三甲 List of Products and Services

This is the "Palette D4-1111-6N (OBP)" with 5% Ocean Bound Plastic (OBP) blended in. Ocean Bound Plastic (OBP) refers to plastic waste that is highly likely to flow into the ocean, which has been discarded on land within 50 km of the coast. We are engaged in activities to collect this waste before it flows into the ocean and upcycle it into logistics equipment. Additionally, through the development and sale of OBP pallets, we are participating in the "Plastic Smart" initiative promoted by the Ministry of the Environment. *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Sankotal #1-3" is a round container of the tupperware type that covers the main body with a lid. When the lid is closed, the protrusions on the inside of the lid securely engage with the opening of the main body, so there is no worry of the lid coming off unexpectedly. Additionally, since the lid is of the tupperware type, it can be reused multiple times. *Please note that it is not completely airtight, so there is a possibility of liquid leakage during transport for items with high moisture content. <Other Features> - By using a soft material for the lid, it does not require much force to open and close, making it excellent for repeated tasks such as sealing the lid. - When displaying or storing, stable stacking is possible through the lid. 【Specifications (partial)】 ■External dimensions: φ146×86 (set) mm ■Internal dimensions: φ134×75 (set) mm ■Lid external dimensions: φ146×7 mm ■Capacity: 1.0l ■Material: PE ■Color: Body / Cream, Lid / Milky White *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

The "Milk Box YMS-6" is a delivery-exclusive cooler box with high insulation performance that can hold six 180 mL milk bottles and three cooling packs. It can maintain a product temperature below 10°C for over 11 hours at an ambient temperature of 37°C. <Other Features> - The lid does not protrude beyond the back of the main body when opened, allowing for placement against walls. - The lid can stand upright when open, making it easy to load and unload contents. - A slide lock is installed in a position that is not visible from the front of the lid. This enhances security by allowing for simple locking of the lid while maintaining insulation performance. - A padlock can also be attached to the lid. - To prevent the cooler box from being blown away by the wind, weights can be placed between the main body and the insulation material (optional). - If the lid fades due to aging, it can be removed and replaced. 【Specifications (partial)】 ■External dimensions: 314×238×227mm ■Internal dimensions: 225×145×160mm ■Effective internal dimensions: 220×140×160mm ■Delivery time: 3 days ■Shipping unit: 8 *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Sun Shop Cargo 14L" is an in-store basket with a distinctive mesh design. In particular, the mesh on the longer sides evokes the image of a tower (such as the Eiffel Tower) when the handles are raised. Its compact size adds to its uniqueness. The handle holes and handles of the main body are designed to minimize pressure on the hands when gripped, providing excellent handling. 【Specifications】 ■External dimensions: 396×256×224mm ■Capacity: 14.2l ■Material: PP ■Shipping unit: 20 ■Delivery time: Please consult us ■Nesting height: 30mm ■Color: White *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Bottle Crate YM-20" is a partitioned crate that can hold 20 small 100mL bottles (φ56) arranged in 4 rows of 5. It features a textured surface for label removal located at the bottom center of the short side and at the corners. Additionally, a handle is installed at the top center of the short side, enhancing handling convenience. 【Specifications (partial)】 ■ External dimensions: 335×272×114mm ■ Internal dimensions: 306×246×103mm ■ Effective internal dimensions: 58×58×95 (1 compartment) mm ■ Material: PP ■ Shipping unit: 10 *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

The "Egg Tray 30G" is a tray for transporting eggs that can hold 30 eggs. Due to its excellent bending strength, it minimizes contact between eggs during automatic line transport, preventing breakage. Since its flat dimensions are equivalent to the existing product "Egg Tray," the same transport systems can be utilized. *Note that the height is greater, so the storage capacity differs. When 10 pieces of the "Egg Tray 30G" are stored in the SN Container C#50, it can transport 240 eggs. Please feel free to consult us when you need assistance. 【Specifications】 ■ External dimensions: 296×296×54mm ■ Material: PP ■ Shipping unit: 100 ■ Delivery time: 3 days ■ Number of eggs stored: 30 ■ Compatible products: San Container B#45, B#45-2, B#45-3, SN Container C#41, C#50 *For more details, please refer to the PDF document or feel free to contact us.

• tray

The "Bobin 445" is a bobbin with an outer diameter of φ445 mm, used for winding wires and electrical cables. <Features> - It is an integrated molding type with no gaps at the base, preventing wire from getting caught. - The hole for the winding machine's shaft is elongated, making it compatible with many winding machine manufacturers. (Compatible with shaft diameters of φ20 mm or less, within a range of 80 to 100 mm from the center. *Please confirm with the actual product.) - Two diagonal starting holes (5×15 mm) are placed on the body of the bobbin, allowing for easy initiation of the wire winding process. 【Specifications】 ■External dimensions: φ445×243 mm ■Internal dimensions: φ300×193 mm ■Material: Recycled ABS ■Shipping unit: 3 ■Delivery time: 3 days ■Color: Black *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Display Oricon 6422" is a foldable container used as a product display stand. It is 60mm taller than the existing Display Oricon 6416 and can be interlocked, allowing for combinations that enhance the display effect. <Features> - The sides have minimal protrusions and no holes other than the handles. This design makes it difficult for vegetable scraps and dust to accumulate, making it easy to clean without compromising the display effect. - The inner surface has a shape designed to minimize contact between the contents (such as produce) and the ribs, reducing the likelihood of damage during temporary transport compared to conventional display oricons. - The special axis shape allows the long side panels to gradually open even when folded backward, making it less likely for the long side panels to catch on the display oricon below when lifted. 【Specifications (partial)】 ■ External dimensions: 600×400×220(55)mm ■ Internal dimensions: 570×370×208mm ■ Effective internal dimensions: 570×370×198mm ■ Capacity: 41.8L ■ Material: PP ■ Colors: Brown, Black *For more details, please refer to the PDF document or feel free to contact us.

• container

■ The weight is 1/7 of a cage cart, significantly reducing the workload. The weight has decreased from approximately 37 kg to 5.4 kg, which is about 1/7, greatly alleviating the burden of movement. Being lightweight, it is easy to store by stacking, and it does not take up much space. There is no hassle of assembly or folding like with cage carts. ■ Since it is a platform cart, it can be used safely without a specific direction. Due to the lack of a frame like that of a cage cart, it can be used without a specific direction. When setting up in sorting work areas, it can be done without worrying about direction, improving efficiency. Furthermore, without a frame, it does not obstruct loading containers or replenishing products, allowing for safe and smooth operations. ■ Safe and reliable binding with a special hook and dedicated belt. The special hook installed on the "Sun Carry 7456V" allows for binding work to be done by one person, saving on labor costs. The tip of the hook has a guiding shape, making it easy to thread the belt and difficult to slip out. ■ A pocket for storing a fixed belt is installed in the center of the deck surface. (300×217×depth 50 mm) This eliminates the hassle of separate management and prevents loss.

• Trolley

The "Sambox 26-2C" is a product that has increased the height of the existing Sambox #26-2B by 36mm. It can be interlocked with Sambox #26-2 and can be selected according to the contents. 【Specifications (partial)】 ■External dimensions: 518×436×116mm ■Internal dimensions: 478×396×108mm ■Effective internal dimensions: 472×389×100mm ■Capacity: 20.1L ■Material: PP ■Color options: Blue, Gray *For more details, please refer to the PDF document or feel free to contact us.

• container

The "SN Container C#37ZT" is a type of SN container that is perfectly suited for loading onto the bed of a light truck, with the same color and shape. Its external dimensions are the same size as the Sun Container B#50 series, allowing for similar use in light trucks. (Note: Calculated based on light truck bed size: 1945×1410mm.) It is compatible with the Sun Container B#50 series, which is widely used by many fresh produce producers. <Other Features> - With the SN design, it is more compact compared to the Sun Container B#50 series, allowing for efficient storage. - Additionally, when loading empty boxes onto a truck, nesting can reduce the height (approximately 27% reduction), enabling safe transportation. - It features a fold-over handle design, preventing contact between hands and contents, thus preventing damage to the contents. - Large chamfers and R shapes are installed on the inner surface of the container, making it difficult for fruits and vegetables to get marks or scratches, thereby minimizing quality degradation during storage and transportation. - It can be stacked in a sliding manner along the short and long sides, making stacking operations easy. *For more details, please refer to the PDF document or feel free to contact us.

• container

The "SN Container C#19CH" is a type of SN container that can perfectly hold 12 1L paper packs (gable top packs) arranged in 3×4 rows, all of the same color and shape. It demonstrates high return efficiency due to its SN design. <Features> - The corners of the inner bottom surface are designed to be recessed, preventing the corners of the paper packs from being crushed and thus maintaining quality. - It allows for slide stacking in both the long and short edge directions, making manual loading and unloading easy. - To prevent collapse due to leg recess during stacking, claws are installed on the legs and rails on the flanges. - The legs are designed with drainage holes and a tapered shape, preventing water accumulation and enhancing washability. - A rib for label peeling and a textured surface are provided at the bottom of the short side handles. - The handles are curved to fit the fingers, making them easy to grip and enhancing handling performance. 【Specifications (partial)】 ■ External dimensions: 361×272×277mm ■ Internal dimensions: 318×242×261mm ■ Effective internal dimensions: 302×226×251mm ■ Capacity: 18.9L *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Oricon EP58B" is a collapsible container designed for KD logistics that can perfectly accommodate 4 pieces in a 2x2 arrangement on a 911-sized pallet. - It fits with the dedicated "Oricon EP58B lid." - When banding in the folded state, a special shape that supports the areas where the band contacts helps prevent deformation of the lid, combined with cutouts for the band, ensuring safe loading and unloading. - The interior has a flat shape, making it difficult for contents to get caught, and it excels in washability. - Label peel-off lines are installed on the top surface of the lid and the long side bottom plate to prevent adhesive residue from labels. 【Specifications (partial)】 ■ External dimensions: 541×441×304(92)mm ■ Internal dimensions: 497×397×294mm ■ Effective internal dimensions: 497×397×286mm ■ Capacity: 58.0L ■ Material: PP/conductive PP ■ Color: Blue/Black *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Oricon P63B" is a folding container equipped with a short-side re-fitting mechanism. It features a fold-back section for finger placement at both ends of the lower short side, allowing for easy re-fitting from the outside if the engagement of the short side panels becomes misaligned or detached. Even if the engagement of the lower Oricon in a stacked state comes undone, it can be re-fitted from the outside, eliminating the need to disassemble the stack and helping to prevent load collapse. <Other Features> - The external dimensions of the Oricon are 600×400mm, allowing for the stacking of 4 units on an 812-sized pallet and 5 units on a 1012-sized pallet (100% stacking efficiency). - It has easy-to-handle grip holes that enhance handling. - The printed surface on the side and the label-removable textured surface on the upper short side are designed to prevent adhesive residue from labels, ensuring cleanliness. 【Specifications (partial)】 ■ External dimensions: 600×400×319(74)mm ■ Internal dimensions: 569×368×309mm ■ Effective internal dimensions: 568×367×301mm ■ Capacity: 64.3L ■ Material: PP ■ Color: Blue *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Palette R4-1012-9" is a pallet suitable for both vertical and horizontal support types, designed for use in frozen and refrigerated environments. Please feel free to contact us for inquiries. 【Specifications (partial)】 ■External dimensions: 1005×1205×130mm ■Color ■Weight: 17.0kg ■Material: PE ■Shipping unit: 2 ■Delivery time: 3 days ■Model: Four-way entry, double-sided use type *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Palette LX-1010D2" is a pallet designed for stacking 18L cans (one-gallon cans: 238×238×349mm) perfectly in a 4×4 arrangement on a flat surface. Anti-slip tape is placed according to the stacking positions of the one-gallon cans, ensuring that all cans stacked in a 4×4 arrangement come into contact with the anti-slip tape. The anti-slip tape is arranged to contact the outer sides of the one-gallon cans, causing the cans to tilt slightly inward, which prevents shifting or falling during transport due to vibrations. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ External dimensions: 1000×1000×132mm ■ Color: Blue ■ Weight: 23.1kg (LX-1010R2) / 20.6kg (LX-1010D2) ■ Material: PP ■ Shipping unit: 2 ■ Delivery time: 3 days ■ Model: Two-way entry double-sided use type (LX-1010R2) / Two-way entry single-sided use type (LX-1010D2) *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Plamo Module 10B" is a box pallet with a door opening specification for the short side (frame) of the "Plamo Module 10." Similar to the "Plamo Module 10," the short side (frame) can be removed, but it is ideal for workspaces where there is no space to place the removed short side (frame) or for light stacking tasks that do not require removing the short side (frame). The opening line when the door is opened is straight, making it difficult for contents to get caught during stacking operations. 【Features】 ■ Short side door included ■ Full opening is also possible ■ Label/card holder installation surface available *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Home Oricon S50M" is a 50L size container from Home Oricon, designed as a collapsible container with an inward folding type. - It is a lightweight Oricon in a ball container size, compatible for interlocking with the "Home Oricon S30M" which has a different height. - The short side panel handles are semi-circular, and the long side panel handles are arch-shaped, making them easy to carry and gentle on the hands. - The lock release lever allows for easy folding operations. Please feel free to contact us for any inquiries. 【Specifications (partial)】 ■ Model number: 562060 ■ External dimensions: 523×365×305mm ■ Internal dimensions: 487×330×292mm ■ Effective internal dimensions: 485×329×286mm ■ Compressive load: 9.02kN (920kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Banjū M-3" is a deep type from the Banjū M series. - It has excellent bottom surface strength. - The bottom surface is designed with a raised center to prevent it from bending and contacting the contents of the lower stacked layer. - To improve washability, the base of the bottom ribs is designed with a large radius shape. - Label peeling ribs are installed on both short sides. - A printing area of 398×100 is provided on the long side. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Model number: 202473 ■ External dimensions: 572×388×138mm ■ Internal dimensions: 535×348×127mm ■ Effective internal dimensions: 531×344×118mm ■ Compressive load: 24.15kN (2462kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Santenna B#29T" is a stacking type container for natto fermentation and aging. <Features> - It can store 7×4 rows of 96mm natto packs in two tiers. - Ventilation is ensured with side cutouts and a full mesh design. - The mesh on the sides is positioned to avoid the flange position of the packs, preventing packs from protruding and direct airflow from entering through gaps. - A wave-shaped handle that is easy to grip is installed at the central flange on the short side. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 102957 ■External dimensions: 707×464×117mm ■Internal dimensions: 672×423×103mm ■Effective internal dimensions: 670×417×95mm ■Compression load: 26.0kN (2650kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Sambox #22-5 Middle Divider L, S" is a middle divider for the "Sambox #22-5." <Features> - It can divide the box into 2, 3, 4, 6, 8, 9, or 12 sections. - Being transparent, it offers excellent visibility of the contents. - It fits into the grooves on the bottom surface of the box to prevent shifting inside the box. - Even if the main body of the box is raised at the bottom, the divider is designed to be low enough not to protrude from the flange. Please feel free to consult us when you need assistance. 【Specifications】 ■Model Number: 804159 (L), 804160 (S) ■External Dimensions: 383×239×7mm (L), 261×239×6mm (S) ■Color: Transparent *The color is a reference sample and may differ from the actual product. ■Material: Special Resin ■Shipping Unit: 50 *Additional shipping charges will apply for orders below the displayed quantity. ■Compatible Product: Sambox #22-5 *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Until now, there has been no lid with a Sunlock for the Sanbox #36-3 series. We have newly added a lid equipped with the Sunlock Type 13 to our lineup. The Sunlock Type 13 is rotary, offering good operability, and it will not come off due to wind or vibrations. Since the lock does not protrude from the outer dimensions of the lid when locked, it is less likely to be damaged by collisions with adjacent containers. Additionally, there is no risk of the lock getting caught, which improves work efficiency during tasks such as pallet stacking. <Other Features> - A notch for banding is provided in the center of the short side (this notch is flush with the top surface of the lid). - Stacking of the lid alone is possible. *It is also available for sale without a lock. (Part number: 701856-00) Please feel free to consult us when you need assistance. 【Specifications】 ■Part number: 701856-01 ■Outer dimensions: 559×375×29mm ■Lock: Sunlock Type 13 L/R *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Sambox #14G" has a total of 34 heat dissipation holes (φ8) on its four sides, making it suitable for storing items that retain heat. The holes allow heat to escape, preventing condensation. <Other Features> - Excellent bottom strength, suitable for storing heavy items. - Bag-like handles are installed on both short sides, providing excellent handling. 【Specifications (Partial)】 ■Model Number: 201486 ■External Dimensions: 475×369×118mm ■Internal Dimensions: 421×321×108mm ■Effective Internal Dimensions: 412×313×98mm ■Card Slot Installation: Both short sides for 12-M type, 12-S type, 13-S type, 69 type, 85 type *For more details, please refer to the PDF document or feel free to contact us.

• palette

<Features> - Approximately 9% weight reduction from SN Container C#29FC This will reduce CO2 emissions by about 1 ton per year with the same operations as before. (Note: This figure is based on our calculation method and does not guarantee results.) Please feel free to contact us when you need assistance. 【Specifications (Partial)】 ■Model Number: 102958 ■External Dimensions: 559×452×151mm ■Internal Dimensions: 513×406×143mm ■Effective Internal Dimensions: 498×391×134mm ■Compression Load: 12.75kN (1300kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The SN Container C#10YA is a stacking type SN container in the same color, suitable for transporting food such as bento and side dishes. <Features> - It is a shallow type of 63mm from the "SN Container C#18." It allows for mutual fitting. - All sides have holes, enabling visibility of the contents even when two rows of stacked containers are loaded. - The bag-like handles on the long and short sides allow for stable handling. - There is a textured surface for label peeling on both short sides, the entire top surface of the flange, and part of the inner surface. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■Model number: 101004 ■External dimensions: 528×314×89mm ■Internal dimensions: 478×276×80mm ■Effective internal dimensions: 457×260×70mm ■Compression load: 13.23kN (1350kgf) *For more details, please refer to the PDF document or feel free to contact us.

• container

The Sankuretto Oricon 96B-B is a lid-equipped Oricon compatible with auto-travelers. <Features compatible with auto-travelers> ● Flat outer surface on short side panels The flat outer shape allows for automatic label application by the auto-traveler. ● Textured surface on short side panels The flat surface of the short side panels features a textured surface with high label release properties, minimizing dirt caused by label adhesive residue. <Other features> - Easy-to-handle foldable handles - Lid: with slide lock. - Sealable lid with Insulock - Sealable lid with Sun Fastener Type 3 (optional) *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Oricon M Series" is a new series from Oricon. <Features of the M Series> ● The arched handle fits comfortably in the hand The arched design provides an easy-to-handle shape that fits the hand. Unlike handles with holes, there is no concern about foreign substances entering through the holes or contents spilling out. ● Dust accumulation is minimized The sides feature a simple design with few ribs, making it difficult for dust to accumulate and easy to clean. ● Labels are easy to remove The sides have easy-to-remove textured surfaces for labels on all four edges and two short edges of the top frame. <Product Lineup> ■ Oricon M30B ■ Oricon M39B ■ Oricon M50B ■ Oricon M60B ■ SunClet Oricon M30B ■ SunClet Oricon M39B ■ SunClet Oricon M50B ■ SunClet Oricon M60B *For more details, please refer to the PDF document or feel free to contact us.

• container

The "TL Plastic Shelf 9045-S" is a plastic shelf with a shelf spacing of 171mm. By adopting a special ultra-reinforced polypropylene, it has successfully achieved a thinner shelf while maintaining strength, resulting in a stylish plastic shelf like never before. This is a product with a different shelf spacing than the existing product "TL Plastic Shelf 9045." You can choose a shelf size that suits your needs. (Since the shelf boards are common, combinations are also possible.) ● TL Plastic Shelf 9045 Shelf spacing: 401mm ● TL Plastic Shelf 9045-S Shelf spacing: 171mm Assembly requires no tools and can be easily set up by simply inserting the parts. Additionally, the leg parts are locked to the shelf board, so they won't come off when lifted. They can also be easily removed. Being lightweight, it places less burden on installation and movement, allowing for flexible layout options. When storing, the leg parts can be stored on the underside of the shelf board, eliminating the need for separate management and allowing for compact storage. The storage of the leg parts can also be easily done with one hand. *For more details, please refer to the PDF document or feel free to contact us.

• Office furniture

This is a top frame in size 1114, reinforced with tough light technology, offering exceptional rigidity. Made from specially ultra-reinforced PP, it achieves approximately four times the strength compared to conventional products. Its excellent rigidity allows for stable transportation, maintaining the quality of the cargo. Other features: - It has drainage holes (φ6~φ8) that allow for drainage from one side during cleaning. - The shape is designed to minimize shifting when stacked. - Cutouts for banding are provided on the long and short sides. Please feel free to consult us when you need assistance. *For more details, please refer to the related links or feel free to contact us.*

• palette

The "Palette LX-1114R2-5" is a mesh-type pallet suitable for air release when stacking FIBC (Flexible Intermediate Bulk Container) on pallets. Due to its mesh underside, air trapped inside the FIBC can easily escape, allowing for stable stacking. The surface is designed to be flat to prevent dirt from adhering to the bottom of the FIBC. Please feel free to consult us when you need assistance. 【Specifications】 ■ External dimensions: 1400×1100×150mm ■ Color: Blue ■ Weight: 32.2kg ■ Shipping unit: 2 ■ Model: Two-way entry, double-sided use type *For more details, please refer to the related links or feel free to contact us.

• palette

The "TL Compalletter F#830B" is a reinforced bottom type of the "TL Compalletter F#830." <Features> - Exceptional bottom strength Compared to the "TL Compalletter F#830," the bottom deflection strength has increased by 1.6 times. - Casters are directly attached to the bottom No processing of the main body is required when installing the casters! By purchasing only the components, customers can easily attach the casters themselves. 【TL Compalletter Series】 ● High strength: Exceeds the strength of metal products ● Lightweight: Approximately 20% lighter than metal while maintaining high rigidity. The reduction in weight helps to lower CO2 emissions during transportation. ● Hygienic: No rust formation, maintaining the quality of the contents. ● Space-saving: Each part folds inward, eliminating the need for extra space. ● Scratch prevention: Made entirely of plastic, making it less likely to scratch floors and preserving aesthetics. ● Stable stacking: Stacking strength is twice that of metal. Safe and stable stacking is possible. ● User-friendly: Doors that can be partially opened are installed on both long sides, making it easy to load and unload contents. *For more details, please refer to the PDF document or feel free to contact us.

• palette

This is a container commonly referred to as "Fune," used for mixing wall materials and concrete. It combines quality, strength, and ease of use. Currently, we offer a lineup of six sizes. ● Lineup and Specifications 'Tough Fune 25' External dimensions: 630×370×140mm Effective internal dimensions: 630×370×140mm Capacity: 23.6ℓ 'Tough Fune 40' External dimensions: 616×467×185mm Effective internal dimensions: 630×370×140mm Capacity: 35.2ℓ 'Tough Fune 60' External dimensions: 862×521×206mm Effective internal dimensions: 630×370×140mm Capacity: 67.7ℓ 'Tough Fune 80' External dimensions: 924×616×210mm Effective internal dimensions: 630×370×140mm Capacity: 85.0ℓ 'Tough Fune 140' External dimensions: 1232×766×207mm Effective internal dimensions: 630×370×140mm Capacity: 136ℓ 'Tough Fune 200' External dimensions: 1364×902×207mm Effective internal dimensions: 630×370×140mm Capacity: 188.0ℓ *For more details, please contact us.

• Other consumables

The mesh container with a handle, "Santainer," allows for stacking while keeping the contents stored by folding the handle inward. If the handle is folded outward for nesting, it can be stored compactly. Made of hygienic plastic, it is suitable for washing and storing food. ● Product Lineup "Santainer A#50N" - Standard lineup of 6 colors 【Specifications】 External dimensions: 578×390×283mm Effective internal dimensions: 479×295×249mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#85-2" - Standard lineup of 6 colors 【Specifications】 External dimensions: 720×475×338mm Effective internal dimensions: 614×375×292mm Standard colors: Light Blue, Yellow, Red, Green, Pink, Cream "Santainer A#120-2" - Standard lineup of 3 colors 【Specifications】 External dimensions: 808×553×370mm Effective internal dimensions: 692×447×302mm Standard colors: Light Blue, Yellow, Orange *For color variations, please refer to the separate PDF brochure.

• container

We have developed a number of groundbreaking logistics devices that turn our customers' requests into reality. We are actively advancing product development to meet the specifications and demands unique to increasingly diverse and complex industries. 【Featured New Products】 ● 'TL Palette S2-1012' with a wide insertion opening unique to Toughlight pallets. The 398mm wide opening allows for smooth use of forks and hand lifts. ● 'Oricon EP43A' for 15kg apples, designed with a storage guideline at the entrance to enhance the efficiency of apple harvesting and maintain quality! 【List of New Products (Excerpt)】 ● Lightweight type for film transport that is resistant to load breakage: 'Palette D4-712' ● 'Oricon P30B-S' with a flat inner surface that minimizes damage to contents ● Half-height version of the flat C-50B: 'Petanko O-27B' ● Perfectly sized for 1111 size pallets: 'Oricon EP34B' ● 1111 size flat surface divided into two: 'SN Container B#94' ● 'SN Container C#30M' with a mechanism to prevent card lifting For more details, please refer to the brochure!

• container

The "Palette D4-712" is a lightweight pallet for film loading that offers excellent loading efficiency and is resistant to load breakage. ● Excellent loading efficiency ■ 40ft container Can store 30 sheets in a 10×3 grid on the flat surface Loading efficiency: 89.4% *Calculated from the flat surface size of a 40ft container: 2350×12000mm ■ 4-ton wing truck Can store 15 sheets in a 5×3 grid on the flat surface Loading efficiency: 97.4% *Calculated from the flat surface size of a 4-ton wing truck: 2120×6100mm ● Strong against load breakage By optimizing the thickness of each rib connecting the beams, we achieve lightweight construction while ensuring the necessary strength. This pallet is resistant to load breakage. 【Specifications (excerpt)】 ■ External dimensions: 700×1200×140mm ■ Weight: 8.0kg ■ Color: Black ■ Shipping unit: 2 *For more details, please refer to the related links or feel free to contact us.

• palette

The "Palette D4-113117" is an export pallet that excels in loading efficiency for 40ft shipping containers. With a high transport efficiency of 93.8%, it helps reduce transportation costs. It is a pallet designed for overseas one-way use with a size of 10 modules. It can be used with hand lifts. It features anti-slip grooves for securing loads with PP bands, etc. (a total of 8 locations on the outer side of the insertion points). The 5mm recess helps prevent significant shifting of the bands during transport and reduces wear caused by contact with adjacent pallets. • Load Capacity Static Load: 4000kg Dynamic Load: 1000kg *When measures against load collapse are in place 【Specifications (excerpt)】 ■External Dimensions: 1130×1170×120mm ■Weight: 8.9kg ■Color: Black ■Shipping Unit: 2 *For more details, please refer to the related links or feel free to contact us.

• palette

The "Oricon P30B-S" is a folding container with a flat interior design that minimizes the risk of damaging its contents. The interior has no ribs or protrusions, so there is no risk of snagging or tearing even when storing individually packaged items. Additionally, it is easy to clean and maintain cleanliness. There are label peel-off textured surfaces at both ends of the upper frame on the short sides and in the center of the short sides, which reduce adhesive residue from labels, making it easier to clean and keep hygienic. 【Specifications (excerpt)】 ■ External dimensions: 530×366×205mm ■ Internal dimensions: 492×334×194mm ■ Effective internal dimensions: 492×333×187mm ■ Folding height: 67mm ■ Capacity: 31.8L *For more details, please refer to the related links or feel free to contact us.

• container

The "Petanko O-27B" is a foldable container made entirely of plastic. It has a half-height size that matches the height of the Petanko C-50B when stacked in two layers. It is also compatible for interlocking, allowing you to choose the size that suits your contents, helping to improve transportation efficiency and reduce costs. The four sides and both ends of the upper frame have a textured surface for label removal, which minimizes adhesive residue from labels and allows for hygienic use. 【Specifications (excerpt)】 ■ External dimensions: 530×366×172mm ■ Internal dimensions: 494×336×166mm ■ Effective internal dimensions: 493×335×158mm ■ Folded height: 56mm ■ Capacity: 27.4L *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon EP43A" is a collapsible container designed for 15kg of apples with an inward-tilting structure. It is sized to fit perfectly on various apple pallets (such as R2-096130 and R2-1313) and can be used similarly to apple containers. Due to its stacking method, it allows for stable loading. A "notch" for storage guidance is installed on the flange (opening), and by storing up to this guideline, it can hold approximately 15kg of apples without damaging them during stacking. 【Specifications (excerpt)】 ■ External dimensions: 640×320×268mm ■ Internal dimensions: 600×280×255mm ■ Effective internal dimensions: 600×280×247mm ■ Folding height: 81mm ■ Capacity: 42.8L *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon EP34B" is a folding container that can be perfectly stacked in a 2×3 arrangement on a 1111 size pallet. It allows for efficient pallet loading with no wasted space, ensuring high transportation efficiency. Due to its shallow design with a height of 40mm less than the "Oricon EP41B-2," it can be used in conjunction with each other, allowing you to choose the appropriate size for the contents and improve transportation efficiency. Additionally, the textured surface for label removal in the center of both short sides reduces adhesive residue from labels, allowing for clean use. 【Specifications (excerpt)】 ■ External dimensions: 550×366×210mm ■ Internal dimensions: 515×331×198mm ■ Effective internal dimensions: 515×330×188mm ■ Folding height: 75mm ■ Capacity: 33.7L *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon EP77B" is an Oricon designed for storing food and miscellaneous goods. It is sized to accommodate two standard beverage cases in parallel. Additionally, it can be equipped with a middle partition that can divide the interior into a maximum of eight sections. (Please consult us for arrangements regarding the middle partition.) 【Specifications (excerpt)】 ■ External dimensions: 597×470×330mm ■ Internal dimensions: 562×435×317mm ■ Effective internal dimensions: 562×435×309mm ■ Folded height: 80mm ■ Capacity: 77.4L *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon EP89B" is an Oricon with various features due to the "flap" installed at the opening. - Increased strength of the opening The flap helps to suppress deformation of the long sides and overall twisting, making the sliding stack (the process of stacking containers by sliding the upper container over the opening of the lower container) during stacking easier, thus enhancing stacking workability. - Locking during assembly The flap also serves as a lock during assembly. By folding down the flap, it locks, and by raising the flap, it enters an unlocked state. The short sides have a self-supporting mechanism, so simply raising the flap (unlocking) does not cause it to fall over, allowing you to remove contents from above while the flap is raised. *For more details, please refer to the related links or feel free to contact us.

• container

The "Oricon Rack EP89B (without short side door)" is an Oricon rack with a large opening on the side. During picking and restocking operations, products can be taken in and out from the side while the Oricon is stacked (eliminating the need for loading and unloading the Oricon). Side opening dimensions: 245×420mm Additionally, the "flap" installed at the opening provides various features. - Increased strength at the opening The flap helps to prevent deformation of the long side and overall twisting, making it easier to perform slide stacking (the process of sliding the upper container over the opening of the lower container during stacking), thus enhancing stacking efficiency. - Locking during assembly The flap also serves as a lock during assembly. By lowering the flap, it locks, and by raising the flap, it unlocks. The short side has a self-supporting mechanism, so it will not fall over just by raising the flap (unlocking), allowing you to retrieve contents from above while the flap is in the raised position. *For more details, please refer to the related links or feel free to contact us.

• container

The grooves installed on the inner side allow for the installation of dedicated partition boards. By installing the partition boards, the interior of the box can be divided into 2 or 3 sections vertically, enabling the transportation of different products together. Depending on the direction (front or back) in which the partition boards are installed, you can switch between 3-way and 2-way divisions. A recess is provided at the center of the long side of the inner box, allowing fingers to fit in, making it easier to remove the installed partition boards. Handles are provided at the corners of the lower part of the long side, facilitating lifting tasks for two-person operations. 【Specifications (excerpt)】 ■ External dimensions: 1045×570×417mm ■ Internal dimensions: 1011×530×400mm ■ Effective internal dimensions: 1005×529×392mm ■ Folding height: 82mm ■ Capacity: 214L ■ Delivery time: 3 days *For more details, please refer to the related links or feel free to contact us.

• container

The "Partition Plate Set for Oricon EP210B-B" is a dedicated partition plate for the "Oricon EP210B-B." It can divide the "Oricon EP210B-B" into 2 or 3 sections vertically. Depending on the orientation (front and back) of the partition plate, it can be used for either 2-way or 3-way division. It is composed of a twin cone (5mm) on the plate surface and frame parts, making it lightweight and easy to handle. 【Specifications】 ■ Size: 1006×553×9mm ■ Color: Orange/White ■ Compatible product: Oricon EP210B-B ■ Notes: Single cone mm used *For more details, please refer to the related links or feel free to contact us.

• container