鈴城製作所 List of Products and Services

The "BR type" is a suitable guide roller for corner sections where the axis center is offset from the frame part. Additionally, it is also available as an option for "SB guide rollers," "NB guide rollers," and "TB guide rollers." 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching 　(HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating 　(Hardness HV750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "KRP type" is a guide roller with brackets for dual support types. Since it is a dual support type, it can be used in places where loads are applied and for primary receiving of workpieces. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching 　 (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating 　 (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "STC type" is a guide roller that opens and closes by rotating the lower handle, with the vertical roller based on the center. The horizontal roller opens and closes by distributing around the center. Adjustments are made by loosening the nut on the opposite side of the handle, making the adjustment, and then tightening it again. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency hardening 　（HRC 58° or higher / Effective hardening depth of 0.7mm or more） ■ Surface treatment: Hard chrome plating 　（Hardness HV 750 or higher / Thickness of 5μ or more） *For more details, please refer to the PDF document or feel free to contact us.

The "ST type" is a guide roller that opens and closes by rotating the lower handle, with the vertical roller based on the center. The horizontal roller can be adjusted to any position both up and down. The upper part of the horizontal roller uses a butterfly nut. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching 　 (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating 　 (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "SH type and SHL type" are guide rollers used when the guided workpieces are prone to coming off. The adjustment of the upper horizontal roller is secured using the butterfly nuts located at both ends. The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency hardening 　 (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating 　 (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The adjustment of the product's width (d) is done by loosening the nut that tightens the bar roller with a wrench, guiding the roller to the work width within the range of the long hole on the main body where the vertical roller is attached, and then moving and securing it with the nut. Additionally, the main body is also equipped with a long hole (N) for vertical adjustment, further expanding the adjustment range. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching 　(HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating 　(Hardness HV750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "TB type" is a guide roller that operates a single vertical roller by turning a knob. The range of motion is from 0 to (S+D). The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "NB type" is a guide roller that allows for the independent movement of two vertical rollers due to the knobs set on both sides. It is convenient when you need to change the center of the workpiece in the width direction. The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

The "SB type" is a guide roller that opens and closes simultaneously with two guide rollers through the rotation of a knob, distributing the center. It is convenient because it maintains the center even when the width of the work being guided changes. The roller material is SUJ2, and it has a surface treatment of hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.

This catalog provides a comprehensive introduction to the "Guide Rollers" handled by Suzushiro Manufacturing Co., Ltd. It features various products, including the Cross Guide Roller "CR type," which eliminates the hassle of center adjustment and significantly improves work efficiency, as well as the Guide Roller "SB type," which is convenient because it maintains the center even when the width of the work being guided changes. [Contents] ■ Cross Guide Roller ■ Guide Roller ■ Rod Roller ■ Correction Device ■ Grooved Roller *For more details, please refer to the PDF document or feel free to contact us.