SANKO ELECTRONIC LABORATORY CO.,LTD. List of Products and Services

The "331 Series" enables quick and accurate exploration and measurement without being affected by magnetic fields, moisture, or aggregates, thanks to its unique pulse induction technology. It features a lightweight and compact body with a waterproof structure suitable for everyday use (IP-65). It is also possible to check the corrosion level of rebar using a separately sold half-cell probe (for natural potential measurement). Additionally, it has built-in statistical calculation functions and a date clock function, allowing for data creation using a PC. 【Features】 - Easy operation with Japanese character display - Lightweight and compact - Not affected by magnetic fields, moisture, or aggregates - Rebar diameter measurement using right-angle measurement method - Built-in statistical calculation functions and date clock function, etc. *For more details, please refer to the PDF materials or feel free to contact us.

The "TB Series" uses domestically produced deformed rebar, which eliminates measurement errors caused by overseas rebar. The deformed rebar used in the test blocks meets JIS standards, allowing for measurement verification that is consistent with actual products. To easily confirm the center position of the rebar, each measurement area has a V-shaped slit, making it simple and accurate for anyone to check. Five types of test blocks are available: D10, D13, D16, D22, and D16L for deep exploration. They can also be used with rebar detectors from other manufacturers. 【Features】 ■ Uses domestically produced deformed rebar ■ Suitable for verifying equipment accuracy ■ Measurement checks are easy ■ Five types of test blocks available ■ Usable with rebar detectors from other manufacturers *For more details, please refer to the PDF document or feel free to contact us.

"Cover Master" is data analysis software for the rebar detector "331". Connect the rebar detector "331" to a computer and use this software. You can easily set measurement conditions, manage exploration data, perform graphic analysis, numerical analysis, and create reports. Additionally, it is possible to record measurement data and print it out. Data printing is also available using a separately sold dedicated printer. [Features] ■ For rebar detector "331" ■ Easy to operate ■ Capable of data management, analysis, and report creation ■ Can record measurement data and print it out *For more details, please refer to the PDF materials or feel free to contact us.

The "SIR EZ (LT) / EZ XT / EZ LXT" is a high-performance compact radar system for checking densely reinforced concrete structures and CD pipes with PC steel materials. Performance and functionality are constantly updated through software (SD card). It features a dustproof and drip-proof cabinet (IP64 standard), allowing inspections even in rainy weather. With automatic depth correction, all exploration depths can be accurately measured, providing clear images with extremely few multiple reflection waves. Additionally, it is possible to accurately measure the position of rebar and other materials using laser irradiation. 【Features】 ■ NETIS registered product: KT-120010-VE (SIR-EZ) ■ NETIS registered product: CB-160009-VE (SIR-EZ-XT / LXT) ■ Clear images with extremely few multiple reflection waves ■ 3D visualization software (optional) ■ Accurate measurements at all exploration depths with automatic depth correction ■ Lightweight and compact with excellent operability ■ Interchangeable handle for exploration in narrow spaces (SIR-EZ XT option) ■ Detects live wires up to 25 cm (SIR-EZ XT option) * For more details, please refer to the PDF materials or feel free to contact us.

The "CGC-01" is a dedicated inspection device for the testing and management of penetrating concrete protective agents. (Research Institute) Civil Engineering Research Institute Document No. 4186, Supplementary Document-3 In accordance with the "Method for Determining the Application of Penetrating Concrete Protective Agents (Draft)." It is capable of inspecting concrete surfaces coated with silane/siloxane-based and silane/fluorine-based penetrating concrete protective agents. 【Specifications】 ■ Judgment Method: Direct Current Electrical Resistance Method ■ Display Method: LCD display with hold function and battery level indicator ■ Power Supply: Four AA alkaline batteries (1.5V) with auto power-off ■ Operating Temperature: 0 to 40°C (must not condense) ■ Dimensions and Weight: 80 (W) x 35 (H) x 150 (D) mm, 300g *For more details, please refer to the PDF document or feel free to contact us.

The "Imp" is a detector that is not affected by small metals such as iron sand. By adopting pulse induction technology, it is less susceptible to the influence of small metals like barbed wire fences, buildings, and cigarette foil, allowing it to detect the position of metals vertically. It also alerts you with a loud signal sound when detecting in noisy surroundings, so there is no need to constantly look at the meter. The lightweight and compact body is also strong against shocks, making it convenient to carry. 【Features】 ■ Less affected by small metals ■ Detects the position of metals vertically ■ Alerts with a loud signal sound ■ Lightweight and compact ■ Excellent shock resistance *For more details, please refer to the PDF document or feel free to contact us.

"Crack Eye" is a portable crack width measurement device. It features simple operation with just a push of a button. It can measure within a range of 0.05mm to 2mm. It instantly measures the crack width of materials such as concrete and metal, displaying the width digitally. 【Features】 ■ Portable ■ Easy operation ■ Instant crack width measurement ■ Digital display of crack width ■ Usable on concrete, metal, and more *For more details, please refer to the PDF document or feel free to contact us.

● It has a built-in pump, and the suction flow rate is stable. ● The logging function allows for easy operation to record measurement values. ● It features a color LCD with excellent visibility and LED indicators. *For more details, please feel free to contact us.*

The "DK-ASB-2" is a screening kit that can determine the presence of asbestos in building materials in about 5 minutes. For demolition, renovation, and repair work of a certain scale that starts on or after April 1, 2022, it is now required to report the results of asbestos surveys, regardless of whether asbestos is present or not! 【Features】 ■ Easy to use ■ Detectable in about 5 minutes ■ Compact and easy to carry *For more details, please refer to the PDF document or feel free to contact us.

The "GX-3R" is a detector that continuously and simultaneously detects oxygen deficiency, flammable gases, and toxic gases. It has an intrinsically safe explosion-proof structure, with a protection rating equivalent to IP67. The detection targets are four types: oxygen, flammable gases, hydrogen sulfide, and carbon monoxide. (A-TYPE) It is possible to simultaneously display the gas concentrations of each component on a large LCD screen. Additionally, it is equipped with alarm functions such as a buzzer, flashing lights, and vibration. 【Features】 ■ Intrinsically safe explosion-proof structure ■ Protection rating equivalent to IP67 ■ Alarm via buzzer, flashing lights, and vibration ■ Simultaneous display of gas concentrations on a large LCD screen ■ Targets include oxygen, flammable gases, hydrogen sulfide, and carbon monoxide *For more details, please refer to the PDF document or feel free to contact us.

The "XO-2200" is a pocket-sized oxygen meter that protects the operator. It can be continuously used for about 5000 hours with a single AA alkaline battery. It alerts with lamps in four directions, a buzzer, and vibrations. Additionally, it is equipped with a peak value memory function and a peak hold function. 【Features】 ■ Pocket-sized ■ Alerts with buzzer, flashing lamps, and vibrations ■ Approximately 5000 hours of continuous use ■ Equipped with peak value memory function and peak hold function *For more details, please refer to the PDF document or feel free to contact us.

The "CTG-2" is a measuring device capable of measuring from concrete thickness to internal cavity exploration. The measurement depth ranges from 8 cm to a maximum of 1.8 m. (A hammer sound test is required for depths exceeding 60 cm.) The impactor and sensor are integrated, significantly improving operability and work efficiency. This product complies with ASTM C1383-4. 【Features】 ■ Instantly measures concrete thickness ■ Measurement depth ranges from 8 cm to a maximum of 1.8 m ■ Impactor and sensor are integrated ■ Improved operability and work efficiency ■ Complies with ASTM C1383-4 *For more details, please refer to the PDF document or feel free to contact us.

The "RJ Series" is a testing device suitable for investigating exterior wall deterioration and confirming construction quality. The mechanism is hydraulic, so no power supply is needed. It is compact and lightweight, allowing for easy measurements anywhere. It features a bright LED display that shows battery level, and it also includes voice announcements. 【Features】 ■ Hydraulic mechanism ■ No power supply needed ■ Compact and lightweight for easy measurement ■ Bright LED display for battery level ■ Voice announcements included *For more details, please refer to the PDF document or feel free to contact us.

● Colorful measurement screen display, backlight function ● Compact and lightweight design allows for work in tight spaces ● Target anchors M6 to M24, W1/4 to W1 *For more details, please feel free to contact us.*

The "R-7500" is a digital type test hammer that eliminates individual differences and allows for measurement value checks. Additionally, it has a built-in printer capable of printing various data. Equipped with a breather function to prevent dust intrusion, it maintains stable accuracy over long periods. 【Features】 ■ Digital type ■ Built-in printer ■ Capable of printing various data ■ Equipped with a breather function to prevent dust intrusion ■ Maintains stable accuracy for an extended period *For more details, please refer to the PDF document or feel free to contact us.

The N-6500 is an analog type that displays rebound values on a gauge. The main components are heat-treated and hard chrome plated. With polishing and the addition of a breather function, both accuracy and durability have significantly improved. This product is manufactured in accordance with the "Guidelines for Compression Strength Determination Methods (Draft)" by the Japan Society for Materials Science. 【Features】 ■ Displays rebound values on a gauge ■ Main components are heat-treated and hard chrome plated ■ Equipped with a breather function ■ Significant improvements in accuracy and durability ■ Complies with the "Guidelines for Compression Strength Determination Methods (Draft)" *For more details, please refer to the PDF document or feel free to contact us.

● Equipped with a high-precision fuel cell sensor ● Automatically captures a facial photo for identity verification ● Intuitive usability that anyone can use ● Simple design focused on functional beauty * The alcohol detector has a calibration period of one year to maintain accuracy. * Please feel free to contact us for more details.

"MK-770" is a detector for leak detection due to pipe corrosion and for detecting discharges from distribution boards and similar equipment. *For more details, please refer to the PDF document or feel free to contact us.*

"T-BLOCK" is a fully embedded temperature sensor. *For more details, please refer to the PDF document or feel free to contact us.*

Rapid exploration of position and cover thickness! Ideal for on-site inspections of housing defect liability insurance! 【Features】 ■ Complies with Japan Architectural Institute Construction Specification JASS5T-608 ■ Measurement method for rebar position in concrete using electromagnetic induction ■ Capable of exploring narrow areas with a compact sensor ■ Easy operation with a large, easy-to-read LCD display (with backlight) ■ Quick exploration of under-cover areas with lower limit setting function ■ Reliable Japanese manufacturing, calibration certificate available (for a fee) *For more details, please refer to the PDF document or feel free to contact us.

Sankou Electronic Research Institute has started handling rebar detectors. It enables rapid exploration of positions and cover thickness. It is suitable for on-site inspections for residential defect liability insurance. 【Features】 ■ Compliant with the Japan Architectural Institute's Construction Specification JASS5T-608 ■ Suitable for measuring rebar positions in concrete using electromagnetic induction methods ■ Capable of exploring narrow areas with a compact sensor ■ Easy operation with a large, easy-to-read LCD display (with backlight) ■ Quick exploration of areas with insufficient cover using the lower limit setting function ■ Reliable Japanese-made product, calibration certificate available (for a fee) *You can try a demo unit for free. For more details, please refer to the PDF materials or feel free to contact us.