大川三基 List of Products and Services

It is a supply device that draws out electric wires from a drum and feeds them into cutting machines and other equipment. By using a sag control with a roller, it synchronizes the wire feed with the drawn-out speed. 【Features】 ■ Allows for completely synchronized wire feeding through sag control ■ Drum elevation is electric, pressing against the drive tire with appropriate pressure to stop ■ Automatic stop at the drum attachment/detachment position by setting the drum flange diameter ■ Operated via a touch panel ■ Data set for each drum can be saved with a memory function ■ There is one contact each for external emergency stop input/output signals.

This is a supply device that draws electric wires from a drum and feeds them into cutting machines and other equipment. The wire is fed out in sync with the drawn speed through sag control using a stepped roller. 【Features】 ■ The drum elevation is electrically operated. ■ The drawing tension is maintained at a constant level by the "weight of the stepped roller + weights." ■ The drum can be quickly set in place using a push-cup method. ■ Settings and operations are managed via a touch panel. ■ The rotation axis automatically moves to the drum set position. ■ Up to 50 memory registrations for settings such as drum diameter are possible. ■ There is one contact each for external emergency stop input and output signals. *For more details, please refer to the PDF document or feel free to contact us.

This is a peripheral device that cuts wires using a rotary cutter. It operates in conjunction with models SA-371 and SA-371B, and cuts the measured wire with this machine. The cutting surface is cut at a right angle by the rotary cutter. The cutting speed and rotation speed can be adjusted as desired. During cutting, air cooling and vacuum operation are activated.

This is a supply device that draws electric wire from a bobbin and feeds it into cutting machines and other equipment. The wire is dispensed in sync with the drawn speed through sag control using stepped rollers. 【Features】 ■ The bobbin is rotated using a kerel method for supply. ■ The stepped rollers can absorb a maximum sag amount of 2400mm with three rows of grooves. ■ The drawing tension is maintained at a constant level by the weight of the stepped rollers plus additional weights. ■ The method of fixing the bobbin allows for quick setup using a centerless and push-cup method. ■ There is one contact each for external emergency stop input and output signals. *For more details, please refer to the PDF document or feel free to contact us.

This is a supply device that draws electric wires from a drum and feeds them into cutting machines and other equipment. The wire is fed out in synchronization with the drawn speed through sag control using a roller. 【Features】 ■ Complete synchronization of wire feeding through sag control ■ Quiet feeding sound as the drum is rotated by the drive tire ■ Pressure applied to the drum by the drive tire is adjusted to the proper pressure through electric movement ■ Electric lifting and lowering of the drum ■ Manual operation possible via remote control ■ Custom manufacturing available for user-specified drum sizes ■ One contact each for external emergency stop input/output signals *For more details, please refer to the PDF document or feel free to contact us.

This machine is designed to be used in conjunction with the OP-106F model to feed out the drum. When pulling in the electric wire with the OP-106F model, the under roller becomes free, and when the OP-106F model stops, the brake is applied to the under roller. This control prevents the drum from rotating due to inertia. It is also possible to use it independently in combination with the SA series models.

This machine is designed to dispense bundled electrical wires and similar materials. By pulling the wires, they rotate smoothly on a free-bearing table and are dispensed. As a result of reduced unnecessary rotation due to inertia, the amount of slack has also decreased.

This machine is a supply device that draws in drums or bundled wires in the middle and feeds out the wires at a constant tension. The supply speed is automatically synchronized, and no special settings are required. It is effective when used in conjunction with our EM-202B and EM-210 models, among others.

This product is a device that outputs volume values based on the sag of electric wires and performs rotational control for inverters and the like. It can be used with existing wire winding machines and wire supply machines. Custom manufacturing is also possible within the user's specified application range.

This machine is an intermediate peeling device that works in conjunction with the SA series to perform intermediate scoring during length measurement. The intermediate scoring consists of horizontal cuts on the left and right and vertical cuts on the top and bottom, allowing for easy removal of the insulation. Various settings, including bottom dead center adjustments, are all done via a touch panel. The blade type is a dedicated blade, but it can be easily inserted into the blade holder. With a maximum wire width of 100mm, it can also be used for flat cables and similar applications.

This machine is a device that works in conjunction with the SA series machines to wind flat cables. The winding size varies depending on the size of the winding umbrella for FL. It uses a slip method with a powder clutch, ensuring that the winding tension remains constant. The winding direction is horizontal, and the table is equipped with a free bear, allowing the winding umbrella for FL to descend after winding, making it easy to move the wound cable.

This is a peripheral device for discharging and storing cut wires. It operates in conjunction with models SA-382, SA-371, SA-371B, and OP-200, allowing the sent wires to pass through the discharge duct and be discharged into the collection bucket after being cut. The length of the discharge duct can be customized according to user specifications.

This machine is a device that tilts a roller conveyor measuring 2500mm in length and 1500mm in depth within a range of 0° to 45°. It is designed to reduce the burden on operators during tasks such as packing heavy items. The tilting operation includes fine adjustments and continuous movements, and it also allows for the insertion and removal of a stopper.

Okawa Miki Co., Ltd. develops and manufactures wire strippers, cable cutters, and other wire processing machines. The "wire" is constantly changing. We strive to catch this information quickly and continuously work on technical training to achieve precise processing. We also manufacture peripheral equipment such as wire winding machines and wire supply devices, and we offer consulting services related to systematized wire processing equipment. 【Business Activities】 ■ Product development, design, and manufacturing ■ Consulting *For more details, please refer to the PDF document or feel free to contact us.

This catalog features a wide range of products from Okawa Miki Co., Ltd., which specializes in the development and manufacturing of wire processing machines. Included in the lineup is the tabletop wire stripper "KIND2-6Z" with a dedicated blade, as well as the wire supply machine (for drums) "OP-102." Our company is dedicated to meeting customer needs through continuous improvement. Please feel free to contact us. 【Contents】 ■ Semi-automatic machines: terminal stripping / intermediate stripping / general winding ■ Automatic machine line: wire supply machines / winding and discharge *For more details, please refer to the PDF document or feel free to contact us.

"Cable Supply" is a bobbin and drum supply device that improves measurement accuracy by supplying wires to length measurement and cutting machines from bobbins and drums. We offer a variety of supply machines tailored to drum sizes, including the bobbin feeder "OP-107C," the vertically movable drum supply machines "OP-111C/OP-112," and the tire-driven "OP-113." *The tire-driven type quietly rotates the drum by pressing the tire against the drum flange. 【Product Lineup】 ■ OP-107C: Bobbin Feeder ■ OP-111C/OP-112: Vertically Movable Drum Supply Machine ■ OP-113: Elevating Drum Supply Device ■ OP-102: Drum Supply Device ■ EM-240: Drum Slider *For more details, please refer to the related links below or check the "Peripheral Equipment" section on the special site.