中央精機 List of Products and Services

One of the devices that converts a manual microscope into an electric microscope. An inexpensive type that attaches to a torque adjustment ring. It allows for the setting and movement of focus positions [Home], any focus position [I], and focus position [II]. To further improve operability during setting and operation modes, switches are consolidated on the front panel. On the side, there is also a [fine adjustment dial] switch that enables minute movements. 【Features】 ○ The front has a power cover to prevent accidental operation. ○ Compatible with microscopes from various manufacturers. ○ Compatible with imaging software → "Supports MDJ's Meta series software (MetaMorph, etc.)," "Supports Mitani Trading's bioimaging software LuminaVision." For more details, please contact us or download the catalog.

• Stand and other options

One of the devices that converts manual microscopes into electric microscopes. It is easier to install and more affordable than electric focus products from other companies. It allows for the setting and movement of focus positions [Home], any focus position [I], and focus position [II]. To further enhance operability during setting and operation modes, switches are consolidated on the front panel. Additionally, a [fine adjustment dial] switch is included on the side for precise movements. 【Features】 ○ Compatible with microscopes from various manufacturers ○ Supports imaging software → Compatible with "MDJ's Meta series software (such as MetaMorph)" and "Mitsutani Trading's bioimaging software LuminaVision" For more details, please contact us or download the catalog.

• Stand and other options

One of the devices that converts manual microscopes into electric microscopes. It is easier to install and more affordable than electric focus systems from other manufacturers. It allows for the setting and movement of focus positions [Home], any focus position [I], and focus position [II]. To further enhance operability during setting and operation modes, switches are consolidated on the front panel. Additionally, a [fine adjustment dial] switch is included on the side to enable precise movements. 【Features】 ○ The front has a power cover to prevent accidental operation. ○ Compatible with microscopes from various manufacturers. ○ Supports imaging software → Compatible with "MDJ's Meta series software (such as MetaMorph)" and "Mitsui & Co.'s bioimaging software LuminaVision." For more details, please contact us or download the catalog.

• Stand and other options

The protrusions on the top of the XY stage have been eliminated, making it completely flat and even easier to use than conventional automatic stages. The XY stage of the microscope can be moved automatically. With the included controller and operation panel, manual jog movement, step movement that allows for a set amount of movement, and teaching movement that enables sequential movement to specified coordinates are all possible. Movements can be programmed relatively easily using the application that is freely distributed on the website. The amount of movement of the stage can be displayed clearly on the LCD screen with a set display unit, allowing the operator to easily understand it. 【Features】 ○ Compatible with imaging software → Those who have compatible software can use it even more conveniently. ○ Standard compatibility with K-standard holders → Compatible with incubators and thermoplates from various manufacturers. ○ Can be mounted on OLYMPUS inverted microscopes and some upright microscopes (stage-fixed microscopes). For more details, please contact us or download the catalog.

• Stand and other options

While being an open control system, it achieves positioning reproducibility equivalent to that of electric stages with linear scales from other companies. In addition to a joystick that further improves the operability of speed and feed mode switching, it also comes with a button-type keypad that allows for fine movements. 【Features】 ○ Stage movement speed and unit display can be changed as desired ○ Standard compatibility with K standard holders (compatible with incubators and thermo plates from various manufacturers) → "LCI's Chamlide LC, TC series," "Tokai Hit's Stage Top Incubator, Thermo Plate series," etc. ○ Can be mounted on NIKON inverted microscopes ○ Compatible with imaging software → "MDJ's Meta series software (MetaMorph, etc.) compatible," "Mitsui & Co.'s bioimaging software LuminaVision compatible" For more details, please contact us or download the catalog.

• Stand and other options

While being an open control system, it achieves position reproducibility equivalent to that of electric stages with linear scales from other companies. In addition to a joystick that further improves the operability of speed and feed mode switching, it also comes with a button-type keypad that enables fine movements. 【Features】 ○ Stage movement speed and unit display can be changed freely ○ Standard compatibility with K standard holders (compatible with incubators and thermo plates from various manufacturers) → "LCI's Chamlide LC, TC series", "Tokai Hit's Stage Top Incubator, Thermo Plate series", etc. ○ Can be mounted on LEICA inverted microscopes ○ Compatible with imaging software → "MDJ's Meta series software (including MetaMorph, etc.)", "Mitsutani Trading's bioimaging software LuminaVision compatible" For more details, please contact us or download the catalog.

• Stand and other options

While being an open control system, it achieves positioning reproducibility equivalent to that of electric stages with linear scales from other companies. In addition to a joystick that further improves the operability of speed and feed mode switching, it also comes with a button-type keypad that allows for fine movements. 【Features】 ○ Stage movement speed and unit display can be changed as desired ○ Standard compatibility with K standard holders (compatible with incubators and thermo plates from various manufacturers) → "LCI's Chamlide LC, TC series", "Tokai Hit's Stage Top Incubator, Thermo Plate series," etc. ○ Can be mounted on OLYMPUS inverted microscopes ○ Compatible with imaging software → "MDJ's Meta series software (MetaMorph, etc.) compatible", "Mitsui & Co.'s bioimaging software LuminaVision compatible" For more details, please contact us or download the catalog.

• Stand and other options

The ultra-thin VB stage is RoHS compliant. It significantly changes the concept from traditional products, achieving a thickness comparable to that of a smartphone while maintaining high load capacity and low cost. A special manual handle that can be used without a hex wrench is also planned. This product uses magnets. The processing is finished with milling. For more details, please contact us or refer to the catalog.

• Other safety equipment
• others
• Actuator

The high-precision, high-rigidity automatic stage that adopts the independently developed guidance method "HG-VCR method" can be widely used for precise positioning applications such as cameras, sensors, and workpieces.

• Other FA equipment

This is a precision positioning stage that achieves both rigidity and lightweight design by adopting the independently developed guidance method "HG-VCR" using aluminum alloy as the main material. It can be widely used for precision positioning applications such as cameras, sensors, and workpieces.

• Other FA equipment
• Other machine elements

1. Achieves high speed and high reproducibility through the line sensor method. 2. Standard compatibility with Nikon's CF/IC EPI series objective lenses. 3. Compatible with surfaces that have depressions or holes.

• Optical microscope

Assembled with corner stainless steel. The door side is fully open, making it easy to put in and take out items. A transparent acrylic panel or vacuum glass maintains the constant temperature and humidity in optimal condition. Standard equipped with an exhaust duct mounting hole to allow for the installation of a constant temperature and humidity air supply unit.

• Other environmental equipment

1. Thin, lightweight XY stage for mounting microscopes with large travel range. 2. Designed for microscope applications, it is thin and lightweight without compromising on accuracy. 3. Compatible with Olympus and Nikon microscopes (an adapter is used if it cannot be mounted as standard). 4. High precision achieved through the use of ball screws and cross roller guides. 5. Equipped with a home position sensor as standard. 6. By removing the standard aluminum plate and using the optional glass plate, it can also accommodate transmitted illumination. 7. A wide range of optional items such as wafer holders, glass plates, and aluminum plates are available. Custom products can also be made to customer specifications.

• Inspection fixture

Features: 1. Equipped with a unit display function (simple display of mm, μm, degrees, and degrees-minutes-seconds using symbols). 2. Equipped with a variety of origin return functions. 3. Equipped with program operation and teaching functions. 4. Standard attachment of a Windows-compatible downloadable program editor. 5. Equipped with a variety of input and output ports. 6. Standard RS-232C interface for connection to a PC. 7. Standard emergency stop input terminal. 8. Easy execution of settings tailored to the connected stage. 9. Compatible with Z stage equipped with an electromagnetic brake. 10. Products available with ultra-low vibration micro-stepping drivers. 11. Smooth acceleration and deceleration possible with S-curve drive function.

• Other FA equipment