オーエムヒーター List of Products and Services

We would like to introduce the standard type "Silicone Rubber Heater" handled by OM Heater. Complex shapes such as round, triangular, trapezoidal, and perforated can be produced from a single piece at an affordable price and with a short delivery time. With a thickness of only 1.5mm, the heater has excellent thermal responsiveness. It is a flexible, thin surface heating element that can replace traditional metal heaters. 【Features】 - Complex shapes can be produced from a single piece at an affordable price and with a short delivery time. - The heater thickness is only 1.5mm, providing excellent thermal responsiveness (thickness can also be adjusted by layering sheets). - Fits various shapes of heated objects such as cylindrical and conical. - Usable from low temperatures up to 200°C. - Supports various voltage designs from low voltage to 100V, 200V, 240V, etc. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'Silicone Rubber Heater (Type E)' handled by OM Heater. While conventional silicone rubber heaters use patterned round wires made of nickel alloy, we have created a pattern using etched nickel alloy foil. Taking advantage of the flexibility of silicone rubber, this surface heating element fits any shape of the object to be heated, such as cylindrical or conical shapes. 【Features】 ■ Extremely high-density design is possible ■ With a thickness of only 1.5mm, it has excellent thermal responsiveness ■ Fits any shape of the object to be heated, including cylindrical and conical shapes ■ Usable from low temperatures up to 200°C ■ Supports various voltage designs from low voltage to 100V, 200V, 240V, etc. *For more details, please refer to the PDF document or feel free to contact us.

The hollow-type far infrared ceramic heater has a hollow interior, allowing the heated internal air to circulate to the back and also be pushed out to the front.

We would like to introduce the 'Silicone Rubber Heater (H Type)' handled by OM Heater. It is manufactured with consideration for high-temperature use, and like other heaters, it has a high continuous use temperature with a maximum surface temperature of 300℃. It can be easily used when starting to heat rapidly. 【Features】 ■ Complex shapes can be produced from a single piece at an affordable price, with a short delivery time. ■ With a thickness of only 1.5mm, it has excellent thermal responsiveness. ■ It can perfectly fit any shape of non-heated objects, such as cylindrical or conical shapes. ■ Usable from low temperatures up to 300℃. ■ Compatible with various voltage designs from low voltage to 100V, 200V, 240V, etc. *For more details, please refer to the PDF document or feel free to contact us.

This is a device developed to facilitate the extraction of high-viscosity liquids and solidified materials. By heating adhesives, grease, asphalt, paint, wax, oil, and various resin materials inside the can, it stabilizes viscosity, requires a smaller pump capacity, and can be used regardless of the season.

We would like to introduce our "Heater for Drum Cans (Magnet Type)." One side of the silicone rubber heater is made with a magnetic sheet, allowing for easy installation and attachment in any location where magnets can stick. It enables quick and easy detachment during maintenance or when aligning the heater's position. 【Features】 ■ Can be manufactured from a single piece, accommodating complex shapes and short delivery times. ■ Achieves low prices by reducing components such as zippers, hooks, and springs. ■ The heater thickness is only 1.5mm, providing excellent thermal responsiveness (thickness can also be adjusted by layering sheets). ■ Fits perfectly to any shape of non-heated objects, such as cylindrical or conical forms. *For more details, please refer to the PDF document or feel free to contact us.

This is a device developed to facilitate the extraction of high-viscosity liquids and solidified materials. By heating adhesives, grease, asphalt, paint, wax, oil, and various resin materials inside the can, it allows for the stabilization of viscosity, requires a smaller pump capacity, and can be used regardless of the season.

At OM Heater Co., we accept "baking and assembly processing" of silicone rubber heaters onto metal items. Baking is possible on curved plates (special fixtures required), and thermostats, fuses, and other components can be attached to the surface. Our company has obtained certification for "AS9100," an internationally recognized aerospace industry quality management system. In the manufacturing and sales of various electric heaters, including silicone rubber heaters and temperature controllers, we are actively engaged in research and development of new technologies, continuously conducting business activities with consideration for the environment. We aim to respond to our customers' trust by providing higher quality and value-added products and services. 【Features】 ■ Baking dimensions up to 800mm x 800mm ■ Baking possible on curved plates (special fixtures required) ■ Thermostats, fuses, and other components can be attached to the surface ■ Materials suitable for baking include aluminum, stainless steel, copper, iron, brass, etc. *For more details, please refer to the PDF materials or feel free to contact us.

At OM Heater Co., we have started processing silicone rubber heaters to be bonded to the inner surfaces of pipes and tanks. We will also apply them to the insides of rollers and other equipment. Pipes and tanks can be made from various materials, including aluminum, brass, stainless steel, and plastic, with few restrictions. 【Features】 - The processable dimensions range from φ 75 to φ 200, with a length of up to 500mm. - Pipes and tanks can be made from almost any material, including aluminum, brass, and stainless steel (excluding Teflon and polyimide). - Bonding is also possible for supplied items (using silicone RTV adhesive). *Delivery time is approximately two weeks after order confirmation (or after the arrival of supplied items). *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Spiral Pipe Heater" handled by OM Heater. The rubber heater is shaped in a spiral for insulation and heating of equipment pipes and piping, making it easy to install. It is flexible and can adapt to different diameters. 【Features】 ■ Rubber heater shaped in a spiral for insulation and heating of equipment pipes and piping ■ Easy to install ■ Flexible and adaptable to different diameters (φ15 to φ30) ■ The heater can reach temperatures of approximately 120°C to 180°C (at 20°C) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce examples of product applications for our "O&M Heater." Starting with the "Parabolic Antenna Freeze Prevention Heater" for the general machinery manufacturing industry, it is also applied in heaters such as the "Hydraulic Unit Insulation Heater" and "Organic Waste Processor (Organic Fermentation Insulation)." In addition, it is utilized in various products such as the "Weaving Machine Humidity Drying Plate Heater," "Blood Testing Equipment," and "Security Camera Lens Anti-Fog Heater." For more details, please refer to the PDF download. 【Examples of Applications (Partial)】 ■ Gas Pipe Resin Coating Peel Preheating Heater ■ Bridge Pier Welding Preheating Heater ■ Rice Milling Machine Moisture Prevention Heater ■ Parabolic Antenna Freeze Prevention Heater ■ Pump Freeze Prevention Heater *For more information, please refer to the PDF materials or feel free to contact us.

The "Silicone Rubber Heater (Drip-proof Type)" is a product designed for outdoor use or in areas where water may come into contact, utilizing drip-proof materials. Leveraging the flexibility of silicone rubber, it fits various shapes of heated objects, such as cylindrical and conical forms. By using drip-proof materials, it is possible to maintain insulation resistance values against condensation. Complex shapes such as round, triangular, trapezoidal, and perforated designs can be manufactured from a single piece at an affordable price, with quick delivery times. 【Features】 ■ Drip-proof type made from materials that can withstand water exposure ■ Suitable for outdoor use or in areas where water may come into contact ■ Complex shapes can be manufactured from a single piece at an affordable price with quick delivery ■ Fits various shapes of heated objects, such as cylindrical and conical forms ■ Using drip-proof materials allows for the maintenance of insulation resistance values against condensation *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where the "Silicone Rubber Heater" from OM Heater was implemented as a shared heater for circuit heaters, compatible with both 100V and 200V. Previously, there were issues such as "I want to change the temperature for each heater, but it's difficult to install multiple types," and "Having separate models for 100V and 200V is confusing, cumbersome, and increases inventory." This product features a single flat heater design that allows for the design and manufacturing of different multi-circuit configurations. It provides heating as needed, with a design that also considers environmental impact. 【Improvements after implementation】 ■ A single flat heater design allows for the design and manufacturing of different multi-circuit configurations. ■ Circuit design for dividing heating areas can be freely done within a single heater. ■ The same heater can be designed for shared use with both 100V and 200V. ■ Heating as needed, with a design that also considers environmental impact. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where "silicone rubber heaters" were implemented for the insulation and heating of tanks and containers. The conventional issues included the need to "melt the material inside the container before it can be added" and the problem of "the warmed container cooling down during transportation." Our product can be wrapped around cylindrical containers such as drums for pre-insulation and heating. Additionally, if it is a magnetic type, it can be easily switched to different containers. [Improvements after implementation] - For cylindrical containers like drums, it can be wrapped around for pre-insulation and heating. - If it is a magnetic type, switching to different containers is easy. - Outdoor use is available in a splash-proof type. - Partial insulation can be easily customized for various shapes, including round, square, and other containers. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where a "silicone rubber heater" was implemented as a heater for maintaining the temperature of liquid injection dispensers. Previously, there were issues such as "the temperature of the supplied liquid changes between the inlet and outlet" and "work cannot be done until the machine warms up." This product allows for quick heating with an electric heater to speed up the setup process. Additionally, by using rubber heaters and heater hoses, it can transport the liquid at the same temperature. [Improvements after implementation] - The use of rubber heaters and heater hoses allows for temperature maintenance during transport. - Various shapes are possible to fit the containers or syringes that need to be managed. - Quick heating with an electric heater to expedite the setup process. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case of implementing a "silicone rubber heater" in medical devices. There were traditional issues such as wanting to heat films and other materials with stable heat, needing to vary output depending on the location, and having items that require careful and safe warming. This product combines a rubber heater with metal to achieve a heating surface with good uniform distribution from low to high temperatures. Additionally, it allows for circuit separation within the heater and the design of varying output strength even within a single circuit. [Improvements After Implementation] - Achieved a heating surface with good uniform distribution from low to high temperatures through the combination of rubber heater and metal. - Allows for circuit separation within the heater and the design of varying output strength even within a single circuit. - The speed of temperature rise can be designed based on the power input, ensuring reliable heat transfer across the surface. *For more details, please refer to the PDF materials or feel free to contact us.*

We would like to introduce a case where a "silicone rubber heater" was implemented for the insulation of hydraulic units related to machinery. Previously, there were issues such as "during the processing of pressed parts, the oil temperature was unstable, making it difficult to achieve part precision, resulting in initial waste shots." By introducing our product and managing the oil temperature in advance, we improved yield and enhanced oil circulation, allowing for a reduction in working hours by several hours. [Improvements After Implementation] ■ Improved yield by managing the oil temperature in advance ■ Enhanced oil circulation, resulting in a reduction in working hours by several hours ■ Considered ease of installation and removal, allowing use across multiple facilities ■ Eliminated unnecessary management or changes by simply adjusting to summer or specific environments, stabilizing the process *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of the introduction of a "Silicone Rubber Heater" as a metal preheating device (magnet type). Due to issues such as "warming up with a burner before iron welding" and "metal parts freezing in winter," this product was implemented. In addition to being able to preheat in advance by attaching the magnet heater, it also led to preheating of molds during external setup and a reduction in waste shots. 【Improvements after implementation】 ■ Preheating in advance by attaching the magnet heater ■ Preheating of molds during external setup and reduction in waste shots ■ Easy installation of just the necessary amount in required areas *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce a case where a "silicone rubber heater" was subjected to baking and assembly processing with metal items. "There are concerns about the adhesion level, but I want to increase the temperature of the rubber heater a bit." "The installation work for the heater is cumbersome," were some of the traditional issues. By integrating the rubber heater and metal components in-house, we enhance the safety of the heater and increase its heating capacity. Since it is a unified processing, unnecessary adhesives are not required, leading to reduced weight, decreased gas generation, and improved response. [Improvements after implementation] ■ Integrated processing of rubber heaters and metal components in-house - Enhances the safety of the heater and increases heating capacity ■ Assembly of surrounding components of the rubber heater is also possible - Shortens the assembly process ■ No unnecessary adhesives are required due to unified processing - Reduces weight and gas generation, improves response *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where "silicone rubber heaters" were implemented for resin heating, heating processing, complex shape heating, and partial heating. Due to issues such as "the shape is complex, so we need to divide it into several parts and use heating equipment," we introduced this product. The stretch type, which takes advantage of flexibility, allows for less concern about the breakage of heating wires. Additionally, the flexibility of the rubber heater enables heating on curved surfaces. 【Improvements after implementation】 ■ The stretch type, which utilizes flexibility, allows for less concern about the breakage of heating wires. ■ The flexibility of the rubber heater enables heating on curved surfaces. ■ Utilizing heat resistance, it can also be used for auxiliary heating inside heating pots or electric furnaces. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where "Silicone Rubber Heaters" were implemented for pumps, antennas, and various freeze prevention measures. The conventional issues included "the pump was frozen and suffered severe damage after turning on the power" and "the previous measures were insufficient against strong cold, leading to freezing problems." Our product can be customized to fit special shapes. Preventive measures can also reduce maintenance costs. 【Improvements after implementation】 ■ Customizable to fit special shapes ■ Reduced maintenance costs through preventive measures ■ Flexible design from a single unit to prepare for emergencies, rather than adding the same item ■ New waterproof type available, increasing the range of outdoor applications *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case where "silicone rubber heaters" were implemented for insulation related to powder manufacturing machinery and equipment. Due to issues such as "the bran from the brown rice milling machine becoming damp and clogging the discharge outlet" and "wanting to maintain a constant temperature when mixing powder and liquid, which varies with the seasons," this product was introduced. Heaters were installed on the back of discharge outlets and trays to prevent condensation, and they were also affixed to the outside of drums and tanks to maintain a constant environmental temperature. [Improvements after implementation] - Heaters were installed on the back of discharge outlets and trays to prevent condensation. - Custom orders can be made to fit complex shapes of dust collectors and large piping. - Heaters were affixed to the outside of drums and tanks to maintain a constant environmental temperature. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce a case study of the 'Silicone Rubber Heater (Drip-proof Type)' designed for outdoor use and drip-proof applications. Previously, issues included "the installation location of the heater occasionally gets condensation and becomes wet" and "since it is a heater installed on freezing equipment, it is better if it is resistant to water." Unlike conventional rubber heaters, this product maintains electrical insulation even in situations where it is only washed with water. The drip-proof heater resolves the issues you have had with water-related areas. 【Improvements After Implementation】 ■ Improved rubber heater material to maintain electrical insulation even when wet ■ Maintains insulation without soaking in situations where it is only washed with water ■ Applicable to areas of concern with standard rubber heaters and parts that required separate waterproofing ■ The drip-proof heater resolves issues you have had with water-related areas *For more details, please refer to the PDF document or feel free to contact us.

In this document, we introduce case studies of "silicone rubber heaters" categorized by application. We include information on insulation related to hydraulic units, insulation for powder manufacturing machinery, and heaters for liquid injection dispensers. In addition to conventional issues and improvements, we also present applicable products for each case, making it a useful reference when considering implementation. 【Case Studies (Partial)】 ■ Insulation related to hydraulic units ■ Insulation for powder manufacturing machinery ■ Preheating devices for metals (magnet type) ■ Heaters for liquid injection dispensers ■ Heating for resins, heating processing, complex shape heating, partial heating ■ Medical devices *For more details, please refer to the PDF document or feel free to contact us.

At OM Heater Co., Ltd., we perform "three-dimensional molding processing." We shape silicone rubber heaters to match the form of the heated object. In some cases, the production of molds may be necessary. Please check with our sales team for delivery times. Feel free to contact us when placing an order. 【Features】 ■ Capable of handling complex shapes, with production possible from a single piece ■ Completely fits three-dimensional shapes ■ Depending on the shape, we can accommodate mold production *For more details, please refer to the related links or feel free to contact us.