三甲 List of Products and Services

The "Slim Sign Stand" is a plastic construction sign that is lightweight due to its blow-molded body, making installation easy. Additionally, it has no sharp corners, allowing for safe use. The sign can be easily installed and replaced by inserting it from the top. After removing the fixed parts, the sign can be lifted by pushing it from the hole on the back, making it easier to take out. 【Features】 ■ Compatible with sign sizes of 275×1400mm ■ Easy installation by sliding the sign ■ Easy removal of the sign ■ The body is lightweight due to blow molding, making installation easy ■ Made from a material that is resistant to damage even in cold climates *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "550 Sign Stand" is a plastic construction sign that is lightweight due to its blow-molded body, making installation easy. Additionally, it has no sharp corners, allowing for safe use. The sign can be easily installed and replaced by inserting it from the top. After removing the fixed parts, the sign can be lifted by pushing it from the hole on the back, making it easier to take out. 【Features】 ■ Compatible with sign sizes of 550×1400mm ■ Easy installation by sliding the sign ■ Sign removal is straightforward ■ The body is lightweight due to blow molding, making installation easy ■ Made from materials that are resistant to damage even in cold climates *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "Corn Wappa" is a specialized display device for heavy cones that allows for two-directional warning signs simply by covering the cone. Display devices placed on the top of cones, like signboards, can be affected by the wind, which may cause the cone to topple in the worst case. However, the "Corn Wappa" is designed to be placed over the cone, making it less susceptible to wind effects and less likely to fall over. The display space measures 70×320mm on one side, allowing for large text display and excellent visibility. If you have a label writer, you can freely create warning signs, and the smooth surface of the display area makes it easy to apply stickers neatly. It can be stored stacked, saving space. Custom orders for glow-in-the-dark types are also available. 【Features】 ■ Allows for two-directional warning signs on cones ■ Less affected by wind due to its design that covers the cone ■ Easy to create warning signs with a label writer, and easy to apply ■ Can be stored stacked, saving space *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Our company offers "display racks." When stacked, they are secured by three locking claws, allowing for a stable display. They can be attached and detached without any tools. Additionally, optional casters can be installed, and with the two-wheel stopper, it helps prevent accidental incidents. 【Features】 ■ Suitable for stacking ■ Stable stacking ■ Equipped with a promotional POP attachment mechanism ■ Excellent durability ■ Easy to recycle due to single material *For more details, please refer to the PDF document or feel free to contact us.

• container

We handle the "Display Oricon 6416." It is a wood-grain display stand for store displays, which can be easily folded with a one-touch lock. It can be used in combination with the "black display Oricon." In addition to being able to stack this product and display items on top, it is also possible to store items inside for display. 【Features】 ■ Wood-grain display stand ■ Easy folding with one-touch lock ■ Can be stacked and displayed on top ■ Can also be displayed by storing items inside (weight limit of 15kg) ■ Stable stacking possible on both the top and bottom *For more details, please refer to the PDF document or feel free to contact us.

• container

This is a large outdoor dust box designed for separating cans, bottles, and PET bottles, which can be installed next to vending machines. 【Product Lineup】 ● Sankleen Box Type 1 A (Mesh) 160 liters ● Sankleen Box Type 1 B (Flat) 160 liters ● Sankleen Box Type 2 (Flat) 95 liters Each type comes with three lid options: "No inner lid," "Rotating lid," and "Empty can lid (with two openings)." Additionally, we offer leg parts as an option for the Sankleen Box Type 1. *For more details, please feel free to contact us.

• Other cleaning tools

The newly developed locking mechanism allows you to lock the lid simply by placing it on the main body. Unlocking can also be done with one touch, allowing you to release it in a single motion while opening the lid. The lid can be opened and closed with one touch, significantly improving work efficiency. 【Compatible products】Sunbox #8-6, #12-6, #22-5 *For more details, please feel free to contact us.

• container

The lid and body feature a swivel lock mechanism. By using a swivel mechanism, it can be securely locked with light force, and the ease of operation during release is also excellent. When locked, it does not protrude beyond the external dimensions of the body. Therefore, during pallet loading, it can be stacked tightly and compactly side by side, eliminating interference and damage caused by locks, thus achieving both efficiency and safety. The standard colors for the lid are available in three options (blue, green, orange). This allows for management of contents by color. *For more details, please feel free to contact us.*

• container

This is an all-plastic shelf made using our unique special ultra-reinforced polypropylene. Assembly requires no tools and can be easily set up by simply inserting each part. Additionally, the leg parts are locked to the shelf boards, so they won't come off even when lifted. They can also be easily removed. Being lightweight, it reduces the burden of installation and movement, allowing for flexible layout options. When storing, the leg parts can be stored on the underside of the shelf boards, eliminating the need for separate management and allowing for compact storage. The storage of the leg parts can also be easily done with one hand. By adopting special ultra-reinforced polypropylene, we have succeeded in reducing the thickness of the shelf boards while maintaining strength. Compared to our conventional products, the storage space of the shelf has increased by 31mm in height, allowing for more items to be stored. 【Specifications】 ■ Weight: 17.5kg ■ Load capacity: 70kg (uniform load, with deflection occurring within 20mm) ■ Set components: 5 shelf boards, 16 leg parts *For more details, please feel free to contact us.

• Storage

The "Sankarry 6839" is a versatile platform cart. It is available in a total of six colors: black, blue, light gray, green, red, and yellow. The color of the cart allows for the management of loaded items, enhancing management efficiency with high visibility. Additionally, it features a mechanism for connecting both vertically and horizontally. It can be connected with a single touch without tools and can be expanded according to the loaded items. It is a "boltless" type that does not use bolts or nuts for securing the casters, allowing for quick removal during caster replacement without the need for tools. It can be easily detached and reattached during replacement due to damage or recycling. 【Features】 ■ Versatile platform cart ■ Can be connected vertically and horizontally ■ Casters can be attached without bolts or nuts ■ Quick removal during caster replacement without the use of tools *For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Two-Tone Cone" is a colorful plastic cone (pylon) that is divided into upper and lower parts. ● With the two-part split design, it is possible to deliver 10 cones with the volume of 6 cones (size 160). By splitting the volume of 6 regular colorful cones (size 160 for route delivery) into upper and lower parts and storing them within the parts, it is almost the same volume as 10 Two-Tone Cones. This results in a freight efficiency of about 1.7 times, achieving a reduction in transportation costs. Disassembly and assembly do not require any tools; the parts are combined using the elasticity of the plastic, and under normal usage conditions, the parts will not come apart. ● You can create color combinations that suit different scenes, making them highly visible. We offer 11 color variations for each part. When combined with the upper and lower parts, there are a total of 121 patterns, allowing you to create cones that match various events and brands. *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety equipment

The "Sankarry 5337-5" is a platform cart that perfectly accommodates the Oricon 50L series (flat dimensions 530×366mm). The body is color-coded in blue and light blue, providing excellent visibility for direction. The light blue side is open, allowing for sliding loading and unloading of the Oricon from there. With a loading surface height of 153mm, it is easy to move and load onto pallets that are 150mm thick. Additionally, loading from the pallet to the cart is smooth due to the tapered shape of the cart's opening. This enables speedy and safe loading and unloading of goods, improving labor efficiency and movement. Since it has the same external dimensions as our Oricon 50L series, there is no wasted space when loading Oricons, allowing for effective use of storage areas. 【Features】 ■ Platform cart for the Oricon 50L series ■ Color-coded in two colors, making the open side easily identifiable ■ Loading surface height is equivalent to that of pallets, allowing for sliding loading and unloading ■ Same external dimensions as the Oricon 50L, preventing wasted space *For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Handcar SS Mesh" is a push cart with a foldable handle. 【Features】 ■ The deck surface has an aesthetically pleasing mesh structure that excels in drainage during cleaning and reduces noise during movement. ■ Cutouts on the sides of the deck surface allow for rubber bands or nets to be hooked, ensuring safe transport of goods. ■ The handle can be folded down to stand upright, allowing for safe storage in narrow spaces. ■ The foot pedal used for folding the handle is crank-shaped, making it easy to lift the front by stepping on the deck surface, and the design facilitates overcoming obstacles. ■ A round handle hole is located in the center of the deck surface, making it gentle on the hands and easy to hold. ■ Anti-slip grommets are arranged radially around the deck surface handle, effectively preventing slipping. ■ Cushioning material is installed on the deck surface, allowing the handle to be folded quietly. ■ It is bolt-free, enabling caster replacement without tools. ■ Optional pedal brakes and bumpers are available. *For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Hand Car SM Mesh" is a hand-pushed cart with a folding handle. 【Features】 ■ The deck surface has an excellent design with a mesh structure, providing superior drainage during cleaning and reducing noise during movement. ■ The foot pedal used for folding the handle is crank-shaped, making it easy to perform a front lift by placing your foot on the deck surface, facilitating the overcoming of obstacles. ■ A round handle hole is located in the center of the deck surface, making it gentle on the hands and easy to hold. ■ Anti-slip grommets are arranged radially around the deck surface handle, effectively preventing slipping. ■ Cushioning material is installed on the deck surface, allowing the handle to be folded quietly. ■ It is bolt-free, allowing for caster replacement without tools. ■ Optional pedal brakes and bumpers are available. * For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Handcar SM Mesh" is a hand-pushed cart with a fixed handle. 【Features】 ■ The deck surface has an excellent design with a mesh structure, providing excellent drainage during cleaning and reducing noise during movement. ■ A round handle hole is installed in the center of the deck surface, making it gentle on the hands and easy to hold. ■ Anti-slip grommets are arranged radially around the handle on the deck surface, effectively preventing slipping. ■ It is boltless, allowing for caster replacement without tools. ■ Optional pedal brakes and bumpers are available. *For more details, please refer to the related links or feel free to contact us.

• Trolley

The "Oricon Rack P76B (with short side door) -B" is a foldable container that can be used as a stacked rack. When not in use, it can be folded and stored compactly. 【Features】 ■ Equipped with a detachable door on one short side, allowing the Oricon to be used as a stacked rack. ■ The door can be easily removed with a one-touch lock. The frame of the opening is smooth, making it difficult for contents to get caught, allowing for smooth access in and out.

• container

The "Oricon Rack 50B (with short side door) - B" is a foldable container that can be used as a stacked rack. When not in use, it can be folded and stored compactly. 【Features】 - It has a rotating door on one short side, allowing the Oricon to be used as a stacked rack. - The door can be easily opened with a one-touch lock. It also locks simply by pushing it closed. - Its easy operation for opening and closing makes it useful in environments where frequent exchanges are necessary.

• container

The "Oricon Rack 50B (with long side door)" is a foldable container that can be used as a stacked rack. When not in use, it can be folded and stored compactly. 【Features】 - It has a middle-folding rotating door on one long side, allowing the Oricon to be used as a stacked rack. - The door can be easily removed with a one-touch lock. The frame of the opening is smooth, making it easy to insert and remove contents without snagging. *Oricons with "middle-folding rotating doors" are available in other sizes as well. Please feel free to contact us for more details.

• container

The "Oricon Rack 38B (with short side door)" is a foldable container that can be used as a stacked rack. When not in use, it can be folded and stored compactly. 【Features】 - It has a sliding door on one short side, allowing the Oricon to be used as a rack when stacked. Additionally, it can be used as a standalone picking container in a flow rack. - The opening is from the top frame, making it easy to retrieve tall storage items. - The door is made of polycarbonate, making it resistant to damage and providing high transparency for excellent visibility of the contents. *Oricons with "sliding doors" are available in other sizes as well. Please feel free to contact us for more details.

• container

The "Oricon Rack EP22BT (with short side doors)" is an inward-folding collapsible container that can be used for picking small parts and other items. When not in use, it can be folded and stored compactly. 【Features】 ■ It is equipped with a rotating door on one side of both short ends, allowing for the picking of contents from there. ■ The door is secured with a one-touch lock, making it easy to open by simply pressing down the lever. ■ Since doors are installed on both sides, it can be set up and used without regard to direction. *For more details, please feel free to contact us.

• container

The "Palette D4-1111-17" is an ultra-lightweight pallet suitable for one-way use, such as for exports. Being made entirely of plastic, it does not require fumigation treatment during export and is easy to recycle. Despite its ultra-lightweight design, it is a recommended pallet with a dynamic load capacity of 1000 kg (after anti-collapse measures), allowing it to be used just like before. (However, the recommended static load is 2000 kg.) The upper part of the fork entry is designed with a flat shape to reduce damage from fork tines during loading and unloading operations. There are a total of four openings for securing stretch film, one on each left corner beam of the sides. Additionally, there are two anti-slip grooves for PP bands or similar, located near each entry point, totaling eight locations. This allows for various packaging solutions to prevent collapse, thereby reducing work time and ensuring safe loading and unloading. The corners of each beam are beveled to help prevent bag breakage when stacking pallets on top of irregular items (especially paper bags). The sides are designed in a wing shape to protect the side printing. For more details, please refer to the PDF document or feel free to contact us.

• palette

The "Sankarry 5743" is a platform cart designed for the Sanbox #20-4. It fits the Sanbox #20-4 perfectly, allowing for stable movement, and it can also carry the Sanbox upside down. By stacking it upside down after use, it can be loaded into the washing machine in the same orientation, leading to improved work efficiency. By rotating the connecting rod and bringing it close to the cart you want to connect, it automatically connects. Semi-automatic connection is also possible even when the Sanbox is loaded. With a width of 455mm, it can be arranged in five rows on a 10-ton truck with a width of 2300 to 2350mm, enabling efficient delivery. (455mm × 5 rows = 2275mm) Stable stacking is possible, and it can be stored stacked when not in use. It features large handle holes on both long sides, providing excellent handling. The caster installation uses a unique boltless mechanism, allowing for the attachment and removal of casters without tools, making it easy and quick to replace in case of damage or to disassemble for recycling.

• Trolley

Our company handles logistics materials and has released many new products. We have added a variety of products to our lineup, including ultra-lightweight pallets that have evolved from the previous model, boxes and containers, intermediate shelves for cage trolleys, and spacers that increase container capacity. <Featured New Product "D4-1111-17"> A lightweight pallet sized 1100×1100 that achieves a weight reduction of 5.8 kg, improving transport efficiency and reducing the burden of movement. 【Examples of New Products】 "Palette R2-1113-3" features a large mesh shape for excellent drainage during cleaning. "Madcon Light C-75B-B" can use an auto traveler on a dual-use line with cardboard. "Suncret Oricon L38B" has a large embossed surface on the long side for flexible label application. "Petanko C-18B" is a shallow type Oricon with a height of 22 mm. "SNB20A Spacer AW2" increases the internal height of the container by 56 mm. "Cage Trolley Intermediate Shelf 6080" has a load capacity of 100 kg and is even lighter. "Plaprotect 540" can be equipped with RFID tags, reducing the burden of loss prevention and inventory management. *For more details, please refer to the materials.

• container

The "Granboard" is a resin-made board that can be installed as a simple pathway or space in construction sites or areas with poor ground conditions. Due to its large size of 900×750 mm, it can be installed and dismantled in a short time with fewer pieces. Additionally, it can be easily set up without the need for tools or additional materials for connection. The overlapping structure of the connection points makes it difficult for muddy water to splash up, and since the Granboards overlap and press down on each other, they are also resistant to being lifted by strong winds. The surface of the Granboard is equipped with anti-slip protrusions. The rectangular protrusions intersect at a fine pitch in 90-degree directions, providing anti-slip effectiveness in all directions. Being made entirely of plastic, it is easy to recycle. *Vehicles cannot enter. For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "Oricon P300B" is the largest Oricon in our lineup. The "Oricon P300B" can be assembled and folded just like a standard-sized Oricon. However, it incorporates features due to its large size. ● Folding After pushing the short side from the outside to disengage the latch, lift the unique "knob" located on the inside of the short side, and you can fold it by bending the long side. ● Assembly Similar to a standard-sized Oricon, simply lift the top frame and fit the short sides to complete the assembly. *Please check the following video for folding and assembly instructions. This product is large in size and designed to carry heavy items, so handles are installed at both ends of the long top panel (two locations each) to make it easier for two people to carry. In case the short side accidentally comes off, a hook for finger placement is installed on the outside of the short side to allow for easy reattachment from the outside. *For more details, please refer to the PDF document or feel free to contact us.

• container

The "Sheet Board 1215" is a resin-based sheet that can be easily leveled. It can be laid down in areas with poor footing, such as construction sites for single-family homes or event venues, allowing for safe walking and driving. Additionally, it is a sturdy, one-piece molded product that can also be used to cover material storage areas. 【Features】 ■ Lightweight It weighs about 1/4 or less compared to steel. ■ Durable Made from a one-piece press-molded resin, it is resistant to cracking and can easily return to its original shape even if deformed. ■ Environmental Conservation The material is made from 100% recycled raw materials, making it an eco-friendly product. ■ Safety Equipped with handles for easy handling. The surface features protrusions in a checker plate pattern to prevent slipping. 【Options】 ■ Fixing Components These are stakes that can be driven into the ground along with the sheet board to prevent shifting. ■ Connecting Components These are parts that allow the sheet boards to be connected side by side, minimizing gaps between them. 【Usage Precautions】 * It cannot be used as a bridge or as a sheet board for outriggers. * Turning or repeated driving with tracks, etc., will wear down the surface protrusions (peaks) and degrade performance. * Please use fixing components or connecting components to prevent shifting of the sheet boards. * When vehicles are driving over the sheet boards, please ensure they proceed at a slow speed.

• Other safety and hygiene products

The "Shikiban 0918" is a resin-based mat that can be easily used for leveling. It can be laid down in areas with poor footing, such as construction sites for single-family homes and event venues, allowing for safe walking and driving. Additionally, it is a durable, one-piece molded product, making it suitable for use as a material storage area. 【Features】 ■ Lightweight It weighs less than about 1/4 of that of steel. ■ Durable Made from a one-piece press-molded resin that is resistant to cracking and easily returns to its original shape even after deformation. ■ Environmental Conservation The material is made from 100% recycled raw materials, making it an eco-friendly product. ■ Safety Equipped with handles for easy handling. The surface has protrusions shaped like checker plates to prevent slipping. 【Options】 ■ Fixing Materials These are stakes that can be driven into the ground along with the mats to prevent shifting. ■ Connecting Materials These are components that allow the mats to be connected side by side, reducing gaps between them. 【Usage Precautions】 * It cannot be used as a bridge or as mats for outriggers. * Turning or repeated driving with tracks can wear down the surface protrusions (peaks), degrading performance. * Please use fixing materials or connecting materials to prevent shifting of the mats. * When vehicles are driving over the mats, please ensure they proceed at a slow speed.

• Other safety and hygiene products

The "Palette R2-1113-3" is a plastic pallet designed with a large mesh shape that considers water drainage during cleaning. It is the lightest in the industry at a size of R2-1113 (flat surface 1100×1300mm) weighing only 16.5 kg (as of April 2022). The area near the fork entry is flat to prevent damage from fork tines. It can be equipped with an RFID tag for pallet management. Label protection concaves (40×120×1mm) are installed at four diagonal points on the short side, and the entire perimeter is protected by a wing shape. A stretch film roll-up prevention mechanism is installed at all four corners. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Madocon Light C-75B-B" is an auto-traveler compatible box suitable for product delivery. The short sides are completely flat, allowing for dual use with cardboard and enabling automatic label application by the auto-traveler. The short sides feature a highly label-release surface with a textured finish, which helps prevent dirt from adhesive residue on the labels. It is a lightweight and slim type. The long side has a high-transparent window, providing excellent visibility of the contents. The lid is equipped with a simple locking mechanism using a slide lock. Additionally, the lid can be sealed with a plastic tie. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Sancret Oricon L38B" is a shallow type in the 40L class. It features a large embossed surface on the long side, providing a wide area for label application and preventing dirt from adhesive residue. The upper and lower parts of the long side have recessed shapes, allowing for the application of another label (without embossing). Due to the recessed shape, the label is protected from external contact. It has a two-part bottom design, allowing it to interlock (stack) with flat half-type Oricons (such as the flat C-18B). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Petanko C-18B" is a general-purpose shipping container with a lid. It is a flat half-size container in the general 50L class and can fit two units of the Suncret container L38B side by side. Label peel-off textured surfaces are installed on both short sides (partially flat) and on the lid to prevent dirt from adhesive residue on labels. The lid can be sealed with a plastic tie, and management locks using Sunlock are also possible. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "SNB20A Spacer AW" is a height-raising frame (spacer) specifically designed for the SN Container B#20A. It can be easily installed without tools by simply pushing it down from the top of the SN Container B#20A. It can be removed using tools such as a flathead screwdriver. *However, since it is not detachable, it cannot be used repeatedly. Even when installed on the SN Container B#20A, it allows for stacking and nesting just like a regular SN Container. Stacking is possible with the spacer alone. *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• container

The "Sambox #12-3B" is a container suitable for storing metal products that are coated with oil at high temperatures or for use as a transport box. The thickness of the bottom has been increased by 11.5mm compared to the existing Sambox #12-3, significantly reducing bottom deflection. Even when storing high-temperature metal products coated with oil, deflection is minimized, reducing line troubles. (This does not mean that deflection will not occur at all.) *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• container

The "Sambox #28-7" is a container for storing and transporting metal parts with oil residue. It has no vertical ribs on the sides and a smooth surface, making it easy to wipe off dirt. By increasing the bottom thickness of the existing Banjyu E by 4mm and installing diagonal lattice ribs, it achieves 3.2 times the bottom strength of Banjyu E. This minimizes deflection of the bottom surface and reduces line troubles. (Deflection does not occur completely.) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Econobox N Series" is a versatile transparent container with a buckle. 【Features】 It is lightweight and easy to handle, making it suitable for storing tools, household items, sports equipment, and more. A large buckle is used for locking the body and the lid. The part of the buckle where fingers grip has a large curved surface, allowing it to fit comfortably in the hand for easy handling. It can be stacked through the lid. #9N and #14N can also be stacked on top of #25N and #44N, allowing for a neat storage solution by combining different sizes for various contents. 【Lineup】 - Econobox #9N - Econobox #14N - Econobox #25N - Econobox #44N *All are sets of the body and lid. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Protector 540" and "Protector 540B" are returnable type plates (protectors) for film shipping. The "Protector 540" has a central tube diameter of 3 inches, while the "Protector 540B" has a central tube diameter of 6 inches. They can be easily distinguished by their different colors. RFID mounting mechanisms are installed at two corners. The introduction of RFID makes it easier to prevent loss and manage products, thereby improving management efficiency. Additionally, by installing it diagonally from the corners, it can be read without interference from radio waves even in a packed state. By incorporating a large radius at the banding section during packaging, it prevents wear and damage to the bands. Three sides, excluding the bottom, are equipped with fitting grooves, which function to stabilize stacking and prevent movement between adjacent products. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• container

The "Intermediate Shelf 6080 for Cage Trolley" is an intermediate shelf board that can be attached to a cage trolley of size 800×600. *Please confirm in advance whether it can be installed on the cage trolley you will be using. It is approximately 23% lighter than conventional products, improving work efficiency. Despite being lightweight, it maintains the same load capacity of 100kg as conventional products. It can be used just like the conventional models. *It is reinforced with two iron pipes. The shelf board features easy-to-hold handles on both sides that minimize strain. The handles have an oval cross-section and flat surfaces on the top and bottom for easy gripping. Additionally, there is a large opening in the center for easy carrying from any direction. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "P-type Seedling Tray for Young Seedlings" is a seedling tray with excellent strength. The side walls have a double-wall structure, providing high strength against twisting. To facilitate handling, notches are placed in the center of the short sides. The inner bottom surface is flat and has drainage holes (φ3.4mm x 78 holes). The material used is 100% recycled PP. *For more details, please refer to the documentation. Feel free to contact us as well.

• container

The "Sun Case K220" is a gift container for items such as soy sauce marinated salmon roe, salmon sashimi, and Matsumae-zuke. It features a sealing band system to prevent accidental opening or tampering. It cannot be opened without cutting the sealing band, ensuring excellent safety. (After opening, it can be used as a simple lid.) The sealing band can be cut from either direction. To make the contents easily visible, the lid is made of a highly transparent material. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• container

The "Pudding Cup 100" is a cup designed for pudding production that corresponds to the baking process of pudding (120°C). Thanks to the special shape of the flange part at the opening, it is easy to thermally seal the film during production (top seal) and also easy to peel off. For more details, please refer to the PDF document or feel free to contact us.

• container

The "Econ Tool Basket #30" is a sturdy basket with a handle that can be used for various purposes. The handle can be folded outward for nesting (storage). By folding the handle down and sliding it inward, it serves as a support for the basket, allowing for stacking on top of it. It can be stacked while containing items. The main body’s handle features a closely arranged rib structure, making it durable and easy to hold. Similarly, the handle is designed with a closely arranged rib structure and a rounded shape to enhance grip. Additionally, when both handles are held at once, the width is set at 40mm for easier gripping. For more details, please refer to the PDF document or feel free to contact us. Our company handles logistics materials and has released many new products.

• container

The flap-equipped "F-BOX" is an inward-folding corrugated container developed for KD (knockdown) logistics for import and export. 【Features】 When folded, it becomes as thin as a cardboard case, and by transitioning from one-way cardboard use to reusable logistics with corrugated containers, significant cost reductions and zero waste can be expected in the future. Thanks to our unique flap design, it is easier to stack on the container below compared to conventional products, improving stacking work efficiency. Additionally, the one-touch locking mechanism allows for smooth folding operations (except for some models). All F-BOX series can be stacked interchangeably. 【Flap-equipped "F-BOX" lineup】 - F-BOX112F - F-BOX113 - F-BOX122F - F-BOX123 - F-BOX132 - F-BOX222 - F-BOX224 *If you have any questions, please feel free to contact us.

• container

The "Econ Basket Oricon" is a handled storage box that can be used for my basket, office document storage, toy boxes, and more. 【Features】 Available in two sizes: 15 liters and 36 liters. The 15-liter size is perfect for laying A4 files flat and can be stored in a standard color box (width 42 × depth 30 mm). The 36-liter size can hold 7 pipe-style A4 files horizontally. Additionally, it can perfectly store 2 rows of A4 files laid flat. The handle has a rounded part that touches the hand, reducing strain and making it easy to carry. The sides are mesh, making it lightweight and providing excellent visibility of the contents. 【Lineup】 - Econ Basket Oricon #15 - Econ Basket Oricon #36 *If you have any questions, please feel free to contact us.

• container

Our plastic food packaging is produced in the latest specialized small food packaging factory, where all processes from molding to inspection, packaging, and quality control are conducted in a "Class 10,000" clean room. This level of cleanliness is comparable to that found in manufacturing environments for electronic components and optical machinery, making it a high standard for producing food containers. *“Class 10,000” indicates a cleanliness level where the number of particles larger than 0.5 micrometers is 10,000 or fewer per cubic foot of air. Our production facilities are located at 26 sites nationwide. We produce and ship from factories closer to our customers, ensuring faster delivery than anywhere else. Additionally, shorter transportation distances mean less CO2 emissions during transport, contributing to the establishment of a decarbonized society. [Food Packaging Series Lineup] ■ Opening band type (square and round) ■ Screw cap type ■ Top seal type ■ Transparent containers ■ Transparent containers with handles ■ Containers for fish roe and more *For more details, please contact us or download the catalog.

• container

Outstanding design awarded the "Good Design Award"! This excellent design addresses the burdens on workers caused by aging and population decline, which are challenges in the logistics industry today, through appropriate material selection and thoughtfully designed surface shapes. 【Judges' Evaluation Comments】 In the current social climate, where an increase in logistics is anticipated, this design materializes simple yet clear functionality that alleviates the human burden in related areas. It was praised for its panel system solution that understands the physical strength and workflow habits of mobile workers, while also minimizing investment and environmental burdens. Various functionalities have been pursued and consolidated, including rib shapes that facilitate easier sliding of loads, connection shapes that enhance workability, and innovations in materials and molding methods that achieve smoothness and robustness. It has been completed as a minimal design that realizes the increasingly necessary problem-solving performance. 【Features】 ● Can be moved with less than one-third of the load's weight ● Can be moved with the same force in any direction ● Excellent quietness during movement [Noise level 55-60dB (normal conversation level)] ● Compatible with forklift access ● Easy to connect

• Other conveying machines