ロームヘルドハルダー List of Products and Services

This swivel-type "screw clamp lifting pin" with a shackle that rotates 360 degrees prevents loosening due to twisting of the sling and demonstrates its effectiveness even during horizontal lifting. Are you facing issues like "It takes time to screw in and remove the eye bolt," "I'm worried if the ball clamp type lifting pin can really support the load," or "I want to transport multiple heavy items quickly"? If so, the "screw clamp lifting pin" can solve these problems all at once. It can be quickly attached to workpieces with screw holes, allowing for the rapid transportation of multiple heavy items when mounted on the crane side! The suspension is done by inserting the screw engagement part into the screw hole, so there's no need for the through holes used with conventional ball clamp types, providing peace of mind. If you're having trouble with attaching and detaching eye bolts, please take a look. 【Features】 - Quick attachment and detachment for suspending heavy items - The shackle rotates - Improves work efficiency while keeping existing screw holes intact - Can be used by attaching to the wire end on the crane side, etc. *For more details, please download the PDF or contact us.

• Other machine tools
• Other machine elements

Are you experiencing any of the following concerns: 'There is rattling during lifting and lowering,' 'I want to lower it quietly since it carries precision equipment,' 'I am worried about vibrations during lifting and lowering'? The Rohm Helldorff hydraulic linear actuator 'RH1250' does not produce the bothersome rattling because its speed during retraction is almost constant regardless of the load. Therefore, it is used in medical devices, examination beds, nursing equipment, work tables, and more. Additionally, it does not require external energy, offers high flexibility in installation orientation, and is maintenance-free. 【Features】 ■ Maximum thrust from 4.5kN to 12.5kN ■ Mechanically operated hydraulic system with pedal control ■ No external energy required ■ Speed during retraction is almost constant regardless of the load ■ Maintenance-free, etc. *For more details, please download the PDF or contact us.

• Actuator

The "Screw Thread Clamp Type Lifting Pin" is a lifting device for heavy loads that can be used quickly and easily. Are you facing any of the following concerns? "It takes time to screw in and remove eye bolts," "I'm worried if the ball clamp type lifting pin can really support the load," "I want to transport multiple heavy items quickly." With the "Screw Thread Clamp Type Lifting Pin," these issues can be resolved all at once. It can be quickly attached to workpieces with screw holes, allowing for the rapid transportation of multiple heavy items when mounted on the crane side! The suspension is done by inserting the threaded engagement part into the screw hole, so there's no need for the through holes used with conventional ball clamp types, providing peace of mind. If you're having trouble with attaching and detaching eye bolts, please take a look. 【Features】 - One-touch attachment and detachment for suspending heavy items - Improved work efficiency while keeping existing screw holes intact - Can be used by attaching to the wire end on the crane side, etc. *For more details, please download the PDF or contact us.

• Other machine tools
• Other machine elements

The "Lifting Pin" is a product that allows for easy removal of the main body by pressing the push button on the pin itself. In addition to the traditional ball lock clamp type that uses through holes to suspend the workpiece, a screw thread clamp type that utilizes existing screw holes to suspend the workpiece has been introduced! By simply switching from eye bolts, which take time for installation and removal, to the "Lifting Pin," efficiency can be improved. There is no longer a need to screw in bolts. With easy attachment and detachment, multiple heavy objects can be quickly transported when installed on the wire end of a crane. If you are struggling with the attachment and detachment of eye bolts, please take a look. 【Features】 - One-touch attachment and detachment for suspending heavy objects - Improved work efficiency while leaving existing screw holes intact - Can be used when attached to the wire end of a crane - Safety factor designed for five times - Complies with CE standards and has obtained TUV certification *For repeated transport of the same heavy object, the use of a dedicated bushing is recommended. *For more details, please download the PDF or contact us.

• Other machine tools
• Other machine elements

"How do I choose a plunger?" "Are there different types of plungers?" "Can I choose the material?" "What exactly is a plunger?" Do you have such questions? This time, we are offering a free booklet that summarizes the spring plunger, which you may think you know but actually don’t. It provides detailed explanations from basic knowledge to selection, all in one book. [Contents (excerpt)] ■ What is a spring plunger? ■ Reference examples of spring plunger applications ■ List of spring plungers ■ Spring plunger selection table, etc. * We are also giving away a miniature sample set of spring plungers! If you are interested, please contact us.

• Other machine elements

The tolerance for the hole diameter for installing this product is allowed up to 0.2 mm. Adhesive is not required for installation, making assembly work easier. It is ideal for click mechanisms and simple fixing of plastic molded parts.

• Other machine elements

The Zero Point Clamping System "SPEEDY Basic Series" is a system that allows for positioning and fixing with just one touch. Are you facing any of the following issues? "Only skilled workers can set up," "There are fewer skilled workers, and no one can set up," "If anyone could easily position," "I'm afraid of forgetting to tighten." With the "SPEEDY Basic Series," setup can be done easily and quickly without needing skilled workers. The work is also simple and easy, which helps prevent forgetting to tighten. If you are having trouble with setup, please feel free to contact us. 【Features】 ■ Anyone can easily set up in a short time ■ Reduction of processing setup time ■ Lineup available in the industry's smallest class (Φ26 and above), etc. *For more details, please download the PDF or contact us.

• Vice Clamps

This is a recommended product from Hilma, Germany, which develops various solutions for quick die change (QDC). You can freely choose the die lifter according to the size of the press machine bed and T-slot, making retrofitting easy. If hydraulic, it can handle large loads, providing peace of mind. If spring-operated, there is no need for hydraulic supply, making installation even easier. In addition to roller types, ball types are also available, allowing for combinations based on the method of die change. If there are no T-slots, you can also embed an insert type by drilling holes in the bed.

• Hydraulic Equipment

The "Clamping Nut" from Röhmheld Halder GmbH is a clamping system that allows for easy clamping of molds (T-slots) using standard hex wrenches, such as T-shaped and L-shaped wrenches. Typically, T-slots for molds require larger bolt and nut sizes, necessitating the use of long wrenches for tightening. However, with the Clamping Nut, tightening can be easily accomplished with a small standard hex wrench. It offers various alternatives in strength and size, ranging from 15 to 150 kN / M12 to M30. 【Are you facing any of these issues with mold clamping work?】 ■ Clamping molds is difficult because long wrenches are needed... ■ Clamping in tight spaces is cumbersome... ■ Handles come off and pose a danger... ■ Different dimensions of fixed parts in molds require tool changes, which is a hassle... ■ Significant tightening force is needed for securing molds, making it labor-intensive... and more. Solve your mold clamping issues with the Clamping Nut! *For more details, please download the PDF or contact us.

• Vice Clamps

Are you facing issues such as long setup times and hazardous work at the manufacturing site? Is bolt tightening taking too much time? The magnetic clamp system 'M-TECS' is a clamping system that uses strong magnetic force to attract and secure molds. Since normal molding is done below 200 degrees, standard magnetic clamps are designed to handle up to about 120 degrees, and they cannot function effectively at high temperatures due to adverse effects on magnetism. However, 'M-TECS' can handle temperatures up to 240 degrees, allowing for the processing of special materials (next-generation special resins such as rubber, CFRP, and PEEK resin). Furthermore, it can connect and control up to eight platens, and the size can be freely set, allowing users to design as they wish. 【Features】 ◆ Instantly clamp molds with just the push of a button ◆ Capable of handling up to 240 degrees, enabling the processing of special materials ◆ Minimizes setup costs by allowing mold changes with just an electric current ◆ Maintains clamping force even during unexpected power outages due to permanent magnets, etc. *For more details, please download the PDF or contact us.

• Injection Molding Machine
• Vacuum forming machine
• Rubber Processing Machine

The design is based on ergonomics, allowing heavy objects to be set in the desired position with minimal effort, thereby reducing the physical burden during assembly work. Improved work precision also contributes to enhanced quality. It is dustproof and splash-proof compliant with IP54 standards, featuring a robust structure with high durability and load capacity suitable for industrial use. A foot switch can synchronize the operation of four lift modules. 【Modulog Features】 ◆ Safely and reliably lifts, rotates, tilts, and moves loads up to 600 kg ◆ Dustproof and splash-proof compliant with IP54 standards; robust industrial structure ◆ Multiple units can be used in synchronization ◆ Facilitates handling of heavy objects, creating a less tiring work environment ◆ Reduces the risk of accidents and injuries *Download the "Comprehensive Catalog with Usage Examples" for free now!* 【Featured Examples】 Docking process of axles and bodies Assembly of large hydraulic cylinders Assembly process of air conditioning equipment Tool change in machining centers Material transport and supply for injection molding machines, etc.

• Other work tools

This document explains "QDC." It provides clear explanations of basic knowledge, benefits of use, an overview of our company, and an introduction to "mechanical hydraulic clamping nuts." [Contents] ■ What is QDC ■ Benefits of use ■ Who is Röhmheld Halder Co., Ltd. ■ Features of Hilma's mechanical hydraulic clamping nuts *For more details, please download the PDF or contact us.

• Vice Clamps

This document explains the "5-Axis Machining Vise MC-PZ Balance." The MC-PZB, which incorporates a patented mechanism, has made it possible to address the challenges of clamping with multiple vises and to propose positioning clamps. It provides clear explanations of basic knowledge, the benefits of use, and an introduction to the "5-Axis Machining Vise MC-PZ Balance." [Contents] ■ What is the 5-Axis Machining Vise MC-PZ Balance? ■ Benefits of Use ■ Features of Hilma's Machining Vises *For more details, please download the PDF or contact us.

• Vice Clamps

【Features】 ◆ Usable in places where hydraulic clamps cannot be used ◆ Electric, so no piping work is required ◆ Maintains clamping force even during power outages ◆ High clamping force ◆ Adjustable clamping force ◆ Clamping status can be monitored ◆ Self-check with error messages and electric position detection included 【Applications】 ◆ General use in machine tools, jigs, and assembly machines ◆ Inspection equipment For more details, please refer to the catalog or feel free to contact us. We will propose products that suit your environment!

• Vice Clamps

【Problem】 Bending at the waist or adjusting one's body position to work on a workpiece places a significant burden on the waist and back, which can lead to lower back pain and health issues if it continues daily. Additionally, awkward postures can affect the quality of the work itself. ◆Easy handling of heavy objects for everyone ◆A work environment that is easy for women and the elderly to work in, reducing fatigue Rohmheld-Hauser's "Modulog" is a convenient tool that allows you to create a workbench where the height and orientation of assembled items can be freely adjusted just by combining modules such as lift and rotation units. It has already been implemented in the assembly processes of many major German manufacturers. 【Modulog Features】 - Safely and reliably lifts/rotates/inclines/moves workpieces up to 600 kg - Allows assembly work in the best position and posture at all times - Easily combinable according to purpose and challenges - Reduces physical strain and lowers the risk of accidents and injuries - Contributes to improved product quality ◆Download the 'catalog' for free now! For more details, please contact us or take a look at the catalog.

• Other work tools

This document explains the "5-axis machining vises." It provides clear explanations of basic knowledge, the benefits of use, an overview of our company, and an introduction to the "5-axis machining vises." [Contents] ■ What is a 5-axis machining vise? ■ Benefits of use ■ Overview of Roemheld-Hauder Co., Ltd. ■ Features of Hilma's machine vises *For more details, please download the PDF or contact us.

• Vice Clamps

Drop Zero (Module Zero Point System) allows for the one-touch attachment and detachment of workpieces simply by tightening the spindle with a wrench. It is ideal for machining five sides of a workpiece. Nipples (for zero point, die-cut type, floating type) are directly assembled onto the workpiece. Drop Zero can be stacked as needed. Drop Zero simplifies setup, reduces jig costs, and improves tool access. 【We will be exhibiting at JIMTOF 2018】 - Date: November 1 (Thursday) to November 6 (Tuesday), 9:00 AM to 5:00 PM - Venue: Tokyo Big Sight (Booth Number: WA042) If you have any questions, please feel free to contact us.

• Vice Clamps

Jaw width: 40, 60, 100, 125 Thanks to the new structure, we have successfully enhanced precision and rigidity. By heat treating and polishing all parts that make up the main body, we have improved assembly accuracy and optimized the position of the spindle to eliminate unnecessary moments. <Features> ◆ Firmly clamps the workpiece Adopts a structure that suppresses the opening of the vice and the lifting of the workpiece. ◆ Designed for easy 5-sided machining Compact structure, with only 4mm of clamping space for the workpiece, and a variety of jaw options available. ◆ No stamping process required Achieved through high rigidity and clamping force, with a special jaw insert (sold separately). ◆ Hydraulic drive, compatible with custom products Supports hydraulic drive and custom products (inquiries about automation, etc.). <Applications> ◆ Clamping for 5-axis machining workpieces ◆ Precision positioning clamps ◆ Automation-compatible clamps (hydraulic) ◆ Clamping using multiple vices for long workpieces (balance). A zero-point clamping system that enables one-touch setup. Stark's SPEEDY (product name) contributes to improved productivity and machining quality when combined with machine vices.

• Processing Jig

This document explains the "Zero Point Clamping System." It provides clear explanations of basic knowledge, the benefits of use, an overview of our company, and an introduction to the "Zero Point Clamping System." [Contents] ■ What is the Zero Point Clamping System? ■ Benefits of use ■ About Roemheld Halder Co., Ltd. ■ "SPEEDY" *For more details, please download the PDF or contact us.

• Vice Clamps

It is widely used in places where hydraulic-driven linear motion is required, such as the following: <Usage Examples> ● Positioning ● Clamping ● Supporting ● Locking/Unlocking <Operation> ● Double-acting <Features> ● 11 sizes, 5 types of stroke lengths ● Wide range of piston diameters: from Ø16 to Ø200 mm ● Wide range of stroke lengths: from 8 to 200 mm ● Wide thrust range: from 2 kN (Ø16 at 100 bar) to 1570 kN (Ø200 at 500 bar) ● Compact design ● Various fixing methods ● Various hydraulic supply methods ● Hardened piston rod ● Seals and wipers available in NBR or FKM ● FKM seals can be used up to 200°C ● Minimal oil leakage ● Maintenance-free Single-acting models are also available. For more details, please refer to the catalog or feel free to contact us. We will propose products that suit your environment!

• Hydraulic Equipment
• cylinder

In the case of 5-sided machining, the low height characteristic of this reach clamp and its ability to fit into horizontal holes for clamping is advantageous. <Features> - Compact with high clamping force - Can clamp holes and bag-shaped areas - Suitable for 5-sided machining - Available in two sizes, with and without self-locking - Can be directly connected to the hydraulic circuit of machine tools due to low pressure (7MPa or 10MPa) <Cautions> Since it generates a large force, the workpiece and fixture or machine tool must have sufficient strength to withstand this force. There is a risk of collision and pinching in the area where the clamping lever moves. Please ensure thorough air bleeding before use. For more details, please contact us or refer to the catalog.

• Vice Clamps

Move the mold to the clamping position by hand, and apply hydraulic pressure to clamp the mold. When the hydraulic pressure is released, the clamp will be released by spring force. The mold is fixed to the bed or ram surface of the press machine using T-bolts. <Features> - Easily conforms to the clamping surface due to the spherical washer - T-bolts come with anti-rotation features - High efficiency - Easy to handle and compact design - Clamping force of 60 to 104 kN - Long clamping stroke We offer a lineup including hollow piston cylinders, slide clamps, and push-chain type clamping systems. For more details, please contact us or refer to the catalog.

• Vice Clamps

Move the clamping nut by hand to the clamping position of the mold green part, rotate the entire assembly to preset it, and then apply pressure to the built-in hydraulic system by turning the hexagonal socket screw. This allows you to achieve a large clamping force with a small torque. <Features> - The clamping nut has a through-hole screw, allowing flexible adaptation to molds with different dimensions in the fixed part. - Simple operation by hand. We offer a lineup including hollow piston cylinders, slide clamps, and push-chain clamping systems. For more details, please contact us or refer to the catalog.

• Vice Clamps

■Swing Direction - Clockwise - Counterclockwise - No Swing (Rotation 0°) ■Bottom Flange Type or Screw-in Mount Type ■Hydraulic Supply Method - Joint Connection - O-ring Connection ■Choice of Single Acting and Double Acting Available ■Standard Equipped with FKM Wiper <Overload Protection Mechanism> A spring-loaded coupling between the piston and the swivel rod is designed to disengage in the following cases to protect the swing structure: - When the swing motion is obstructed - When the swing speed is too fast - When the clamp arm is improperly mounted For more details, please contact us.

• Hydraulic Equipment

The Zero Point Clamping System "SPEEDY Series" is a product that simultaneously achieves high-precision positioning and clamping. We offer a wide range of models, including hydraulic and 5-axis machining options. Additionally, the 5-axis machining machine vice "MC-P Series" is a product that boasts high rigidity and high precision with a compact design and sealed structure. It is available in both manual and hydraulic drive versions, with a maximum clamping force of 7.5 to 35 kN. The combination of these two products enables "one-touch setup," contributing to improved productivity and machining quality. 【We will be exhibiting at JIMTOF2018】 - Date: November 1 (Thursday) to November 6 (Tuesday), 9:00 AM to 5:00 PM - Venue: Tokyo Big Sight (Booth Number: WA042) *You can download the catalog for the above products from "PDF Download." If you have any questions, please feel free to contact us.

• Vice Clamps

The "Floating Clamp" is a clamping component that secures the workpiece to the fixture at three points and specifically clamps and holds areas prone to vibration. This product suppresses vibrations during processing and can clamp features such as ribs and tongue-like parts of the workpiece. It can also clamp without deforming the workpiece during primary processing of castings. There are five types of specifications available, and various types of jaws are also produced, allowing for interchangeable use according to application. 【Features】 ■ M12 (large and small sizes) - Type that clamps and locks simultaneously ■ M12 (large and small sizes) - Type that separates clamping and locking ■ M16 - Type that clamps and locks simultaneously - Suitable for heavy cutting of large workpieces *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

At Romheld Halder Co., Ltd., we primarily import, sell, and provide services for products from our German parent company Romheld and Halder. Romheld is a manufacturer that develops various clamps and positioning elements utilizing hydraulic and pneumatic technology. On the other hand, Halder manufactures and sells a wide range of products, including standard machine parts, manual clamping elements, modular fixture systems, and hammers. 【Main Products】 ■ Hydraulic and pneumatic clamping equipment and related devices from Romheld, Germany ■ Products from the Romheld Group companies ■ Standard machine parts and hammers from Halder, Germany ■ Various hydraulic, pneumatic, and manual clamping devices *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

By combining clamping and locking functions, we achieve the dual purpose in a single product! 【Applications】 After fixing the workpiece to the jig, it clamps and holds areas prone to vibration. 【Features】 ■ Suppresses vibrations during processing. ■ Usable for complex-shaped workpieces such as ribs. ■ Can clamp primary processed materials like castings without deforming the workpiece. ■ Two types available: one that fixes the workpiece position and clamping position (vertical direction) simultaneously, and another that fixes them separately. ■ Special jaws tailored to the shape of the workpiece are also available. ■ Support strength: 2-25 kN 【Typical Use Cases】 ■ Holding workpieces that are prone to vibration and deformation during processing. ■ High-precision machining of aircraft components. ■ Primary processing of castings and similar materials.

• Vice Clamps

The "Soft Hammer" is a hammer manufactured by Haldar that allows you to choose inserts of different hardness according to the material you are working with. It has the advantage of handling materials carefully and processing them accurately. By changing the hammer's insert according to the field, you can work effectively without damaging the materials. The housing can also be changed, allowing you to create a hammer suitable for your specific application. Furthermore, you can replace it with a handle of your preference, enabling you to create a hammer that fits you best. 【Features】 ■ Replaceable wear parts at any time ■ Inserts can be selected according to the material of the counterpart ■ Housing materials include cast iron, aluminum, or reinforced cast iron ■ Three types of handle materials *Please check the catalog for safety assembly instructions. *Currently, customers who download the PDF will have a chance to win a SIMPLEX cap in a lottery!

• hammer
• Other work tools

- Each component is positioned and aligned with 2.5mm pitch teeth, making installation adjustments easy. - The height of the clamp base is manufactured with a tolerance of ±0.01mm precision. - By using H7 tolerance holes for positioning, high-precision machining is made possible. - By using multiple clamp bases in alignment, it is also possible to handle multiple long workpieces. - Cylindrical workpieces can also be securely clamped using a dedicated support base.

• Vice Clamps

The Stark Corporation's Zero Point Clamping System "SPEEDY Series," which we handle, has newly added the built-in sensor "connect" series as products for positioning clamps aimed at connection points in automotive production systems (such as welding processes) and machinery. 【Applications】 This product is suitable for applications in automotive production systems (such as welding processes) and connection points of machinery. 【Features】 ■ Power Amplifying Clamp A power amplifying clamp utilizing a pneumatic double-acting system. This product clamps using spring force and further amplifies it with pneumatic pressure. The clamp release also operates pneumatically, and it maintains self-holding due to spring force even without pneumatic pressure. ■ Floating Mechanism A clamping mechanism that allows for lateral displacement. It absorbs thermal expansion and contraction of the workpiece, enabling the attachment and detachment of tilted nozzles. ■ Retractable Clamp Retractable force that maximizes clamping performance. Maximum retraction height of 4.5 mm. The retractable clamp suppresses vibrations and improves processing quality. It accommodates loading of workpieces by robots. For more details, please download the catalog or contact us.

• Vice Clamps

We have added a high-performance, cost-effective basic series to the Stark Corporation's zero-point clamping system, the SPEEDY series. 【Features】 ■ Compact Design The SPEEDY basic series offers compact products suitable for applications that require installation in limited spaces, with outer diameters of Φ27 (basic Y) and Φ54 (basic X). ■ High Positioning Accuracy and Clamping Force Simultaneously The SPEEDY basic X and Y types are suitable for applications such as inspection and assembly fixtures. The SPEEDY basic series is ideal for use as positioning clamping equipment in machine tools, various automated machines, and semiconductor and FPD-related devices. For customers who find it difficult to introduce the SPEEDY basic module alone (main unit), please use the quick clamp plate that already incorporates the SPEEDY basic module. It can be easily installed by bolting it to the machine or device table for use. ● For more details, please download the catalog or contact us.

• Vice Clamps

【Features】 ○ Minimum type (compact hydraulic clamp) ○ Housing is partially embedded ○ No piping connection required (hydraulic pressure supplied from the internal oil path of the fixture) ○ Easy attachment and detachment of workpieces to the fixture ○ Clamping possible without lateral force ○ Flat clamping lever allows clamping in narrow spaces ○ Unprocessed clamping lever can be machined to match the shape of the workpiece ○ Double-acting type comes standard with pneumatic position detection ○ Equipped with a metal wiper to protect the piston rod ○ Mounting direction and orientation are optional For more details, please contact us.

• Vice Clamps

The new mechanism's floating function allows for clamping in accordance with the workpiece without distortion within a stroke range of ±2mm. Additionally, the patented segment structure contributes to high precision and stability, reducing play in the guide section to nearly zero. The MC-P series, an improved and evolved version of the 5-axis machining machine vice MC series, has successfully enhanced accuracy and rigidity through its new structure. The development of the MC-P leverages the expertise and achievements in challenging cutting required for aircraft parts, improving assembly precision by hardening and polishing all parts that make up the main body, and optimizing the spindle position to eliminate unnecessary moments. Furthermore, the external dimensions and jaws of the main body maintain the same size as the previous model for compatibility. In particular, the MC-P ZB, which incorporates a patented mechanism, enables solutions for clamping challenges with multiple vices and proposals for positioning clamps. 【Applications】 - Clamping for 5-axis machining workpieces - Precision positioning clamps - Automation-compatible clamps (hydraulic) - Clamping using multiple vices for long workpieces (ZB type)

• Processing Jig

When fixing a large-sized "standard nut" to a bolt, it was necessary to use a "long handle" to tighten the nut with "great force." This required a wide space when tightening with the "long handle," and there was a risk of the handle coming off, which could lead to injuries for the operator or damage to the equipment. By using the HILMA company's clamping nut (mechanical hydraulic type), you can achieve "great tightening force" simply by tightening with a "hex wrench," as the built-in piston activates. Additionally, there is an optional tightening force checker that alerts you when the tightening force reaches its maximum by popping out a pin. Applications include fixing equipment, securing molds in press machines, holding workpieces during processing, and providing strong fastening in narrow spaces or places where hydraulic power cannot be used. For more details, please contact us or refer to the catalog.

• nut

Brauer Ltd. in the UK offers not only standard shapes but also unique products. The swing clamp in this product line features a simple design focused on practicality and is surface-hardened for durability. When a bolt is tightened with a wrench, the clamp arm descends and secures the workpiece. When the bolt is loosened, the clamp arm rises and disengages from the workpiece due to the built-in spring. The latest information, CAD data, and technical information can be downloaded from the headquarters website: https://www.brauer.co.uk/default.aspx. For more details, please contact us.

• Vice Clamps

This product features a simple design focused on practicality, and all parts undergo surface hardening treatment to enhance durability. Due to its robust structure, there are products that can be clamped not only by "hand" but also using a "hammer." The clamping force is very high, allowing for secure workholding without the need for expensive hydraulic clamping fixtures. 〇 Cam Ram Clamp + Clamping Force (manual operation): 750-850 daN + Clamping Force (hammer operation): 4000-5000 daN ○ Cam Swing Clamp + Clamping Force (manual operation): 300-600 daN + Clamping Force (hammer operation): 800-1200 daN 〇 Cam Push-Pull Clamp + Clamping Force (manual operation): 600-650 daN + Clamping Force (manual operation): 1500-2000 daN (L type) + Clamping Force (hammer operation): 1500-3000 daN The latest information, CAD data, and technical information can be downloaded from the headquarters website. https://www.brauer.co.uk/default.aspx

• Vice Clamps

HALDER has been manufacturing and selling high-precision standard machine parts for 80 years, with a lineup of over 8,000 standard products, and we also accommodate custom orders based on customer requests. We are offering a free copy of our new catalog of standard machine parts from HALDER to those who are interested. Since the quantity is limited, please contact us as soon as possible. ■Features - Manufacturing and selling high-precision standard parts for 80 years - A rich lineup of over 8,000 items - Custom orders available upon request For more details, please contact us or download the catalog.

• Assembly Jig
• Processing Jig

The new product "Ball Rotating Spring Plunger" features a resin component between the ball and the spring, allowing the ball to rotate smoothly. Compared to conventional types where the ball and spring are in direct contact, this design minimizes wear and resistance with the counterpart components by allowing the ball to rotate freely. Additionally, since the ball is supported by resin, it is also suitable for situations where electrical insulation is required.

• Other machine elements

The "Punch/Drop Hammer" is a punch ideal for assembly, repair, and maintenance work, as well as a drop hammer from Halder used for precise alignment and assembly tasks. The drop hammer can also be used as a punch. It is perfect for various assembly and repair tasks, especially for assembling automotive parts and working in tight spaces. 【Features of the Drop Hammer】 ■ Recoil-free ■ Nylon inserts are replaceable ■ Can be used as a punch 【Features of the Punch】 ■ Nylon inserts are replaceable *For more details, please refer to the catalog or feel free to contact us.

• hammer
• others

The "Recoil-Free Soft Hammer" is a product from Haldar that delivers extremely powerful strikes while significantly reducing the strain on the wrist compared to using a regular hammer, and it also decreases noise levels. Inside the head of the hammer, there is a small iron ball that drops slightly after the hammer strikes the target part, absorbing the recoil and transferring all the impact energy to the target. 【Features】 ■ Ergonomic shape for easy grip ■ Ideal for working in corners and edges ■ Recoil-free performance ■ Durability *For more details, please refer to the catalog or feel free to contact us.

• hammer
• Other work tools

The "HALDER Forestry Products" are products manufactured by Halder GmbH and handled by Lohmheld Halder Co., Ltd. We offer a lineup that includes the "Simplex Splitting Hammer," which integrates an axe and a soft hammer, and the "Simplex Splitting Axe." We also provide individual components such as "axe blades," "cast iron housings," and "hickory handles," which can be easily replaced. Additionally, we have "hand axes" and "twisted wedges" available. 【Features (Simplex Splitting Hammer)】 ■ Integration of axe and soft hammer ■ Blade forged from high-quality carbon steel and heat-treated ■ Hammer insert made of super plastic ■ Integrated protective part at the housing and handle base ■ KWF certified *For more details, please refer to the catalog or feel free to contact us.

• Other work tools

"Feroplex" is a combination hammer manufactured by Halder and distributed by Rohmheld Halder Co., Ltd. It features a steel pipe handle and an easy-to-grip rubber grip. The head is made of high-quality heat-treated steel with induction hardening, and the opposite side has a replaceable nylon insert. We also offer high-quality, long-lasting replacement inserts. 【Features】 ■ Combination of a steel hammer and a soft hammer ■ Steel pipe handle ■ Easy-to-grip rubber grip ■ Induction hardened high-quality heat-treated steel ■ Replaceable nylon insert *For more details, please refer to the catalog or feel free to contact us.

• hammer
• Other work tools

The "Soft Hammer" is a hammer made by Haldar that allows you to choose inserts of varying hardness according to the material you are working with. It has the advantage of handling materials carefully and processing them accurately, while also reducing the strain on the worker's wrist and arm. 【Features】 ■ All consumable parts can be replaced at any time. ■ Inserts can be selected according to the material being worked on. ■ The housing material can be cast iron, aluminum, or reinforced cast iron. ■ The handle is available in three types of materials. *For more details, please refer to the catalog or feel free to contact us.

• hammer
• Other work tools

"Max Craft" is a cast iron hammer manufactured by Halder and distributed by Romheld Halder Co., Ltd. It features a recoil suppression structure that allows all the force to be transmitted to the target. Additionally, it has low vibration during impact, which alleviates wrist shock and reduces fatigue. We also offer a "hickory handle" for the Max Craft iron hammer, which is easy to grip, robust, and finished with multiple layers of paint. [Features] - Recoil suppression structure - Rubber components inserted at the junction of the head and handle - Suppresses recoil and noise - Reduces fatigue - Chamfered finish *For more details, please refer to the catalog or feel free to contact us.

• hammer
• Other work tools