日東精工アナリテック List of Products and Services

The "Bio Tector B3500" is an online TOC analyzer that employs an advanced two-stage wet oxidation method, which is a patented unique system. With its automatic range switching function, it can track fluctuations in sample concentration and stably perform continuous measurements across multiple channels (up to 2 channels) with different concentrations. It is capable of handling environments with high salt concentrations and large amounts of calcium, and it automatically performs self-cleaning with each measurement, preventing the growth of bacteria and the adhesion of high-viscosity oils, thus achieving maintenance-free operation. 【Features】 ■ Self-cleaning function for automatic sampling lines ■ Equipped with a sample catch pod to effectively utilize acidic waste liquid as cleaning solution after measurement ■ Compact design that achieves low cost ■ High concentration TOC measurement ■ Wide correlation range ■ Maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

The "Bio Tector B7000" is an online TOC analyzer that can measure without dilution up to a maximum of 100,000 ppm. It is capable of handling environments with high salt concentrations and large amounts of calcium, and it automatically performs self-cleaning with each measurement to prevent the growth of bacteria and the adhesion of oils and fats, achieving maintenance-free operation. 【Features】 ■ Uses large-diameter sample tubes to eliminate clogging from dirt ■ Capable of measuring up to 6 channels with a single unit ■ Supports total nitrogen and total phosphorus measurements ■ Completely oxidizes samples containing 30% salt concentration and 12% calcium concentration ■ Compatible with SD memory cards *For more details, please refer to the catalog or feel free to contact us.

The "Hiresuta-UX" is a high resistance meter that measures resistivity, which is one of the evaluation criteria for materials. By measuring the surface resistivity and volume resistivity of various high-resistance materials, it contributes to production technology, quality control, and research and development. It allows for easy and accurate measurement of surface and volume resistivity of advanced materials, as well as research and development of antistatic materials and quality control on production lines. 【Features】 ■ Measurement range expanded to 10³ to 10¹⁴ Ω ■ 29 different applied voltages from 1 to 100V, allowing sequential switching of voltages for measurement ■ Built-in switch box functionality ■ Compatible with conventional U-type probes ■ Compliant with JIS K6911 For more details, please refer to the catalog or feel free to contact us.

The "High Resistance-UX MCP-HT800" is a touch panel high resistance meter that can accurately measure surface and volume resistivity in high resistance areas. Compared to our conventional products, the measurement range has been expanded to 10^3 Ω to 10^14 Ω, allowing for the measurement of resistivity of conductive materials and antistatic materials. Additionally, it can set 29 different applied voltage settings from 1 to 1000V, and the automatic sweep function for applied voltage enables the measurement of voltage characteristics of resistance values. 【Features】 ■ Built-in functionality of a switch box ■ Compatible with conventional U-type probes ■ Capable of outputting 2000 measurement results to a USB memory *For more details, please download the catalog or contact us.

- Understand the differences in shape and particle size distribution of various powders through the pressure dependence of resistivity and bulk density. - Equipped with four-probe electrodes and ring electrodes essential for measuring the resistivity of cylindrical samples within a cylinder. - Adopts a probe unit that can be easily exchanged and cleaned, allowing for one-touch attachment and detachment. - Connectable to the resistivity LoRes series and HiRes series, enabling a wide range of resistivity measurements from low to high resistance. - Options available for expansion into semi-automatic and fully automatic powder resistivity measurement systems (please consult us regarding system construction).

- File management of measurement conditions using the four-probe method (up to 18 measurement position files can be registered), simplifying the setting of conditions. - Interactive operation is possible with a 5.7-inch LCD monitor. - Equipped with a memory function for 1,000 measurement data, standard RS232C input/output interface, allowing remote control from a computer. - Measurement start/hold control via external contact signal is possible (requires optional foot switch MCP-FS01).

■Compact, lightweight, and easy-to-use handheld type ■Wide measurement range compatible with various materials, with a large LCD for easy result display ■Measurement results can be stored in memory for up to 1000 entries ■Data output to a dedicated printer (optional) and computer

The "CA-310" is a high-performance moisture measurement device equipped with functions compliant with GMP (Good Manufacturing Practice) standards. It achieves a resolution with a quantification limit of 5μg under dry conditions. In addition to the automatic measurement function, improvements in operability contribute to increased work efficiency. With wireless connectivity, the measurement unit can be operated remotely from the control unit, and the device status can be checked using mobile devices such as tablets. Moreover, by simply replacing the cell, it can accommodate a wide range from low to high concentrations. 【Features】 ■ SOP (Standard Operating Procedure) creation support function The steps taken can be output as text data or image data. ■ Convertible function It can be widely used for samples with varying moisture content, from high to low. ■ Barcode reader Information about reagents (Aqua Micron) can be automatically registered using commercially available barcode readers. (Reagent name / Lot number / Reagent expiration date, etc.) We will be exhibiting at "CPhI Japan 2025 (International Pharmaceutical Development Exhibition)" held from April 9 (Wednesday) to April 11 (Friday). *For more details about the product, please download the PDF document or contact us. *Feel free to reach out with any questions or inquiries.

The Mitsubishi Chemical resistivity meters, the Loresta and Hi-Resista series, are unique products created from the accumulation of development, application, and evaluation technologies for various materials. With the advancement of science and technology, a wide range of new and old materials, including metals, rubber, plastics, and ceramics, are being used for various purposes, particularly in the electrical and electronic fields. Among these, there has arisen a need to distinguish materials not qualitatively as conductive or insulating, but quantitatively by their resistivity as an absolute value. The low resistivity meter Loresta uses a four-probe method, while the high resistivity meter Hi-Resista employs a double-ring method, both conforming to standards such as JIS, and they are the only devices that can easily and accurately measure the absolute value of resistivity for various materials and components. They have already become specified models in many industries and are used in material research and development, as well as in quality control and acceptance testing during manufacturing processes. The system products for mapping large samples and measuring powder samples are also well-equipped, accommodating the evaluation of various new materials. If you have any concerns, please feel free to contact us.

■ Added an input voltage of 1.000V and expanded the measurement range up to 9.99x10^13Ω. A highly versatile resistivity meter that enables measurement in high resistance areas across a wide range of fields. ■ Interactive operation is possible with a 5.7-inch LCD monitor. ■ Equipped with a memory function for 1,000 measurement data points, standard RS232C input/output interface, and allows remote control from a computer.

The "DTN-300V" is suitable for the analysis of food, feed, livestock, and food manufacturers, and is a total nitrogen and protein analysis device that uses carbon dioxide as the carrier gas. Compared to devices that use helium gas, carbon dioxide is inexpensive and readily available, allowing for cost-effective and operationally considerate use. Equipped with an automatic oxygen mode, it monitors the combustion conditions and controls oxygen in real-time, enabling automatic measurement under optimal combustion conditions even for unknown samples. 【Features】 ■ Automatic measurement under optimal conditions ■ Self-regeneration of the reduction tube ■ Use of carbon dioxide as the carrier gas ■ User-friendly software ■ High salt specification (optional) *For more details, please refer to the PDF materials or feel free to contact us.

This product can precisely measure surface resistivity (Ω/□) and volume resistivity (Ω·cm) without being affected by the sample shape. Variations in the thickness and composition of conductive films, metal, and ITO thin films are immediately apparent, and it is possible to map samples up to 300mm² and perform continuous measurements of multiple samples. 【Features】 ■ Connects to the Loresta GX, allowing measurements from 10^-4 to 10^7 Ω range ■ Fully automated measurement, calculation, data processing, and 3D graph output ■ Sample size up to 300mm, with the ability to measure multiple samples ■ Measurement position settings can be done through grid input, line input, sequential input, and external coordinate data import ■ Comparator function that marks measurement points on the screen that fall outside the specified range *For more details, please refer to the PDF document or feel free to contact us.

The "GT-310" is an automatic titration device that can simultaneously measure up to four titrators and moisture meters. It allows for finer parameter settings compared to our conventional products, enabling accurate endpoint detection. It also features an automatic pH calibration function, and by using a multi-sample titrator, the process from pH calibration to sample measurement can be automated. Additionally, functions such as five-level authentication of measurement results have been added, enhancing data integrity. 【Features】 ■ 1μL burette resolution ■ Wireless connectivity for stirrers and multi-sample titrators ■ Supports polarimetry and conductivity titration (optional) *Product documentation can be viewed via "PDF Download."

Nitto Seiko Analytic will hold a "Titration Seminar" on July 12, 2023. In this seminar, we will invite a professor from Shinshu University to give a lecture on "The Basics of Titration" and "Neutralization Titration." In the third part, we will also introduce the intuitive and high-precision automatic titration device "GT-310." This product allows even first-time users to analyze using appropriate measurement parameters, just like experienced analysts. If you want to revisit volumetric titration, are a newcomer, or have recently taken on titration operations, please take this opportunity to participate actively. [Seminar Overview] ■ Date: July 12, 2023 (Wednesday) 13:30–16:15 ■ Participation fee: Free ■ Content: Basics of Titration - "Basics of Titration" (first half and second half), Neutralization Titration, Introduction of devices and applications, Device maintenance *For more details, please refer to the PDF document or feel free to contact us.

The "PT-200" is an integrating sphere turbidity meter that can accurately measure the turbidity of colored samples such as tap water, environmental water, soy sauce, and juice. Improvements in the optical system (adoption of halogen lamps, enlargement of light beam and integrating sphere) have enhanced reproducibility and stability in low turbidity ranges. By using a cell with an optical path length of 10mm, measurements can be taken from 0 to 1000 ppm without range switching, allowing for rapid measurement. 【Features】 ■ High sensitivity ■ Wide range ■ Flow cell pump (optional) ■ Real-time turbidity value graph display ■ Color measurement unit (optional) *For more details, please refer to the PDF document or feel free to contact us.

The "Loresstar GXII MCP-T710" is a high-precision, high-functionality low resistivity meter that accurately and easily measures the resistivity of materials. It enables high-precision measurements by eliminating contact resistance between the sample and probe, as well as lead wire resistance, and features a color LCD touch panel for high performance and easy operation. Correction coefficient settings, measurements, storage, output, and data management can all be executed with a touch. 【Features】 ■ Measurement range expanded from 0.001×10^-4 to 9,999×10^7Ω ■ Automatic measurement possible with just the press of the start button ■ Silicon mode allows for measurements of silicon wafers ■ Variable current application function accommodates samples that are difficult to pass current through ■ Current polarity reversal enables even more stable measurements ■ Real-time output of measurement results to a PC possible (using separately sold data logger software) *For more details, please refer to the PDF document or feel free to contact us.

The "Loresstar FX MCP-T380" is a simple low-resistance meter that accurately and easily measures the resistivity of materials. With a dedicated 4-probe setup, it allows for one-touch high-precision measurement of various materials. Simply press the start button for automatic measurement completion. Additionally, commercially available nickel-hydrogen batteries can be used. 【Features】 - The auto-hold function can be further enhanced with a timer setting to reliably capture measurement values. - In addition to the included AC holder, commercially available nickel-hydrogen batteries can also be used. - Measurement data can be directly output to a PC using data logger software (sold separately). *For more details, please refer to the PDF document or feel free to contact us.

The "AQF-5000H" is an automatic sample combustion device that enables simultaneous measurement of halogens and sulfur in samples using combustion ion chromatography. In addition to sample decomposition and automatic measurement with ion chromatography, the preparation of calibration solutions and dilution of absorbent solutions are also automated. It excels in the pretreatment of halogens (fluorine, chlorine, bromine, iodine) and sulfur measurement in solid and liquid samples. 【Features】 ■ Safe and reliable combustion ■ Humidified combustion system ■ Constant volume function ■ Improved processing capacity through schedule management ■ Automatic dilution function for absorbent solutions *For more details, please refer to the PDF materials or feel free to contact us.

This catalog includes explanations about resistance and a lineup of related products from Nitto Seiko Analytic, including resistance meters. We provide an overview of resistance and resistivity, as well as low resistance and high resistance, illustrated with diagrams. We also feature related products and measurement systems for the low resistance meter Loresta series and the high resistance meter Hilesta UX, so please feel free to read through it. 【Contents (partial)】 ■ Resistance and resistivity ■ Low resistance and high resistance ■ Measurement of low resistivity ■ Measurement of high resistivity ■ List of related products for the low resistivity meter Loresta series *For more details, please refer to the PDF document or feel free to contact us.

The "MCP-PD600" is an automatic powder resistance measurement system that automatically measures the volume resistivity of powders under any pressure simply by setting the probe unit containing the sample. It allows for easy measurement of the pressed density and resistivity of powders under pressure, making it suitable for powder property management. The built-in load cell in the unit accurately monitors loads up to 20kN. 【Features】 ■ All measurements are automatically completed by setting the load and pressing the start button. ■ Newly developed cylinder pump enables measurement at low loads (0.01kN). ■ Measurement up to 250MPa is possible using a high-pressure probe. ■ The use of a suction pump improves the fillability of powders and enhances the reproducibility of pressed density measurements. *For more details, please refer to the PDF document or feel free to contact us.

Nitto Seiko Analytic Co., Ltd. will hold a face-to-face moisture measurement technology seminar for the first time in five years. To deepen your understanding of the Karl Fischer (KF) moisture measurement method, we will provide a detailed introduction to the principles of the KF method, how to choose KF reagents, daily maintenance, and application examples. We sincerely look forward to your enthusiastic participation. Please feel free to contact us if you have any inquiries. 【Program Content】 ■ Part 1: Overview of Moisture Measurement by KF Method (30 minutes) ■ Part 2: Introduction to Moisture Measurement Devices (30 minutes) ■ Part 3: Tips for Moisture Measurement (40 minutes) ■ Part 4: Maintenance of Moisture Measurement Devices (40 minutes) *For more details, please refer to the PDF document or feel free to contact us.

Nitto Seiko Analytic Co., Ltd. will be exhibiting at "JASIS 2024" held at Makuhari Messe. We will showcase various analytical instruments, including a new automatic sample combustion device. You can download the exhibition invitation as a PDF. We sincerely hope you will visit us. 【Event Overview】 ■ Venue: Makuhari Messe International Exhibition Hall, Hall 6 ■ Booth Number: 6B-202 ■ Dates: September 4 (Wed) - 6 (Fri) 10:00 - 17:00