サンギョウサプライ Product Lineup

The "Double Tube Grid Type Magnet" is a magnet filter that adsorbs and removes metal fragments and fine iron powder that may be mixed into food, processed food, and industrial materials. It captures fine iron powder using a high-power magnet with a maximum surface magnetic flux density of 1,200 mT and a diameter of 25 mm. By adopting a grid shape, it allows for the removal of more iron powder compared to a single magnet bar. It is mainly installed within housings or piping. The junction between the magnet bar and the flat bar is fully welded with R-shaped edges suitable for food use. By polishing the heads of the screws that secure the magnet bar, it is possible to achieve a gapless and groove-free design. With a sanitary specification, it is resistant to dirt and easy to clean, ensuring a hygienic finish. Custom sizes can be made to order in 1 mm increments. 【Features】 ■ The diameter of the magnet bar is φ25 mm. The outer diameter of the stainless steel outer tube is φ27 mm, and the inner diameter is φ26 mm. Other dimensions can be changed in 1 mm increments. ■ Uses neodymium or samarium-cobalt rare earth magnets. ■ Recommended operating temperatures are below 80°C (Nd type), below 100°C (Nd type), and below 200°C (SmCo type). ■ The number of magnet bars can also be increased or decreased. *For more details, please refer to the documentation.

The "Grid-Type Magnet Frame" is a magnet filter designed to adsorb and remove metal fragments, fine iron powder, and stainless steel wear powder that may be mixed into food, processed foods, and industrial materials. It captures fine iron powder using a high-power magnet with a diameter of 25mm and a maximum surface magnetic flux density of 1,200mT. Due to its grid design, it can remove more iron powder than a single magnet bar. The frame is expected to reduce the risk of magnet adhesion accidents. It is primarily installed within housings or piping. The junction between the magnet rod and the flat bar is fully welded with a rounded edge suitable for food use, and the screw heads used to secure the magnet rods are polished to ensure no gaps or grooves. It features a sanitary design for easy cleaning and a clean finish. Custom sizes can be made to order in 1mm increments. 【Features】 ■ The diameter of the magnet rod is φ25mm. It can also be produced in φ10, φ16, φ19, φ20, φ22, φ28, and φ32mm. Other diameters can be adjusted in 1mm increments. ■ Uses neodymium or samarium-cobalt rare earth magnets. ■ Recommended operating temperatures are below 80°C (Nd type), below 100°C (Nd type), and below 200°C (SmCo type). ■ The number of magnet rods can be increased or decreased. *For more details, please refer to the documentation.

The "Grid-Type Magnet with Fixed Ends" is a magnet filter that adsorbs and removes metal fragments and fine iron powder mixed in food, processed food, and industrial materials. It captures fine iron powder using a high magnetic force magnet with a diameter of 25mm and a maximum strength of 1,200mT. By adopting a grid shape, it allows for the removal of a larger quantity of metal foreign substances compared to a single magnet bar. It is primarily installed within housings or piping. The junction between the magnet bar and the flat bar is fully welded with a rounded edge suitable for food use, and by polishing the heads of the screws that secure the magnet bar, it is possible to achieve a gapless and groove-free design. With a sanitary specification, it is resistant to dirt and easy to clean, resulting in a hygienic finish. Custom sizes can be made to order in 1mm increments. 【Features】 ■ The diameter of the magnet bar is φ25mm. Production is also possible in φ10, φ16, φ19, φ20, φ22, φ28, and φ32mm. Length can be adjusted in 1mm increments. ■ Uses neodymium or samarium-cobalt rare earth magnets. ■ Recommended operating temperatures are below 80°C (Nd type), below 100°C (Nd type), and below 200°C (SmCo type). ■ The number of magnet bars can be increased or decreased. * For more details, please refer to the documentation.

The high magnetic field round grid magnet from Sangyo Supply is easy to clean. 【Main Features】 ■ Maximum surface magnetic flux density: 1.1 Tesla (11,000 Gauss) or more, welded finish ■ Maximum surface magnetic flux density: 1.2 Tesla (12,000 Gauss) or more, screw solid finish

The high magnetic field square lattice magnet from Sangyo Supply is easy to clean. The dimensions can be referenced from the square lattice standards. 【Main Features】 ■ Easy to clean ■ Maximum surface magnetic flux density: 0.8 Tesla (8,000 Gauss) ■ Dimensions can be referenced from the square lattice standards

The "Grid-Type Magnet for Foreign Object Removal" is a product designed to attract metal foreign objects, such as iron pieces, fine iron powder, and stainless steel wear powder, that may be mixed into food, processed food, and industrial materials. Due to its grid design, it can remove a larger quantity of iron pieces, iron powder, and stainless steel wear powder compared to a standalone magnet bar. The magnet rod is joined to a flat bar using full circumferential welding with rounded edges, and the screw heads for fixing the magnet rod are polished to eliminate gaps and grooves. Depending on the application, you can choose between a fixed type at both ends and a four-sided frame type. Customizations such as the number and diameter of magnet rods are also available. We also offer a "double-tube type" that prioritizes maintenance ease for cleaning. 【Features】 - Overall dimensions can be customized in 1mm increments. - The standard diameter of the magnet rod is φ25mm, with options for φ10, φ16, φ19, φ20, φ22, φ28, and φ32mm. - The number of magnet rods can be increased or decreased. - Uses neodymium or samarium-cobalt rare earth magnets. - Operating temperatures typically below 80°C, below 100°C, and up to a maximum of 250°C. - Food-grade finish with full circumferential welding for no gaps. The flat bar has a polished finish without grooves, making it less prone to dirt accumulation.

We are engaged in the design and manufacturing of resin pellet production equipment, and we wanted to install a magnet with a surface magnetic flux density of over 10,000 gauss in the material input hopper. While searching on the internet, we found your company, and due to your good response, we decided to place an order. We installed a "magnet for rectangular hoppers" in the material input hopper and a "rectangular grid magnet" at the discharge outlet of the finished pellets. As a result, we were able to remove metal foreign objects according to the specifications requested by the client, thus meeting their needs. If you are a customer struggling with the removal of iron powder, iron pieces, or nails mixed in raw materials, please consult Sangyo Supply first. 【Installation Example】 ■ Client: Resin pellet manufacturing equipment company ■ Products Installed - Magnet for rectangular hoppers - Rectangular grid magnet *For more details, please refer to the related links or feel free to contact us.

We have been entrusted with the task of receiving and storing soda ash, and we were requested to remove metal foreign objects using a magnet when loading onto the truck. As a result, we decided to install a square grid magnet at the discharge outlet of the hopper. We created space to install two tiers of square grid magnets at the outlet of the square hopper, added a door for opening and closing, and manufactured it anew to allow for maintenance. After completing the installation of the "square grid magnet," we enabled processing of one ton each time. As a result, we were able to remove the metal foreign objects requested by the client during loading onto the truck, thus fulfilling the client's request. If you are having trouble with the removal of iron powder, iron pieces, or nails mixed in with your raw materials, please consult Sangyo Supply first. 【Installation Example】 ■ Installation Site: Soda Ash Receiving and Storage Company ■ Installed Product: Square Grid Magnet *For more details, please refer to the related links or feel free to contact us.

When milling rice for confectionery, there was a significant amount of iron powder mixed in from the start, necessitating thorough removal of the iron powder. When we requested the installation of magnets from the equipment supplier, we faced difficulties because the number of magnets was low, and their ability to remove metal foreign substances was inadequate, yet they were expensive. We changed the milling process and designed and installed space for two "grid-type magnets, fixed at both ends, single stage" in the lower piping of the inlet hopper in the new equipment. We also installed a "magnet" at the outlet. The desired magnets were completed, and since the price was reasonable, it was a relief. Additionally, complaints from the confectionery manufacturer ceased, and production costs were reduced. [Installation Case] ■ Installation Site: Rice milling company for confectionery ■ Installed Products - Grid-type magnets, fixed at both ends, single stage (2 units) - Magnet *For more details, please refer to the related links or feel free to contact us.

We offer free lending of magnet bars for foreign matter removal with our magnetic separators for those who would like to test them before purchasing. The quantity available for free lending is one. The sizes available are limited to those in our lending inventory, and the length will be shorter. If you wish to request a free loan, please contact us. 【Overview】 ■ The quantity available for free lending is one. ■ Sizes are limited to those in the lending inventory, and the length will be shorter. ■ The lending period is 7 days from the shipping date. ■ The return shipping cost to our company is to be borne by the customer. *For more details, please refer to the PDF document or feel free to contact us.