榮製機 List of Products and Services

The "PV-10" is a vice that can clamp extremely small workpieces (approximately 5mm) with high precision. It is about half the size of a typical precision small vice and weighs only 70g, allowing for the installation of up to about twice the number of units in the same area without worrying about the weight limit of the pallet changer. As a result, it significantly improves the work efficiency and operating rate of high-speed micro-machining machines and is suitable for replacing vices that are disproportionately sized for the workpieces. 【Features】 ■ Compatible with extremely small workpieces (approximately 5mm) such as smartphones and micro connectors ■ Suitable for workpiece clamping in fine machining, such as die-sinking electrical discharge machines and high-speed micro-machining machines ■ The bottom surface and one side of the main body have tapped holes (M3), allowing for jig mounting *For more details, please refer to the PDF document or feel free to contact us.

By using the "Wire Cut Jig" for wire cut electrical discharge machines from Eiseiki Co., Ltd., you can reduce the workpiece setup time and lower material costs (for workpiece clamping). Additionally, a wide range of jigs suitable for various workpiece shapes such as round, square, and cylindrical forms are available. The key point is that even newcomers or those responsible for other machines can easily set up workpieces. 【Do you have these concerns?】 ■ It's difficult to adjust horizontally, taking over 30 minutes for setup... ■ Extra material costs due to clamping... ■ I want to make fine adjustments in microns... and more. *For more details, please refer to the PDF document or feel free to contact us.

At Eiseiki, we are producing high-precision jigs (such as precision vises and jigs for wire cutting) necessary for mold manufacturing in collaboration with our mold business. This catalog is a comprehensive catalog introducing 31 types of precision jigs. It includes a variety of items such as those for wire cutting electrical discharge machining, precision grinding, and vertical-horizontal combined indexing devices for milling. 【Contents (excerpt)】 ■ Precision Vise ■ Samber Type Permanent Magnet Chuck ■ Precision V Block ■ Dresser ■ Grinding Sound Detector ■ Tooldex / Punchdex ■ Rotary Chuck ■ Mildex ■ Wire Cutting Vise, Palette, Clamp ■ Finger Holder / Base Holder and more *For more details, please contact us or download the PDF.

This is a new product from the wire cut jig series. It is a wire cut vice that reduces the hassle of setting up workpieces when performing fine processing in industries such as connectors. ------------------------------------------------------------------------- ■ Fine Adjustment Wire Cut Micro Vice → A horizontal screw type vice with horizontal and swivel adjustment functions, ideal for holding extremely small workpieces. ■ Fine Adjustment Wire Cut Vice → A horizontal screw type vice with horizontal and swivel adjustment functions, advantageous for processing with a large protrusion. And more. ------------------------------------------------------------------------- *For more details, please download the catalog or contact us directly.

The "WPV-60AJ" micro vice for wire cut electrical discharge machining provided by Eiseiki Co., Ltd. "NEOTEC Division" is a wire cut vice that reduces the hassle of work setup when performing fine processing in industries such as connectors. The manufacturer's standard price is an affordable 250,000 yen, and it has received great acclaim with the launch of the new product! *For more details, please download the catalog or contact us directly.

The "Base Holder" is a product made of martensitic stainless steel for wire cut electrical discharge machining. It can be used reversibly for zero line processing of the work table and for preventing interference with the machine's lower nozzle. 【Features】 ■ Usable for zero line processing of the work table and for preventing interference with the machine's lower nozzle ■ Can be used in conjunction with wire cut bridges *For more details, please refer to the PDF document or feel free to contact us.

The "WST Series" is a wire cut system tooling made from fully hardened martensitic stainless steel, finished with precision grinding. It is used by attaching a leveling base to the work stand of a wire cut electrical discharge machine, and then fitting fine vises, V-blocks, or pallet holders according to the shape of the workpiece. 【Features】 - Made from fully hardened martensitic stainless steel and finished with precision grinding. - Can be used by attaching fine vises and other tools according to the shape of the workpiece. - The attachment of pallet holders and other tools can be easily done using the positioning pins on the leveling base. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our wire-cut bridge for wire-cut electrical discharge machining, the 'WUB Series'. This series allows for easy horizontal centering of the workpiece thanks to the adoption of special spherical bearings, significantly reducing setup time and improving machine operating rates. Additionally, it features a swivel adjustment function. 【Features】 ■ Easy horizontal centering ■ Significant reduction in setup time ■ Swivel adjustment function ■ By combining special accessories, various workpieces can be efficiently set up ■ Made from martensitic stainless steel (hardened and ground finish) ■ Excellent rust resistance *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our wire-cut bridge for wire-cut electrical discharge machining, the 'AWB Series/WB Series.' This series allows for stable machining as it can process workpieces at the center of the machine. It minimizes the material required for the clamping of workpieces, thereby reducing material costs. The material used is martensitic stainless steel. 【Features】 <AWB Series> ■ Equipped with horizontal adjustment function Made to order Allows for higher precision setup <WB Series> ・ Made to order ・ Available for sale individually *For more details, please refer to the PDF document or feel free to contact us.

The "WP Series" is a micro-adjustable wire cut pallet for wire cut electrical discharge machining, available in two types: right-hand and left-hand. Additionally, we offer wire cut vises that make work set-up easy, as well as micro-adjustable wire cut vises that are resistant to rust. 【Product Lineup】 ■ WP-160AJR (Right-hand) ■ WP-160AJL (Left-hand) *For more details, please refer to the PDF document or feel free to contact us.

The "WPV Series" is a wire cutting vise that is easy to set up and equipped with a removable lower stopper. This series can be used from both the left and right sides. It is made of martensitic stainless steel. 【Features】 ■ Easy workpiece setup ■ Equipped with a removable lower stopper ■ Made of martensitic stainless steel *For more details, please refer to the PDF document or feel free to contact us.

The "WPV Series" is a wire-cut vice made from martensitic stainless steel, featuring precision grinding after front hardening (HRC 56°) and is resistant to rust. The lineup includes the "WPV-150AJN," which has built-in horizontal and swivel adjustment functions. The clamping force and rigidity of the adjustment parts have been improved compared to previous models. Additionally, we offer the "WPV-60AJ" and "WPV-100AJ," which are suitable for holding extremely small workpieces. 【Features】 ■ Made from martensitic stainless steel ■ Precision ground after front hardening (HRC 56°) ■ Rust-resistant *For more details, please refer to the PDF document or feel free to contact us.

The "FH Series" is a clamping fixture for wire electrical discharge machining that can clamp a variety of workpieces, including square, round, large, and small shapes. It contributes to increased efficiency in wire cutting processing by providing suitable clamping fixtures that help reduce setup time. The lineup includes finger holders "FH-170CA" and "FH-170FA," which come with adjustment features to enable leveling of the workpiece. (The tilt of the workpiece can be adjusted in the front-back direction.) They can be purchased individually. 【Features】 ■ Capable of clamping a variety of workpieces, including square, round, large, and small shapes. ■ "FH-170CA" and "FH-170FA" are adjustable in the front-back direction. *For more details, please refer to the PDF document or feel free to contact us.

The "Stainless Steel Screw Jack Set" is a product that can hold workpieces during inspections with wire cutting machines, electrical discharge machines, three-dimensional measuring machines, and more. Additionally, we also offer a "Base Holder" for use with wire cutting electrical discharge machining, which can be used in conjunction with a wire cutting bridge. [Applications] ■ Workpiece holding for wire cutting machines ■ Workpiece holding for electrical discharge machines ■ Workpiece holding for three-dimensional measuring machines ■ Workpiece holding for other inspections *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Stainless Steel Wire Cut Clamp." 【Features】 The "Stainless Steel Wire Cut Clamp" is a product that experiences minimal deformation during tightening due to heat treatment. The lineup includes the "K-75," which can be used on both the left and right sides. There are two types available: a total length of 75mm and 55mm. Additionally, there is a model for M6 (Model: K-34, total length 34mm). *For more details, please refer to the PDF document or feel free to contact us.

This document is the instruction manual for the wire cut electrical discharge machining product 'Base Holder BH-100' manufactured and sold by Eiseiki Co., Ltd. [Contents] ■ Example of work stand installation ■ Example of work attachment ■ Example of base holder usage *For more details, please refer to the PDF document or feel free to contact us.