CPC（コールダー・プロダクツ・カンパニー）・ジャパン・オフィス List of Products and Services

SteamThru, which allows for the sterile connection of stainless steel piping and bags, has become an indispensable product in the biopharmaceutical industry and is widely used around the world. We have launched AseptiQuikSTC, a product that combines the sterile connection connector SteamThru with AseptiQuik, which allows for the sterile connection of tubes under general environmental conditions. Previously, it was necessary to connect all bags and tubes to SteamThru in advance and sterilize them, but with the launch of AseptiQuikSTC, it has become possible to freely make sterile connections between stainless steel piping and sterile tubes or sterile bags equipped with AseptiQuik.

By attaching a resin sanitary joint to the cartridge filter, it becomes possible to connect the sanitary joint with the one-touch joint MPC series and MPX series, allowing for instant filter replacement. The conventional stainless steel Sanicquick could not undergo gamma sterilization with the cartridge filter, nor could it be disposed of as is. By using a resin clamp, it becomes completely disposable, reducing operational risks and allowing for instantaneous filter replacement. Product numbers: MPC3301239, MPX3301239, MPC3301639, MPC44012T39M, MPX44012T39M, MPX44024T39M For more details, please contact us.

Facilitates sanitary joint connections in single-use piping for biopharmaceutical manufacturing.

Revolutionary! It enables rapid and easy high-flow sterile connections even in general environments. The large tube diameters of 3/4 inch (19.0 mm) and 1 inch (25.4 mm), along with a shape that does not distinguish between male and female, simplify the system and reduce the risk of incorrect connections. Due to its robust structure, there is no need for clamps, fixtures, or welding with tubes. In biopharmaceutical manufacturing, it can be used with the quality expected from the single-use connection technology industry by accommodating interchangeable 3/4 inch and 1 inch flow applications in large-scale bioprocess manufacturing. The structure allows for connections without distinguishing between male and female, resolving issues where handheld bags cannot connect due to both being male. Since there is no distinction, connections can be made even without bags with male or female parts. A sound is produced twice during the connection process to indicate completion. Before pulling the membranes, the structure requires that two membranes be clipped together securely, preventing issues where only one membrane is pulled or both cannot be pulled simultaneously, which could lead to contamination or the need to discard batches due to such concerns.

Revolutionary! A sterile connection connector without male or female parts! It can connect to any component, reducing inventory by half! Industry-leading high-temperature and pressure resistance. The "G" in AseptiQuik G stands for Genderless. With a symmetrical structure, it can connect without male or female parts, eliminating issues where bags with male connectors cannot connect to each other. Since there is no distinction between male and female, it can connect without the need for bags with male or female parts. When connecting, it always notifies you of completion with two click sounds. The structure requires clipping two membranes together before pulling, preventing issues such as accidentally pulling only one membrane or pulling them simultaneously, which could cause contamination or lead to lot disposal due to contamination concerns. AseptiQuik G is not compatible with AseptiQuik S. It supports tubes of 1/8, 1/4, 3/8, 1/2, and 3/4 inches, and also accommodates 3/4 inch sanitary connections. Additionally, these can be combined with different diameters.

We have developed a product with a smaller diameter tube compared to conventional aseptic connection fittings. This product allows for the aseptic transfer of liquids, even in small quantities. It can be used for various applications such as cell therapy, antibody production, small-scale protein formulations, and clinical trials. Since this product does not require aseptic connection equipment, it enables aseptic drug transfer in locations without power (outdoors, disaster areas). In hospitals, nurses do not need to learn how to operate the equipment, allowing for aseptic connections without initial investment. Additionally, CPC also sells aseptic disconnect joints. When combined with aseptic disconnect joints, it enables aseptic connection and disconnection, allowing for repeated aseptic transfers. For more detailed information on aseptic attachment and detachment, please contact the CPC Japan office. You can watch a video about Aseptic Quick S at the following site: http://www.youtube.com/watch?v=0MTO-Z58leM&feature=youtu.be

The aseptic quick connector is a fitting (joint) that allows for easy, rapid, and reliable connection of sterile tubes and tubes even in non-sterile environments. By simply "pushing - pulling - twisting," it enables the transport of drugs easily, reducing the risk of incorrect operations. Additionally, it is built to be very sturdy, ensuring a high level of safety without the need for additional equipment. The disposable connector technology allows manufacturers of biopharmaceuticals and regenerative medicine devices to easily achieve the sterile environments they require. You can watch a video about the aseptic quick connector at the following site: http://www.youtube.com/watch?v=0HkGOFzyGDI

Compatible with 3/4 TC Compatible with 1.5 TC Connection and conversion applications with resin tubes for single-use purposes from sanitary fittings according to ASME-BPE standards.

AQL is a high-flow male and female connector from CPC that allows for higher flow rates with equivalent pressure and smaller connectors. The AQL product line includes 3/4 inch and 1 inch hose barb connectors, as well as a 1 1/2 inch sanitary hose connector, with new types added that are suitable for high-temperature, high-pressure autoclave processing. The new products are as follows: • AQL17012HT 3/4 inch hose barb connector • AQL17016HT 1 inch hose barb connector • AQL33024HT 1 1/2 inch sanitary hose connector

The AQG 1-1/2 inch sanitary hose end allows for connection to systems using a 1-1/2 inch sanitary hose flange. The latest connectors are resistant to gamma radiation. Below are the latest type and the existing high-temperature high-pressure steam type: AQG33024 1/2 inch sanitary hose connector AQG33024HT 1 1/2 inch sanitary hose connector AseptiQuik G is not compatible with AseptiQuik S. It accommodates tubes of 1/8, 1/4, 3/8, 1/2, and 3/4 inches, and also supports 3/4 inch sanitary connections. Additionally, they can be combined with different diameters on either side.

The Aseptic Quick S Connector comes in small sizes for 1/8 inch, 1/4 inch, and 3/8 inch hose barb, as well as 1/4 inch and 3/4 inch sanitary hose connectors. It is suitable for low flow applications and allows for quick and easy sterile connections even in non-sterile environments. The latest connectors are as follows: AQS33004 1/4 inch sanitary hose connector QS33004HT 1/4 inch sanitary hose connector You can watch a video about the Aseptic Quick S at the following site: http://www.youtube.com/watch?v=0MTO-Z58leM&feature=youtu.be

The "MicroCNX Series" is an aseptic connector designed to connect tubes in a smaller, faster, easier, low-risk, and efficient manner. It allows for easy connection through an intuitive three-step process of "pinch, click, and pull." This reduces the likelihood of operator errors. Since tube welding is not required, it contributes to labor and cost savings. Additionally, the "genderless design," which does not distinguish between male and female, allows both sides to be managed with a common part number, simplifying the specifications of single-use systems. 【Features】 ■ Contributes to improved reliability and safety by reducing operational errors ■ Assembly can be confirmed by sound without the need for additional hardware ■ Available in diameters of 1/16 inch, 3/32 inch, and 1/8 inch ■ Suitable for the transfer of biological media in bioprocessing, cell therapy, and gene therapy applications ■ Eliminates the need to purchase tube welding equipment, reducing labor for adjustments, inspections, and maintenance *For more details, please refer to the PDF document or feel free to contact us.

With a nominal 1 1/2” flow path, it enables rapid and easy aseptic connections in high-volume, high-flow production environments and process enhancement environments. The genderless design simplifies system integration and minimizes operator errors. The robust structure of the connector provides reliable performance without the need for clamps or fixtures. Compatible flow solutions of 1”, 1 ¼”, and 1 ½”.

Using the AseptiQuik G DC connector, pharmaceutical manufacturers can perform rapid and easy aseptic connections, disconnections, and separations even in non-sterile environments. The intuitive "Flip-Click-Pull" design of the AseptiQuik G DC connector allows users to easily transfer fluids while minimizing the risk of operator error. Once the transfer is complete, a simple two-step disconnection feature protects against external contamination of the flow path, maintaining the sterility of the fluid. The robust design of the connector and the automatic shut-off valve provide reliable performance without the need for clamps, fixtures, or tube welders/sealers.

The MicroCNX connector product line is specifically designed to meet the stringent conditions of biological media transfer in bioprocessing, cell therapy, and gene therapy applications. This connector offers various sizes of hose barbs, as well as lure connection options for making sterile closed connections to existing lure fittings. Additionally, the MicroCNX ULT version is a connector suitable for assemblies used in ultra-low temperature freezing applications and connections using PVC tubing.

The genderless, sterile connector (Aseptic Quick Series) without male or female parts has an MPC male insert molded into it, allowing for easy conversion to a closed-system sterile connection from MPC female ports such as those found in bioreactors and single-use bags.

Single-use applications Polycarbonate material Polysulfone material Silicone seal

Simple operation of just pressing a button during sterile separation in a single-use system. No tube sealers or special tools are required. Various tubes, such as silicone tubes, can be used. Compatible with various tubes, not limited to TPE (thermoplastic elastomer) tubes.

The MicroCNX Nano series sterile connectors are specifically designed for the stringent conditions of biological fluid transfer in bioprocessing, cell therapy, and gene therapy applications. Additionally, this thin-profile sterile connector is designed to withstand ultra-low temperatures down to -190°C (for cryogenic freezing applications) and is also designed to fit within freezing cassettes. The MicroCNX Nano series sterile connectors feature 1/8 inch and 1/16 inch hose barb connection shapes, allowing for connections with various material tubes such as silicone, TPE, and PVC. *MicroCNX is a registered trademark of Colder Products Company. *For more details, please download the catalog or feel free to contact us.

It has been demonstrated that a single removal after sterilization can be performed aseptically. Validation data is also available for download from the CPC Colder Products website. There is also a sister product, the Steam-Thru (aseptic connection fitting for stainless steel piping).

Aseptic Quick Genderless Single-Use Sterile Connector PPSU Material Series PPSU (Polyphenylsulfone) material compatible with a wide range of pH 2 to pH 12 drugs BPA Free Does not contain Bisphenol A Chemical resistance performance