly low price. ■ Features - Large fan delivers cool air over a wide area - Adjustable air volume from 50% to 100% - Does not use a compressor, so no refrigerant gases are used - No heat exhaust ⇒ Can be installed in indoor spaces such as factories and warehouses - Utilizes evaporative cooling, providing a gentle "moist cool breeze" without overcooling - Low-cost eco air conditioning - No installation required (Power: single-phase 100V) & easy to move with casters (fixed with stoppers during operation) ■ Recommended Uses - For heat countermeasures in large work areas where air conditioning is difficult - Used in factories, warehouses, sports venues, greenhouses, outdoor restaurants, event venues, etc. *For outdoor use, please install in areas protected from rain, such as under eaves or inside tents. *Due to its design, water droplets may splash.

**Heat Stroke Prevention, Heat Measures, and Energy Saving** The Hiran is an energy-efficient eco-type cooling fan that utilizes evaporative cooling. The large volume of cool air produced by the large fan reaches wide and far, creating airflow that enhances the "coolness" of the working environment. With an overwhelmingly low price, no installation required, a 100V power supply, and easy mobility with casters, it makes it easy to implement "heat stroke prevention" and "heat measures." **Features** - Large fans of 36/24 inches blow cool air over a wide area - Adjustable airflow from 50% to 100% - No compressor or refrigerant gas used - No heat exhaust ⇒ Can be installed in large indoor spaces like factories and warehouses - Gentle evaporative cooling that does not overcool, providing "moist cool air" - Low-cost eco-friendly air conditioning - No installation required (single-phase 100V power supply) & easy to move with casters **Recommended Uses** - Zone cooling for large work areas where air conditioning is difficult to manage - Facilities such as factories, warehouses, gymnasiums, stadiums, event venues, greenhouses, livestock barns, outdoor restaurants, and concourses *For outdoor use, please install in areas protected from rain, such as under eaves or inside tents.* *Due to its structure, water droplets may splash.*