構造システム・グループ List of Products and Services

The DRA Viewer is an easy-to-use DRA-CAD two-dimensional drawing viewer app that anyone can utilize. With your iPhone or iPad, you can access DRA-CAD drawings anytime and anywhere. By using this app, you can take the drawing assets and ideas created with DRA-CAD to various locations and share them with many stakeholders.

• 2D CAD Construction
• Other CAD
• Other CAD related software

BUS-6 is a program that comprehensively supports structural calculations for RC/SRC/steel buildings in accordance with the revised Building Standards Act. With its ability to faithfully model the shape and arrangement of structural frameworks and perform three-dimensional analysis, it resolves concerns related to modeling. It allows for the speedy preparation of submission documents such as structural calculation reports and design drawings. The comprehensive catalog (digest version) from Structural System Co., Ltd. can be viewed by downloading it from "Download Catalog."

• Other CAD related software

BUS - The foundation structure is a program that performs calculations related to the foundations, piles, and ground of RC/SRC/steel buildings, and examines the safety of the building. It handles pile foundations as well as independent footing foundations, slab foundations, and strip foundations. The comprehensive catalog (digest version) of Structural System Co., Ltd. can be viewed by selecting "Download Catalog."

• Other CAD related software

WALL-1 is a comprehensive structural calculation program for wall-type reinforced concrete buildings. In addition to outputting structural calculation reports, it can also output diagrams and data necessary for structural calculation summary reports and compliance assessments. The comprehensive catalog (digest version) of Structural System Co., Ltd. can be viewed by selecting "Download Catalog."

• Other CAD related software

HOUSE-ST1 is a program that performs structural calculations for wooden frame construction. In addition to three-story buildings, it can also conduct structural calculations for two-story and lower buildings, as well as mixed-structure wooden components. The results of the calculations are output as a structural calculation summary and structural calculation report, along with plans such as floor layouts. The comprehensive catalog (digest version) from Structural System Co., Ltd. can be viewed by selecting "Download Catalog."

• Other CAD related software

SNAP performs member-level elastic-plastic dynamic response analysis, stress analysis, and incremental analysis for structures of arbitrary shapes.

• Other CAD related software

FAP-3 can perform elastic stress analysis of arbitrarily shaped structures, including out-of-plane stiffness in addition to in-plane stiffness, using wire materials as well as planar plate elements as structural components. Diagrams and calculation results can be output as PDFs. The elastic stress analysis of arbitrarily shaped three-dimensional frames can be viewed by downloading the catalog.

• Other CAD related software

DOC-RC/SRC is a primary and secondary seismic diagnosis program for existing RC/SRC buildings that complies with seismic diagnosis standards, and it has received evaluation (P evaluation 11-Rev1-RC) from the Japan Architectural Disaster Prevention Association and the Architectural Research Promotion Association. It can also be used for reinforcement design when conducting seismic retrofitting. The primary and secondary seismic diagnosis for RC/SRC buildings, DOC-RC/SRC, can be viewed by downloading the catalog.

• Other CAD related software

DOC-S conducts seismic assessments and reinforcement calculations for a wide range of buildings, including steel structures, indoor gymnasiums, and factories. The seismic assessment and reinforcement calculations for steel structures can be viewed by downloading the catalog from "Download Catalog."

• Other CAD related software

This is a structural calculation program for wall-type reinforced concrete structures that allows you to input the building shape as it is. The structural system HOUSE-WL can be viewed by downloading the catalog.

• Other CAD related software

HOUSE-DOC is software that conducts seismic diagnosis of wooden structures. It performs calculations based on "Seismic Diagnosis and Reinforcement Methods for Wooden Houses" (published by the Japan Architectural Disaster Prevention Association in July 2004). It evaluates seismic resistance using data required to calculate the necessary strength, such as location, ground conditions, and building shape, as well as data on the specifications and integrity of the foundation, wall specifications and layout, and floor specifications and extent. The structural system HOUSE-DOC can be viewed by downloading the catalog.

• Other CAD related software

Covers everything from seismic diagnosis calculations to reinforcement design. The DOC-3 seismic diagnosis performs third-level seismic assessments of existing RC/SRC buildings in accordance with seismic diagnosis standards, as well as calculations that comply with various seismic diagnosis criteria. For steel structures, assessments are conducted based on the comprehensive seismic diagnosis standards for government facilities. It is also possible to input seismic reinforcement components and perform diagnostic calculations after reinforcement. The structural system DOC-3 seismic diagnosis can be viewed by downloading the catalog.

• Other CAD related software

SAVE-Architecture is an energy-saving calculation software for buildings (non-residential) that complies with the 2016 Energy Conservation Standards. It calculates the envelope performance and primary energy consumption of buildings (non-residential) and supports the preparation of necessary documents for notifications. It is also compatible with BELS (Building Energy Efficiency Labeling System).

• Other CAD related software

SAVE-Housing is an energy-saving calculation software for residential buildings that complies with the 2016 Energy Conservation Standards. It features a variety of calculation and output functions, including calculations of the exterior performance of houses and units (UA value, ηA value), primary energy consumption, classification of primary energy consumption, insulation performance ratings, and heating and cooling costs. It provides comprehensive support for energy-saving design and reporting tasks for apartments and houses. ● For more features and details, please download the catalog.

• Other CAD related software

Since the Great Hanshin-Awaji Earthquake, the need for restoration, disaster prevention, and seismic performance evaluation and reinforcement of traditional wooden buildings has been increasing in order to preserve them for future generations. However, the models of traditional wooden structures are complex. To verify the deformation characteristics and stress states of members during assumed earthquakes, analytical tools capable of handling complex modeling are required. The Architectural Research Association has introduced "SNAP" and is conducting seismic performance evaluations and reinforcement projects for many traditional wooden buildings. The report on the elastic-plastic analysis of arbitrary-shaped three-dimensional frames using SNAP can be viewed by downloading the catalog.

• Other CAD related software

We would like to introduce a case study of the primary and secondary seismic diagnosis program for RC/SRC buildings, "DOC-RC/SRC." At Kanebako Structural Design Office, we are not only satisfying the required seismic performance but also pursuing the potential for seismic retrofitting that adds even more value to the buildings through reinforcement design. In recent years, the number of seismic diagnosis and retrofitting projects has increased, reaching 10% of our overall business, and we were considering purchasing a seismic retrofitting and diagnosis program. The deciding factor for adopting DOC-RC/SRC was its high operability. Since it inherits the input from the structural system's integrated structural calculation program "BUS-5," it is user-friendly and allows for CAD-like input. The output results are presented in full color, neatly organized into chapters and pages, making them easy to read and verify. Additionally, the ability to directly input indicators of ductility and strength according to the situation added significant flexibility, which was a major factor in our decision to adopt it. For more details, please contact us or refer to the catalog.

• Other CAD related software

We would like to introduce a case study of the structural calculation software "WALL-1" for wall-type reinforced concrete buildings. At the office of Shuji Tada Structural Design, we handle numerous structural designs for wall-type houses of 100m² and 200m² scale, as well as compact multi-family residences with a total floor area of around 200 to 1000m². In residential and small multi-family buildings, most of the reinforced concrete structures are wall-type. As we began to handle nearly ten wall-type projects annually, and due to the stricter regulations on confirmation applications following the seismic fraud incident, we considered the introduction of wall-type integrated structural calculation software. "I was recommended 'WALL-1' by an acquaintance as being user-friendly, and after trying it out, I found it very easy to use because I could smoothly input openings and create a rough model in a short time to get results. It has a good reputation among cooperating offices, so we decided to implement it. We started using it around 2009, and now we use WALL-1 for almost all our projects. WALL-1 has a proven track record, so it is favorable for confirmation applications." For more details, please contact us or refer to the catalog.

• Other CAD related software

We would like to introduce a case study of the vibration analysis tool "SNAP." Yamashita Design Corporation is one of Japan's leading comprehensive design firms, known for handling the Kasumigaseki Building, the first super high-rise building in Japan. Recently, proposals emphasizing structural planning have become essential for securing contracts for the design of government and private facilities, with seismic isolation design becoming standard in hospital architecture and vibration control structures in office buildings. The need for response analysis using three-dimensional models has been increasing to analyze complex structures. Due to the impact of legal revisions and the need to adapt to advancements in analysis technology, it became challenging to maintain their in-house programs, leading to the decision to adopt commercial software, with "SNAP" being one of the options. Since there are currently few case studies using SNAP, when creating models, we verify input data and calculation results while working, and we have reached out to support with questions whenever uncertainties arise. The support staff are well-versed in the program's details, providing prompt and thorough responses. For more details, please contact us or refer to the catalog.

• Other CAD related software
• Other analyses

The engineers at Nisso Ken Co., Ltd. have been involved in the design of many large projects such as government offices, commercial buildings, and communication facilities. Most of their drawings are created using DRA-CAD. "We have been using DRA-CAD since the Structural Systems Group developed it, and its user-friendliness and suitability for expressing our work have led us to use it for the past 20 years. One of the main reasons DRA-CAD has become so widespread is its 'simple fundamental concept.' There are also opinions that it is pleasant to use because it feels like drawing by hand." "Nowadays, CAD has become more common, and there are increasing cases where it can be shared across different software. In the future, we hope to see how it can be compatible with DWG, Jw_Cad, and others." For more details, please contact us or refer to our catalog.

• Other CAD

Chiyoda Techno Ace Co., Ltd. specializes in the design and construction of buildings and building facilities, including clean rooms for pharmaceutical factories and general work equipment factories, and has gained significant support in this field due to its high level of specialized technical expertise. In project management, including the Equipment and Electrical Headquarters, DRA-CAD is used as the standard CAD software. "Originally, we were using CAD software from another company, but the time-consuming process of redrawing drawings was a problem, and we were struggling to find software with good operability. That’s when DRA-CAD provided a solution. In terms of operation, its fast response and customizable icon menus make it very user-friendly, which is a major attraction of DRA-CAD. For engineers involved in design, DRA-CAD allows for scaling the drawing frame in a way that feels close to hand-drawn drafting, making it easily accepted by engineers and a significant reason for its company-wide adoption." "DRA-CAD is reportedly working on enhancing its features for the future, so we expect it to become even more convenient and efficient software." For more details, please contact us or refer to the catalog.

• Other CAD

Kataoka Design Co., Ltd. is an architectural design office established in 1982. Their design projects primarily focus on single-family homes, but they also handle multi-family residences, stores, factories, offices, and hot spring inns, covering a wide area throughout the Kanto region. "When I became independent, I strongly felt that the future of design was in the CAD era, so I introduced computers and CAD software. After consulting with industry professionals and visiting various places, I decided to adopt DRA-CAD, which was already being used by major design firms and general contractors, had a large user base, and was highly regarded for its ease of use. Since it was my first experience with computers, I took foundational courses to learn, but DRA-CAD's operation felt very close to hand-drawing, which was a great help. Purchasing a computer and starting CAD at the age of 45, and still actively drawing plans even after turning 60, makes me feel that my way of thinking and the choice of DRA-CAD were indeed the right decisions." For more details, please contact us or refer to our catalog.

• Other CAD

The staff of the Architectural Design Department at Daiho Construction Co., Ltd. handles a wide range of architectural design, primarily focusing on condominiums, as well as offices and factories. The design drawings created by the 20 engineers are all designed using DRA-CAD. "We introduced it around 1991-1992, when CAD was not yet widespread. At that time, I believe there were very few CAD software options available, but we decided to adopt DRA-CAD from Structural Systems, a leading manufacturer of architectural design drafting software, because we had confidence in it, and we have continued to use it to this day. There have been suggestions to switch to other companies' software several times, but each time, we concluded that we should maintain productivity with the user-friendly DRA-CAD, and we still use it now. Particularly, since DRA-CAD is a domestically produced CAD, I think it matches the drawing sensibilities of Japanese designers." "The drawings produced in-house range from general drawings to detailed drawings, all created using DRA-CAD. While it is mainly used for drafting tasks, I believe it is a CAD with very high expressive power. It is also very useful for creating planning drawings and is greatly utilized in planning and presentations." For more details, please contact us or refer to the catalog.

• Other CAD

Kamikawa Structural Design Office Co., Ltd. is a structural design firm with one of the leading track records in the field of water supply and sewage system structural design in Japan. Since its establishment, it has efficiently carried out numerous structural designs utilizing BUS and DRA-CAD. "When the office was first established, we conducted structural calculations using BUS-1 and created drawings by hand. At that time, during a design project for a sewage treatment plant in Koto Ward, Tokyo, the design firm we were working with submitted drawings using DRA-CAD. Upon seeing those drawings, the convenience of making corrections stood out, leading us to the conclusion that we had to adopt DRA-CAD." "I appreciate that DRA-CAD is simple to operate, easy to remember, and easy to teach. Even when new staff join, with some guidance, they can start working with DRA-CAD. After that, they can use it independently while referring to the manual, which is very good. Above all, it is the easiest to handle compared to other products." For more details, please contact us or refer to our catalog.

• Other CAD

The Tokachi-Oki Earthquake of 1968 caused significant damage to school buildings made of reinforced concrete, which were referred to as "main construction" at the time, and had a profound impact on architectural structural engineering. This is an introduction to a digital archive summarizing the damage investigation and research into the causes. This research revealed the risk of shear failure in short reinforced concrete columns, and its findings were incorporated into building codes and calculation standards of the Architectural Institute of Japan, greatly contributing to seismic structural design methods. For other features and details, please download the catalog.

• others

The Arte DESIGN series is a DVD collection that introduces industrial products representative of the 20th century. This series is not just video content for product introduction; it allows you to enjoy the most innovative industrial designs of that era along with the cultural and social backgrounds of the time. The footage restructured from Arte's fresh perspective makes it accessible for anyone to feel close to design. The DESIGN series teaches us the richness of living with design. ● For other features and details, please download the catalog.

• others