ヤガミ List of Products and Services

We offer an "Industrial Electric Heater System" aimed at the insulation and heating of piping and tank equipment. We provide various products such as "hose heaters" that maintain a constant temperature for solutions (such as sealants) heated by band heaters, and "container band heaters," among others, which enable stable pressure of the materials. 【System Components】 ■ Hose Heater ■ Container Band Heater ■ Container Drum Heater ■ Piping Trace Heater ■ Temperature Control Panel, etc. *For more details, please download the PDF or feel free to contact us.

• Other heaters

We provide "industrial electric heaters" intended for use in piping systems and various devices. Trace heaters serve as an alternative to steam tracing, enabling more precise temperature control compared to steam. We also offer "insulation jackets" that contribute to energy savings. 【Examples of Issues】 ■ When liquid sugar cools in the piping, its viscosity increases, making it difficult to transport. ■ Condensation occurs on the inside of the raw material hopper (causing the raw materials to stick). ■ We want to meet energy-saving targets. *For more details, please download the PDF or feel free to contact us.

• Other heaters

This catalog introduces the "recommended electric heaters for scientific research facilities" handled by Yagami Co., Ltd., which primarily provides educational science equipment and facility equipment. We offer a variety of products, including the indoor-only heater "Isotape ITH-150 type" with fiberglass insulation and the flexible tape-type electric heater "Tape Heater YELW-HS type." [Featured Products] ■ Isotape ITH-150 type ■ Tape Heater YELW-HS type ■ Ribbon Heater YW type ■ Tape Heater YELW-Q type ■ Silicone Belt Heater V type, etc. *For more details, please download the PDF or feel free to contact us.

• Other heaters

It is a highly efficient heater that can directly heat water or aqueous solutions contained in various containers such as buckets, tanks, bathtubs, and drums.

• Other heaters

It is a heater widely used for heating, preheating, and maintaining the temperature of various liquids.

• Other heaters

It can be mainly used for injection molding machines, extrusion molding machines, etc., and can uniformly heat plastic resins and the like. It exhibits excellent thermal efficiency and is stable both electrically and mechanically.

• Other heaters

This is a compact temperature control panel designed for temperature regulation of electric heaters.

• Safety Controller

It is equipped with insulation material that reduces heat dissipation to the surroundings, efficiently warming the container.

• Other heaters

It is compatible with IBC containers (1000×1200mm). The container is wrapped with a jacket heater and secured with nylon straps and buckles. Temperature control is also possible with a thermostat.

• Other heaters

By heating the canister from the sides and bottom, it prevents the solidification of the raw materials and facilitates the extraction of the contents.

• Heating device

It controls the temperature of various electric heaters in conjunction with a thermostat.

• Other heaters

This is a belt-type electric heater made from silicone rubber material that can be produced from a single piece. It is ideal for preventing condensation and freezing.

• Other heaters

The "cartridge heater" is a type of heater that has lead wires drawn out from one side and is used by being directly inserted into the object to be heated. It is mainly used as a heat source for press heating plates, molding machine molds, and various automatic machines, but it can also be utilized for liquid heating through welding processes such as bushings. It is easy to install and can be used for a wide range of heating applications, from localized to broad area heating. In addition to standard products and short delivery items, custom specifications can also be manufactured.

• Other heaters

This is a self-regulating tape-type electric heater designed for the purpose of insulating pipelines and their associated piping equipment (such as valves, drains, pumps, flanges, etc.), as well as various devices like tanks and hoppers.

• Other heaters
• Other physicochemical equipment

The "YSL Trace Heater" has a self-regulating function (self-limiting) built into the heater itself. Unlike resistance wire systems, the heating element has a surface structure, making heat transfer effective. It can be cut to any desired length, with no restrictions on the length that can be cut. Additionally, the ends after cutting can be insulated on-site using a dedicated termination kit (sold separately). 【Features】 ■ Automatically controls heat generation due to the self-regulating function (however, a separate temperature controller is required to maintain a constant temperature) ■ Unlike resistance wire systems, the heating element has a surface structure, making heat transfer effective ■ No restrictions on the length that can be cut (however, there are limitations on the maximum usable length for each model when used as a single unit)

• Other heaters
• Other physicochemical equipment

This is a self-regulating tape-type electric heater designed for insulation of pipelines and their piping equipment systems (valves, drains, pumps, flanges, etc.) as well as various devices such as tanks and hoppers. It allows for length adjustment on-site; however, overlapping wraps are not possible.

• Other heaters
• Other physicochemical equipment

This is a tape-type electric heater that is versatile and suitable for preventing freezing and solidification processes, maintaining insulation in pipeline and piping system valves and pumps, and for high-temperature applications.

• Other heaters
• Other physicochemical equipment

It is a flexible strip heater with heating elements covered in fiberglass. Custom-made products can be manufactured in addition to standard products.

• Other heaters
• Other physicochemical equipment

MI heating cables (Mineral Insulated Heating Cables) are cables that use inorganic materials as insulation. They are suitable for use in high-temperature applications.

• Other heaters
• Other physicochemical equipment

Silicone rubber heaters are flexible, thin sheet-type electric heaters made from silicone rubber reinforced with fiberglass. Utilizing the characteristics of silicone rubber, which is flexible and easy to process, they can be designed in various shapes and heat capacities for partial heating of various devices and equipment. They can be manufactured from a single piece.

• Heating device
• Silicon Heater

This is an electric heater specifically designed for each container, heating from the side of the container. It prevents solidification of the contents and reduces viscosity, making it easier to remove from the container. It eliminates residual raw materials within the container and promotes efficient use of materials. The product is designed to be simple and compact, allowing for easy attachment and detachment to the target container. It features a safety design compliant with PSE standards.

• Other heaters

By heating the sides and bottom of the drum, it addresses the reduction of viscosity and solidification of the contents. This eliminates residual materials and promotes the efficient use of raw materials.

• Other heaters

By heating from the sides and bottom of the 200L drum, it addresses issues such as the reduction of viscosity and solidification of the contents. It eliminates residual contents and promotes the efficient use of raw materials. The heater system is designed with a safe explosion-proof structure and can be used in Class 1 and Class 2 hazardous locations.

• Other heaters

Using steam or hot water as a heat medium, the drum can be insulated and heated. It can also be used for cooling applications by utilizing refrigerants.

• Other heaters

Using steam or hot water as a heat medium, it heats and insulates a one-gallon can. It can also be used for cooling purposes by using a refrigerant.

• Other heaters

It is easy to remove and attach, allowing for easy cleaning and maintenance of piping and equipment. This is a custom-made product that can be designed and manufactured from one piece to match the shape of the insulation heating surface, usage environment, and temperature conditions. Depending on the application, we carefully select materials for the outer layer, inner layer, and sewing thread, and it is compatible with insulation heating surfaces for piping and equipment systems, vacuum chambers, and various devices and instruments. It can accommodate heating temperatures from 180°C to 1000°C. Temperature sensors and fixed-temperature thermostats (for overheating prevention) can be sewn in. Temperature control is achieved through a separately sold temperature management system.

• Other heaters

This device is a waterproof temperature controller developed for use with electric heaters installed in outdoor pipelines, piping equipment, and tanks. The epoxy resin-coated waterproof case excels in corrosion resistance and dustproof functionality, and the power supply can be used freely up to AC 240V, designed to match the structure for temperature management on-site.

• Temperature and Humidity Control

A compact digital thermostat designed for electric heaters, suitable for both wall-mounted and tabletop use.

• Safety Controller

This device is a temperature controller developed for electric heaters used in hazardous locations or places where safety considerations are designed at scale, featuring a pressure-resistant explosion-proof structure. Note: To be used in hazardous locations, heaters must comply with domestic explosion-proof certification (technical standards). The heater will be a self-regulating type. The system configuration consists of a power connection box for connecting the power supply and heater, and a terminal processing box for insulating the terminal side of the heater, meaning the heater cannot be used alone. Additionally, to use it in hazardous locations, installation must be carried out in accordance with the contents of the explosion-proof certification, so please contact us for further details.

• Safety Controller
• Temperature and Humidity Control

In recent years, various measures have been sought to improve the environment, such as addressing global warming and reducing CO2 emissions. Insulation jackets can be easily attached to steam piping and various related devices that use boilers as a heat source in heat source machinery rooms installed in factories, hospitals, and large facilities. They help to reduce the amount of heat dissipated, demonstrating significant energy-saving effects, and are also expected to contribute to CO2 emission reduction.

• Other safety and hygiene products
• others

By unitizing straight pipes, elbows, T-joints, and bellows, they can be easily installed in various parts of the piping.

• Silicon Heater

A hose heater is an electric heater that can be used to maintain a constant temperature within a hose without "heat loss" during the process of transferring liquids or gases through a flexible hose. It can maintain the flexibility of the hose itself. You can select the type, material, diameter, pressure resistance, etc., of the hose tailored to the on-site usage for processing commercially available hoses. (It is also possible to perform heater processing on hoses provided by you.)

• Other processing machines

The micro heater is an electric heater with a high-temperature, high-load function, featuring a metal sleeve made of stainless steel or Inconel as its exterior.

• Other heaters