エムアンドエム List of Products and Services

Lubrication, heat resistance, water resistance, rust prevention. All the performance required on-site, in one product. M-MPT is a multipurpose grease that combines special synthetic oil with ultra-fine particle PTFE. Its versatility allows it to accommodate all types of equipment, regardless of the usage environment, materials, or applications. It is NSF-H1 certified and can be used in food processing machinery. Additionally, it has low separation and degradation, which helps reduce the frequency of replacement and replenishment, contributing to overall cost reduction. This high-performance grease meets all needs for equipment maintenance, process improvement, and safety management.

• Lubricants
• Plastic bearings
• Lubricants and additives

MK-HPT is a high-temperature fluorine grease based on a fully synthetic oil, blended with PTFE micro-powder. It can handle a wide temperature range from -40°C to +240°C, and due to its stable structure, it experiences minimal evaporation or hardening even in high-temperature environments. With the addition of antioxidants and anti-friction agents, it maintains durability and lubrication performance over an extended period. It is ideal for lubricating mold components and precision machinery.

• Engineering Plastics
• bearing
• Lubricants and additives

M-PPT is a PTFE-based fluorine grease designed to withstand harsh conditions such as high temperature, high vacuum, and high corrosion. It has high resistance to acids, alkalis, and organic solvents, providing stable lubrication for extended periods even in severe chemical environments and clean rooms. It can operate at temperatures ranging from -40°C to +250°C (withstanding up to 280°C momentarily) and is highly resistant to evaporation loss and oxidative degradation, making it ideal for equipment and devices that require high reliability. Additionally, it has good compatibility with metals, resins, and rubber, and is used for lubrication and wear resistance in high-temperature engineering plastic components such as PEEK, PPS, and PTFE, as well as for sealing and lubrication of O-rings and gaskets. This grease serves as the "last line of defense" to thoroughly mitigate lubrication issues, from fine mechanisms to heavy machinery components.

• Engineering Plastics
• Plastic bearings
• Lubricants

MK-DEM is a grease for molds developed with a focus on "versatility that can be widely used for all types of molds" and "appropriate cost." Rather than being an overly high-performance, over-spec product, it balances sufficient performance and cost reduction by optimizing for usage temperatures around 180°C and typical molding conditions. It provides stable lubrication and adhesion in areas where you want to prevent seizure and wear, such as split parts, pin parts, and slide parts. "Because it's something you use every day, it needs to have just the right performance at just the right price" — this is a practical grease that responds to the voices from the field.

• Plastic Mould
• Other molds
• Lubricants

MK-OPA is a specialized grease designed to enhance the lubrication and sealing properties of O-rings and gaskets. It has excellent compatibility with rubber materials and maintains adhesion for extended periods. It is also compatible with resins and elastomers, making it suitable for a wide range of sealing materials. It is easy to extrude and can be applied using either a grease gun or by hand. In molding environments and maintenance applications, it contributes to extending the lifespan of components and reducing troubles.

• Plastic Mould
• Press Dies
• Lubricants

"MK-FOD," a high-performance grease certified NSF-H1, is optimal for the molding process of food containers. This special synthetic grease, formulated with PTFE (fluoropolymer), exhibits stable lubrication performance over a wide temperature range of -20°C to 235°C. By applying it to sliding parts of molds and ejector pins, it reduces the risk of wear and seizure, significantly extending maintenance intervals. Its translucent type eliminates concerns about adhesion or discoloration on molded products, making it safe for use in environments where food hygiene is required. It contains no harmful components such as lead or molybdenum, minimizing adverse effects on molds and resin materials. It has been adopted in many settings as the definitive solution for mold maintenance in food packaging and sanitary equipment.

• Plastic Mould
• Mold
• Lubricants

M-HIT is a high-performance fluorine grease for molds that can withstand high-temperature environments up to 280°C. It is urea-based, excelling in heat resistance, wear resistance, and chemical resistance, making it ideal for lubricating moving parts such as slide pins and ejector pins that operate under high temperatures. With minimal evaporation loss and reduced risks of thermal degradation and seizure, it achieves lower maintenance frequency and extended part lifespan. Its excellent compatibility with metals, plastics, and rubber allows for safe use across a wide range of mold components. In environments where high temperatures and high loads are increasing, this product achieves both stable lubrication and cost performance. ✅ Features - High-temperature compatibility (up to 280°C): Maintains stable lubrication performance even at high temperatures - Urea-based: Ensures smooth movement and prevents seizure and wear - Excellent wear resistance and load capacity: Ideal for harsh sliding parts like slide pins and ejector pins - Compatibility with a wide range of materials: Good compatibility with metals, rubber, and resins (such as nylon and PTFE) - Focus on cost performance: High performance at an easily adoptable price point, reducing the burden on the workplace

• Plastic Mould
• Mold
• Lubricants

Copa Mesh M-COP is a cleaning cloth designed to efficiently remove resin and carbides that have adhered to the screws and cylinders of plastic processing machines. The copper gauze ensures thorough cleaning without damaging the parts. Features of Copa Gauze M-COP: - A cleaning cloth made of copper gauze that does not damage parts - Fits into the grooves of screws and cylinders to efficiently remove resin and carbides - Available in two types: soft and hard - Reduces work time and improves maintenance efficiency Usage Instructions: 1. Remove the screw from the molding machine and securely fix it to the workbench. 2. Lightly brush the surface of the screw to remove any adhered materials. 3. Wrap the Copa Gauze around the area to be cleaned and rub it while alternately pulling both ends. 4. If necessary, using screw maintenance wax can enhance the effectiveness. Target Use: - Cleaning screws and cylinders of plastic processing machines - Also suitable for cleaning the holes of dies.

• Plastic Mould
• Resin mold

M-HMT is a multipurpose high-performance grease for machinery that exhibits stable lubrication performance even in high-temperature, high-load, and high-humidity environments. With excellent heat resistance, water resistance, and strong adhesion, this grease is ideal for areas where "dripping" or "splashing" of grease is a concern, such as bearings, moving parts, and sliding surfaces. It stays firmly in place where lubrication is needed and maintains its lubricating performance over a long period. By using lithium-based thickeners, it helps prevent oil film breakage and seizing, reducing maintenance frequency and contributing to the extension of machine life. It is used in a wide range of fields, including molds, construction machinery, and industrial equipment, and is highly regarded as a "universal grease." ✅ Features - **High-temperature compatibility (operating temperature range: -20°C to 200°C)** to prevent seizing and oil film breakage - Stable lubrication even in high-speed rotation or vibration areas due to strong adhesion and anti-splash properties - Excellent water resistance, making it usable in humid or water-exposed environments - High pressure and load resistance, maintaining lubrication performance even in high-load conditions - Utilizes the versatility of lithium-based grease to accommodate various materials and equipment - Economical and easy to handle, making it ideal as a staple for mold and machinery maintenance.

• Lubricants
• Chains and sprockets
• Metal bearings

DYKEM layout fluid is a layout paint that forms a vivid coating on metal surfaces, allowing layout lines and markings to be seen with high precision. It is ideal for marking and scribing in cutting, processing, and assembly work. It excels in oil resistance and quick drying, achieving both reduced work time and accurate marking. - DYKEM Scribing Ink Brush Type (225g) #80496 STEEL RED Brush-In-Cap 8oz. - DYKEM Scribing Ink Brush Type (225g) #80400 STEEL BLUE Brush-In-Cap 8oz. - DYKEM High Spot Blue Pen Type (15g) #83307 M-DBP

• Other painting machines

M-MLPT is a multipurpose fluorine grease specifically designed for molds, combining high heat resistance, high chemical resistance, and non-contaminating properties. Its high-performance design, incorporating PTFE (fluoropolymer), excels in sliding performance and lubrication longevity, making it suitable for a wide range of areas such as sliding parts, pins, cores, and slides in resin molding and die-casting molds. It prevents seizing and wear even in high-temperature environments above 200°C, and the risk of resin contamination is extremely low, making it ideal for molds of products where appearance quality is emphasized. ✅ Product Features (M-MLPT) - High heat resistance: Maintains stable lubrication performance even in high-temperature environments of 280°C - High lubricity: Extremely high sliding properties due to the incorporation of PTFE (fluoropolymer) - Non-contaminating: Minimal grease bleeding and discoloration, does not dirty molded products - Chemical resistance: Excellent resistance to solvents, gases, and resin additives - Versatile application: Ideal for sliding parts, slide sections, pins, guides, hinges, etc. - Prevents seizing and wear: Forms a lubricating film even under high loads, extending lifespan - Compatible with various mold materials: Usable with SUS, SKD, aluminum, hard chrome, etc. Widely adopted as a standard grease on-site: Numerous examples of transitioning from initial testing to long-term use.

• Lubricants
• Plastic Mould
• Mold

Ideal for replacing Parker high-pressure fittings. Achieve significant cost reductions while maintaining quality. The MMG high-pressure quick coupling series is a high-performance fitting compatible with Parker's high-pressure quick couplings (such as stainless steel snap-tight). It is widely adopted by many companies as an alternative that excels in cost performance, offering excellent pressure resistance, durability, and operability while keeping prices low for equivalent performance. It is a strong option for sites facing challenges with the running costs and procurement costs of Parker fittings, allowing for cost reductions without compromising quality. - BH1-60H (1/8) - BH1-61H (1/8) - BH2-60H (1/4) - BH2-61H (1/4) - BH3-60H (3/8) - BH3-61H (3/8) - BH4-60H (1/2) - BH4-61H (1/2) - BH6-60H (3/4) - BH6-61H (3/4) - BH8-60H (1) - BH8-61H (1)

• Hydraulic Equipment

The MMG200 series is a compatible quick connector for mold temperature control that conforms to DME standards. It is compatible with domestic and international mold temperature control lines, maintaining compatibility with traditional DME types while improving durability, sealing, and operability. It accommodates materials such as brass and can be widely used in mold temperature control water and oil lines. It is widely adopted in fields such as resin molding and die casting, making it ideal for replacement of "DME manufactured connectors." It offers a wide range of screw sizes (PT1/8, 1/4, 3/8) and supports both individual couplers and nipples as well as set sales. While keeping costs down, it has received high praise from many users as a reliable temperature control connector. Product Features (MMG200 Series) - Compatible with DME standards: Conforms to widely used DME types both domestically and internationally - High durability and high sealing structure: Strong against repeated connections and disconnections, preventing leaks and disconnections - One-touch connection: Simple connection and disconnection structure that enhances work efficiency - Wide range of screw sizes: Available in many sizes including PT1/8, 1/4, 3/8 - Compatible with both water and oil: Usable in cooling water and temperature control oil lines for mold temperature control - Many replacement achievements as a compatible product: Ideal for replacement from DME

• Plastic Mould

At M&M, we offer high-performance greases compatible with various types of mold forming machines. Depending on the application and cost, you can choose the optimal product from **fluorine-based greases (high heat resistance and long lifespan) and lithium-based greases (high-temperature operation and cost-focused)**. These greases are ideal for lubrication of movable and sliding parts, as well as heating and cooling sections, supporting stable operation of production lines. In particular, fluorine-based greases demonstrate excellent lubrication and oxidation stability even in processes where stopping movement is difficult, or in high-temperature and high-load environments. On the other hand, lithium-based greases achieve high cost performance in settings where regular maintenance is assumed. We have a proven track record in diverse industries such as manufacturing, resin molding, die casting, and food containers. With a reliable domestic supply system, we deliver stable quality and prompt responses.

• Press Dies
• Plastic Mould
• Lubricants

The CVPL-200 is a shot counter designed to accurately count the number of molding cycles (shots) when installed on injection molding machines or die-casting molds. It is easy to install and operates as a mechanical counter that does not require a power supply, eliminating concerns about electrical issues or malfunctions, ensuring stable operation. With its compact body and highly visible counter display, anyone can easily check the cumulative shot count at a glance. It is utilized for mold lifespan management, maintenance planning, and determining replacement timing, contributing to preventive maintenance and quality control on the shop floor. Additionally, its dust-proof structure and high durability design allow for safe use even in harsh molding environments. It boasts a long lifespan and excellent cost performance, with numerous successful implementations in manufacturing sites both domestically and internationally.

• Plastic Mould

This is a hybrid grease (special grease) equipped with a triple effect. It maintains lubrication even in high-temperature environments of 800°C. A versatile high-performance grease that balances equipment protection and on-site efficiency. Golden Grease is an industrial high-temperature grease that maintains lubrication and release performance even under harsh high-temperature conditions. It prevents equipment seizure and wear in environments exposed to temperature and abrasion, such as molds, heating devices, furnace surroundings, and high-temperature sliding parts, achieving long-term stable operation. It responds to "high-temperature stress" in various industries. It is used in diverse fields such as casting, resin molding, steelmaking, glass, ceramics, and food machinery. ✅ Features - Heat resistance over 800°C* (*varies by product) - Excellent lubrication, wear resistance, and pressure resistance - Prevents seizure in high-temperature sliding parts and sliding contact surfaces - Produces minimal carbon residue, keeping equipment and products clean - Available in user-friendly shapes such as paste ✅ Application Examples (by industry) - Metal processing equipment: heated sliding parts, shafts, pins, extrusion molding parts - Automotive parts manufacturing: high-temperature jigs, transport parts, heating jigs - Glass and ceramics industry: high-temperature furnaces, transport lines, contact guide parts *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants
• Plastic Mould
• Mold

At M&M, we offer a variety of quick couplings for mold temperature control manufactured by PARKER (Parker Hannifin) in the United States. We focus on high-quality fittings used in many molding machines and mold temperature control lines, including the PC series and P200 series, and we provide options for male and female individual parts, sets, and replacement parts. PARKER fittings are characterized by high durability, high sealing performance, and smooth attachment and detachment, demonstrating excellent performance in cooling water and oil lines for molds. It is possible to minimize downtime during replacement. Material selection according to the usage environment, such as stainless steel or brass, is also available. We also handle long-term stock items and immediate delivery, so you can use them with confidence for overseas specifications. We can assist with the sale of genuine products and the procurement of imported goods, so please feel free to consult with us.

• joint