根本企画工業 List of Products and Services

While the Earth's environment is changing and global warming is progressing, heavy snowfall in winter is disrupting living conditions. The installation of snow melting systems addresses issues related to snow accumulation and freezing, contributing to the creation of an environment free from snow removal, falling snow, and slip accidents. Sect heaters have very high mechanical strength, excellent durability, good thermal conductivity, and are energy-efficient, making them an economical product in the long term. Sect heaters can be designed to meet customer needs, including embedded heater units, panel-type heater units, and cylindrical or semicircular heaters tailored to the shape of the objects for snow melting and freeze prevention. *For more details, examples of installations are included in the catalog list. Please feel free to contact us.*

• Other heaters

This product is a prototype development of a three-dimensional seismic isolation device that accommodates vertical seismic isolation in addition to conventional seismic isolation devices. Equipped with newly developed support mechanisms for both horizontal and vertical directions, it significantly reduces seismic motion compared to conventional devices. In evaluation tests at one of the largest vibration testing facilities in the country, it demonstrated excellent performance by blocking vibrations that were 1.5 times stronger than actual earthquakes. 【Features】 - Composed of a two-axis horizontal seismic isolation mechanism and a vertical seismic isolation mechanism. - The two-axis horizontal seismic isolation mechanism features floating pads that perform minimal levitation on a precisely machined base over 2 meters on each side, blocking horizontal displacement. - The vertical seismic isolation mechanism blocks vertical displacement through a large spring and a special linkage mechanism. - The parallel arrangement of the linkage mechanisms allows it to accommodate large, slow vertical vibrations. - Manufactured using various technologies such as large-scale machining, coil springs, and precision assembly, it is capable of producing not only seismic isolation devices but also various experimental and development equipment. *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "2-axis testing machine" is a load testing machine that can simultaneously apply horizontal and vertical loads. By using a hydraulic actuator with precision control functions, it measures friction forces and the vibration characteristics in horizontal and vertical directions. The test specimen is placed on a horizontal sliding table, and by applying load with a vertical loading mechanism while driving the horizontal sliding table, it is possible to verify the friction, rebound force, and stiffness of the test specimen. 【Features】 ■ Composed of a horizontal sliding table and a vertical loading mechanism ■ Capable of evaluating various mechanisms and devices such as anti-vibration rubber, fluid bearings, and pneumatic cylinders ■ Manufactured using various techniques such as strength analysis, can fabrication, precision assembly, etc. ■ Capable of producing various measuring devices, not limited to this type of testing machine *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

We handle "press-in equipment" for pressing bushes into products. This product uses double-rod hydraulic cylinders, allowing for stroke management with a stopper. Additionally, since it uses a light curtain, the safety of the operator is ensured. 【Features】 ■ The product setup is performed by the operator. ■ The use of a light curtain ensures the safety of the operator. ■ The use of double-rod hydraulic cylinders allows for stroke management with a stopper. ■ Servo press is also possible. *For more details, please refer to the PDF materials or feel free to contact us.

• Hydraulic Equipment

We provide an "Automatic Press-Fitting Assembly Line" that can automatically perform processes such as press-fitting automotive parts and inspection on a single line. In addition to press-fitting, it is also possible to include a "screw tightening" process using a nut runner. Furthermore, the products to be press-fitted are set by operators at a location away from the press-fitting machine and are automatically transported to the press-fitting machine. 【Features】 ■ Uses servo motors for shuttle transport ■ Products to be press-fitted are set by operators away from the press-fitting machine and are automatically transported to the press-fitting machine ■ Conducts inspection → press-fitting → assembly *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment

We provide an "automatic inspection device" for testing products equipped with a rotating arm and sensors that detect the movement of that arm, which determines whether the sensors are functioning normally in response to the arm's movements. The arm is operated by a servo motor, and the amount of movement is managed by an encoder. Additionally, by changing the stages of the pressing and setting jigs, it is possible to conduct inspections of various types, and the use of a light curtain ensures the safety of the operators. 【Features】 ■ The arm is operated by a servo motor, and the amount of movement is managed by an encoder. ■ By changing the stages of the pressing and setting jigs, inspections of various types can be conducted. ■ The setup of products is performed by the operator. ■ The use of a light curtain ensures the safety of the operators. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Are you having trouble with snow shoveling or snow removal in the winter? Since you never know when it will snow, it's difficult to arrange for a contractor in advance, and we understand that this can be a concern for our customers. How about our "SECT Heater"? Since it is electric heating, it can be automatically controlled using a snowfall sensor. Please take this opportunity to contact us! 【Features】 Durability and good thermal conductivity with the Sect steel pipe heating element. Simple structure of the heater unit. Uniform heating through electric heating method. Automatic control with the installation of a snowfall sensor. Reduction of concrete excavation area during renovations, etc. We will propose a design and operation method with a heating capacity suitable for the weather conditions of the installation area. Please feel free to consult with us.

• Other heaters

Welcome to the "SECT Heater" site. Our heaters, with over 40 years of proven performance, are electric heaters that enable energy-saving and highly efficient operation, effective for snow melting and freeze prevention in cold and heavy snowfall areas. Since they use electric heating, they provide uniform heating regardless of the length of the heater installation, and it is possible to vary the supply voltage of the dedicated converter according to weather conditions. *Fun Fact: There seem to be some municipalities where auxiliary systems for snow damage countermeasures can be utilized. 【Features】 ■ High mechanical strength and semi-permanent lifespan ■ Easy to repair ■ Inexpensive electrical work ■ Uniform heating and weather condition compatibility ■ Energy-saving and economical *Please feel free to contact us.

• Other heaters

The device "NEMONAVI" was developed in response to the request for an easy way to measure the bends in pipes buried during anchor construction and ground improvement. It can also easily conduct surveys of buried pipes (such as water, communication, electricity, and gas). "NEMONAVI" measures the degree of bending in the pipe through a sensor with a built-in gyro, displaying the results in graph form on a computer. 【Features】 ◎ For a measurement of a 50m pipe, it takes about 20 minutes from the start of measurement to the display of results. The compact device has minimal impact on construction. ■ Available for rental from one day to long-term (demonstrations can be discussed) ■ Capable of measuring small diameter pipes (sensor unit outer diameter: φ39mm) ■ With a built-in gyro and cable-free operation (data transmission and power supply), it is easy to wind the sending wire and is not affected by noise during measurement ■ Displays the condition of the pipeline on the PC screen in real-time ■ The insertion and retrieval speed of the sensor unit is adjustable ■ Measurements can be conducted by one operator and one assistant ■ Registered with NETIS (No.KTK-160006-A)

• Other measurement, recording and measuring instruments

The "SECT Heater" is a system that heats the SECT steel pipe by passing electricity through the SECT cable protected by the steel pipe. It is energy-efficient and economical. It also supports automatic operation equipment with a snow sensor. We design and install snow melting devices and freeze prevention equipment that match the weather conditions of the installation site. We present examples of snow melting devices using panel-type heaters and aluminum panel-type heaters! This document introduces various examples of snow melting and freeze prevention devices, including the "road surface snow melting device" using embedded road heaters, "steel structure snow melting devices," and "equipment snow melting devices," along with photographs. [Contents] ■ Road surface snow melting device ■ Steel structure snow melting device ■ Equipment snow melting device ■ Inspection passage snow melting device ■ Road surface panel heater ■ Rubber mat heater

• others

The Top Mall Method (Small Diameter Boring Method) is a non-excavation construction method for the installation of buried pipelines using a drill boring machine. It is suitable for construction in locations where excavation is difficult, such as national roads and railway tracks, and is a clean and simple boring method that does not generate excavated soil due to its non-excavation nature. Additionally, it is equipped with a directional correction boring method. 【Features】 ■ Boring direction correction function: Curved boring is possible (Type M primarily focuses on straight boring) ■ Detection of the leading drill head: Can recognize angles and other parameters, ensuring high safety and reliability ■ Compaction method: No ground subsidence occurs due to the non-excavation method ■ Short construction period: Approximately 30m to 50m per day per location, depending on soil type, pipe size, and working environment ■ Daytime construction is possible due to minimal traffic disruption ■ Environmentally friendly clean method that does not produce industrial waste as excavation is unnecessary *For more details, please download the PDF or contact us.

• others

Kembon Kikai Kogyo Co., Ltd. is a company engaged in the design and construction of energy-saving and high-efficiency snow melting and freeze prevention equipment. We introduce examples of snow melting systems using panel heaters and aluminum panel heaters! This document presents construction examples of snow melting and freeze prevention devices, including the "road surface snow melting system" using embedded road heaters, as well as "steel structure snow melting systems" and "equipment snow melting systems," accompanied by photographs. [Contents] ■ Road surface snow melting system ■ Steel structure snow melting system ■ Equipment snow melting system ■ Inspection pathway snow melting system ■ Road surface panel heater ■ Rubber mat heater

• others

"NEMONAVI" is a device that can measure the straightness and position of pipelines by passing a sensor unit through them. It is mainly used for measuring the straightness of outer pipes inserted and buried underground during anchor construction, as well as for measuring the position of rods in free boring methods directly beneath buried objects. 【Features】 ◎ The measurement can be completed in about 20 minutes from the start to displaying the trajectory on a PC screen, so it does not hinder the progress of construction. ■ Available for rental from one day ■ Capable of measuring small diameter pipes (sensor unit outer diameter: φ39mm) ■ Built-in gyro and cable-free (data transfer and power supply secured), making it easy to wind the sending wire and unaffected by noise during measurement ■ Displays the condition of the pipeline on a PC screen with trajectory in real-time ■ Insertion and retraction speed of the sensor unit can be adjusted as desired ■ Measurement can be performed by one operator and one assistant ■ NETIS registered (No. KTK-160006-VE) * For more details, please refer to the PDF materials or feel free to contact us. ~ If you would like a demonstration (free of charge), please contact us or download the catalog! ~ * For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The "SECT Heater" is an electric heater that operates with low power consumption and high efficiency, making it effective for snow melting and freeze prevention in cold regions. Since the heating element is made of steel pipes, it has high mechanical strength and is not affected by cracks in the concrete. As a result, the wires inside the steel pipes have very few issues with insulation failure or disconnection, ensuring safety and a lifespan that is nearly permanent. Additionally, because it uses electric heating, it can provide uniform heating regardless of the length of the heater installation, and it is possible to adjust the supply voltage of the dedicated converter according to weather conditions. 【Features】 ■ High mechanical strength and nearly permanent lifespan ■ Easy to repair ■ Low-cost power supply installation ■ Uniform heating and adaptation to weather conditions ■ Energy-saving and economical *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

Kembon Kikai Kogyo Co., Ltd. is a company that designs and constructs energy-saving, high-efficiency snow melting and freeze prevention equipment. This document introduces examples of snow melting and freeze prevention devices, including the "road surface snow melting device" using embedded road heaters, as well as "steel structure snow melting devices" and "equipment snow melting devices," accompanied by photographs. [Contents] ■ Road surface snow melting device ■ Steel structure snow melting device ■ Equipment snow melting device ■ Inspection passage snow melting device ■ Road surface panel heater ■ Rubber mat heater *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The Top Mall Method (Small Diameter Boring Method) is a non-excavation construction method that uses a drill boring machine to install new buried pipelines. It is suitable for construction in locations where excavation is difficult, such as national roads and railways, and is a clean and simple boring method that does not generate excavated soil due to its non-excavation nature. Additionally, it is equipped with a directional correction boring method. 【Features】 ■ Boring direction correction function: Capable of curved boring (Type M primarily focuses on straight boring) ■ Detection of the leading drill head: Can recognize angles, ensuring high safety and reliability ■ Compaction method: No ground subsidence occurs due to the non-excavation method ■ Short construction period: Approximately 30m to 50m per day per location, depending on soil conditions, pipe size, and working environment ■ Can be performed during the day due to minimal traffic disruption ■ Environmentally friendly clean method that does not generate industrial waste due to the lack of excavation *For more details, please download the PDF or contact us.

• Other processing machines

"Agereel" is a device that combines the functions of a rail lifting device and low rollers. It significantly reduces the time required for track pad replacement and setting changes. It lifts the rail using human power without the need for hydraulic, pneumatic, or electric power. It allows for vertical movement while the rail is lifted, and the ascent and descent of the rail can be performed safely. Additionally, it is fixed to the tie plate, providing stability during operation. The device can be installed without interfering with other tasks. 【Features】 ■ Easily lifts rails ■ Allows vertical movement while the rail is lifted ■ Safe ascent and descent of the rail ■ Can be installed without interfering with other tasks ■ Usable even on cant (C=200) *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

The "IKA Brush" is a device mounted on the rear bogie of maintenance vehicles (such as BR) that cleans mud and dust from the rail surface using a rotating brush. By tilting the brush, it can clean two areas—the top surface and the side of the rail—using a single brush. The special brush allows for the supply of cleaning water to the brush tip, enabling concentrated washing of the rail surface. Furthermore, by using an air blow at the rear of the brush to blow away the cleaning water, it prevents the reattachment of dirt. The upper and lower cylinders ensure a gap of more than 50mm from the top surface of the rail when not in use. 【Features】 ■ Cleans the side of the rail head with a diagonal brush ■ Supplies cleaning water concentrated on the rail ■ Further cleans with a finishing blow ■ Joint patent application pending *For more details, please refer to the PDF document or feel free to contact us.

• Brush

The "Variable Axis Device" is a machine that produces the required bent hoses by moving the mold's nozzle in both the flow direction and perpendicular direction during extrusion from the extruder. In conventional manufacturing methods, a core was necessary, but this device eliminates the need for it, allowing for the production of bent hoses simply by changing the mold, from small diameters to large diameters. Additionally, the combination of a servo motor and NDS provides high repeatability accuracy. Furthermore, the data for bent hoses can be easily saved, making it simple to produce older types of bent hoses, which is suitable for diverse and small-lot production. 【Features】 ■ No core required ■ Bent hoses can be produced simply by changing the mold ■ High repeatability accuracy can be achieved ■ Data for bent hoses can be easily saved ■ Older types of bent hoses can also be easily produced *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

The "Automatic Drilling Device" is a machine developed for quickly and accurately performing the task of reusing old sewer pipes by inserting a resin pipe inside the main pipe. Using a caterpillar-like method, the body of the device extends and contracts as it moves forward, allowing it to easily navigate sloped sections. Additionally, the cutting tool moves automatically along the shape of the holes in the outer pipe, enabling easy and precise drilling even for irregularly shaped holes. 【Features】 ■ The method of movement inside the pipe is caterpillar-like ■ The cutter is controlled for alignment ■ The shape of the drilled holes can be confirmed using a CCD camera *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "Fully Automatic TIG Welding Device" is a machine that automatically performs TIG welding on the pipe joints of the evaporator (heat exchanger), which is a component of air conditioning systems. This part is manufactured using methods such as brazing, manual TIG welding, and screw fastening, but there are issues such as high equipment costs, the need for advanced skills, and low productivity. Our product has been developed with the aim of improving productivity and enhancing product quality by incorporating image processing systems and factory computers, taking these issues into account. 【Features】 ■ High productivity ■ High quality ■ Suitable for diverse and small-scale production ■ Easy to operate ■ Compact system ■ Adequate safety measures *For more details, please refer to the PDF materials or feel free to contact us.

• Welding Machine

The "Tokyo Metropolitan Government Building Window Cleaning Robot" is a device developed to automatically clean the windows of the new office building. It is suspended from the rooftop by a wire rope and ascends and descends along guide rails embedded in the building's wall. The window cleaning method involves spraying water and using a rubber scraper. 【Features】 ■ The adoption of the scraper method minimizes streaks left behind. ■ Controls the entry and exit of the scraper to eliminate uneven cleaning. ■ Water sprayed on the glass surface is collected in a dirty water tank within the device. ■ Sensors detect the height difference between the wall surface and the glass surface. ■ The scraper only makes contact with the glass surface. *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The "Recycled Rubber Mat Heater" utilizes waste materials from old tires, contributing to resource recycling and being an environmentally friendly electric heating mat. The surface's bumps serve as a slip prevention feature, while the appropriate weight and rubber backing prevent the mat itself from shifting. The SECT (Sector) type heater is energy-efficient, resulting in very low electricity costs and affordable maintenance. It boasts excellent insulation resistance, weather resistance, abrasion resistance, and heat resistance, maintaining harmony with the heating element and effectively absorbing impacts from pulling, jumping, etc., making it durable for long-term use. 【Features】 ■ Low maintenance costs ■ Environmentally friendly ■ Durable and long-lasting ■ Non-slip ■ Easy to install *For more details, please refer to the PDF materials or feel free to contact us.

• mat