シーズ List of Products and Services

The "CZX/CZH" is a chemical dosing pump that can widely adapt to various situations. It is designed for use in factory wastewater, water supply and drainage, sewage treatment, the leisure industry, chemical, dyeing, and paper manufacturing plants, as well as food and pharmaceutical factories, and other water treatment and manufacturing processes. This pump emphasizes diversity, safety, and cost-effectiveness, and features a planetary gear drive. The entire pump is covered in plastic, giving it a refined style. Additionally, it is resistant to rust, maintaining its aesthetic appeal over a long period. It is well-suited for outdoor use or in environments with poor air quality, such as those filled with gas. 【Features】 - The planetary gear two-stage reduction significantly enhances the motor's capabilities. - The interior uses aluminum material, achieving lightweight design. - The flow adjustment dial is large, allowing for smooth setting adjustments. It also features stepless adjustment, enabling flow control from 0 to 100% during operation. *For more details, please refer to the PDF document or feel free to contact us.*

The "C-ZONE CZD" is a new type of quantitative pump that offers high performance at a low price. We provide a wide variety of wetted materials to accommodate various chemicals. Despite being a compact type using 25W and 40W, it achieves accurate discharge performance. 【Features】 ■ Diaphragm type ■ A wide range of motors with various power supplies and standards ■ The motor (self-cooling indoor type) uses the reliable Sumitomo ASTERO reduction gear ■ Compact design ■ Streamlined number of parts with consideration for the environment *For more details, please refer to the PDF document or feel free to contact us.

This is a tube pump suitable for high viscosity and slurry solutions. 【Features】 ○ Powerful suction force of -101KPa (760mmHg) Self-priming lift up to 9.5m of water column ○ Overwhelming pumping capacity of up to 25kg/cm² (Type: CZTG) volumetric pump ○ Capable of both forward and reverse rotation After pumping in the forward direction, it can reverse to recover residual liquid in the tube ○ Can self-prime and pump even fluids with high viscosity (50,000 mPa·s), high concentration, and containing solids or fibers ○ Solids can be up to 1/4 of the tube diameter ○ Can self-prime and pump almost any fluid as long as it is flowable ○ No issues with dry running; can operate with air and water ○ The tube is made of NR/NBR, which excels in acid resistance and abrasion resistance (NBR is particularly oil-resistant) ○ The fluid does not come into contact with anything other than the tube There is no concern about liquid leakage due to the non-seal, valve-less structure ○ Easy cleaning of the pump tube The piping can be quickly cleaned with a sponge *For more details, please contact us or download the PDF.

The "CXPC Series" is a chemical hand pump designed for the transfer of various chemicals in factories and wastewater treatment plants. It is highly resistant to chemicals, made from a variety of materials including PP, Teflon, and SUS, and can accommodate a wide range from small quantities to large volumes. Additionally, all models comply with PSE (Electrical Appliance and Material Safety Law). It can be used for various applications such as transferring pool water treatment chemicals, changing chemicals used in laboratories, and transferring chemicals for semiconductor manufacturing. 【Features】 <100V, Air Motor, Rechargeable: CXPC-21M Type, CXSC-316M Type> ■ Compact, lightweight, and easy to operate ■ Excellent corrosion resistance design (2 types) - CXPC-21M suitable for acidic and alkaline solutions - CXSC-316M made of SUS316 for solvents ■ Pipe diameter fits oil cans and poly cans (diameter Φ31) ■ Expanded applications due to the use of a sealed motor ■ Increased output for more efficient operation ■ Option available for models with a valve *For more details, please refer to the PDF document or feel free to contact us.

We have developed a tube pump that is optimal for high-viscosity slurry solutions. ■ Powerful suction force of -101KPa (760mmHg) Self-priming lift is possible up to a water column of 9.5m ■ Overwhelming pumping capacity of up to 25kg/cm² (Type: CZTG) volumetric pump ■ The pump can rotate in both forward and reverse After pumping in the forward direction, it is possible to recover residual liquid in the tube by reversing ■ Capable of self-priming and pumping even for high-viscosity (50,000 mPa·s), high-concentration fluids containing solids and fibers Solids can be up to 1/4 of the tube diameter ■ If the fluid has flowability, most fluids can be self-primed and pumped ■ No issues with dry running; air-water operation is possible ■ The tube is made of NR/NBR, which excels in acid resistance and abrasion resistance (NBR is particularly excellent in oil resistance) ■ The flowing liquid does not come into contact with anything other than the tube (non-seal, valve-less structure), so there is no worry about liquid leakage ■ Easy cleaning of the pump tube The piping can be quickly cleaned with a sponge.

The "YD-GV Series" is a valve-less self-priming magnetic pump that retains sufficient self-priming water for reoperation even without a check valve. Thanks to the heat-resistant materials used in the sliding parts and the heat dissipation structure that lowers temperature, it features a unique heat-resistant design that is less prone to thermal deformation. It excels in situations where self-priming is required for chemical applications. 【Features】 ■ Retains sufficient self-priming water for reoperation even without a check valve ■ Strong against dry running with a heat dissipation and thermal insulation bearing structure ■ Valve-less design ■ Heat dissipation and thermal insulation bearing structure - International Patent. *For more details, please refer to the PDF document or feel free to contact us.

The "EHN-YN / EHN-YT series" is an electromagnetic pulse pump handled by Seiza. 【Features】 Selection of manufacturers based on specifications - Liquid used (determines the material of the wetted parts) and operating temperature - Capacity (required flow rate and pressure) - Power specifications (100V/200V, 50Hz/60Hz) - Applications and usage methods (control methods) Depending on the application, additional accessories may be required (back pressure valve, safety valve, air chamber) ■ Main manufacturers handled Nikkiso Eiko, Tokemi, Kyoritsu Kiko, Meito Chemical Engineering *For other functions and details, please contact us.

The magnet pump "MD Series (made of PP)" is a magnet pump manufactured by Iwaki, handled by Sees Corporation. 【Features】 Select the manufacturer based on your desired specifications: - Liquid to be used (determines the material of the wetted parts) and operating temperature - Capacity (required flow rate and pressure) - Power specifications (100V/200V, 50Hz/60Hz) - Application and usage method (control method, outdoor or indoor) - Installation conditions (push operation or self-priming operation) ■ Major manufacturers handled Nikkiso Eiko, Tokemi, Kyoritsu Kiko, Meito Chemical Engineering *For other functions and details, please contact us.

The "Chemipon NF Series" is an electromagnetic metering pump equipped with four standard functions: pulse division mode, pulse multiplication mode, simple timer function, and level switch. With a digital display, it is easy to read and fine-tune. Additionally, it has a free power supply, allowing for voltage selection without restrictions, making selection straightforward. The protective structure is equivalent to IEC standard IP65, making it resistant to dust and water jets. 【Features】 ■ Four standard functions ■ Digital display ■ Free power supply (AC100–240V ±10%) ■ Wide flow range, easy selection ■ Protective structure equivalent to IEC standard IP65 *For more details, please refer to the PDF document or feel free to contact us.

At Shizu Corporation, we are constantly challenging ourselves with new endeavors, centered around three pillars: sales, technology, and maintenance. As the environment surrounding society changes and customer needs diversify, we conduct research in a rapidly changing market. We transform only the highly sensitive information demanded by the times into concrete and strategic plans, and continue to provide products backed by solid technical expertise. 【Business Activities】 ■ Inorganic wastewater treatment equipment ■ Organic wastewater treatment equipment ■ Dehydration and drying equipment ■ pH treatment equipment ■ Automatic chlorine sterilization equipment ■ Exhaust gas treatment equipment ■ Deodorization equipment ■ Deodorant spraying equipment ■ Equipment maintenance ■ Sales of various chemical devices ■ Other labor-saving devices *For more details, please refer to the PDF materials or feel free to contact us.