藤川伝導機 List of Products and Services

This document provides information about the double-acting rod "100Z-1." In addition to internal structure diagrams such as the head cover cross-section, it also includes a list of packings made of nitrile rubber and hydrogenated nitrile rubber. Furthermore, parts lists for the cylinder tube, rod cover, head cover, and piston nut are also included. Please make use of this information. [Contents] ■ Internal structure diagrams ■ Packing list ■ Parts list *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

We would like to introduce the hydraulic cylinder for 3.5Mpa, '35H-3', handled by Fujikawa Denko Co., Ltd. The switch set is standardized from Φ32 to Φ100, and the magnetic proximity switch allows for the selection of small contact and non-contact types. The non-contact switch is a 2-wire, 2-light type, making it easy to set the appropriate position (green light on). Additionally, WR and WS type switches can also be installed (quasi-standard). 【Features】 ■ The switch set is standardized from Φ32 to Φ100 ■ The magnetic proximity switch allows for the selection of small contact and non-contact types ■ The non-contact switch is a 2-wire, 2-light type, making it easy to set the appropriate position (green light on) ■ WR and WS type switches can also be installed (quasi-standard) ■ The standard piston seal is a U packing ■ The cushioning mechanism uses a metal engagement method *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document provides information about the double-acting rod "35H-3." It includes internal structure diagrams for each inner diameter and a list of packings such as nitrile rubber and fluorine rubber. Additionally, it features a parts list for components including the cylinder tube, rod cover, head cover, piston, and piston rod. [Contents] ■ Internal structure diagrams ■ Packing list ■ Parts list *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

We would like to introduce the hydraulic cylinder with stroke adjustment for 7/14MPa, model '70/140H-8A2', which we handle. The stroke can be finely adjusted by the amount of threading of the stroke adjustment rod. The adjustment rod features a retention mechanism as a safety measure. Additionally, two types of stroke adjustment allowances are available: 5mm and 10mm. Even after adjustment, the cushion stroke is equal to or longer than the standard 70/140H-8. 【Features】 ■ Inner diameter from Φ32 to Φ160 ■ Fine adjustment of stroke possible by the amount of threading of the stroke adjustment rod ■ Adjustment rod features a retention mechanism as a safety measure ■ Two types of stroke adjustment allowances: 5mm and 10mm *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

The "70/140H-8R Series" is a hydraulic cylinder with a switch set for 7/14MPa specifications, expanding the inner diameter 160 switch specifications. The switch set simplifies equipment design and compacts the device. It allows for switch installation at any position and is easy to adjust. Additionally, adding position detection is possible simply by adding switches, and there is a wide variety of switch types available. It can accommodate diverse environments. 【Features】 ■ The first inner diameter φ160 magnetic proximity switch compatible hydraulic cylinder in the 70/140H-8R series ■ Simplifies equipment design and compacts the device through the switch set ■ Allows for switch installation at any position and is easy to adjust ■ Adding position detection is possible by simply adding switches *For more details, please download the PDF or feel free to contact us.

• cylinder

The "70/140H-8" is a double-acting hydraulic cylinder for 7/14 MPa, with a standard built-in high-performance cushion, suitable for inner diameters from Φ32 to Φ250. The high-performance cushion reduces shock during stopping, and the adoption of a newly designed cushion valve makes cushion adjustment easy. Additionally, the cushion valve incorporates a retention mechanism and a lock nut to prevent loosening as safety measures. 【Features】 ■ Inner diameter from Φ32 to Φ250 ■ Reduced shock during stopping due to high-performance cushion ■ Easier cushion adjustment with the adoption of a newly designed cushion valve *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document provides information about the double-acting rod "70/140H-8." It includes internal structure diagrams of A, B, and C rods, as well as a list of packings such as nitrile rubber and polyurethane rubber. Additionally, it features a parts list for components like cylinder tubes, rod covers, head covers, pistons, and piston rods. Please make use of it. [Contents] ■ Internal structure diagrams ■ Packing list ■ Parts list *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

The "100H-2" is a double-acting hydraulic cylinder designed for 10MPa with an inner diameter ranging from Φ32 to Φ125. It comes standard with a high-performance cushion. The adoption of a floating cushion enables smooth startup. Additionally, it complies with ISO10762 (JIS B8367-5) and uses ISO standard dimensions for the packing grooves in the sliding parts. 【Features】 ■ Inner diameter from Φ32 to Φ125 ■ Complies with ISO10762 (JIS B8367-5) ■ Smooth startup achieved through the use of a floating cushion ■ High-performance cushion included as standard ■ Packing grooves in sliding parts use ISO standard dimensions *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document provides information about the double-acting rod "100H-2." It includes detailed internal structure diagrams, as well as a packing list that allows you to check the names, materials, quantities, and types of parts at a glance. Please make use of this information when using the product. [Contents] - Internal structure diagram - Packing list *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

The "140-L1" is a powerful hydraulic cylinder with a tube flange fastening type, compatible with an inner diameter of Φ63 to Φ160 and a stroke of 2000 to 3000 mm, designed for 14 MPa. By adopting a high-performance cushion, the shock during stopping has been reduced, and the new design cushion valve has made cushion adjustment easier. Additionally, the cushion valve incorporates a retention mechanism and a lock nut to prevent loosening as safety measures. 【Features】 ■ Compatible with an inner diameter of Φ63 to Φ160 and a stroke of 2000 to 3000 mm ■ Reduced shock during stopping due to the adoption of a high-performance cushion ■ Easier cushion adjustment with the new design cushion valve ■ The cushion valve includes a retention mechanism and a lock nut to prevent loosening as safety measures *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document provides information regarding the double-acting rod "140L-1." The packing list includes a comprehensive overview of part names, materials, quantities, and part types, allowing for easy reference. Additionally, detailed internal structure diagrams and parts lists for components such as the cylinder tube are also included. Please make use of this information. [Contents Included] ■ Internal Structure Diagram ■ Packing List ■ Parts List *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

The "160H-1" is a double-acting hydraulic cylinder designed for 16MPa, utilizing ISO standards for the packing in the sliding part. By adopting a floating cushion, it achieves smooth startup. It comes standard with high-performance cushions. Additionally, it is lighter and more compact compared to the "140H-8" series, and it standardizes the inclusion of switches for all internal diameters from Φ32 to Φ160. 【Features】 ■ Complies with ISO 6020-2 (JIS B 8367-2) ■ Achieves smooth startup through the adoption of a floating cushion ■ Comes standard with high-performance cushions ■ Lighter and more compact compared to the "140H-8" series ■ Standardizes the inclusion of switches for all internal diameters from Φ32 to Φ160 ■ Utilizes ISO standards for the packing in the sliding part *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document summarizes information regarding the double-acting single rod "160H-1." The packing list includes part names, materials, quantities, and part types in a tabular format for easy reference. Additionally, detailed internal structure diagrams are also provided. Please make use of this information. 【Contents】 ■ Packing List ■ Double-acting Single Rod/Standard Type/B Rod/160H-1 ■ Double-acting Single Rod/Switch Set/B Rod/160H-1R ■ Double-acting Single Rod/Standard Type/B Rod/160H-1・160HW-1 ■ Double-acting Single Rod/Switch Set/B Rod/160H-1R・160HW-1R *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

The "210C-2" is a double-acting hydraulic cylinder for 21MPa that has become even more compact compared to the "210C-1." The cushioning performance has improved, increasing energy absorption, reducing shock during stopping, and allowing for cushion adjustment across all sizes. Additionally, the check valve performance has also been enhanced, enabling quick and smooth startup. 【Features】 ■ More compact compared to the "210C-1" ・The total length of the cylinder body is shortened by up to 23mm ■ Inner diameter Φ40 to Φ250 ■ Improved check valve performance ・Achieves quick and smooth startup *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

This document summarizes information regarding the double-acting rod "210C-2/210H-5." The "210C-2" includes internal structure diagrams for A and B rods, while the "210H-5" features diagrams for B rods and a packing list. Additionally, we have included parts lists for components such as the cylinder tube, rod cover, head cover, piston, and piston rod. [Contents Included] ■ Internal Structure Diagrams ■ Packing List ■ Parts List *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• cylinder

We would like to introduce the double-acting hydraulic cylinder '210H-5' for 21MPa that we handle. Compared to the '210H-3', it has become more compact, with the overall length of the cylinder body reduced by up to 39mm and the weight of the cylinder body reduced by up to 30kg. Additionally, the cushioning performance has improved, with increased energy absorption, reduced shock during stopping, and adjustable cushioning available for all sizes. 【Features】 ■ More compact compared to the 210H-3 ■ Inner diameter Φ40 to Φ160 ■ Improved cushioning performance ■ Enhanced check valve performance *For more details, please download the PDF or feel free to contact us.

• cylinder

In this document, we have compiled information regarding the double-acting rod type '210C-2/210H-5'. In addition to the cylinder tube, we have included parts such as rod covers, head covers, pistons, and piston rods. We also present a list of seals made from materials like nitrile rubber, polyurethane rubber, and fluororubber. Please feel free to download and take a look. 【Featured Products】 ■ Double-acting rod / Standard type / 210C-2 ■ Double-acting rod / Standard type / 210H-5 *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the "150HD-1 Series," a double-acting two-stage hydraulic cylinder for the mold industry, designed for 15MPa. After mold release, the structure allows for retraction using a small-diameter internal cylinder, enabling a reduction in cycle time. The internal volume of the cylinder can be minimized, resulting in lower flow rates and a more compact overall hydraulic system. Additionally, we offer two types of couplings and joints for connection, and it is also possible to have the connection part on the cylinder body in a male thread shape as an option. 【Features】 ■ Enables reduction in cycle time due to the structure that uses a small-diameter internal cylinder for retraction after mold release ■ Internal volume of the cylinder can be minimized ■ Results in lower flow rates and a more compact overall hydraulic system ■ Two types of couplings and joints are available for connection ■ Option to have the connection part on the cylinder body in a male thread shape *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the 16MPa short tie rod hydraulic cylinder '160ST-1' that we handle. This is a double-acting compact hydraulic cylinder for 16MPa with an inner diameter ranging from Φ32 to Φ250. Additionally, we offer sizes from Φ100 to Φ250 that were not available in the ST type of the "160S-1 series," significantly reducing delivery times with a lightweight, compact, and space-saving design. 【Features】 ■ Double-acting compact hydraulic cylinder for 16MPa with an inner diameter of Φ32 to Φ250 ■ Some compatibility with the thin type cylinder "160S-1 series" for installation ■ Space-saving comparable to thin cylinders, while accommodating strokes up to 300 ■ Sizes from Φ100 to Φ250 that were not available in the ST type of the "160S-1 series" ■ Significantly reduced delivery times with a lightweight, compact, and space-saving design *For more details, please download the PDF or feel free to contact us.

• cylinder

The "70/140M-3" is a hydraulic cylinder designed for installation and use on heavy machinery, including steelmaking machines, with an inner diameter ranging from Φ40 to Φ250. It is a powerful type effective against surge pressure, vibration, and shock, featuring high-performance hydraulic cylinder with meticulous attention to processing accuracy, surface treatment, and packing in various components. Additionally, it has an advanced technical design suitable for special applications and complies with the Japan Fluid Power Association standard JOHS-110. 【Features】 ■ Powerful type effective against surge pressure, vibration, and shock ■ High-performance hydraulic cylinder with meticulous attention to processing accuracy, surface treatment, and packing in various components ■ Advanced technical design suitable for special applications ■ Complies with the Japan Fluid Power Association standard JOHS-110 *For more details, please download the PDF or feel free to contact us.

• cylinder

This document summarizes information regarding the double-acting rod type "70/140M-3." It includes a parts list that specifies materials such as carbon steel for mechanical structures and rolled steel for general structures, along with component names like cylinder tubes and rod covers. Additionally, internal structure diagrams and a packing list are also provided, so please feel free to download and take a look. [Featured Products] ■ Double-acting rod / Standard type (Φ40–Φ140) ■ Double-acting rod / Standard type (Φ160–Φ250) *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our thin hydraulic cylinder for high-temperature specifications, 16MPa, 'HRST1'. This heat-resistant hydraulic cylinder can be used at ambient temperatures up to 150°C, and the switch set can accommodate up to 130°C by incorporating the heat-resistant switch SWO13. Additionally, the mounting pitch is the same as the general-purpose "160S-1 series," and the bearing and sealing parts use a special copper alloy and fluorine-based seals. 【Features】 ■ Heat-resistant hydraulic cylinder usable at ambient temperatures up to 150°C ■ Switch set can accommodate up to 130°C with the inclusion of the heat-resistant switch SWO13 ■ Available in a variety of support forms (SD, LD, FA, FB) with cylinder inner diameters from Φ32 to Φ80 ■ Mounting pitch is the same as the general-purpose "160S-1 series" ■ Bearing and sealing parts use a special copper alloy and fluorine-based seals *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our high-temperature hydraulic cylinder, the 'H8BT1'. This is a general-purpose tie rod hydraulic cylinder that can be used at high temperatures, featuring PTFE-based combination seals in the sliding parts. Additionally, it can be used up to 150°C without a switch and up to 130°C with a switch, and it supports a wide variety of the "70/140H-8 series." 【Features】 ■ Usable up to 150°C without a switch and up to 130°C with a switch ■ PTFE-based combination seals in the sliding parts ■ Compatible with a wide variety of the 70/140H-8 series *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our high-temperature specification hydraulic cylinder for 14MPa, the 'H8BT1/1R series'. It can be used up to 150°C in the standard type (without switch) and up to 130°C with the switch set (SW013 switch). Additionally, it employs PTFE-based combination seals in the sliding parts, allowing compatibility with the rich variety of the "70/140H-8 series." 【Features】 ■ Usable up to 150°C in the standard type (without switch) and up to 130°C with the switch set (SW013 switch) ■ PTFE-based combination seals are used in the sliding parts ■ Compatible with the rich variety of the "70/140H-8 series" *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our thin hydraulic cylinder for 3.5MPa, the '35SY-1R'. This product complies with TMS standards and uses hydrogenated nitrile rubber for the sealing material in the sliding parts. Additionally, the piston packing employs corner rings, and all models are equipped with built-in magnets, allowing for switch installation at a later time. 【Features】 ■ Complies with TMS standards ■ Uses hydrogenated nitrile rubber for the sealing material in the sliding parts ■ Employs corner rings for the piston packing ■ All models are equipped with built-in magnets, allowing for switch installation at a later time *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the double-acting hydraulic cylinder for 7/14MPa, model '70/140Y-2', which we handle. This product complies with TMS standards and has standardized specifications for cutting oil resistance. The minimum operating pressure is 0.3MPa or less on the head side and 0.45MPa or less on the rod side, and the cushioning mechanism uses a metal fitting method. 【Features】 ■ Complies with TMS standards ■ Standardized specifications for cutting oil resistance *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our 'GV/GVR Series' wheels and tires specifically designed for AGVs. With a high load capacity and a slim design suitable for AGV wheels, you can choose from three types of tires according to your application. Additionally, you can choose whether or not to include a base plate. Please feel free to contact us if you have any inquiries. 【Features】 ■ High load capacity ■ Slim design suitable for AGV wheels ■ Choice of three types of tires according to application ■ Option to include or exclude a base plate *For more details, please download the PDF or feel free to contact us.

• wheel

We would like to introduce the hydraulic cylinder with position detector for 3.5MPa, '35P-3', which we handle. This product allows for high-precision position control and detection when combined with computers or electronic counters. Additionally, it uses permanent magnets in the measuring roller for distance detection, enhancing measurement accuracy. 【Features】 ■ Achieves high-precision position control and detection when combined with computers or electronic counters ■ Uses permanent magnets in the measuring roller for distance detection, improving measurement accuracy ■ Resolution of 0.1mm/Pulse *For more details, please download the PDF or feel free to contact us.

• cylinder

This document summarizes information about the double-acting rod "35P-3." It includes a parts list detailing materials and quantities for components such as the cylinder tube, rod cover, head cover, and piston, as well as internal structure diagrams and a packing list. Additionally, it provides notes on precautions when installing the valve seal, so please make use of this information. [Featured Products] ■ Double-acting rod / Standard type ■ Double-acting rod / Switch set *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the hydraulic cylinder with position detector for 7/14MPa, model '70/140P-8', which we handle. By adopting a high-function cushion, the shock during stopping has been reduced, and with the new design of the cushion valve, cushion adjustment has become easier. Additionally, by using permanent magnets in the measuring roller for distance detection, it is possible to enhance measurement accuracy. 【Features】 ■ The adoption of a high-function cushion has reduced the shock during stopping. ■ The new design of the cushion valve has made cushion adjustment easier. ■ By combining with computers and electronic counters, high-precision position control and detection can be achieved. ■ The use of permanent magnets in the measuring roller for distance detection enhances measurement accuracy. ■ Resolution of 0.1mm/Pulse. *For more details, please download the PDF or feel free to contact us.

• cylinder

This document summarizes information about the double-acting rod "70/140P-8." It includes a parts list featuring components such as the cylinder tube, rod cover, head cover, and piston, as well as internal structure diagrams and packing lists. Additionally, it provides notes on precautions when installing valve seals, so please make use of this information. [Featured Products] ■ Double-acting rod / Standard type ■ Double-acting rod / Switch set *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "140MT-3" is a hydraulic cylinder with a position sensor that adopts an absolute method. Thanks to the position sensor utilizing the magnetostrictive phenomenon, high-precision absolute position detection is possible. There is no need for limit switches for origin setting, and no correction is required. Additionally, the temperature drift of the sensor probe alone is extremely small at ±50ppmFS/C, and stable output and high responsiveness are achieved by employing a high-speed sample-and-hold circuit. 【Features】 ■ High-precision absolute position detection is possible with a position sensor utilizing the magnetostrictive phenomenon ■ No need for limit switches for origin setting ■ Extremely small temperature drift of ±50ppmFS/C for the sensor probe alone ■ Stable output and high responsiveness are achieved ■ Excellent environmental resistance and durability ■ Compact design allows for easy installation in equipment *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our 16MPa position sensing thin hydraulic cylinder, 'PSR-1A'. Except for the sensor located on the head side, it has the same dimensions as the '160S-1' and can be used in strong magnetic fields where magnetic proximity switches cannot be used. Additionally, it accommodates inner diameters from Φ32 to Φ125 and strokes from 5 to 50 mm. 【Features】 ■ Compact position sensor that does not compromise the slim design of the cylinder ■ Same dimensions as '160S-1' except for the sensor on the head side ■ Usable in strong magnetic fields where magnetic proximity switches cannot be used ■ Inner diameter: Φ32 to Φ125, stroke: 5 to 50 mm ■ Rod tip: standard with male thread *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our 7/14MPa position sensing hydraulic cylinder, 'PTN-1B/PTH-1B'. With a position sensor that utilizes the magnetostrictive phenomenon, it enables high-precision absolute position detection. There is no need for a switch for origin setting, and no correction is required. Additionally, it can be standardly equipped with cushioning, allowing for safe use with general switching valves. 【Features】 ■ High-precision absolute position detection enabled by a position sensor utilizing the magnetostrictive phenomenon ■ No switch required for origin setting, and no correction needed ■ Compact design makes installation easy and space-efficient ■ Standard cushioning support allows for safe use with general switching valves ■ Compatible with a wide variety of the well-established 70/140H-8 series *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the 21MPa position sensing hydraulic cylinder "PTT-2B" that we handle. Compared to the "PTT-1B," it has become more compact, with the total length of the cylinder body shortened by up to 43mm. Additionally, high-precision absolute position detection is possible using a position sensor based on the magnetostrictive phenomenon, eliminating the need for a switch for origin setting. 【Features】 ■ High-precision absolute position detection using a position sensor based on the magnetostrictive phenomenon ■ No switch needed for origin setting ■ Compact design ■ Standard compatibility with cushioning *For more details, please download the PDF or feel free to contact us.

• cylinder

The "Atsukan Servo" is an electric hydraulic actuator that uses a bidirectional discharge hydraulic pump. By changing the discharge direction of the hydraulic pump, it can achieve the same control as a directional control valve, eliminating the need for a flow control valve. Furthermore, it has become possible to arbitrarily control the pressure of the hydraulic fluid through torque control. Additionally, it uses a very small amount of hydraulic fluid, and mineral-based oil, which makes waste oil disposal easy, can be used. 【Features】 ■ High thrust capability ■ Load holding capability ■ Space-saving stroke ■ No control valve required ■ Space-saving hydraulic tank *For more details, please download the PDF or feel free to contact us.

• Actuator
• Hydraulic Equipment

The "35RP2" is a rack and pinion type rotary actuator that is fully compatible in dimensions and mounting with the 35RP. Thanks to its unique backlash elimination mechanism, it has eliminated play at the rotation end. The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. Additionally, a magnet is standardly built into the piston section, allowing for the installation of a switch later on. 【Features】 ■ Five types of cylinder inner diameters ranging from φ32 to φ80, with three types of support forms: SD type, FA type, and FB type. ■ The unique backlash elimination mechanism has removed play at the rotation end. ■ The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. ■ The switch is standardized to the highly versatile magnetic proximity AX and AZ type switches. *For more details, please download the PDF or feel free to contact us.

• Actuator

This document summarizes information regarding the rack and pinion rotary actuator '35RP2'. It includes various information such as internal structure diagrams for different swing angles, a packing list, and a detailed parts list. Additionally, it contains notes on precautions when installing the valve seal, so please make use of it. [Contents] ■ Swing angle 90° ■ Swing angle 180° ■ Packing list ■ Parts list ■ Precautions *For more details, please download the PDF or feel free to contact us.

• Actuator

This document summarizes information regarding the hydraulic high-low table that we handle. It includes a variety of information such as common precautions for hydraulic high-low tables, features, and selection criteria for sizes. Additionally, it also contains information about the dimensions and accessories of each product. Please make use of it. 【Contents (partial)】 ■ Hydraulic High-Low Table / Common Precautions 1 ■ Hydraulic High-Low Table / Common Precautions 2 ■ Hydraulic High-Low Table / Common Precautions 3 ■ Hydraulic High-Low Table / Common Precautions 4 ■ Hydraulic High-Low Table / Common Precautions 5 *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

We would like to introduce our rack and pinion type rotary actuator, the "HTR/M series." The "HTR series" features high-load tapered roller bearings, chrome alloy steel racks and pinions, and high-strength ductile cast iron housings, making it suitable for a wide range of devices and production equipment. The "M series" adopts a structure that allows for inspection and replacement of the piston packing without disassembling or separating the output shaft, making maintenance easier. 【Features (HTR series)】 ■ It can transmit torque while supporting the load on the output shaft, potentially eliminating the need for external support bearings. ■ By adopting an optional cushioning mechanism, it can reduce external loads. ■ The piston uses durable urethane rubber seals and wear rings. ■ The output shaft employs low-pressure seals. *For more details, please download the PDF or feel free to contact us.

• Actuator

This document is a selection guide for rack and pinion type rotary actuators that we handle. It includes information on selecting sizes for cases where only static forces, such as clamping, are needed, as well as for moving loads, and checks for cushion allowable energy. Additionally, it provides checks for radial and thrust loads, a table for calculating moment of inertia, and examples of selecting rotary actuators. Please make use of it. [Contents (partial)] ■ Size selection ■ Cushion allowable energy check ■ Radial and thrust load checks ■ Moment of inertia calculation table ■ Examples of selecting rotary actuators *For more details, please download the PDF or feel free to contact us.

• Actuator

This document contains common precautions regarding the high-low tar that we handle. It includes a wealth of information on design considerations, selection, installation, piping, lubrication, air quality, and more. Additionally, it provides precautions related to maintenance inspections and usage environments. Please make use of it. [Contents (partial)] ■ Design considerations ■ Selection ■ Installation ■ Piping ■ Oil suction *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog contains information related to "Hydraulic Pumps." It includes a wealth of information such as product features, minimum and maximum rotational speeds, pressure ratings for single, double, and triple pumps. Additionally, recommendations for starting procedures and information on shafts and couplings are also included, so please make use of it. [Contents (partial)] ■Features ■Minimum and maximum rotational speeds - pressure ratings ■Single pumps ■Double and triple pumps ■Minimum allowable suction pressure *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "LSHT Torque Motor" is a compact hydraulic motor that excels in low-speed rotation with high torque. By adopting roller bearings, it demonstrates stable low-speed rotation. Depending on usage, a reduction gear may not be necessary. Additionally, even under overload conditions, it is less prone to damage due to the safety valve, and it is easy to change torque, speed, and direction as options. 【Features】 ■ Long lifespan (oil-cooled structure, high rigidity bearing structure) ■ Stable low-speed rotation (roller bearing adoption) ■ Compact and easy to install ■ No drain piping required (high-pressure shaft seal adopted) ■ High volumetric efficiency (roller bearing adoption) *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "LSHT Low-Speed, High-Torque Hydraulic Motor" is a compact, high-torque hydraulic motor that excels in low rotational speed. There is a constant oil flow in the spline section of the drive link, which is subjected to significant load inside the motor, providing cooling and flushing effects that contribute to a long lifespan. As a global standard, it is adopted in many industries, including construction machinery, special vehicles, forestry machinery, and conveyors. 【Features】 - A constant oil flow exists in the spline section of the drive link, which is subjected to significant load inside the motor, providing cooling and flushing effects that contribute to a long lifespan. - The use of a disc valve and valve seals reduces internal leakage, resulting in excellent performance characteristics at low speeds. - The adoption of high-pressure shaft seals eliminates the need for drain piping. *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment