日本ヒーター List of Products and Services

A heater that directly heats air (gas). It also includes heating by radiation such as far-infrared and near-infrared.

The "QIA type" infrared heater with a reflective hood quickly heats, dries, and cures objects directly without warming the air in between. Additionally, the reflective hood allows for irradiation only in the forward direction. Since the heater surface is not treated with coatings, there is no concern about peeling, making it safe for use in food-related applications. 【Specifications】 ○ The irradiation part is made of opaque quartz. ○ Comes standard with a stainless steel reflective hood. ○ Installation should be horizontal as a principle. For more details, please contact us or download the catalog.

Since a screw-in type is used for the heater, it can be manufactured in a short lead time, and replacing the heater is also easy. Customization of voltage, heater capacity, and dimensions is possible, so please feel free to consult us.

The "CTA type" cartridge heater is a compact rod-shaped heater designed to heat air and gas. It is ideal for applications such as duct heaters, heating devices, thermal sources for industrial equipment, and heating air and other gases. It can also be applied to shell-type heaters integrated into casings. 【Features】 ○ Ideal for situations where there are constraints on the dimensions of containers or installation locations and a compact heater is desired. ○ Best suited for heating gases in piping with low flow rates. ○ Superior to exposed nichrome wire heaters in terms of electrical safety, pressure resistance, and applicability to various atmospheres. For more details, please contact us or download the catalog.

The "PLA5 type" air heating plate flange heater is a heater designed to heat flowing pressurized air, gas, etc. It is used as a heat source for drying parts in cleaning machines, air blowers, and other industrial equipment. 【Features】 - Achieves any desired power in a small space - Uses standard flanges, making it easy to obtain compatible flanges, and installation and replacement are simple - The gas contact parts are made of stainless steel, ensuring cleanliness For more details, please contact us or download the catalog.

The "IRP type" clean heater is a panel-type heater made of stainless steel that combines far-infrared radiation ceramic heaters, allowing you to choose the size and capacity. It has no dust-generating elements, is resistant to thermal shock, and excels in cold and heat cycle resistance. 【Specifications】 ○ A single panel can be used with a ceramic heater element with a power supply voltage of 200V and a power of 400W (100mm × 200mm). ○ The porcelain (ceramic) is coated with glaze (far-infrared radiation ceramics). ○ Continuous operating temperature is 500 degrees Celsius. For more details, please contact us or download the catalog.

The "SHH-UT type" heater for installation inside control panels is designed to be mounted inside the control panel to protect it from moisture and condensation, while maintaining a high level of electrical insulation resistance. Since the heater and the mounting legs are integrated, there is no need to create separate legs for installation, making it very convenient. The mounting hole section can be doubly insulated with the included bushing insulator, ensuring safety. 【Specifications】 ○ Power Supply/Voltage: 100V/200V, Single Phase ○ Material: Bonded Steel Plate → Additionally, custom products made of SUS304 and SUS430 are also available. ○ Installation: Uses bushing insulator BSN-16 For more details, please contact us or download the catalog.

For gas use. A type with a plate flange heater inserted into the casing. The heater part is made of SUS304, and the casing is standard SUS304. It is compatible with second-class pressure vessels.

The "Shell-Type Heater" from Japan Heater is installed in the middle of piping, allowing liquids or gases to pass through it, while the internal sheath heater directly heats the liquids or gases. It has lower equipment costs compared to steam heaters and can efficiently heat in a compact space. Right now, we are offering a comprehensive catalog for free! 【Features】 ● Custom-made according to your desired heating fluid, temperature, usage environment, and installation dimensions ● The outlet temperature of the heater can be set to your specifications ● The internal sheath heater is robust and reliable ● Compliance with regulations for second-class pressure vessels and hot water boilers is also possible *For more details, please download the catalog or contact us.

This is a compact electric heater that allows for the replacement of the heater element by unit, offering excellent maintenance capabilities. (The photo shows the DC-310, 200V three-phase 10kW model.)

It is an electric heater that is installed in the duct with a blower, designed to heat the gas flowing through the piping ducts of air conditioning and dryers.

It is compact and easy to install. It is equipped with a manual reset thermostat for preventing temperature rise inside the terminal box. The heater pipe is made of SUS304, making it robust and long-lasting. It is used for preheating and preventing freezing of various equipment and components. It can be used as a heat source for small heating devices and dryers.

At Japan Heater, heaters are classified into categories for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

The "GAA5 type" screw-in heater for air heating features a low watt density (2.5W/cm2) and is designed for air heating with a screw-in installation. 【Features】 ○ The gas contact part is made of stainless steel, ensuring cleanliness. ○ It is plug-type, making installation and replacement easy. ○ It can achieve any desired power in a small space. For more details, please contact us or download the catalog.

The far infrared paint drying machine "ADT-51αL" demonstrates excellent effects on putty, two-component primer (undercoat), water-based primer, and topcoat paint (10:1 to 2K). The wavelength of infrared is very close to the thermal absorption rate of the paint film, resulting in minimal reflection on the surface and efficiently and rapidly drying the entire paint film. It exhibits outstanding thermal absorption properties from two-component urethane paint to thermosetting paint, powder paint, and water-based paint. 【Features】 ○ Outstanding thermal efficiency ○ Simple operation and work procedures ○ High work efficiency ○ Excellent safety For more details, please contact us or download the catalog.

Ceramics Corporation is an Irish heater manufacturer with extensive experience and technical expertise in infrared heating, compliant with CE marking. Power supply voltage: single-phase 220-240V. Various standardized shapes are available.

The QIR-type heater is a "lamp heater" developed to utilize near-infrared radiation. It has a fast heat-up time and can obtain very clean energy due to its structure. The peak of its radiation energy spectrum is between 0.9 and 1.6 micrometers, making it effective for non-contact heating, especially in vacuum heating applications. 【Specifications】 ○ Shape: Standard is straight → Custom products will be made for shapes other than straight ○ Heater element outer diameter: OD10mm ○ Lead wire: Glass braided silicone-coated wire (LG wire) length 200mm For more details, please contact us or download the catalog.

The MTS type comes with a cover and is equipped with a heater lamp. It is also double insulated, making it safe.

The heater element uses an all-stainless steel sheath heater, achieving safety, durability, and long life with minimal dust generation.

It is a compact high-temperature hot air generator (electric heater) with a built-in temperature controller. It features a compact double-insulated structure, incorporating a blower and a temperature controller. Once the included power cord is connected to a power source, it can be used immediately.

It is a simple and robust structure that combines a proven joint-type duct heater DC model with commercially available blowers. It is an electric heater that produces clean warm air without any odor.

The "QA type" air high-temperature heater is a cylindrical heater that supports a heater element wrapped with nichrome wire around a ceramic insulator, using quartz glass. The protective casing is a stainless steel pipe with heat dissipation holes. 【Features】 - The heater part has an extremely compact structure. - The hot air outlet is made of quartz glass, providing excellent heat resistance. - Depending on the shape of the object to be heated, three types of outlets can be selected: straight round, flat, and spot types. - It has a fast startup time, allowing for high temperatures to be blown out in a short time after switching on. For more details, please contact us or download the catalog.

It is a mechanically robust and most basic electric heater that insulates the heating element from the metal pipe using insulating powder.

It is an electric heater used for heating in factories, ships, vehicles, etc.

In this catalog, you can view industrial heaters and their application products, control devices, electric heating components, and other related products that we handle. Heaters are classified based on the heating target (liquid, air, metal), making it easy to find products suitable for your application. You can also view various temperature controllers that match a wide range of heaters. Additionally, the catalog is filled with useful content for heater design, such as "thermal calculations," "power, current, and resistance values of electric heaters," and "heating power quick reference tables." 【Featured Products】 <For Liquid Heating> Shell-type heaters, inline pipe heaters, plate flange heaters, etc. <For Air Heating> Duct heaters, screw-in heaters, sheath heaters, etc. <For Metal Heating> Cartridge heaters, bolt heaters, hopper heaters, etc. <Temperature Controllers> Thermostats, digital temperature controllers, voltage controllers, control panels, etc. *You can view the excerpt version (which includes all products) from the "PDF Download." If you would like the complete version (booklet sent), please apply through the inquiry form.

In Japan, heaters are classified into categories for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

By simply connecting to a JIS standard flange, it can be directly heated without changing the liquid flow path, allowing for a flow rate of up to 10m³/min. It can be easily integrated into existing piping, eliminating the need to establish a separate piping line, and can be used as an additional heat source for plant facilities. It is also usable outdoors.

We would like to introduce the "Inline Heater for Air Heating" handled by Nippon Heater Co., Ltd. This product heats air or gas flowing through the piping line. By simply connecting it to a JIS standard flange, it can directly heat the gas without changing the flow path, and it can handle flow rates of up to 10m³/min. Additionally, we also offer the "Heater Controller T302 type with Overheat Prevention Function," which comes standard with temperature control, temperature anomaly detection, and overheat prevention features for heaters up to 3-phase 200V 10kW. 【Features of the Inline Heater for Air Heating】 ■ Easy installation in piping lines ■ Compatible with heating gases such as air and nitrogen ■ Usable outdoors ■ Equipped with K-type thermocouple for overheat prevention *For more details, please refer to the PDF document or feel free to contact us.