GOODMAN List of Products and Services

A pulse reflection type cable length measurement and diagnostic device that can store waveform and event data in the main memory for up to 50 locations (maximum 500 locations). 【Features】 ○ Saves waveform and event data, allowing for waveform analysis on a PC and comparison before and after fault recovery, as well as report printing. ○ Compatible with communication lines, power lines, and all-metal cables. ○ Easily identifies the content and location of faults through waveform analysis. ○ Measurement results can be downloaded to a PC via USB connection. ○ Large LCD display with backlight for easy visibility in dark environments. ○ Measures within 6000m with 11 range settings. ○ Convenient tone generator function for cable identification. ○ Memory for comparing faulted and healthy lines with two phenomena. ○ High-precision length measurement of ±1% within the range of 0 to 6000m. ● For other functions and details, please download the catalog.

A measuring device that can accurately determine the total length and fault points (breaks and short circuits) of all metal cables with the push of a button. 【Features】 ○ Reliable measurement of cables up to 2000m ○ Easy to handle ○ Easy-to-read meter display ○ Measurement accuracy within 1% in all modes ○ Tone generator function for cable tracing ○ Auto power-off feature ○ Convenient graphical battery level indicator ○ Comes with alligator clips and BNC connector ○ Sturdy, compact, and lightweight ● For other functions and details, please download the catalog.

Compact and lightweight! Pocket-sized cable stripper 【Features】 ○ Equipped with a safe and easy-to-use retractable knife and ripper for peeling cables ○ Utilizes a unique follow-up blade design, making vertical and horizontal cuts on cables extremely easy ○ Can cleanly strip cable sheaths from 4-28mm ○ Achieves an unprecedented lightness that overturns conventional stripper norms ○ Dimensions: 144mm ○ Weight: 70g ● For other functions and details, please contact us.

The waveform can identify the content and location of faults, diagnosing disconnections, short circuits, ground faults, branching, conductor disconnections, contact failures, water immersion, connector failures, sheath damage, and insulation failures. Terminals can be connected in an open, short-circuit, or equipment connection state, and data management and report creation can be done via PC link, allowing for the storage of up to 50 images and measurement data.

The "PTR600RC" is a digital cable locator equipped with a large-capacity lithium rechargeable battery, capable of supporting long hours of work. It can instantly search for the target line among numerous cables. It pinpoints the detection of disconnections, short circuits, and ground faults. It also allows for RST phase sequence confirmation and polarity checks for L1 and L2. Safe cable exploration without metal contact is achieved through clamp transmission, making it safe for various data lines, including LAN and control lines. 【Features】 - Reliable identification of target lines - Accident point detection is also possible - Detection of breakers and wiring routes compatible with terminals - Ability to explore hidden wiring routes - Non-contact transmission and reception support for de-energized and live wires *For more details, please refer to the PDF document or feel free to contact us.

The "Model 501" is an analog buried cable locator capable of detecting buried lines from low voltage to high voltage. It can accurately detect the position and depth of weak electrical lines, strong electrical lines, and iron pipes, allowing for the measurement of the location and depth of the target metal pipes and cables through sound and analog meter indications. With three transmission methods—"Direct Method," "Indirect Method," and "Clamp Method"—it can adapt to various situations. 【Features】 ■ Easy to handle and user-friendly ■ Three transmission methods suited for different sites ■ No worries about forgetting to turn off the switch ■ Can also detect plastic pipes with a separate search line (sold separately) *For more details, please refer to the catalog or feel free to contact us.

The "GFL3000" is a buried line leakage detection device that accurately detects disconnections and leakage points in buried communication and power cables. It quickly pinpoints high-resistance leakage points and is suitable for various surfaces such as pavement, grass, and concrete. It can also be used for long-distance accident point detection over 1 to 2 km, making it ideal for detecting faults (ground faults and disconnections) in snow-melting road heater lines. 【Features】 ■ Accurately detects high-resistance leakage points ■ Suitable for various surfaces ■ Usable for long-distance accident point detection ■ Capable of detecting disconnection points in road heaters ■ Easy to handle with a readable center distribution meter For more details, please refer to the catalog or feel free to contact us.

This catalog introduces electrical and communication products handled by Goodman Co., Ltd. It features a wide range of products including the cable certification analyzer "LanTEK IV," which allows for quick judgment of certification results based on the color of the light, the network multi-tester "NaviTEK NT," the buried cable and pipe locator "RD8200 G," and the TDR cable length measurement device "FC200." Please make use of this for selecting products. [Contents] ■ LAN Tester ■ Cable Locator ■ TDR ■ Electrical Communication Tools ■ Tone Probe Set *For more details, please refer to the PDF document or feel free to contact us.

The "500XPK2" is a tone probe set equipped with a digital filter. It allows for noise-free searching even within business phones and PBXs. It has excellent durability with an IP67 waterproof and dustproof case. Additionally, it features an AC100V detection function to ensure work safety. The transmission output can be switched between strong and weak depending on the exploration distance. 【Features】 ■ Equipped with a noise filter ■ Noise-free searching even within business phones and PBXs ■ AC100V detection function to ensure work safety ■ New design with rounded edges for a comfortable grip ■ Compact and robust body with a pressure load capacity of 100kg *For more details, please refer to the PDF document or feel free to contact us.

The "TX8000" is a TDR cable diagnostic and measurement device that can accurately measure cable lengths and diagnose fault points. It can measure the length of installed cables with just one end connected. It is also suitable for inventory management. Additionally, it features the ability to display sample waveforms of common fault points for comparison, making diagnosis easier. 【Features】 ■ Supports various metal cables up to 6 km in length ■ Usable with metal cables with two or more cores, including coaxial cables ■ Reliable waterproofing (IP67) for use even on rainy days ■ Impact-resistant body made of polycarbonate *For more details, please refer to the PDF document or feel free to contact us.

The "AT8LK" is a telephone and LAN combination set equipped with a transmitter that includes a LAN wiring checker. It features an LED blinking function for checking HUB ports. It is possible to transmit to individual conductors using each transmission terminal panel. Additionally, it has a simple one-touch push-button operation. 【Features】 ■ Compatible with telephone lines and coaxial cables ■ Includes an LED display battery check function ■ Simple one-touch push-button operation ■ Equipped with an LED blinking function for checking HUB ports ■ Capable of transmitting to individual conductors using each transmission terminal panel *For more details, please refer to the PDF document or feel free to contact us.

The "701K-G" is a tone probe set that allows for pair wire identification and cable tracing over insulation. It displays the distance to the point of disconnection or short circuit in digital numbers. The signal reception sensitivity can be adjusted, and the reception strength is clearly indicated by LED lighting. Additionally, we also offer the "701KRC Premium," which features a charging function. 【Features】 ■ Adjustable signal reception sensitivity ■ Clear indication of reception strength with LED lighting ■ Equipped with a dedicated speaker to ensure detailed sound quality ■ Capable of pair wire identification and cable tracing over insulation *For more details, please refer to the PDF document or feel free to contact us.

The 『PA1902』 is a LAN adapter equipped with an RJ-45 patch cable as standard. It can send the tone probe signal to any conductor through the RJ-45 connector. It also supports RJ-45 female connector terminals mounted on the wall with the included patch cable. Additionally, it clearly displays the numbers of the corresponding conductors on the terminal block. 【Features】 ■ Standard RJ-45 patch cable included ■ Can send signals to any conductor ■ Supports RJ-45 female connector terminals mounted on the wall ■ Clearly displays the numbers of the corresponding conductors on the terminal block *For more details, please refer to the PDF materials or feel free to contact us.

The "NC-100" is a LAN, telephone, and coaxial tester equipped with a wiring verification function featuring a backlit LCD display. It can detect shorts, opens, polarity, cross, and split pairs. It also includes a tone generator function that can be used for LAN, telephone, and coaxial connections. Additionally, it displays the distance to the point of disconnection or short circuit in digital numbers. 【Features】 ■ Wiring verification function with backlit LCD display ■ Standard equipped with RJ-11, RJ-45, and coaxial connectors ■ High voltage influx alarm function for safe connections ■ Compact and convenient body storage type remote (RJ-11, RJ-45, coaxial) *For more details, please refer to the PDF document or feel free to contact us.

The buried cable and pipe locator "RD8200 G" automatically removes interference from significant environmental noise, such as near substations and overhead power lines, allowing for exploration in environments with high electrical noise. Using a power filter, it accurately identifies only the desired power line among the different signal wavelengths emitted from numerous cables. By fine-tuning the receiving frequency, it is also possible to pinpoint locations in areas prone to noise interference or where multiple users are exploring simultaneously. Additionally, the GPS function displays the exploration route on Google Maps, enabling online record sharing, and diagnostic results can be immediately checked on the receiver's screen. 【Features】 ■ Automatically cuts environmental noise ■ Real-time location information ■ Power filter specialized for receiving power line signals ■ Self-diagnostic function to check the device's condition ■ Maximum exploration depth of 30m ■ IP65 waterproof design that prevents water and dust, ensuring safety even in rainy weather ■ Reliable 3-year warranty *For more details, please refer to the PDF document or feel free to contact us.

"TX Ranger S" is a TDR cable length measurement and diagnostic device that can identify the distance to fine fault locations. Measurement results are analyzed on a PC screen using dedicated software. It can store up to 50 events in the main memory. Additionally, it features a dual phenomenon display that allows for comparison between good and faulty lines, and it is compatible with all metal cables with two or more cores. [Features] ■ Capable of identifying the distance to fine fault locations ■ Measurement of remaining length of removed cables and drums ■ Cable fault details can be understood through waveforms ■ Wireless transmission of measurement data via Bluetooth ■ Fault diagnosis of terminal devices and sensors is also possible *For more details, please refer to the PDF document or feel free to contact us.

The "FC200S" is a cable length measurement and fault location device that can accurately measure distances up to 2 km with the push of a button. In addition to determining the distance to disconnection and short circuit points, it measures and manages the winding length of cable drums. It can identify the target line using a tone signal transmission function. You can also try a demo unit. Please feel free to contact us with any questions or inquiries. 【Features】 ■ Accurately measures lengths up to 2 km with the push of a button ■ Determines the distance to disconnection and short circuit points ■ Measures and manages the winding length of cable drums ■ Compatible with all metal cables with two or more cores ■ Identifies the target line using a tone signal transmission function *For more details, please refer to the PDF document or feel free to contact us.

The "TX2003S" is a high-performance ultra-compact pulse reflection tester that can send electromagnetic pulses through cables and measure the reflection time from terminals or fault points. It is capable of measuring the distance to cable breaks, short circuits, branches, and connection points. With the push of a button, it can determine the cable length and the nature of the fault. Additionally, it supports all metal cables with two or more cores, and diagnosis and length measurement are possible even when devices are connected. 【Features】 - Determine cable length and fault content with the push of a button - Measure the distance to cable breaks, short circuits, branches, and connection points - Supports all metal cables with two or more wires, including coaxial cables up to 6 km in length - Measurement possible from one side while terminal devices remain connected (e.g., motors) - Equipped with an easy-to-read LED screen with backlight *For more details, please refer to the PDF document or feel free to contact us.

The "TX6000S" is a cable diagnostic and length measurement device that can store up to 50 waveforms and measurement data in its main unit. It supports communication lines, power lines, and all metal cables, allowing for high-precision length measurement within a range of 0 to 6000m with an accuracy of ±1%. Additionally, it features a tone generator function for easy cable identification, and it can accommodate live wires up to 600VAC with a live wire adapter (sold separately). 【Features】 ■ Memory with 2 phenomena tables for comparing good and faulty lines ■ Tone generator function for convenient cable identification ■ Compatible with live wires up to 600VAC with a live wire adapter (sold separately) ■ Economical rechargeable *For more details, please refer to the PDF document or feel free to contact us.

"TX Ranger S" is a rechargeable measuring device that wirelessly transmits length measurement data, allowing for cable measurement, diagnostics, and data storage on large screens of tablets and smartphones. It is also capable of detecting faults at very close distances. Waveform analysis is used to diagnose the nature of the faults and identify their locations. Additionally, it can store waveform images and measurement data up to 50 times in the main unit, and measurements can be taken even with open, short-circuited, or connected equipment. [Features] ■ Capable of exploring distances to fine fault locations ■ Can catch signs of accidents or disconnections in robot cables ■ Able to detect faults at very close distances ■ Diagnoses the nature of faults and identifies locations through waveform analysis ■ Stores waveform images and measurement data up to 50 times in the main unit *For more details, please refer to the PDF document or feel free to contact us.

The "Wire Finder 508S" is a product that explores cables or pipes in walls, floors, and underground, identifying the wiring routes and depths before excavation or drilling. With its palm-sized compact design, it detects cable routes before drilling or excavation. Additionally, due to voltage protection, it can be used on live AC circuits. An automatic shut-off feature maximizes battery life, and a durable carrying case is included. Please feel free to contact us if you need assistance. 【Features】 ■ Identifies the desired circuit and breaker ■ Sensitivity adjustment function for accurate location identification ■ Easy operation with a single switch ■ Stored in a durable carrying case ■ Palm-sized compact design *For more details, please refer to the PDF document or feel free to contact us.

"Marker Mate" is a highly weather-resistant and durable product that can be used in various environments. It is specially designed for the detection of electronic markers and features excellent functionality that allows for the simultaneous detection of 9 types of electronic markers (power, EU power, water, sanitation, telephone, fiber optic, gas, cable TV, non-potable water/general), which have become the industry standard. Utilizing digital signal processor technology, it operates as a sophisticated high-performance marker locator under various weather conditions, instantly identifying the location of buried facilities. 【Features】 ■ Detection range for electronic markers is over a depth of 1.5m ■ Supports up to 9 types of markers tailored to the application of buried objects ■ In scan mode, automatically identifies all marker types ■ Manual function allows for adjustable detection threshold for marker signals ■ Equipped with a digital signal processor for high-precision detection *For more details, please refer to the PDF document or feel free to contact us.

The "Omni Marker II" is an electronic marker ball used to mark the buried locations of utilities such as electricity, water, sanitation facilities, telephone, non-potable water, gas, and CATV. It can be easily placed up to 1.5 meters away and emits a strong signal that can be easily detected even months or years later. The peak of the signal is directly above the marker, indicating an accurate position within a few centimeters. The material of the marker is commonly used for underground facilities and materials, and it is waterproof and resistant to acid and alkaline solvents, ensuring it does not contaminate the soil and can be used safely. [Features] - Uses industry-standard frequencies - Compatible with various electronic marker location detection devices - No batteries or moving parts that need to be replaced - Does not contain hazardous chemicals, and a material safety data sheet is not required *For more details, please refer to the PDF document or feel free to contact us.

The "RD8200SG" is a high-end model of a buried cable and pipe locator, equipped with standard features such as GPS, current direction indication, and high-output transmission. It can specifically identify only the cables you want to search for based on the direction of the flowing signal. It accurately detects only the target line by identifying the unique signal emitted from the transmitter. Additionally, we offer a variety of optional products tailored to diverse purposes. Please contact us when you need assistance. 【Features】 - Quickly identify the buried location using arrows and a compass - Search for buried objects using only the receiver measurements - Maximum usable depth is 30m - Capable of employing various search methods according to the site environment *For more details, please download the PDF or feel free to contact us.

The "PE2003-G" is a buried line leakage detection device that can detect disconnection and leakage points in buried communication and power cables. It demonstrates exceptional effectiveness in detecting disconnection points in road heaters. It can conduct accident point investigations over long distances of 1 to 2 km. Please contact us when you need assistance. 【Features】 ■ Quickly pinpoint detection of high-resistance leakage points ■ Works on various surfaces such as asphalt, grass, and concrete ■ Capable of conducting long-distance accident point investigations of 1 to 2 km ■ Easy operation with an analog meter display ■ Demonstrates exceptional effectiveness in detecting disconnection points in road heaters *For more details, please refer to the related links or feel free to contact us.

The "CS90" is a high-performance TDR cable length measuring device capable of accurate measurement and diagnosis from a zero-meter starting point. It stores settings for commonly used cables in the main unit and is equipped with a momentary disconnection detection function that retains short-term disconnection faults in the waveform. Additionally, results can be saved, shared, and printed on a PC using dedicated software. 【Features】 ■ Accuracy ±0.01%, ultra-high-performance TDR ■ Rapid and accurate measurement of cable length and fault details ■ Automatic fault point detection function accelerates inspection ■ Measurement results can be saved to a PC via SD card or USB *For more details, please download the PDF or feel free to contact us.

The "Super Piro-chan SP780" is a digital cable locator that ensures reliable detection even under strong noise conditions such as inverters, ADSL, and business phones. It accurately identifies cables and breakers from 0V unpowered lines to 600VAC live wires. It features an auto-selection function that automatically zeros out signals below the strongest signal line received. Additionally, both the transmitter and receiver are conveniently rechargeable via USB-C and utilize a lithium battery that allows for long hours of operation. 【Features】 ■ Capable of detection in completely noise-free conditions ■ Receiver mode can switch between automatic and manual, allowing for appropriate detection based on the situation ■ Detects wiring routes and terminals of live wires from 0V unpowered lines to 600VAC ■ Noise-free detection of wiring routes for business phones and breakers within distribution boards *For more details, please download the PDF or feel free to contact us.