大阪硝子工業 List of Products and Services

The formation of TiO2 thin films using screen printing methods has become possible. By controlling the film thickness at the nano level, the coloration due to interference effects of light is achieved. Additionally, there are self-cleaning and antibacterial effects. Moreover, compared to vapor deposition, it allows for cost-effective film formation in small batches with short lead times. 【Features】 ■ A transparent reflective film can be formed by printing and firing. ■ Metallic logos, patterns, and designs can be created. ■ Colors change depending on film thickness and viewing angle. ■ A robust film quality is achieved. ■ Excellent chemical resistance and weather resistance. *For more details, please refer to the PDF document or feel free to contact us.

Laminated glass refers to glass that is bonded together with PVB or EVA as an interlayer between multiple sheets of glass. It excels in impact resistance and also has a shatterproof function. The characteristics of PVB film offer higher transparency compared to EVA film, while EVA film is more water-resistant than PVB film. Therefore, we can recommend which interlayer is more suitable depending on the application. 【Features】 ■ Bonding multiple sheets of glass with PVB or EVA as an interlayer ■ Excellent impact resistance ■ Shatterproof function *For more details, please refer to the PDF document or feel free to contact us.

At Osaka Glass Industry, we manufacture glass with conductive properties by printing silver paste and soldering copper wires onto it. By applying electricity to this glass, it generates heat, allowing it to be used as glass with anti-fogging functionality. 【Features】 ■ Ag paste printing ■ Copper wire included ■ Soldered ■ Reasonable price *For more details, please refer to the PDF document or feel free to contact us.

By simultaneously bending two pieces of curved glass, we finish them with the same shape of R processing. By combining the two pieces of glass, we finish it as a single piece of glass. 【Features】 ■ Simultaneous bending of two pieces of curved glass ■ R processing with the same shape ■ Finished as a single piece of glass *For more details, please refer to the PDF document or feel free to contact us.

The cover glass for solar cells is a type of plate glass with high transmittance and low reflection functionality. Our company processes this glass through strengthening and printing, and it is used not only as cover glass for solar cells but also as cover glass for lighting. 【Products Offered】 ■ Solar cell cover glass (with embossing) *For more details, please refer to the PDF document or feel free to contact us.

We can print on the glass surface with the specified film thickness. In addition to ceramic paints, we use resin-based paints. We will conduct various condition tests for the printing process. Depending on the type of glass substrate, it may not be possible to achieve thick film formation through ceramic printing, so please inform us of the materials you will be using in advance. For soda glass and aluminosilicate glass, thick film processing with ceramic paint can be done without any issues. 【Features】 ■ Printing is possible with the specified film thickness ■ In addition to ceramic paints, resin-based paints are used ■ Various condition tests are conducted for printing processing *For more details, please refer to the PDF materials or feel free to contact us.

We offer eco-glass sales, made possible by our glass factory, at a low price that includes installation costs. By applying with us, you will benefit from the following advantages: ■ Significant reduction in intermediary margins and logistics costs compared to having glass sashes installed by glass shops or construction companies, allowing us to pass those savings on to our customers. ■ The glass installation will be carried out by professionals who are accustomed to handling glass, ensuring a speedy replacement. ■ In the event of damage after the replacement, we provide a compensation guarantee of up to 300,000 yen. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of "tempered glass" handled by Osaka Glass Industry Co., Ltd. Our company has produced tempered glass in the same shape based on the actual glass. Instead of using data from drawings, we created the same shape of glass based on the irregular glass with holes sent by the customer and performed the tempering process. In addition, we also produce tempered glass by processing glass into a C shape. If you have any issues regarding glass, please feel free to contact us. 【Case Study】 <Production of tempered glass in the same shape based on actual glass> ■ Produced glass in the same shape based on irregular glass with holes and performed tempering. ■ Even without drawings, if you provide the actual glass or a traced paper of the glass, we can produce the same glass. *For more details, please refer to the PDF document or feel free to contact us.

Our company specializes in a glass processing technology called "yellow-colored glass processing." This processing is a jointly developed product with the Osaka City Industrial Research Institute. By printing paint on the glass surface and firing it at high temperatures, the glass surface is colored yellow with transparency. It is used in the Kansai International Airport connecting bridge, tunnel lights in various locations, and also in underwater goggles. 【Features】 ■ Paint is printed on the glass surface ■ The glass surface is colored yellow with transparency ■ Proven track record of use in the Kansai International Airport connecting bridge and tunnel lights, etc. *For more details, please refer to the PDF document or feel free to contact us.

At Osaka Glass Industry, we have newly established in-house facilities capable of "glass tube strengthening processing" to enhance the strength of tubular glass! This was developed in response to requests for "omnidirectional visibility." We can apply strengthening processing to short glass tubes that do not exceed 100mm in length, and processing is possible from just one piece. (Traditionally, glass tube strengthening required a length of over 100mm and a certain number of pieces.) We can accommodate glass tubes up to approximately 300mm in length, with a minimum diameter of 120φ to a maximum diameter of 300φ. Additionally, we may be able to process tubes outside the 120-300φ range, so please feel free to contact us first. 【Features】 - Orders accepted from small lots - Improved pressure resistance and thermal shock characteristics - Usable for explosion-proof and lighting cover glass *For more details, please feel free to contact us.

Ceramic printing is a process where ceramic paint is printed on glass in a pattern according to the customer's specifications and then finished by heating and firing. After printing, the paint on the glass surface is dried, and the glass is heated to a high temperature near its softening point, causing the glass frit and pigments in the printed paint to fuse together, resulting in a strong printed film that does not peel off. 【Features】 ■ Heat resistance ■ Abrasion resistance ■ Chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

Resin printing is a process where resin-based paint is printed on glass in a pattern according to the customer's request and then fired to complete the printed glass. After printing, the glass surface is fired, resulting in a finish that, while not as durable as ceramic printing, has a very glossy appearance. 【Features】 ■ Capable of forming a printed film on the glass surface ■ Glossy printed products *For more details, please refer to the PDF document or feel free to contact us.

For glass with a thickness of 3t or more (the thicker the glass, the better), wind-cooled tempered glass is significantly stronger than chemically strengthened glass, and it can also be strengthened in a considerably shorter processing time compared to chemically strengthened products. We offer dome glass with excellent cost performance. 【Features】 ■ Strengthening processing of dome glass for explosion-proof cameras and lighting covers ■ Strengthening with shortened processing time ■ Excellent cost performance *For more details, please refer to the PDF document or feel free to contact us.

To manufacture bent glass tailored to customer specifications, we create molds that match each specification, set the glass sheet on the finished mold, and then place it in the furnace. After entering the furnace, the glass is heated to near its softening temperature, allowing it to bend along the mold due to its own weight. The shaped glass undergoes slow cooling inside the furnace to eliminate any internal stress that occurred during the bending process. 【Features】 ■ Molds are created to match each specification ■ Eliminates internal stress in the glass that occurs during bending ■ No residual stress remains in the product, allowing for cutting after bending ■ Simultaneous multiple bending is possible, enabling the production of laminated glass or insulating glass (double glazing) in subsequent processes *For more details, please refer to the PDF document or feel free to contact us.

Our company specializes in glass processing technology known as "tempered glass processing." We process tempered glass for various applications, including microwave and gas stove door glass, pressure vessel viewing windows, and underwater goggles. We offer high-quality products at factory direct prices. 【Features】 ■ Strengthened processing of glass for various applications ■ High-quality products offered at low prices directly from the factory *For more details, please refer to the PDF document or feel free to contact us.

Our company specializes in glass processing technology known as "glass bending processing." To manufacture products tailored to our customers' requests, we create molds that match each specification, set the plate glass on the finished mold, and then place it in the furnace. The products manufactured by our company are widely used in convenience store warming cases and doll cases, among others. Additionally, we can perform simultaneous multiple bending, allowing for the production of laminated glass or double glazing (pair glass) in subsequent processes. 【Features】 ■ Custom molds made to fit each specification ■ Proven track record in applications such as cover glass for doll cases and warming equipment for convenience stores ■ Capability to produce laminated glass or double glazing (pair glass) in subsequent processes *For more details, please refer to the PDF document or feel free to contact us.

Our company specializes in glass processing technology known as "frosted glass (frosted glass printing)." It is possible to print a milky white pattern on the glass surface using ceramic printing. Since the glass is fired near its softening temperature during the printing and firing process, the durable printed film, which slightly penetrates into the glass, provides light diffusion functionality similar to frosted glass and sandblasted glass, making it suitable for use as lighting cover glass. 【Features】 ■ Milky white patterns printed on the glass surface ■ Material that does not intentionally roughen the surface even when the glass surface is dirty ■ Dirt can be easily removed by lightly wiping ■ Fired near the glass softening temperature during the printing and firing process ■ Has a durable printed film *For more details, please refer to the PDF document or feel free to contact us.

Our company offers a glass processing technology called "UV-cut film coating." "UV-cut glass (insect-repellent glass)" is coated with an organic paint that absorbs ultraviolet (UV) rays on the surface of the glass. This product is colorless and transparent glass that cuts 100% of ultraviolet rays below 385nm while maintaining the glass's transparency. [Features] - Cuts 100% of ultraviolet rays below 385nm while maintaining glass transparency - Colorless and transparent glass - Effect lasts for 10 to 15 years *For more details, please refer to the PDF document or feel free to contact us.