計測ネットサービス List of Products and Services

This is a system that automatically measures the behavior of structures and slopes 24 hours a day and without human intervention using automatic targeting total stations and GNSS as sensors. By immediately processing the acquired data, it is possible to view three-dimensional displacement information on a PC monitor or remotely via the internet. If data exceeding the pre-set displacement management value (warning value) is acquired, the accompanying alarm system will automatically detect it and send an email to the registered administrator or issue a warning through a display light. As of March 2024, the NETIS number has been updated! KT-230145-A (Three-Dimensional Displacement Automatic Measurement Cloud Management System)

• 3D measuring device

This is a system that performs 3D measurements of ground and existing structures that may be affected by nearby construction only when necessary. It automatically measures all points within the range visible to the total station and acquires the result data into the system, contributing to the labor-saving of measurement tasks. The Mobile Dam System simplifies the process from the installation of the total station to the start of measurement, and also makes the operation of mobile devices simpler than before, allowing even those without specialized measurement knowledge to easily set up and measure. As of March 2024, the NETIS number has been updated! KT-230145-A (3D Displacement Automatic Measurement Cloud Management System)

• 3D measuring device
• Safety Sensors

The 3D surface measurement system "DAMSYS-Hybrid" scans the measurement monitoring area with a Leica multi-station and visualizes the results on-site. It can simultaneously acquire data from both "points" via prism reflection and "surfaces" through 3D scanning, allowing for rapid understanding of unexpected behaviors. The behavior of slopes and ground can be managed in both the "vertical direction" and the "direction perpendicular to the slope's inclination," enabling automatic detection of displacements over a 24-hour period.

• 3D measuring device

Centralized management of on-site measurement sensors! You can view everything on a single screen, eliminating the hassle of switching between different software. Additionally, the screen layout can be customized to fit your specific site needs. The renewed version will be available in March 2024. *Some systems are not supported. Customers with unsupported systems will continue to use the previous version. Thank you for your understanding. NETIS Registration KT-160109-VR

• 3D measuring device

The NETIS number has been updated! KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) *Old NETIS number: KT-130050-VE This is an automatic measurement system that manages the 3D coordinates of the position information of bridge construction girders using an automatic aiming total station and displays the differences from the planned height. With real-time automatic measurement, there is no need to interrupt work for measurements. Displacement data measured can be viewed from a PC in the site office or from remote terminals via a web browser (K-Cloud).

• 3D measuring device
• Distance measuring device
• Other information systems

―Introduction to the Option System― 【On July 12, 2024, the MR visualization system for the option system has resumed sales!】 This system uses the technology of "GyroEye" developed by Informatics Co., Ltd. to project an area set with a "3D barrier" as a hologram in real size into the real world. 【Supported Devices】 Microsoft HoloLens 2, Trimble XR10 【Supported Data Formats】 DWG, DXF, IFC * To use this option system, registration for the dedicated app "GyroEye Web Data Converter" to convert CAD data into MR data is required. * The 3D barrier and the WEB Data Converter have different coordinate systems, so they do not match perfectly. * There may be instances where it does not operate correctly due to weather conditions. * Depending on the site environment and weather conditions, it may not be possible to achieve high-precision projection. * GyroEye is a registered trademark of Informatics Co., Ltd. * For more details on the MR visualization system, please refer to the catalog.

• Safety Sensors
• Safety Controller
• Area Sensor

"Pile Navi Cloud-V" is a system that enables high-precision pile driving construction while confirming the position and inclination of piles using a non-prism total station. When displaying the differences between design values and measured values in both numerical and visual formats, it can be checked on an in-vehicle monitor or a remote web browser (K-Cloud). Information such as the amount of deviation from the start to the end of measurement is automatically saved. It can be implemented according to site needs, such as with three-point heavy machinery or all-casing methods. 【Features】 ■ NETIS registered (Number: KT-220168-A) ■ Compatible with precast piles and cast-in-place piles ■ Improved accuracy and safety through system management *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• 3D measuring device

Using GNSS (GPS/GLONASS), we measure the position information of the pile center in real-time and visually display the positional relationship to the designed pile center coordinates on an onboard monitor. This is a support system for operating cranes and three-point heavy machinery during pile driving construction in ground improvement, enhancing accuracy and work efficiency. It manages the locations for driving piles in precast pile installation and ground improvement work. NETIS Registration KT-220168-A Patent: No. 6214282

• 3D measuring device

Using a non-prism total station, we measure the position of the sheet piles and visually display the entrance and exit of the normals and their inclination based on the measured values. This system allows the heavy machinery operator to make adjustments while checking the entrance and exit of the normals in front of and behind the sheet piles on the monitor in the cockpit. <NETIS Registration: KT-220168-A>

• 3D measuring device
• Other information systems

The wireless subsidence sensor [Wimos] uses a wireless light-receiving sensor and a rotating laser level to measure subsidence and uplift in real-time. It can be used without specialized knowledge as there are no complicated operations. NETIS Registration KT-180034-VE 【Features】 ■ Communication speed: Measures 5 sensors in 1 second ■ Resolution: 0.1mm ■ Reception width: Wireless light-receiving sensor approximately 100mm, long light-receiving sensor: approximately 300mm ■ Retains wireless communication setting functions with each terminal ■ Graph display function, data can be saved in CSV format ■ Battery or AC power supply ■ Alerts via email or rotating light when management values are exceeded (optional) *For more details, please download the catalog or contact us.

• Distance measuring device

It is a safety monitoring system that creates a shield by scanning a surface with laser light from a laser scanning sensor, detecting intruding objects, and issuing alarms. <NETIS Registration KT-190131-A>

• Distance measuring device

This is a system that installs an inclination sensor to observe the inclination displacement of vents, sandbags, bridge piers, bridge abutments, and slopes at bridge construction sites. Data is collected wirelessly and displayed in a web browser. In high-urgency sites, continuous inclination measurement helps ensure safety. By connecting to a power source, it operates continuously, allowing measurement instructions and configuration changes to be made from a remote computer at any time. NETIS: KT-170096-A

• Other measurement, recording and measuring instruments
• Data Logger

This system allows for surface measurements using a scanner instead of traditional pinpoint measurements with non-prisms or prisms, providing more detailed results on-site. It manages the measurement area as a surface and visualizes mesh displacement using colors. When pouring concrete in the superstructure of a bridge, it confirms the flatness of the pouring surface. It is also possible to display the height differences from the design surface. The measured data can be directly utilized as construction results. NETIS Registration: KT-180118-A

• 3D measuring device

This is a system that collaborates with construction management devices to guide the position of piles, visualize and record improvement bodies and construction information. By collecting various construction information in the cloud and sharing it over the internet, it contributes to the management of ground improvement and pile construction, quality enhancement, and the efficiency of report creation. The acquired data is displayed in 3D on a web browser (K-Cloud). *Note: Some construction management devices may not be compatible. NETIS Registration KT-170030-VE Screen provided by Ando & Associates Co., Ltd. Site: Wonogiri Dam sediment control construction

• 3D measuring device
• Other information systems

In July 2024, we obtained a NETIS number. NETIS number: KK-240034-A This is a system that uses a total station and reflective sheets to perform three-dimensional measurements of the differences from the design data, necessary for confirming the dimensions of components and assembly accuracy in the manufacturing and assembly processes of bridge and shipbuilding materials. It allows for precision management aligned with the design coordinate system, regardless of the installed position or orientation of the manufactured components.

• 3D measuring device

By measuring the distance to the girder with a laser distance meter during the passage of trains or vehicles, the deflection amount is calculated and output. Measurements can be taken at the target measurement points without cables and in a non-contact manner. This significantly improves efficiency compared to traditional contact-type displacement gauges.

• Distance measuring device

"3D-Field" is a three-dimensional surveying system that displays data in 3D and enables intuitive surveying operations by linking real-world movements with movements within the device. It can create existing structures and also convert BIM and CIM data into 3D. By using an automatic tracking total station, basic surveying tasks such as "positioning" and "surface management with TIN" can be performed by a single person. 【Features】 ■ One-man surveying ■ Freely create sites with 3D data ■ Surface management with TIN ■ Compatible with a wide range of surveying instruments *For more details, please refer to the PDF materials or feel free to contact us.

• 3D measuring device

This is a system that automatically measures slope inclination displacement using a non-contact laser distance meter. It replaces traditional extensometers with laser distance meters to monitor landslides. While maintaining measurement accuracy, it aims to enhance the efficiency and sophistication of safety management. The acquired data can be checked remotely at any time via a web browser (K-Cloud).

• Distance measuring device

The system name has been changed from "Recos Cloud (Internal Displacement)" to "S Point." This is a system that automatically measures distance displacement using a non-contact laser distance meter. It contributes to safety management by continuously measuring displacements during tunnel construction, the impact of nearby construction, and during the installation of bridge girders. The acquired data can be checked remotely at any time via a web browser (K-Cloud renewed version).

• Distance measuring device

Before pavement construction, such as cutting overlays and repaving, the current condition survey is conducted safely and accurately without traffic restrictions from sidewalks and shoulders. The previous "ROPO" has been upgraded to 3D measurement. Using non-print functions, the shapes in each work type are managed in three-dimensional coordinates. Patent: No. 4059832

• 3D measuring device

This is a system that supports the improvement of construction accuracy and the reduction of finishing work in concrete placement. By attaching a 360° prism to tools such as leveling instruments, trowels, and measuring poles, three-dimensional coordinates are obtained using an automatic tracking total station. It allows for real-time height calculations and enables work to be performed while checking the differences from the design values. Measurement screens can also be viewed on smart glasses during the process. NETIS Registration KT-180117-VE This measurement system was jointly developed with Dai Nippon Civil Engineering Co., Ltd.

• 3D measuring device

This is a system that allows measurement and surveying work for steel frame construction, traditionally done using a transit at construction sites, to be performed by one person using a total station and a mobile PC. You can also check the measurement results on the cloud, making it useful for understanding the current situation from locations other than the measurement site, such as the site office. Registered with NETIS in September 2023! <NETIS Registration: KT-230113-A>

• 3D measuring device

This is a system that monitors the elevation of the track in real-time using a liquid injection method during track repair work. It displays displacement data in real-time via wireless communication (cable-free). Since it measures the height of the rails without interrupting the liquid injection work, it helps in the precise adjustment of the liquid injection amount and in preventing abnormal elevations. This measurement system was jointly developed with East Japan Railway Company.

• 3D measuring device

In March 2024, we registered with NETIS. KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) This system safely and efficiently monitors the regular displacement status of tracks using an automatic total station. After the prism is installed, it is generally unnecessary to enter the track, and the track measurement is conducted semi-automatically.

• 3D measuring device

In March 2024, NETIS registration was completed. KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) This system measures the displacement of tracks affected by nearby construction using an automatic tracking total station in three dimensions. It can monitor not only the tracks but the entire construction area in real-time, 24 hours a day.

• Other process controls
• 3D measuring device

Using the control PC, encoder, and camera mounted on the track inspection vehicle, data such as "obstacles," "obstruction points," "alignment information," and "video" corresponding to kilometer information is saved to the control PC. With the saved video and kilometer information, the above data can be registered and rechecked even in offices outside the site. Patent: No. 6744840

• 3D measuring device

This is a system that calculates and displays/records the advance amount and displacement of special switches by surveying the elements that make up the special switch (crossing points, stakes, U-shaped rails, movable rails, slip rails, and basic rails) using an LN-100 and a 360° prism. Compatible special switches: Movable DC (Movable Diamond Crossing) SSS (Single Slip Switch) DSS (Double Slip Switch) This system was jointly developed with East Japan Railway Company. Patent pending.

• 3D measuring device

You can monitor the conditions of construction sites in remote locations 24 hours a day using NW camera footage. The status of the prisms at measurement points can also be monitored, allowing you to understand situations where measurements are not possible due to dirt on the prisms, heavy rain, snowfall, or obstructions.

• 3D measuring device

In construction and demolition sites, efforts are made to prevent noise and vibration caused by construction as much as possible, regulated and guided by the Basic Law for Pollution Control, the Noise Regulation Law, the Vibration Regulation Law, and various local ordinances. This is a system that visualizes the vibrations and noise generated at construction sites. It can be used to promote understanding among local residents and to raise awareness and caution among on-site workers. Both rental and sales options are available.

• Vibration Testing
• Noise Inspection
• Vibration Inspection

This is a system that acquires the WBGT index, temperature, and humidity in real-time and displays them on a web browser (K-Cloud renewed version). The collected data is stored on the web, allowing for easy creation of reports and graphs, which can be utilized in documentation and reports. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other security and surveillance systems

This is a system and display panel that measures and displays temperature, humidity, atmospheric pressure, wind direction, wind speed, and rainfall. - Signage to be installed on-site - Remote viewing using a web browser - Standalone operation We will propose specifications tailored to the customer's site conditions. It can be useful for preventing heat-related illnesses in summer, making judgments about work interruptions due to strong winds or heavy rain, and managing work processes for the following day, contributing to safety on site.

• 3D measuring device

This is a system that uses the automatic tracking function of a total station and a 360° prism to perform positioning, excavation, and installation guidance of structures (such as U-shaped drains, L-shaped gutters, and pedestrian and vehicle block paving) without the need for string lines. Its simple configuration allows for use in various measurement applications on different sites. In exterior construction work, it enables easy confirmation of gradients and design heights. For exterior construction projects like parking lots, it allows for the creation of TINs that consider water gradients, making it simple to check heights at any desired location. Additionally, the elimination of string lines improves the efficiency of subgrade and base work and enhances construction quality. NETIS: KT-160072-VR This system was jointly developed with Taisei Rotec Co., Ltd. and Chiyoda Soki Co., Ltd. Patent number: No. 6420734

• 3D measuring device