ブロードコム（アバゴ・テクノロジー株式会社） List of Products and Services

The "ACPL-061L/C61L, ACNW261L" is a super low power photocoupler composed of AlGaAs LED and detector IC. This photocoupler has an extremely low power consumption, with an IC supply current of up to 1.5mA per channel across the entire temperature range. The forward current is only 1.6mA to 4mA, allowing it to be directly driven by most microcontrollers. 【Features】 ■ Ultra low supply current IDD: Maximum 1.5mA ■ With slew rate control function ■ Tri-state output via enable pin VE ■ Glitch-free during power-up and power-down ■ High speed: 10MBd (minimum) *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The ACML-7400 is a multi-channel high-speed CMOS digital isolator. These CMOS digital isolators utilize magnetic coupling through a thick insulation barrier, enabling high-speed transmission without compromising insulation performance. They also support a maximum propagation delay of 36 ns and a maximum pulse width distortion of 3 ns. Furthermore, they can operate at a data rate of 100 MBd. 【Features】 ■ Dual supply voltage support - 3.3 V and 5 V ■ Wide operating temperature range: -40℃ to 105℃ ■ Supports high-speed data rates of 100 MBd ■ Low power consumption - 15 mA/channel (Typ.) ■ Low propagation delay: 36 ns (Max.) *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The 『ACPL-077L』 is a photocoupler that employs CMOS IC technology and complies with the system-level standards IEC 61000-4-X (ESD/Burst/Surge). It achieves ultra-high-speed communication with a minimum data transmission rate of 25MBd and a maximum pulse width distortion of 6ns, along with low power consumption and reliability. The detector IC integrates a photodiode, a high-speed transimpedance amplifier, and a voltage comparator with an output driver. 【Features】 ■ 3.3V and 5V CMOS compatible ■ CMOS buffer input ■ Level shift function ■ High speed: DC to 25 MBd ■ Minimum common mode rejection ratio (CMR): 35kV/μs @ VCM=1000V *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The ACPL-M71T-000E is a high-temperature digital CMOS optocoupler in an SO-5 package. This product, suitable for hybrid and electric vehicles, achieves excellent performance and low power consumption using CMOS IC technology. All products are AEC-Q100 compliant and operate over a wide temperature range from -40°C to 125°C. 【Features】 ■ 5V CMOS compatible ■ Common mode noise rejection: 40kV/μs @ VCM=1000V ■ Operating temperature range: -40°C to 125°C ■ Low propagation delay: Power ACPL-M71T: 26ns @ IF=10mA (typical value) * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The ACPL-782T-000E is an isolation amplifier designed for automotive applications, featuring excellent high voltage insulation and common-mode noise rejection. In typical implementations, motor current or battery current flows through external resistors, and the resulting analog voltage drop is detected by the ACPL-782T. **Features** - VCM = Common-mode noise rejection: VCM = 1000V with over 15kV/μs - Compact and auto-insertable standard 8-pin DIP package (surface mount compatible) - Gain temperature drift: 30ppm/°C - Input offset voltage: 0.3mV (typical) - Signal bandwidth: 100 kHz (typical) *You can download the English version of the catalog.* *For more details, please refer to the PDF document or feel free to contact us.*

• Other electronic parts

The "ACPL-C87AT/C87BT" is an isolation amplifier designed for voltage detection. It features a 2V input range and a high input impedance of 1GΩ, making it suitable for high-precision DC voltage detection in applications such as electric motor drives, DC/DC and AC/DC conversion, and battery systems. By utilizing the shutdown function, the IDD1 current can be reduced to just 20μA, making it suitable for battery applications and other applications that are sensitive to power variations. 【Features】 ■ Sigma-Delta (Σ-Δ) modulation technology ■ Input impedance: 1GΩ ■ Nominal input range: 0 to 2V ■ Gain temperature drift: 25ppm/℃ ■ Offset temperature drift: 21μV/℃ *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The 『ACPL-K71T-000E』 is a high-speed CMOS digital optocoupler suitable for use in electric vehicles. Each channel consists of a CMOS detector IC that aggregates photodiodes, a high-speed transimpedance amplifier, and a voltage comparator with an output driver. It is equipped with reinforced insulation resistance and reliability necessary to achieve safe signal isolation in automotive and industrial applications that require high-temperature resistance. 【Features】 ■ Complies with Grade 1 test guidelines established by AEC-Q100 ■ Operating temperature range: -40 to 125℃ ■ 5V CMOS compatible ■ Excellent CMR (common mode rejection) performance: 40kV/μs @ common mode voltage V CM = 1000V * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The 『ACNV3130-000E』 is a phototransistor optocoupler for driving IGBTs, consisting of an LED utilizing AlGaAs technology and an integrated circuit that optically couples to it. It features an output stage capable of achieving a maximum peak output current of 2.5A, allowing it to drive IGBTs with a maximum rating of 1700V/100A. It achieves an isolation voltage V ISO of 7.5kV RMS and a working isolation withstand voltage V IORM of 2262V PEAK, which are necessary for certification under UL standards and IEC 60747-5-5 standards. 【Features】 ■ Maximum peak output current of 2.5A ■ Propagation delay of up to 500ns ■ Maximum error in propagation delay of 350ns ■ Excellent CMR (Common Mode Rejection) performance: 40kV/μs at common mode voltage V CM = 1500V ■ Supply current I CC is a maximum of 5.0mA *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

• Coupler

The 『ACPL-339J-000E』 is a high-performance 1A peak dual output IGBT and power MOSFET gate driver optocoupler. It supports MOSFET buffers with various rated currents. The design changes for important circuit isolation and short-circuit prevention due to component changes can maximize the scalability of gate drive designs for motor control and power conversion applications, from low-power to high-power settings. 【Features】 ■ Dual output for driving external NMOS and PMOS buffers ■ Minimum peak output current of 1.0A ■ Activity timing control to prevent upper and lower short circuits in MOSFET buffers ■ IGBT desaturation (DESAT) detection ■ Optically isolated DESAT and UVLO fault feedback * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The 『ACPL-W346-000E』 is a high-speed gate drive phototransistor optocoupler that incorporates an AlGaAs LED and is optically coupled to an integrated circuit with a power output stage, providing a peak output current of 2.5A. The wide operating voltage range of the power stage supplies the necessary drive voltage for gate control devices. The voltage and high peak output current are ideal for directly driving MOSFETs at high switching frequencies, enhancing conversion efficiency. 【Features】 ■ Maximum peak output current: 2.5A ■ Minimum peak output current: 2.0A ■ Rail-to-rail output ■ Maximum propagation delay: 120ns ■ Maximum propagation delay difference: 50ns *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The ACSL-7210-00RE is a high-speed CMOS optocoupler optimized for bidirectional industrial communication networks using high-speed protocols such as PROFIBUS fieldbus and Serial Peripheral Interface (SPI). Utilizing Avago Technology's proprietary CMOS IC and patented packaging technology, it achieves a high isolation voltage of 3750V RMS in a narrow SOIC-8 package with a thickness of less than 2mm. It meets the needs for digital signal isolation design in high-speed industrial communication networks, enabling a transmission delay of 40ns and a maximum pulse width distortion of 10ns. 【Features】 ■ Dual channel (bidirectional) ■ 3.3V and 5V CMOS compatible ■ CMOS input/output ■ High speed: DC to 25MBd ■ Maximum transmission delay 40ns * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The ACPL-337J-000E is a fully functional 4.0A output gate drive photocoupler that can directly drive IGBTs and power MOSFETs. It is equipped with a high DESAT brake current source and feedback function with undervoltage lockout (UVLO). It allows for easy play in motor control and power inverter/converter applications. 【Features】 ■ Maximum peak output current: 4.0A ■ Rail-to-rail output voltage ■ Mirror clamp sink current: 2.0A ■ Built-in protection function for FETs/IGBTs ■ Maximum propagation delay (across the entire temperature range): 250ns * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The ACNT-H87B-000E is an optical isolation amplifier specifically designed for voltage detection. With an input voltage range of +2V and a high input impedance of 1GΩ, it accommodates high voltages for general DC link voltage detection in applications such as motor drives and renewable energy systems by using a resistive voltage divider to match the high voltage to the input voltage range of the voltage sensor. It outputs a differential output voltage proportional to the input voltage through optical isolation. 【Features】 ■ Universal gain of 1V/V, ±1% high gain accuracy (ACNT-H87B) ■ Input impedance: 1GΩ ■ Linear input voltage range: 0 to 2V ■ Small gain temperature drift: –35 ppm/℃ ■ Offset voltage drift: 21μV/℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Amplifier

The 『ACPL-W349-000E』 is a high-speed gate drive photocoupler device with a built-in AlGaAs LED and a power output stage that couples optically to integrated circuits. This device is used in power conversion applications. The wide operating voltage range of the power stage provides the necessary drive voltage for gate control elements. 【Features】 ■ Maximum peak output current: 2.5A ■ Wide operating voltage Vcc range: 15–30V ■ Maximum propagation delay: 110ns ■ Maximum propagation delay difference: 50ns ■ Rail-to-rail output voltage *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The "ACPL-M51L-000E" is a low-power, low-supply-voltage 1Mbd digital optocoupler that can be connected and used as a 4-terminal device. It provides electrical isolation between the input and output using an insulating layer between the light-emitting diode and the optical detector. In addition to TTL/CMOS and TTL/LSTTL interfaces, it can also be used for analog applications. 【Features】 ■ Wide supply voltage range VCC: 2.25 to 24V ■ Low LED drive current: 3mA (minimum) ■ Open collector output ■ TTL compatible output ■ Compact SO-5 package * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Coupler

The 『ACNT-H61L-000E』 is a low-power digital optocoupler with a creepage distance and clearance of 14.2mm, designed for surface mount packages. It combines an AlGaAs light-emitting diode (LED) and a high-gain photodetector IC for system control. This device has extremely low power consumption, with a maximum supply current of 2mA over a wide temperature range. It is suitable for insulated communication logic interfaces and control in high-voltage power systems such as renewable energy inverters and medical devices. 【Features】 ■ Low supply current (I DD): up to 2mA ■ Low input current support: minimum 5mA ■ Common mode rejection (CMR): 20kV/μs @ V CM=1,000V ■ High-speed interface: minimum 10MBd ■ Wide temperature range: -40℃ to +105℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Coupler

The "ACNT-H313-000E" is a high-performance 2.5A gate driver optocoupler with a creepage distance and clearance of 14.2mm. The voltage output and high peak current of the optocoupler allow for direct driving of IGBTs. It adopts a stretch SO8 package with a creepage distance and clearance of 14.2mm, providing the long creepage and clearance required for high voltage power supply applications, as well as a high reinforced insulation voltage. 【Features】 ■ Maximum peak output current: 2.5A ■ Minimum peak output current: 2.0A ■ Maximum propagation delay: 500ns ■ Maximum propagation delay difference: 350ns ■ Minimum common mode rejection (CMR) performance: 40kV/μs @ VCM = 20,000V * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The ACPL-302J-000E is an IGBT gate driver optocoupler with a built-in isolated flyback DC-DC converter controller, providing a 2.5A output. With its high-speed transmission delay performance, it achieves excellent timing control and efficiency. It is ideal for driving IGBTs and power MOSFETs in applications such as industrial inverters, motor drives, power equipment, and renewable energy generation. 【Features】 ■ Stabilized output voltage: 20V ■ Wide input voltage range: 8–18V ■ Maximum peak output current: ±2.5A ■ Rail-to-rail output voltage ■ Mirror clamp sink current: 1.7A * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The 『ASSR-601J-000E』 is a high-voltage solid-state relay designed for industrial equipment. Thanks to Broadcom's R2Coupler and galvanically isolated photocoupler technology, it provides reinforced isolation and robust reliability, enabling safe signal isolation required for high-temperature industrial applications. 【Features】 ■ Compact solid-state bidirectional signal switch ■ Operating temperature range: -40°C to 110°C ■ Breakdown voltage, VO(OFF): 1,500V @ IO=0.25mA ■ Avalanche-rated MOSFET ■ Output leakage current, IO < 1mA @ VO=1,000V * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The ACPL-5700L is a commercial-grade, single-channel, 3.3V hermetic photocoupler using an 8-pin DIP ceramic package. Each device consists of a high-gain photodetector IC optically coupled to a GaAsP LED. The high-gain output stage is an open-collector photodarlington that achieves both low saturation voltage and high-speed signal transmission. 【Features】 ■ Commercial grade, single-channel, 8-pin DIP ■ Operating temperature range: -55°C to 125°C ■ Low power consumption ■ 3.3V supply voltage ■ Available in MIL-PRF-38534 Class H and Class K *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The ACPL-798J is a secondary sigma-delta modulator equipped with galvanic isolation utilizing optical coupling technology, which oversamples analog input signals into a high-speed 1-bit data stream. It operates on a 5V power supply and achieves a dynamic range of 82dB through an appropriate digital filter. To enhance signal integrity, it features LVDS interfaces for both clock input and data output. **Features** - External clock input range: up to 25MHz - LVDS clock and data interface - 1-bit secondary sigma-delta modulator - No missing code 16-bit resolution (12-bit ENOB) - SNDR: standard 75dB *You can download the English version of the catalog.* *For more details, please refer to the PDF materials or feel free to contact us.*

• Other electronic parts

The 『ACNU-3430-000E』 is a 5A output gate drive photocoupler in an 11mm surface-mount SSO-8 package, designed for industrial applications with high voltage and space constraints, such as 600VAC motor drives and 1kVDC solar inverters. The compact package with an 11mm creepage distance and a 10.5mm clearance distance provides excellent high voltage protection and signal isolation in tight spaces. 【Features】 ■ Maximum peak output current: 5A ■ Rail-to-rail output voltage ■ UVLO based on VE ■ Maximum propagation delay: 150ns ■ Maximum propagation delay difference: 90ns * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The 『ACFL-5212T-000E』 is a dual-channel phot coupler compliant with automotive AEC-Q100 Grade 1 guidelines. Avago Technology's R2CouplerTM isolation products provide high insulation and reliability required in harsh environments such as automotive and high-temperature industrial applications. 【Features】 ■ Operating temperature -40℃ to 125℃ ■ 8mm package creepage and clearance distance ■ Maximum data rate of 20 kBd ■ LED current drive (IF): 0.8 to 16 mA ■ Low propagation delay: 20μs (maximum) * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The 『ACFL-6211T-000E』 is a dual-channel photocoupler for automotive use that is electrically isolated and galvanically insulated, providing an ideal isolated bidirectional power system communication interface. It is optimized for communication systems with a data rate of up to 15MBd and adopts a compact SSO-12 package with a board mounting area equivalent to that of an SSO-8 package. 【Features】 ■ Compliant with AEC-Q100 Grade 1 guidelines for automotive use ■ Operating temperature -40℃ to 125℃ ■ 5V CMOS output ■ 8mm package creepage and clearance ■ Maximum data rate of 15 MBd * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The ACFL-5211T-000E is a dual-channel photocoupler designed for bidirectional digital communication in automotive applications. It features two photocoupler channels that are internally aligned at 180 degrees to each other, providing suitable chip pin configurations for bidirectional Tx/Rx data communication and board layout. 【Features】 ■ Compliant with automotive AEC-Q100 Grade 1 guidelines ■ Operating temperature -40°C to 125°C ■ 8mm package creepage and clearance distances ■ Maximum data rate of 1 MBd ■ LED drive current (IF): 0.8 to 16mA * An English version of the catalog is available for download. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The "AFBR-S50MV85G" is a multi-pixel distance and motion measurement sensor using optical ToF (Time of Flight) technology. It has been specifically developed for industrial sensors and gesture sensors that require high speed, compact size, and low power consumption. With industry-leading ambient light suppression of up to 200,000 lux, it can be used without issues in outdoor environments. 【Features】 ■ Built-in 850nm laser light source ■ 9 to 16 multi-pixel illumination ■ FOV (Field of View) angle of 6.2°×6.2° (1.55×1.55°/pixel) ■ Ultra-fast measurement of up to 3 kHz ■ Supports distances up to 10m * You can download the English catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Sensors