ダイナトロン List of Products and Services

We will be showcasing "Labor-saving and error-free work utilizing CAM software," focusing on implementation-related products. We will also demonstrate implementation-related products and circuit board-related products. Please be sure to stop by our booth. Venue: Tokyo Big Sight, East Hall 4, 4C-15/4C-17 Dates: June 12 (Wed) to June 14 (Fri), 2024, 10:00 AM to 5:00 PM Pre-registration for attendance: https://jpca2024.jcdbizmatch.jp/jp/Registration

• Printed Circuit Board
• Circuit board design and manufacturing

We would like to share the latest information about the direct imager "Majesty-DI." ● A high-output type will be added to the "Majesty-DI" lineup. Its main applications include solder resist exposure and models compatible with low-sensitivity photosensitive resins. It can be widely used for solder resist exposure of printed circuit boards as well as for metal processing. ● Automation support To reduce manpower in the printed circuit board exposure process, we have implemented automation from input to receipt. It is also compatible with roll materials. ● Alternative operation to photo plotters By using UV film, it is possible to create exposure films in a yellow room. The Majesty-DI can be utilized as an alternative to photo plotters. ● Improved front-back alignment accuracy The alignment function utilizing the color development of DFR with UV marks on the exposure table eliminates the need for reference holes. It achieves a front-back alignment accuracy of 15μ (specification: actual value below 10μ). *For more details, please refer to the PDF materials or feel free to contact us.

• Printed Circuit Board
• Photomask
• Substrate transport device (loader/unloader)

The RFP-3226 is a raster photo plotter that employs 64 multi-beam compatible high-lifetime semiconductor lasers. It supports three types of film sizes, each with 100 sheets, for a maximum of 300 sheets, achieving a minimum line width of 10μm (with a drawing pitch of 1μm) and positioning accuracy of ±10μ. Additionally, it is compatible with laser photo plotter films for the currently used Red-LD light source (Fujifilm, AGFA, Kodak). 【Features】 ■ Low-cost compatibility ■ Stable high precision ■ Compatibility with conventional films ■ Automation compatibility *For more details, please download the PDF or feel free to contact us.

• Commercial printers

"New-Sight" is a top-side non-contact scanner image storage system that scans three-dimensional objects up to a height of 10 cm. Based on the scanned images, it allows for easy image comparison inspections with simple settings. [How to Use] - Detect discrepancies such as "missing insertions" and "incorrect orientations" after manual assembly work. - Save the assembled circuit board as a single image before shipping, allowing for image searches later. - Capture the same three-dimensional objects other than circuit boards to detect discrepancies before and after use or among identical products. *For more details, please refer to the related links or feel free to contact us.

• Scanner

"Freedom" is a program creation system for selective soldering equipment. By setting the pins that connect to the ground layer, it automatically adjusts the nozzle's operation and speed considering the required heat amount. When soldering with multiple devices, it can automatically allocate tasks to ensure uniform takt time for each device. It is equipped with a check function and features aimed at reducing data creation time and processing time. Additionally, our company will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. [Benefits] ■ Error checking of nearby components before processing is possible ■ Shortening of program creation time by accumulating component information ■ Automatic setting of optimal soldering routes to reduce processing time *For more details, please refer to the PDF materials or feel free to contact us.

• Other core systems

"Warp-Recovery" is a device that corrects warping that occurs during substrate manufacturing by passing it through heated press rollers and press cooling rollers. It corrects warping of printed circuit boards, eliminating manufacturing defects caused by warping. As chip components continue to miniaturize, this system will increasingly be required in both substrate manufacturing and component mounting. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Inline warping correction ■ Equipped with clean rollers to prevent dust and debris ■ Space-saving design with a total installation length of 3m ■ Adoption of heated press rollers and press cooling rollers *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Substrate transport device (loader/unloader)

The "Micro Hand Dispenser with Monitor MD-5575" is a micro hand dispenser that achieves precise dispensing while confirming with an LCD monitor. We offer a free demo unit for customers considering a purchase. 【Features】 ■ Equipped with a twin-air dispensing system, enabling manual dispensing of small amounts ■ Capable of stable discharge of high-viscosity liquids such as solder paste, metal paste, and various adhesives ■ Easy alignment by operating a manual XY table and manipulator (up and down movement of the nozzle) ■ Equipped with AF function, allowing observation at a high resolution of 1280×800 (60fps) ■ A manual system that makes small dispensing easy *For more details, please refer to the PDF document or feel free to contact us.

• dispenser
• Other work tools

"DynaViewer" is free software that can be used in circuit board design and manufacturing factories. It displays the component mounting status in 3D based on component information and Gerber data. You can easily check the mounting positions through component name searches and visually confirm component sizes and heights. With a high-speed 3D display engine, it smoothly shows the entire circuit board from various angles. 【Features】 ■ Supports reading and displaying extended Gerber and drill data. ■ Allows input of component mounting coordinates and bill of materials. ■ Enables setting of component size information. ■ Allows confirmation of component mounting images in 3D display. ■ Highlights mounting coordinates through component name searches. ■ Can be freely operated with mouse controls. ■ Quickly searches for component part numbers on the internet. * You can view other product lineups from the "PDF Download" section.

• Other production management systems
• Mounter
• Other mounting machines

The "ED20 Series" is a low-cost X-Y table type desktop robot system. It is a compact desktop model that can be installed anywhere, and with a dedicated PC application, it allows for the creation, saving, and reading of flexible coating recipes. With the auto-alignment feature, top view, and side view, monitoring on the circuit board can be performed. 【Features】 ■ Compact desktop model that can be installed anywhere ■ Achieves droplet dispensing of less than 1nL (nanoliter) and fine line drawing ■ Allows for the creation, saving, and reading of flexible coating recipes through a dedicated PC application ■ Monitoring on the circuit board with auto-alignment feature, top view, and side view ■ CAD data import is possible in DXF file format *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser
• Other production management systems

Dinatron Co., Ltd. handles "The Resin Coater" manufactured by Engineering Lab Co., Ltd. We offer the "CL Series" for module/chip level coating and the "WL Series" for wafer level coating. We support various shapes of application, including dots, lines, and bezels. 【Features】 ■ High throughput ■ Guard ring and dam formation ■ Sealing of chips, electrodes, etc. ■ High viscosity liquids (over 1000 Pa·s) ■ Full wafer/dot/line coating *For more details, please refer to the PDF materials or feel free to contact us.

• Other surface treatment equipment
• Other painting machines

The "High-Precision Dispensing Series" is a micro-hand dispenser suitable for manual work under a microscope. It can be connected to your existing controller for dispensing, allowing for the dispensing of various liquids such as Ag paste, titanium oxide, and solder paste. We offer a free demo unit for customers considering a purchase. 【Features】 ■ Can be connected to your existing controller for dispensing ■ Stable dispensing achieved through a self-suck-back mechanism ■ High viscosity dispensing: 1,000,000 cps ■ Controller also available ・Dispensing setting time: minimum 5 ms *For more details, please refer to the PDF document or feel free to contact us.

• dispenser
• Other work tools

This product is a high-precision dispenser using a twin-air method manufactured by Engineering Lab Co., Ltd., which we handle. Functionality expansion can be achieved with additional components. Please feel free to consult us regarding the system specifications. 【Features】 ■ Real-time monitoring of liquid flow ■ Observation of liquid flow and deposition state ■ Confirmation of the unevenness of the substrate ■ Gap confirmation with the nozzle tip ■ Real-time monitoring of wetting spread *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser
• Other work tools

"Stencil CAM" is a system specialized in editing the opening shapes of metal masks. As the miniaturization of chip components progresses, the importance of metal masks used for solder printing is increasing. This system provides an optimal editing environment for metal mask openings. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Editing metal data at the component level using component attributes and placement information ■ Replacement of foreign CAM systems ■ Free editing of metal mask data ■ ODB++ data support ■ Opening shape templates ■ Actual pitch recognition ■ Various checking functions *For more details, please refer to the PDF materials or feel free to contact us.

• Other production management systems

"PC-AutoCAM" is a high-performance and high-functionality system that meets modern needs. As the demand for high functionality and high performance in electronic devices increases, the requirements for printed circuit boards have also risen. This system responds to needs such as high precision, high quality, and large-capacity data processing, significantly shortening the lead time from design to manufacturing and improving productivity. [Features] ■ Data editing for printed circuit boards ■ Direct interface to manufacturing and inspection equipment ■ Reduction of operational costs by replacing foreign CAM systems ■ Support for ODB++ data output *For more details, please refer to the PDF materials or feel free to contact us.

• Other production management systems

"PC-MountCAM" is a component mounting data creation support system that provides total support for setup tasks at the assembly site. It is a new concept platform centered around component mounting data, achieving significant reductions in setup time, suitable work support for on-site workers, and digitization of data, leading to remarkable improvements in work efficiency. Work instructions for each process directed at on-site workers can be created in a short time, and the created work instructions can be displayed on tablets or monitors using a dedicated viewer. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Board image display function ■ Mounting data and Bill of Materials (BOM) conversion function ■ Assembly drawing creation function ■ Component expert library *For more details, please refer to the PDF materials or feel free to contact us.

• Other production management systems

★We have launched a subscription plan! With support included, you can use the latest version for 3 months or 1 year. You can reduce initial costs, and managing the increase or decrease of licenses is also easy. 'PC-MountCAM' is a system that streamlines component mounting operations. By inputting CAD information (Gerber data, component placement coordinates, bill of materials) output in various formats, information can be quickly disseminated to mounters, manual assembly, inspection processes, and more. In particular, it can significantly shorten the setup man-hours for component mounting drawings and specifications. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Examples of features included】 ■ Conversion of mounting data and bill of materials ■ Creation of mounting quick reference tables ■ Creation of mounting drawings ■ Component mounting guides ■ Creation of mounting data ■ Support for component inspection *For more details, please refer to the PDF materials or feel free to contact us.

• Other CAM related software
• Other production management systems

"Majesty-DI" is a direct imager suitable for printed circuit board manufacturing in Japan. It is ideal for replacing contact exposure machines or switching from film exposure. It uses a long-life LD as the light source and a uniquely developed DMD exposure engine. With a compact installation area of 1200×2500mm, it significantly reduces both initial and running costs. You can choose from eight models with practical specifications. 【Features】 ■ Practical exposure specifications ■ Low cost ■ Space-saving (installation area 1200×2500mm) ■ DI device suitable for circuit board manufacturing lines ■ High reliability and long-life laser head ■ Alternative DI for contact exposure machines *For more details, please refer to the PDF materials or feel free to contact us.

• Circuit board design and manufacturing
• Printed Circuit Board

The "MASK Writer" is a flat-type glass mask plotter compatible with large photo masks (32×28 inches). With an image processing processor and RIP software, it enables high-speed data processing and large-capacity data handling. Utilizing DLP technology, it can render fine patterns in high quality in a short time. 【Features】 ■ High resolution and high quality ■ Compatible with multi-sensitizing material emulsions ■ Supports large photo masks ■ Significantly reduces initial and running costs *For more details, please refer to the PDF document or feel free to contact us.

• Image Processing Equipment

"Meister" is a manufacturing system for assembly jigs that strongly supports the reduction of lead times and costs in the jig creation process. By collaborating with "MeisterCAM," it enables in-house production of high-precision jigs with easy operation. It achieves in-house production of jig manufacturing, which is required for high precision, ease of operation, and applicability in production sites, while reducing assembly costs. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ In-house production of assembly jigs and parts ■ Abundant processing materials ■ High safety and clean environment ■ Quick creation of processing data *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig
• Processing Jig
• Other mounting machines

"Lead-clinch" is a lead component cutting and clinching insertion machine that supports hand insertion tasks easily and accurately for anyone. It automatically cuts and clinches leads. It can also be linked with "PC-MountCAM." The insertion position and cut & clinch settings can be configured based on data such as CAD data or component mounting data, allowing for efficient preparation work even before the actual circuit boards arrive. *For more details, please download the PDF or contact us.*

• Printed Circuit Board
• Circuit board design and manufacturing
• Circuit board processing machine

"DynaViewer" is a tool for reading and displaying Gerber data and NC drill data. It allows for data analysis such as displaying D code and T code information, measuring distances between two points, and calculating data intervals. Additionally, you can check data from reports on layers, D codes, T codes, etc., while minimizing memory usage, making it easy to use even on a laptop. ★ Currently available for free. If you are interested, please apply through the DynaTron website. 【Features】 ■ Reads and displays standard Gerber, extended 274X Gerber, and drill data ■ Reads Gerber data without an aperture and allows for manual settings ■ Supports the setting and display of composite Gerber ■ Can display in film image format * You can view other product lineups from the "PDF Download" section.

• Other semiconductor manufacturing equipment
• Other analyses
• Analysis Services

"QuickSCALE" is a data reference image measurement device that requires no alignment and is alignment-free. It can measure multiple circuit boards simultaneously. Simply place the circuit boards on the table, and it will automatically measure the board outline, slits, hole diameters, and more in an instant. 【Features】 ■ Alignment-free and requires no positioning ■ Measurement points can be set from Gerber data ■ Tolerances can be set, and pass/fail judgment is made during board dimension measurement ■ Measurement results can be output as reports in print or Excel ■ Capable of measuring multiple circuit boards simultaneously *For more details, please refer to the PDF materials or feel free to contact us.

• Other image-related equipment
• Other measurement, recording and measuring instruments

"Stencil CAM" is a Gerber editing system specialized in creating and correcting metal mask shapes. It allows for flexible editing of metal mask shapes, contributing to improved implementation quality. It has been adopted by 70% of domestic metal mask manufacturing companies. By performing editing in-house, it is possible to cut costs by over 1 million yen annually. Additionally, our company will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Automatic opening conversion function ■ Automatically recognizes shapes and instantly converts them to suitable opening shapes from the library ■ Enables in-house editing of tasks previously outsourced to specialized companies ■ Abundant checking functions ■ Equipped with gap checks between openings and solder void checks, among others *For more details, please refer to the PDF materials or feel free to contact us.

• Other mounting machines
• Other operation management software

"PC-AutoCAM" is an all-in-one PCB integrated CAM system that has everything necessary for printed circuit board manufacturing. It analyzes data output from CAD to match manufacturing specifications. It automates CAM editing tasks that were traditionally done manually. By meeting the needs for high precision, high quality, and large-capacity data processing, it dramatically shortens lead times from design to manufacturing and improves productivity. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Rich art frame editing and utility, correction functions, and suitable paneling functions ■ Analyzes data output from CAD to match manufacturing specifications ■ Automates CAM editing tasks that were traditionally done manually ■ Outputs data for NC drilling machines and contour processing machines *For more details, please refer to the PDF materials or feel free to contact us.

• Printed Circuit Board
• Circuit board processing machine
• Other mounting machines

"MasterSCALEIII" is an automatic measuring device that can perform preliminary setup using Gerber data as a master. It allows for tolerance settings and outputs measurement result reports in Excel format indicating OK or NG. Additionally, it comes in four types to match measurement sizes, accommodating up to a maximum of 1000×1000mm. 【Features】 ■ An automatic measuring device that can perform preliminary setup using Gerber data as a master ■ Allows for tolerance settings and outputs measurement result reports in Excel format indicating OK or NG ■ Copper foil top/bottom measurement with a revolver head (MS-400, 600 option) ■ Four types available to match measurement sizes, supporting a maximum of 1000×1000mm *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Circuit board design and manufacturing
• Circuit board processing machine

"DynaFLEXII" enables smooth automatic pattern correction through finely tuned value settings for essential etching compensation to improve the yield of printed circuit boards. By specifying attributes such as lines, lands, and gold-plated terminals in the data, it automatically performs etching compensation set for each attribute while maintaining the minimum spacing. [Features] ■ Intelligent etching compensation ■ Shape retention compensation ■ Negative compensation ■ Finger compensation ■ Compensation data verification function *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Circuit board design and manufacturing
• Circuit board processing machine

"DynaViewer" is a tool for reading and displaying Gerber data and NC drill data. It enables data analysis such as displaying D code and T code information, measuring distances between two points, and calculating data intervals. Additionally, you can check data from reports on layers, D codes, T codes, etc., while minimizing memory usage, making it easy to use even on a laptop. ★ Currently available for free. If you are interested, please apply through the "Contact Us" section. 【Features】 ■ Reads and displays standard Gerber, extended 274X Gerber, and drill data ■ Can read Gerber data without an aperture and allows manual settings ■ Supports the setting and display of composite Gerber ■ Can display in film image format * You can view other product lineups from the "PDF Download" section.

• Other analyses
• Analysis Services
• others

In recent years, electronic devices have required a significant acceleration in the development cycle, leading to shorter lead times from the design of printed circuit boards to manufacturing and component assembly. 'PC-MountCAM' is a new concept platform centered around component mounting data, which drastically reduces the time required for creating assembly drawings, specifications, and setup, achieving remarkable efficiency that enhances competitiveness. 【Features】 ■ Mounting data and Bill of Materials (BOM) conversion function Automatically recognizes and converts mounting coordinate text data output from various CAD systems and formats for mounting data for assembly machines. ■ Gerber and drill image display By reading Gerber data and NC data as a board image, it allows for the preparation of assembly drawings and assembly data to begin even before the actual board is completed. *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• others

"Stencil CAM" is a data editing system specialized for metal masks, featuring functions such as checking. It is equipped with a wealth of tools for automatic processing of shape changes and size corrections. Additionally, it supports various data input and output formats used for transferring data with various CAD/CAM systems. 【Features】 ■ Correct and change opening positions on a per-part basis ■ Directly read data from the CAD database ■ Edit all terminals of a part in bulk ■ Automatically extract metal mask openings from pattern data ■ Generate half-etch data for printing guides *For more details, please refer to the PDF document or feel free to contact us.

• Other image-related equipment

The PCB integrated CAM system "PC-AutoCAM" is an all-in-one CAM system that includes all the necessary functions for printed circuit board manufacturing. It is equipped with various features such as "Gerber data editing," which allows input and output of various data used for handover with different CAD/CAM systems, DFM data analysis, and metal mask data editing. This system meets the needs for high precision, high quality, and large-capacity data processing, significantly shortening the lead time from design to manufacturing and improving productivity. 【Features】 ■ Gerber Data Editing Allows input and output of various data used for handover with different CAD/CAM systems. ■ Panel Layout Optimally arranges single-sided data for the manufacturing work size, making it easy to place necessary accessories. *For more details, please refer to the PDF materials or feel free to contact us.

• Other CAM related software
• Software (middle, driver, security, etc.)

The Dynatron's "MasterSCALE III" is a Gerber standard two-dimensional automatic measuring machine capable of measuring artwork films and printed circuit boards. It performs continuous automatic measurements based on Gerber data and is equipped with autofocus and shape automatic recognition functions. It eliminates measurement errors caused by edge sensors and outputs measurement reports and Excel data. 【Features】 ■ Standard equipped with LED reflective lighting and transmitted lighting ■ Elimination of measurement errors using edge sensors ■ Automatic measurement of V-cut width and position ■ Automatic recognition of etching line top/bottom ■ Automatic pass/fail judgment of measurement results *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

The Dynatron's "T11-Hp/Sp" is a metal mask laser processing device designed with consideration for the Earth's environment. It achieves data comparison inspection and automatic reprocessing for each opening process through onboard scanning, eliminating processing defects. Using compressed air as assist gas, it does not require cooling water or oxygen gas, resulting in a specification with low environmental impact. 【Features】 ■ High cost performance ■ Low environmental impact and low running costs ■ Opening inspection function and opening rework function ■ User-friendly operability ■ Abundant processing frames and metal frames *For more details, please refer to the PDF materials or feel free to contact us.

• Circuit board processing machine
• Other mounting machines

DynaFLEX II by Dynatron is an etching correction software that enables smooth pattern correction automatically through meticulous value settings. It specifies attributes such as lines, lands, and gold-plated terminals in the data, performing fully automated etching corrections set for each attribute while adhering to the minimum gap values, generating smooth correction data. It supports shape retention correction, negative correction, finger correction, and also includes a check function for data that has undergone etching correction. 【Features】 ■ Intelligent etching correction ■ Shape retention correction ■ Negative correction ■ Finger correction ■ Correction data verification function *For more details, please refer to the PDF materials or feel free to contact us.

• Image analysis software
• Software (middle, driver, security, etc.)

This catalog features products from Dynatron Co., Ltd., which deals with printed circuit boards, assembly, and CAD/CAM software. We introduce software and hardware for "board manufacturing related products" that supply PCB manufacturing data, as well as "component assembly related products" that provide process diagrams and fixture processing interfaces. Our company realizes customer requests with unique ideas and outstanding technical capabilities. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Featured Products (Excerpt)】 ■ Board Manufacturing Related Products (Software) ・PC-AutoCAM ・SmartLAYOUT ■ Component Assembly Related Products (Software) ・PC-MountCAM ・Stencil CAM *For more details, please refer to the PDF materials or feel free to contact us.

• Other embedded systems (software and hardware)