アドバンテック東洋 List of Products and Services

●This is a stainless steel housing for a single unit with a center post structure consisting of two parts: the head and the body. ●By removing the bag nut on the top of the head, the filter can be easily replaced. ●The filter can be replaced while still connected to the piping.

● This is a stainless steel housing consisting of two parts: the head and the body. ● The head and body are sealed by a clamp, making filter replacement easy. ● It allows for precise filtration using various membrane filters. ● With fewer parts and a simple structure, it is an inexpensive, lightweight, and easy-to-handle product. ● Being a lightweight housing, it is suitable for integration into cleaning machines and other equipment.

● By removing the body clamp, it can be separated into two parts: the body and the base, and the internal parts are mostly detachable. ● Types for filter dimensions of 250mm, 500mm, and 750mm are available, allowing you to choose models that can accommodate various shapes of filters. ● Made of SUS304.

● For the IN and OUT connections, sanitary ferrules are used, allowing for the installation of a housing between the straight pipe sections. ● Filter sizes for 250mm type, 500mm type, and 750mm type are available, and models can be selected to accommodate filters of various shape codes. ● Made of SUS304.

It is easy to filter sterilize small amounts of solutions and remove particles.

It is easy to filter sterilize small amounts of solutions and perform particle removal filtration.

●KS-25F・47F: This is a filter holder designed to be set at the end of an ampoule filling device for injection solutions and the like. The KS-47F is equipped with a vent valve to remove residual air within the holder. Dedicated stands for 6 or 10 units can also be prepared according to the number of fillings. ●KS-47: This is a stainless steel filter holder that is effective for clarifying liquids with relatively low capacity, filtering sterilization, or gas clarification, and is excellent in pressure resistance, heat resistance, and durability. It is equipped with a vent valve to expel air in the piping that could adversely affect filtration. To ensure that air can be expelled from the holder regardless of whether it is used vertically or horizontally, the ceiling on the primary side is inclined. To facilitate easy use in the laboratory, the holder itself is designed with a groove for clamping.

It is used for filtration sterilization and clarification of liquids and gases through pressure filtration. The support screen is coated with PTFE, allowing for autoclave sterilization while the filter is in place.

This is a clean cartridge filter made of nylon membrane material, which has excellent chemical resistance. Since the media itself is hydrophilic, there is no need for pre-wetting with alcohol or other substances for filtering aqueous solutions. 【Features】 ■ Hydrophilic Media There is no need for pre-wetting with alcohol or other substances even when filtering liquids with high surface tension, such as water, which can lead to a reduction in the amount of waste liquid during the initial filtration of chemicals and improve work efficiency. ■ High Cleanliness The media itself is hydrophilic and does not contain wetting agents, resulting in excellent cleanliness. Additionally, all products undergo flushing with ultra-pure water before shipment, ensuring extremely low levels of elution and excellent cleanliness even for PGMEA used in the electronics industry. ■ High Reliability All products have undergone integrity testing, making this a highly reliable cartridge filter. *For more details, please contact us.

This is an all-polyethylene cartridge filter developed for resist filtration in the electronic industry, such as semiconductors and liquid crystal displays. 【Features】 - It is a low-elution cartridge filter made entirely of polyethylene. - It employs a membrane filter with an extremely sharp pore size distribution, achieving higher filtration accuracy compared to conventional PTFE membranes. - It also exhibits excellent cleanliness against organic solvents used in the electronic industry. *For more details, please contact us.

This filter is suitable for filtering amorphous foreign substances that tend to cause clogging with conventional filters. 【Features】 - Less prone to clogging even with amorphous foreign substances - The pleated structure has a large filtration area, significantly reducing pressure loss compared to conventional depth cartridge filters - Although the effective filtration area is reduced compared to conventional PP pleated cartridge filters, the depth effect achieves high particle capture efficiency with low pressure loss - A reliable cartridge filter that adopts particle capture performance indicators - The filter is formed from melt-bonded polypropylene filaments, resulting in minimal fiber shedding - Excellent chemical resistance, suitable for use with acids, alkalis, and many organic solvents *For more details, please contact us.

The filter has a high void ratio and a structure where the pore diameter decreases from the outside to the inside, allowing for a long filtration lifespan. The material is composed entirely of polypropylene, which has excellent chemical resistance and can be used with acids, alkalis, and many organic solvents. Since the filter is laminated with melt-bonded polypropylene filaments, there is almost no fiber shedding. For more details, please refer to the PDF document or feel free to contact us.

The TCP type is formed from melt-bonded polypropylene filaments, with minimal fiber detachment or leaching. Since the material is entirely polypropylene, it can be used with acids, alkalis, and many organic solvents. The high porosity of the filter and the wide effective filtration area of 4,200 cm² to 6,200 cm² per 250 mm type increase the amount of particulate matter collected, resulting in a long filtration lifespan. For more details, please refer to the PDF document or feel free to contact us.

This is a cartridge filter made of PTFE membrane filter and polypropylene or polyethylene, featuring chemical resistance. 【Features】 - The PTFE membrane filter does not use surfactants. The filter seal is thermally fused, making it a clean cartridge filter. - The TCF-020L type is a low elution cartridge filter composed solely of PTFE and high-density polyethylene. - All products have undergone integrity testing, ensuring high reliability. - By offering the TCF-020L with an effective filtration area 2.3 times larger (compared to the conventional TCF-020) and the TCF-050L with an effective filtration area 2.5 times larger (compared to the conventional TCF-050), we have achieved lower resistance and longer lifespan. *For more details, please contact us.

This is a cartridge filter composed of carefully selected polyether sulfone membrane filters and polypropylene, resulting in minimal leaching of substances. The filter has a high porosity and a two-layer structure with different pore sizes, allowing for low resistance, high efficiency, and a long filtration lifespan. Since the media is inert, there is almost no adsorption of the components of the filtered liquid. All products have undergone integrity testing, making this a highly reliable cartridge filter. For more details, please refer to the PDF document or feel free to contact us.

This is a cartridge filter made of PTFE membrane and composed of polypropylene or polyethylene, featuring excellent chemical resistance. The PTFE membrane filter does not use surfactants. Additionally, the filter seals are thermally fused, making it a clean cartridge filter. All products have undergone integrity testing, ensuring a highly reliable cartridge filter. The TCF-020L offers an effective filtration area 2.3 times larger than the conventional TCF-020, and the TCF-050L has an effective filtration area 2.5 times larger than the conventional TCF-050, achieving high flow rates and extended lifespan. For more details, please refer to the PDF document or feel free to contact us.

The TCP-V type is formed from melt-bonded polypropylene filaments, with almost no fiber detachment or leaching. Since the material is entirely polypropylene, it can be used with acids, alkalis, and many organic solvents. Compared to the TCP type, it has improved the filtration speed of high-viscosity liquids by about 30% while maintaining equivalent particle capture performance. For more details, please refer to the PDF document or feel free to contact us.

"ROSSI" is an automatic tabletop, fully automatic filter paper folding machine that shapes cone-shaped pleated filter paper in about 7 seconds per piece. It also reduces the risk of human contamination and damage. We offer three types: manual, automatic tabletop, and fully automatic machines. 【Features】 ■ Automatic tabletop, fully automatic type ■ Shapes cone-shaped pleated filter paper in about 7 seconds per piece (12 folds on each side, totaling 24 folds) ■ Reduces the risk of human contamination and damage ■ Three types: manual, automatic tabletop, and fully automatic *For more details, please refer to the PDF document or feel free to contact us.

"DISMIC" is a disposable membrane filter unit that allows for easy filtration sterilization and particle removal of small volumes of solutions, chemicals, and gases. It features five types of membrane filter materials (cellulose mixed ester, cellulose acetate, polyether sulfone, hydrophilic PTFE, PTFE) and four pore sizes ranging from 0.20μm to 0.80μm (0.80μm is available only in CP/CS types, and 0.50μm is available only in JP type), with a wide variety of sterilized types prepared. Additionally, it can perform filtration methods under both positive and negative pressure, resulting in minimal sample loss. 【Features】 ■ Easy filtration sterilization and particle removal of small volumes of solutions and gases ■ High cost-effectiveness ■ Wide variety of options ■ Housing material is free of pigments ■ Simple installation operation *For more details, please refer to the PDF document or feel free to contact us.

【Features】 ● The luer fitting design allows for easy attachment and detachment to a syringe (luer lock syringe). ● This small-capacity pressure holder is suitable for autoclave sterilization and is used for filtering small volumes such as eye drops and serum, as well as HPLC samples. ● The KS-25RA is used for removing ultra-fine particles contained in photoresist for applying silicone wafers and glass mask processors. *For more details, please download the PDF or feel free to contact us.

● KP-47H: A vacuum filtration device consisting of a 300 mL graduated funnel, support screen, O-ring, rubber stopper, and base. ● KP-47U: A type that adds a funnel cover, rubber cap, and a 13 mm diameter air vent DISMIC (13JP050AN, 5 pieces) to the KP-47H, creating a closed system on the filtration primary side. ● KP-47W: A vacuum filtration device equipped with a 500 mL graduated funnel, with the same configuration as the KP-47H. ● KP-47S: A microbiological testing unit that includes a 300 mL graduated filtrate receiving flask added to the KP-47U. It can be easily set directly into the filtrate receiving flask and is sealed with an O-ring, making the entire filtration system a closed system, thus avoiding cross-contamination between the original solution and the filtrate with the outside. The flask comes with a flask cover, allowing for direct cultivation tests. ● KP-47T: A vacuum filtration device equipped with an 800 mL graduated funnel, with the same configuration as the KP-47H. This type has increased height while maintaining the outer diameter of the 500 mL type funnel for the KP-47W, thereby increasing its capacity.

【KGS-04】This is used for tests such as the insoluble particulate matter test for small-volume injectable preparations and single-dose packaged eye drops in the pharmacopoeia. It is used when the effective filtration area is small at 0.13 cm² and when the amount of particulate matter and sample volume are minimal. 【KG-25/KGS-25】This is used for microbiological tests, particulate tests, etc. It is used when the sample is small or when filtration with a small filtration area is required. 【KG-47/KGS-47・47-TF】This is used for microbiological tests, particulate tests, etc. The effective filtration area is designed so that the mesh of the membrane filter with grid lines (3.1 mm spaced grid) has 100 squares. KGS-47-TF is coated with PTFE on the bottom surface of the funnel to prevent the filter from sticking to the glass surface even when sterilized in an autoclave with the filter set in place. 【KG-90/KGS-90】This is used when filtering relatively large amounts of liquid.

Our company, which specializes in research and development as well as manufacturing, offers a wide range of filter papers and filters, including "filter plates" made from diatomaceous earth and cellulose. These filter plates feature high adsorption and internal capture effects, suitable for particle removal, sterilization filtration, and pyrogen removal. Our lineup includes the "NA standard type," the "NRP type" with low impurity content, and the long-lasting "NA long-life type." They are also compatible with autoclave sterilization, hot water sterilization, and chemical sterilization. ★ We are currently offering samples! For more details, please refer to the materials or contact us. 【Product Lineup】 ■ NA Standard Type / NA Long-Life Type Features high adsorption and internal capture effects due to zeta potential and positive effects. ■ NRP Type Suitable for filtering components that are easily affected by impurities such as iron. ■ Cellulose Plate for Support of Additives Made from strong paper, allowing for repeated peeling operations of the pre-coat layer. * There are also filter plate cartridges that are assembled into a cartridge shape. Please refer to the link below. https://www.ipros.jp/product/detail/2000750263

The "PES Membrane Compact / Capsule Cartridge Filter" is a product composed of a membrane filter made of polyethersulfone (PES) and polypropylene, known for its excellent cleanliness. Since the media is inert, there is minimal adsorption of the components of the filtered liquid, making it suitable for filtering samples in media and biochemical fields where adsorption is a concern. The filter has a high porosity and a two-layer structure with different pore sizes, resulting in low resistance, high efficiency, and a long filtration lifespan. 【Features】 ■ High porosity of the filter ■ Low resistance, high efficiency, and long filtration lifespan ■ The "MCS type" allows for autoclave sterilization and in-line steam sterilization ■ Suitable for filtering samples in media and biochemical fields where adsorption is a concern ■ All products have undergone integrity testing, ensuring high reliability *For more details, please refer to the PDF document or feel free to contact us.

- Excellent chemical resistance This is a cartridge filter composed of a PTFE membrane filter and polypropylene, offering excellent chemical resistance. - Cleanliness The PTFE membrane filter does not use surfactants. Additionally, the filter seal is thermally fused, making it a clean cartridge filter. - Suitable for food applications This product complies with the standards and specifications for food, additives, and containers or packaging as per the Ministry of Health and Welfare Notification No. 370 of Showa 34. - High reliability All products have undergone integrity testing, ensuring high reliability.

- The compact cartridge filter MCF type can be sterilized by autoclave and inline steam sterilization. - The capsule cartridge filter CCF type can be sterilized by autoclave (inline steam sterilization is not possible). - All products have undergone integrity testing and are highly reliable. *For more details, please refer to the PDF document or feel free to contact us.*

This product is a cartridge made from refined cellulose fibers and diatomaceous earth. It is effective in removing microorganisms and gel-like foreign substances that cannot be captured solely by pore size, thanks to filtration aids such as diatomaceous earth and the adsorption effect of zeta potential.

● This is a single-use all-fluororesin housing made up of a head, body, and locking nut. ● Since it uses ultra-high purity PFA, there is almost no leaching from the housing, making it suitable for highly corrosive chemicals such as strong acids and strong alkalis. ● It features a design where the head and body are tightened with a locking nut, providing excellent sealing performance. ● The head and joint section are integrated, making it compact and providing excellent sealing performance. ● Filters are available in 250mm and 500mm sizes. ● Compatible cartridges include Code M with outer diameters of 70mm and 83mm, and Code R with an outer diameter of 70mm.